SEAT BELT GP 5269181 - Caterpillar

Installation Procedure
Illustration 1 g01079391
Use a suitable lifting device to position generator (12) and the shock absorbers on bracket (10). The weight of the generator is approximately 72 kg (159 lb). Install bolts (18).
Position seal (17), duct assembly (16), and electrical box (6) on generator (12) and install bolts (15).
Install terminal bushing (14) in electrical box (6) and install the locknut.
Position motor (1) on generator (12) and install nuts (19).
Illustration 2 g01079258
Use a suitable lifting device in order to position bracket (10) and generator (12) in the machine. The weight of the bracket and generator is approximately 85 kg (187 lb). Install bolts (9) and (13).
Connect harness assembly (11).
Illustration 3 g01079257
Install terminal bushing (7) and harness assembly (8) in electrical box (6) and install the locknut.
Illustration 4 g01079256
Connect wires (3) and (5) to circuit breaker (4).
Close the lid for electrical box (6) and install the screws.
Close the rear access door that is located on the right side of the machine.
Illustration 5 g01079252
Install hose assemblies (2) on motor (1).
Close the access door that is located between the operator platforms.