SEAT GP 3209298 - Caterpillar

Illustration 1 g01628111
Illustration 2 g01628112
View A-AWhen the electric starting motor is viewed from the pinion end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25 °C (77 °F) Maximum speed ... 5500 rpm Maximum current draw ... 200 Amp Voltage ... 12 V (B) The clearance between the pinion and the housing ... 8.3 to 9.9 mm (0.33 to 0.39 inch) (1) Final installation torque for the ground terminal nut ... 30.5 3.5 N m (270 30 lb in)Note: A maximum of three cable terminals or wire terminals may be used with the nut. A maximum of two of the terminals may be equal to or greater than 0 AWG. (2) Final installation torque for the battery terminal nut ... 30.5 3.5 N m (270 30 lb in) (3) Final installation torque for the ground terminal nut ... 2.25 0.25 N m (20 2 lb in)Note: The switch terminal must be insulated with heat shrink tubing. Do not use molded terminals. (4) Final installation torque for the switch terminal nut ... 2.25 0.25 N m (20 2 lb in) (5) Final installation torque for the motor frame terminal nut ... 30.5 3.5 N m (270 30 lb in) (6) Final installation torque for the motor terminal nut ... 30.5 3.5 N m (270 30 lb in)Solenoid assemblyCurrent consumption at 12 V and 25 °C (77 °F) Pull-in windings ... 92 Amp Hold-in windings ... 16 Amp