SEAT 6F7808 - Caterpillar

Illustration 1 g03506494
(1) Fan speed solenoid.
Illustration 2 g03506319
View of the front of the radiator
(1) Oil cooler
(2) Exit hose for oil to return to tank
(3) Cooler bypass valve
(4) Gear motor (Hydraulic fan)
(5) Check valve
(6) Sensor
(7) Inlet hose from hydraulic fan
(8) Hose to drain
(9) Bypass valve Oil from the gear motor (hydraulic fan) (5) enters the cooler system at hose (7). Oil flows from hose (2) through the return filter and into the hydraulic tank. Bypass valve (3) will open when the oil flow becomes too restrictive. Bypass valve (3) will direct oil around the cooler to hose (2).Temperature sensor (6) sends a voltage signal to the engine Electronic Control Module (ECM). The engine ECM calculates the oil temperature by comparing the voltage signal to a predetermined set of values.Sensors
Illustration 3 g03505908
(10) Inlet air temperature sensor
Illustration 4 g03505909
View of the engine from the left side
(11) Coolant temperature sensor The engine coolant temperature sensor (11) sends a signal to the engine ECM in order to control the speed of the hydraulic fan.
Illustration 5 g03605057
(12) Fan speed solenoid The inlet air temperature sensor (10) sends a signal to the engine ECM in order to control the speed of the hydraulic fan. The fan speed solenoid (12) controls the displacement of the braking and the hydraulic fan pump. The fan speed solenoid (12) receives a signal from the engine ECM.