AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

320B EXCAVATOR WITH FIELD INSTALLED COMBINED/ROTATE FUNCTION 6CR00001-UP (MACHINE) ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



EXCAVATOR 320B L EXCAVATOR 6CR
 320B EXCAVATOR WITH FIELD INSTALLED COMBINED/ROTATE FUNCTION 6CR00001-UP (MACHINE) SEBC0537 320B L 6CR   (1996)

Parts group 320B L:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
CIRCUIT BREAKER GP
PANEL GP
166-8059 PANEL GP
CP-1668059 PANEL GP
CONTROL GP-ELECTRONIC
MOUNTING GP-CONTROL
138-4670 MOUNTING GP-CONTROL
CP-1384670 MOUNTING GP-CONTROL
AUXILIARY (FIELD)
PANEL GP-FUSE
PANEL GP
166-8059 PANEL GP
CP-1668059 PANEL GP
SWITCH GP
CONTROL GP-AUXILIARY HYDRAULIC
138-4653 CONTROL GP-AUXILIARY HYDRAULIC
CP-1384653 CONTROL GP-AUXILIARY HYDRAULIC
FOOT
WIRING GP
INSTALLATION AR
153-4111 INSTALLATION AR
CP-1534111 INSTALLATION AR
(320B)
HARNESS AS
153-4109 HARNESS AS
CP-1534109 HARNESS AS.
HARNESS AS
153-4110 HARNESS AS
CP-1534110 HARNESS AS
PART OF 1534111
HARNESS AS
133-0958 HARNESS AS
CP-1330958 HARNESS AS.
HARNESS AS
137-6946 HARNESS AS
CP-1376946 HARNESS AS.
HARNESS AS
136-1208 HARNESS AS
CP-1361208 HARNESS AS.
HARNESS AS
162-3219 HARNESS AS
CP-1623219 HARNESS AS.
141-5401 WIRING GP-AUXILIARY CONTROL
CP-1415401 WIRING GP-AUXILIARY CONTROL
ROTATOR
HARNESS AS
141-5403 HARNESS AS
CP-1415403 HARNESS AS
HARNESS AS
167-1062 HARNESS AS
CP-1671062 HARNESS AS.

Information:

(For parts list, see above)

Special Instruction
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Operation and Maintenance Manual
Travel Alarm - Test - If Equipped
320B, 320B L and 320B N Excavators
Travel Alarm - If Equipped
320B, 320B L and 320B N Excavators
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406}
Installation of 262-6141 Alarm Gp {7406}
Testing and Adjusting
Travel Alarm Is Abnormal - Troubleshoot - 4108
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
320B, 320B L and 320B N Excavators
Special Instruction
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Alternator and Regulator
3064 and 3066 Engines for Caterpillar Built Machines
Alternator and Regulator
3064 and 3066 Engines for Caterpillar Built Machines
Information Release Memo
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
Testing and Adjusting
Charging System - Test
3064 and 3066 Engines for Caterpillar Built Machines
Battery Voltage Is Abnormal - Troubleshoot - 1305, 4101, 420C And 420D
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Alternator - Test
3064 and 3066 Engines for Caterpillar Built Machines
Troubleshooting
MID 124 - CID 0168 - FMI 00
Machine Security System
MID 124 - CID 0168 - FMI 01
Machine Security System
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Disassembly and Assembly
Alternator
SUPPLEMENT FOR 320 & 320 L EXCAVATORS (3066 ENGINE)
Alternator
3066 ENGINE SUPPLEMENT FOR 320B EXCAVATOR FAMILY
Alternator - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Service Magazine
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Cat<SUP>&reg;</SUP> Reman Has Added Alternators and Starting Motor Groups for Certain Machine Engines {1405, 1453}
2014/08/08
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Engine News
Operation and Maintenance Manual
Fuses - Replace
320B, 320B L and 320B N Excavators
Battery or Battery Cable - Inspect/Replace
320B, 320B L and 320B N Excavators
Battery - Clean
320B, 320B L and 320B N Excavators
Battery Hold-Down - Tighten
320B, 320B L and 320B N Excavators
Battery - Recycle
320B, 320B L and 320B N Excavators
Fuses - Replace
320B, 320B L and 320B N Excavators
Technical Information Bulletin
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Testing and Adjusting
Battery Voltage Is Abnormal - Troubleshoot - 1305, 4101, 420C And 420D
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Battery - Test
3064 and 3066 Engines for Caterpillar Built Machines
Troubleshooting
MID 124 - CID 0168 - FMI 00
Machine Security System
MID 124 - CID 0168 - FMI 01
Machine Security System
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Electrical Power Supply - Test
MSS3s Machine Security System
Service Magazine
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/07/14
New Switch Assembly in Breaker Panel Groups Improves Reliability of Main Power Relay {1417,1423}
1999/06/28
Special Instruction
Troubleshooting Guide for 122-9897 Implement Electronic Control Module {5702}
Troubleshooting Guide for 122-9897 Implement Electronic Control Module {5702}
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
Using The Electronic Monitor Panel To Determine The Amount Of Fuel In The Fuel Tank{5258,7451,7481,7490}
1997/10/13
The Correct Procedure For Starting The Engine Provides Accurate Prestart Fluid Level Monitoring On Electronic Monitor {7490,1416}
1998/11/23
Using The Electronic Monitor Panel To Determine The Amount Of Fuel In The Fuel Tank{5258,7451,7481,7490}
