SEAT GP 4597003 - Caterpillar

VPAT Bulldozer
Illustration 1 g00868080
110-3269 Lift Cylinder (1) Torque for bolt with lubrication on threads ... 1800 200 N m (1327 147 lb ft) (2) Put clean grease on the threads. Torque for the head ... 600 130 N m (443 95 lb ft) (3) Bore of new cylinder ... 114.30 0.08 mm (4.500 0.003 inch) (4) Bore of new head ... 57.48 0.03 mm (2.263 0.001 inch) (5) Diameter of new rod ... 57.100 0.038 mm (2.248 0.0015 inch) (6) Apply 4C-4032 Sealant to the wiper seal groove prior to assembly.Use the lubricant that is being sealed in order to lubricate the sealing lips in the head.SU-Blade Bulldozer
Illustration 2 g00868086
115-3524 Lift Cylinder (1) Torque for bolt with lubrication on threads ... 1800 200 N m (1327 147 lb ft) (2) Put clean grease on the threads. Torque for crown ... 600 130 N m (443 95 lb ft) (3) Apply 4C-4032 Sealant to the wiper seal groove prior to assembly. (4) Bore of new cylinder ... 95.25 0.08 mm (3.7500 0.003 inch) (5) Put clean grease on the threads. Torque for head ... 600 130 N m (443 95 lb ft) (6) Bore of new head ... 57.43 0.03 mm (2.3 0.001 inch) (7) Diameter of new rod ... 57.100 0.038 mm (2.248 0.0015 inch) (8) Refer to the Procedure for Shimming in this manual for the adjustment procedure.Use the lubricant that is being sealed in order to lubricate the sealing lips in the head.Procedure for Shimming
Illustration 3 g00494467
Remove all the shims from assembly (1) .
Install assembly (1) and cap (2) on trunnion (3) without the shims. Tighten the bolts and maintaining equal distance on both sides of the cap.
Insert as many shims as possible into spaces (A) and (B) between the cap and the assembly.
Add two additional shims to the total shims that are used.
Install half the shims at location (A) and install the other half at location (B). Tighten the bolts to the proper torque.
This allows the assembly to move on the trunnion freely within the specified tolerance.