SEAT & MOUNTING GP 4568712 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
This procedure is for a left hand serviced oil filter housing.
Illustration 1 g01292977
Illustration 2 g01292983
Attach Tooling (A) and a suitable lifting device to engine oil filter housings (1). The weight of engine oil filter housings (1) is approximately 225 kg (496 lb). Place engine oil filter housings (1) in position on the front of the engine. Install bolts (2).
Connect tube (3) and tube (4) at the fittings on the front housing.
Ensure that all other tubes and hose assemblies have been connected to engine oil filter housings (1). End By:
Install the fuel filter housings. Refer to Disassembly and Assembly, "Fuel Filter Housings - Install".
Install the engine oil coolers. Refer to Disassembly and Assembly, "Engine Oil Coolers - Install".
Install the engine oil filter elements. Refer to Disassembly and Assembly, "Engine Oil Filter Elements - Remove and Install".