1999/04/05
Excavator Magnet Warning Change {5702}
1999/10/18
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620}
2014/02/06
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Truck Engine News
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
Engine News
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/01
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Service Magazine
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Testing and Adjusting
Controller - Replace
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Electrical Connector - Inspect
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Service Magazine
Excavator Magnet Warning Change {5702}
1999/10/18
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Instructions for Changing the Operating Language of the DASA Computer{7600}
Instructions for Changing the Operating Language of the DASA Computer{7600}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
Technical Information Bulletin
300 B SERIES EXCAVATORS AUXILIARY CONTROLLER MALFUNCTIONS
300 B SERIES EXCAVATORS AUXILIARY CONTROLLER MALFUNCTIONS
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
Systems Operation
Travel Counterbalance Valve
320B Excavator Hydraulic System
General Information (Electronic Control System)
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine and Hydraulic Pump Controller
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Related Components
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Normal Operation
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Power Mode Operation
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Automatic Engine Control
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
One Touch Low Idle
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Additional Functions
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Work Mode
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Operation of Status Indicator
Machine Security System
Protected Functions
Machine Security System
Diagnostic Operation
Machine Security System
Events
Machine Security System
Service Operation Using Machine Security System
Machine Security System
Key Information
Machine Security System
Service Operation Using Service Tool
Machine Security System
Electronic Control Module (ECM)
Machine Security System
System Overview
Machine Security System
Scheduled Access - "Security System Bypass Times"
Machine Security System
General Information
Machine Security System
Normal Operation
Machine Security System
System Components
Machine Security System
Cat Data Link
Machine Security System
General Information
MSS3s Machine Security System
System Overview
MSS3s Machine Security System
Normal Operation
MSS3s Machine Security System
Operation of Status Indicator
MSS3s Machine Security System
Key Information
MSS3s Machine Security System
Scheduled Access - "Security System Bypass Times"
MSS3s Machine Security System
Diagnostic Operation
MSS3s Machine Security System
Events
MSS3s Machine Security System
Protected Functions
MSS3s Machine Security System
Service Operation Using Machine Security System
MSS3s Machine Security System
Service Operation Using Service Tool
MSS3s Machine Security System
Electronic Control Module (ECM)
MSS3s Machine Security System
System Components
MSS3s Machine Security System
Data Links
MSS3s Machine Security System
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
Testing and Adjusting
No Power Supply to Controller - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Communication Problem Between Controller and Monitor - Troubleshoot - A201, A202 And A203
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
AEC Is Abnormal - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Check of Feedback Signal From Governor Actuator - Troubleshoot - 2201, 2202, 2301 And 2302
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controllability Is Bad in Boom Priority Mode - Troubleshoot - 4105
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Stick Moves Slowly - Troubleshoot - 4106
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Swing Torque Is Weak in Swing Priority Mode - Troubleshoot - 4105
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Automatic Travel Speed Change Is Abnormal - Troubleshoot - 4107, 4204 And 4207
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Swing Is Inoperable - Troubleshoot - 410A
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Calibration Data Error - Troubleshoot - 2304
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine Stalls - Troubleshoot - 4303
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Initial Troubleshooting Procedure
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
General Information
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controller Input and Output Values
