SEAT GP-SUSPENSION 4853443 - Caterpillar

Illustration 1 g01437898
The "Operator" menu allows the user to choose from a variety of functions to create a specific profile that includes the following options: Select, Edit, Create, Delete and Save. The operator may reset a profile back to the "default settings". The operator may also recall the previous profile.An operator profile is an individual set of preferences that is identified by a name. After the profile is created, the operator may set various modes to suit an individual preference. This includes the following settings: implement, display and power train. After all of the parameters have been adjusted to the operator's preference, the operator may then save the parameters for future use.
Illustration 2 g01365933
The "Operator Select Profile" option is entered by selecting "Operator" from the "Home" menu. Press the up arrow button or the down arrow button until "Operator" is highlighted. Then press the "OK" button. Refer to Illustration 3. Note: The "Home " menu can be displayed from any screen by pressing the "Home" button. The following screen will now be displayed.
Illustration 3 g01351231
The "Operator" menu options and contents are listed below:
"Select Profile"
"View/Save Current"
"Create Profile"
"Delete Profile"
"Factory Settings"The following explains the usage of each menu option."Select Profile"
From the "Operator" menu, use the appropriate arrow button to highlight the "Select Profile" option. Then press the "OK" button in order to display a list of existing profiles. Again, use the appropriate arrow button to highlight the desired profile. Then press the "OK" button in order to select that profile. This procedure will cause the selected profile and the associated settings to be the active profile. The machine operation will reflect these settings.Note: A maximum of 10 profiles may be used."View/Save Current"
From the "Operator" menu, use the appropriate arrow button to highlight the "View/Save Current" option. Press the "OK" button in order to view the settings that are associated with the current profile. This procedure will cause the current settings of the selected profile to be displayed on the screen. The settings that are displayed are the current settings. These settings will reflect any overrides that have been made to the settings which were stored in memory, even if the settings have not been saved. The operator may exit this display without saving the overrides to memory or the operator may save the overrides to memory. The operator should next exit the display by following the prompts on the screen. In either case, the machine operation will reflect these settings. If the settings are not saved, the overrides will not be active when this profile is recalled."Create Profile"
From the "Operator" menu, use the appropriate arrow button to highlight the "Create Profile" option. Then press the "OK" button in order to display the "Create Profile" screen. Follow the prompts on the screen in order to create a new name. Save the name to the existing list of profiles. This procedure creates a profile. The "Settings" menu can then be used to adjust parameters. These parameters may then be associated to the new profile. Use the