SEAT 2K2771 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3938 Link Bracket 3 Start By:
Remove the temperature control valve.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the oil from the engine oil filter housing into a suitable container for storage or for disposal.
Illustration 1 g06094597
Remove bolts (1), bolts (4), nuts (2), elbow (3), and the O-ring seals.
Illustration 2 g06094608
Remove bolts (5), stud (6), stud (7), and use two people to remove housing (8) and tubes (9). The approximate weight of housing (8) 25 kg (55 lb).
Illustration 3 g06094687
Attach Tooling (A) and a suitable lifting device to engine oil filter housing (10). The approximate weight of engine oil filter housing (10) 186 kg (410 lb).
Remove bolts (11), bolts (13), and disconnect tubes (13).
Illustration 4 g06094717
Remove bolts (15) and engine oil filter housing (10).