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Using Service Mode
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Parameter Status Checks
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Real Time Error Codes
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Error Log
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Digital Output On/Off - Test
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Parameter - Adjust
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controller - Replace
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
System Schematic
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Troubleshooting Undiagnosed Problems
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Hydraulic Hammer - Adjust
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Troubleshooting Diagnostic Codes
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Glossary of Terms
Machine Security System
Key - Program
Machine Security System
System Disarm - Program - Security System Bypass
Machine Security System
General Information
Machine Security System
Electronic Control Module (ECM) - Replace
Machine Security System
Software - Uninstall - "Immobilizer" Feature
Machine Security System
Time - Set
Machine Security System
Product Identification Number - Program
Machine Security System
Electronic Control Module (ECM) - Flash Program
Machine Security System
Factory Password - Obtain
Machine Security System
Controller - Replace
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
General Information
MSS3s Machine Security System
Product Identification Number - Program
MSS3s Machine Security System
Key - Program
MSS3s Machine Security System
System Disarm - Program - Security System Bypass
MSS3s Machine Security System
Factory Password - Obtain
MSS3s Machine Security System
Time - Set
MSS3s Machine Security System
Glossary of Terms
MSS3s Machine Security System
Software - Uninstall - "Immobilizer" Feature
MSS3s Machine Security System
Troubleshooting
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Machine Security System
Lost Key
Machine Security System
Diagnostic Code List
Machine Security System
General Information
Machine Security System
Engine Does Not Crank and Status Indicator Is Green
Machine Security System
Engine Does Not Start and Status Indicator Is Continuously Red
Machine Security System
MID 124 - CID 0248 - FMI 12
Machine Security System
MID 124 - CID 0817 - FMI 04
Machine Security System
MID 124 - CID 1391 - FMI 03
Machine Security System
MID 124 - CID 1391 - FMI 04
Machine Security System
MID 124 - CID 1392 - FMI 03
Machine Security System
MID 124 - CID 1392 - FMI 04
Machine Security System
Lost Key (MSS)
MSS3s Machine Security System
Engine Does Not Crank and Status Indicator Is Green
MSS3s Machine Security System
Engine Does Not Start and Status Indicator Is Continuously Red
MSS3s Machine Security System
ECM Output Driver - Test
MSS3s Machine Security System
ECM Software - Install
MSS3s Machine Security System
ECM - Replace
MSS3s Machine Security System
ECM - Configure
MSS3s Machine Security System
Service Magazine
New Keypads Are Used {7490}
2001/05/14
Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631}
2001/04/09
Correction to Systems Operation/Testing and Adjusting , "Using Service Mode" {7569}
2002/07/15
New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/07/14
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Technical Information Bulletin
A Defective Rotary Dial Switch In The Monitor For The Solid State Magnet Controller May Prevent A Clean Material Drop For Certain Material Handlers
A Defective Rotary Dial Switch In The Monitor For The Solid State Magnet Controller May Prevent A Clean Material Drop For Certain Material Handlers
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Electronic Control Module (ECM) - Replace
Machine Security System
Electronic Control Module (ECM) - Flash Program
Machine Security System
Service Magazine
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Special Instruction
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat<SUP>&reg;</SUP> Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Special Instruction
Installing and Operating the Generator{1404}
Installing and Operating the Generator{1404}
Technical Information Bulletin
Incorrect Setting of the Timer Relay for the Generator Soft Start Solenoid{4450, 7610}
Incorrect Setting of the Timer Relay for the Generator Soft Start Solenoid{4450, 7610}
Systems Operation
Hydraulic Operation
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
General Information
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Testing and Adjusting
Controller - Set
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Magnet - Check
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Generator Set - Test and Adjust
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
