3C8072 SEAT GP-BASIC Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8072
3C-8072
3C8072
CA3C8072
3C-8072
3C8072
Weight: 5 pounds 2 kg.
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01175386
Disconnect harness assembly (1) from atmospheric pressure sensor (2).
Remove atmospheric pressure sensor (2) and the O-ring seal. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01175386Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Install the O-ring seal onto atmospheric pressure sensor (2).
Install atmospheric pressure sensor (2) and the O-ring seal. Tighten atmospheric pressure sensor (2) to a torque of 10 2 N m (88 18 lb in).
Connect harness assembly (1) to atmospheric pressure sensor (2).
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01175386
Disconnect harness assembly (1) from atmospheric pressure sensor (2).
Remove atmospheric pressure sensor (2) and the O-ring seal. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01175386Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Install the O-ring seal onto atmospheric pressure sensor (2).
Install atmospheric pressure sensor (2) and the O-ring seal. Tighten atmospheric pressure sensor (2) to a torque of 10 2 N m (88 18 lb in).
Connect harness assembly (1) to atmospheric pressure sensor (2).