SEAT GP 3247903 - Caterpillar

Reel Out (24C) - Move the lever to the right to reel out the winch cable. The winch cable reels out under power. Speed for the winch cable is proportional to the lever position. Release the lever. The lever will return to the HOLD position.Free Spool (Retrieval Winch)
Illustration 22 g06145943
(A) Retaining Pin
(B) Freespool Lever
Illustration 23 g06145951
(C) Freespool OFF
(D) Freespool ONNote: The hydraulic lockout switch (20) must be in the UNLOCKED position.Freespool is controlled by a lever mounted on the top left-hand side of the winch. To place the winch in Freespool mode, remove the locking pin, lift the lever and rotate the lever as indicated on the instruction decal.To end the Freespool mode, rotate the lever back to non-Freespool position and insert the locking pin.Note: Re-engaging the gears may require rotating the drum slightly by hand.Free Spool and Drive Away (Premium Winch)
Both Free Spool and Drive Away modes have three conditions that must be met to activate the function.
The operator must be present.
The implement lever (24) must be released.
The hydraulic lockout switch (20) must be in the UNLOCKED position.
Free Spool (25) - Press the freespool switch one time to release the winch cable. The winch cable unreels by manually pulling the winch cable. No machine or hydraulic assistance is needed. The winch will remain in the FREE SPOOL position until you press the switch again or the lever is moved from the HOLD position. Only the Premium Winch System has the free spool feature actuated by a switch in the operator's station.Note: Do not activate the winch freespool when the machine is moving.
Drive Away (26) - Press the winch drive away switch one time to activate this mode. This mode allows the operator to drive the tractor away from a load as the winch reels out the cable under power and the cable is attached to the load. Drive away (23) releases the winch brake (BRAKE OFF). Only the Premium Winch System has the drive away feature.Ripper Controls 24 (If Equipped)
Illustration 24 g03675256
RAISE (24A) - Pull the lever to the left to raise the ripper. Release the lever. The lever will return to the HOLD position.
HOLD (24B) - Release the lever. The lever will return to HOLD position. Ripper movement stops in the current position.
LOWER (24C) - Push the lever to the right to lower the ripper. Release the lever. The lever will return to the HOLD position.Auxiliary Control 27 (If equipped)
Illustration 25 g03675266Use auxiliary switch (27) to activate the rear hydraulics when the machine has a winch or a rear attachment.Air Suspension Seat (28)
The air suspension seat offers a safe, comfortable, stable ride that is less fatiguing for the operator.See “Seat” in this manual for more information.Pocket in Seat Back (29)
Place the Operation and Maintenance Manual into the pocket in seat back (29). Hold other pertinent material in this pocket that maintains information that is useful to operate the machine effectively.Power Receptacle (30)
Illustration 26 g03675261Power Receptacle - A 12 V, 10 Amp power receptacle is located inside the storage box on left-hand