System Schematic
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Programmable Logic Controller - Replace
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Troubleshooting
Magnet Does Not Lift Material
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Magnet Does Not Drop Material
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
General Information
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Material Is Not Dropped Correctly
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Service Magazine
Excavator Magnet Warning Change {5702}
1999/10/18
Correction to Service Magazine, &quot;Improved 24 Volt Horns Available&quot; {7402}
2001/08/20
Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606}
2006/11/13
Special Instruction
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Service Magazine
A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
2011/06/29
An Improved Halogen Lamp is Now Available for Certain Excavators {1434}
2015/09/11
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
An Improved Starting Motor is Now Available {1453}
2009/10/15
A New Starter Solenoid is Now Available {1467}
2008/03/17
Operation and Maintenance Manual
Circuit Breakers - Reset
320B, 320B L and 320B N Excavators
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Magazine
New Switch Assembly in Breaker Panel Groups Improves Reliability of Main Power Relay {1417,1423}
1999/06/28
A New Electronic Controller for the Air Inlet Heater (AIH) Improves the Engine Starting Ability {1058, 7490}
2001/08/13
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Magazine
New Switch Assembly in Breaker Panel Groups Improves Reliability of Main Power Relay {1417,1423}
1999/06/28
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Specifications
Engine Oil Pressure Sender
3064 and 3066 Engines for Caterpillar Built Machines
Systems Operation
Senders
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Sensors
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Testing and Adjusting
Check of Speed Sensor - Troubleshoot - 4201 And 4302
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Speed Sensor - Replace
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Troubleshooting
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Service Magazine
The Improved Pressure Sensor Increases Reliability and Durability {5574}
2000/07/31
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Disassembly and Assembly
Shutoff Solenoid
SUPPLEMENT FOR 320 & 320 L EXCAVATORS (3066 ENGINE)
Solenoid Valves
320B, 320B L,320B LN, 320B N, & 320B S EXCAVATORS MACHINE SY
Service Magazine
A New Mechanically Sealed Coil Has Improved Moisture Integrity Which Will Help to Extend the Life of the Coil {1554}
2002/03/25
Disassembly and Assembly
Shutoff Solenoid
SUPPLEMENT FOR 320 & 320 L EXCAVATORS (3066 ENGINE)
Fuel Shutoff Solenoid - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Air Heater
SUPPLEMENT FOR 320 & 320 L EXCAVATORS (3066 ENGINE)
Air Inlet Heater - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Service Magazine
A New Electronic Controller for the Air Inlet Heater (AIH) Improves the Engine Starting Ability {1090}
2003/02/03
A New Electronic Controller for the Air Inlet Heater Improves the Engine Starting Ability {1090}
2003/03/24
A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/19
Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
3064 and 3066 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Disassembly, Assembly, Testing, and Salvage of Starting Motor for 3046, 3064, and 3066 Engines {1453}
Disassembly, Assembly, Testing, and Salvage of Starting Motor for 3046, 3064, and 3066 Engines {1453}
Information Release Memo
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 &amp; C3.4 ENGINES
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
Testing and Adjusting
Pinion Clearance - Adjust
3064 and 3066 Engines for Caterpillar Built Machines
Electric Starting System - Test
3064 and 3066 Engines for Caterpillar Built Machines
Disassembly and Assembly
Starter
SUPPLEMENT FOR 320 & 320 L EXCAVATORS (3066 ENGINE)
Electric Starting Motor
3066 ENGINE SUPPLEMENT FOR 320B EXCAVATOR FAMILY
Electric Starting Motor - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Service Magazine
Examine Failed Starting Motors to Understand the Reason for Failure {1453}
2002/10/28
Cat<SUP>&reg;</SUP> Reman Has Added Alternators and Starting Motor Groups for Certain Machine Engines {1405, 1453}
2014/08/08
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Operation and Maintenance Manual
Light Switches
320B, 320B L and 320B N Excavators
Engine Start Switch
320B, 320B L and 320B N Excavators
Battery Disconnect Switch
320B, 320B L and 320B N Excavators
Light Switches
320B, 320B L and 320B N Excavators
Special Instruction
