SEAT & MOUNTING GP 4896525 - Caterpillar

Idle Cylinder Cutout Enable Status
This feature is used to improve stability during low fuel/low speed operation. Enable this feature only if stability issues cannot be resolved using the governor gain settings during low fuel/low speed operation.System Settings
Full Load Setting (FLS)
The value of this parameter represents the adjustment to the fuel system that was made at the factory. The FLS is used to fine-tune the fuel system. The correct value for this parameter is stamped on the engine information plate. Factory passwords are required.Full Torque Setting (FTS)
"FTS" is similar to "FLS". Factory passwords are required.Security Access Parameters
Total Tattletale
This item displays the number of changes that have been made to the configuration parameters. Parameter Table
Table 2
System Configuration Parameters    
Parameter    Default    Range    
ECM Identification Parameters    
Equipment ID (1)     Blank     17 alphanumeric numbers    
Engine Serial Number (1)     Blank     8 alphanumeric numbers    
ECM Serial Number (2)