SEAT 6S3900 - Caterpillar

Illustration 4 g00306083
Improper lift rigging can allow unit to tumble causing injury and damage.
Before lifting the engine, read this Operation and Maintenance Manual, "Engine Lifting" topic (Operation Section).If improper equipment is used to lift the engine, injury and damage can occur. Use cables that are properly rated for the weight. Use a spreader bar and attach the cables according to the information on the warning label.Fuel Injectors (3)
Illustration 5 g01522200
(3) Warning about electrical shocks The safety message for the fuel injectors is located on the electronic control module (ECM) and the valve covers .
Illustration 6 g00103125
Electrical shock hazard. The electronic unit injector system uses 90-120 volts.
The ECM sends a high voltage signal to the fuel injectors. To help prevent personal injury, disconnect the fuel injector connector. Do not come in contact with the harness connector for the fuel injector while the engine is operating.Type 2 (If Equipped)
These safety messages are correct for current engines.
Illustration 7 g01521985
(4) Universal warning
(5) Warning about hot surfaces
(6) Warning about hot surfaces
Illustration 8 g01521986
(4) Universal warning
(5) Warning about hot surfaces
(6) Warning about hot surfaces Universal Warning (4)
One universal warning is located on the front base for the valve cover on each side of the engine. One universal warning is located on the rear base for the valve cover on each side of the engine.
Illustration 9 g01370904
Do not operate or work on this engine or generator set unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals.Failure to follow the warnings and instructions could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Hot Surface (5)
One warning about hot surfaces is located on the oil cooler on the right side of the engine. One warning about hot surfaces is located on the crankcase cover on the left side of the engine.
Illustration 10 g01384734
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Hot Surface (6)
One warning about hot surfaces is located on the number 9 base for the valve cover. One warning about hot surfaces is located on the number 10 base for the valve cover.
Illustration 11 g01372256
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.