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Repair/Replacement Procedure for <NOBR> 5C-6108</NOBR> Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Technical Information Bulletin
Check For Correct Operation Of Oil Level Switch
Check For Correct Operation Of Oil Level Switch
Machine Start Switch Key May Not Fit Properly{1416}
Machine Start Switch Key May Not Fit Properly{1416}
Specifications
Engine Oil Pressure Switch
3064 and 3066 Engines for Caterpillar Built Machines
Coolant Temperature Switch
3064 and 3066 Engines for Caterpillar Built Machines
Systems Operation
Switches
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Testing and Adjusting
Low Idle Switch Does Not Work - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Disassembly and Assembly
Coolant Temperature Switch - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Engine Oil Pressure Switch - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Service Magazine
The Correct Procedure For Starting The Engine Provides Accurate Prestart Fluid Level Monitoring On Electronic Monitor {7490,1416}
1998/11/23
Illuminated Rocker Switch Assemblies Available As Serviced Components {7332,1435}
1998/12/07
New Switch Assembly in Breaker Panel Groups Improves Reliability of Main Power Relay {1417,1423}
1999/06/28
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
The Oil Level Switch for the Engine Oil and for the Hydraulic Oil Is Improved {1302, 5056, 7422}
2002/11/11
Key Must Be Oriented Correctly in Order to Avoid Damage to the Key or Start Switch {1416}
2003/10/27
Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2007/07/23
Troubleshooting Procedure for the Engine Oil Pressure Switch {1403, 1408}
2007/08/06
New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/07/14
Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}
2009/05/04
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/07/18
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
Engine News
The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
2004/04/01
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785}
2006/02/13
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
2006/10/16
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/01
Special Instruction
An Aid To Reading Multimeter Scales{0785}
An Aid To Reading Multimeter Scales{0785}
Tool Operating Manual
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Service Tools
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Troubleshooting
Service Tools
Machine Security System
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Machine Security System
Service Tools
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Service Tools
Product Link - PL522/523
Service Tools
Product Link 121S/300
Service Tools
MSS3s Machine Security System
Service Magazine
Use 136-7205 Extension Cable For Monitors{0740,0779}
1998/03/09
Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785}
2002/08/19
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/12/01
New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
2006/09/25
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Systems Operation
Solenoid Valve (Proportional Reducing)
320B Excavator Hydraulic System
Solenoid Valves
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Testing and Adjusting
Check Overcurrent at Proportional Reducing Valve - Troubleshoot - 4102
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Check Open Circuit at Proportional Reducing Valve - Troubleshoot - 4103
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Check Short Circuit of Proportional Reducing Valve to Battery Voltage - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Proportional Reducing Valve Sweep - Test
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Proportional Reducing Valve - Calibrate
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Disassembly and Assembly
Solenoid Valves
320B, 320B L,320B LN, 320B N, & 320B S EXCAVATORS MACHINE SY
Service Magazine
Quieter Solenoid Valve For Swing Parking Brake {5479,5483}
1997/12/01
A New Coil Assembly is Now Used {5479}
2009/02/09
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Operation and Maintenance Manual
Service Hour Meter
320B, 320B L and 320B N Excavators
Power Receptacle - If Equipped
320B, 320B L and 320B N Excavators
Engine Start Switch
320B, 320B L and 320B N Excavators
Window Wiper and Washer Control
320B, 320B L and 320B N Excavators
Fuses - Replace
320B, 320B L and 320B N Excavators
Battery Disconnect Switch
320B, 320B L and 320B N Excavators
Window (Power) - If Equipped
320B, 320B L and 320B N Excavators
Battery or Battery Cable - Inspect/Replace
320B, 320B L and 320B N Excavators
Window Wiper and Washer Control
320B, 320B L and 320B N Excavators
Battery - Recycle
320B, 320B L and 320B N Excavators
Fuses - Replace
320B, 320B L and 320B N Excavators
Special Instruction
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Technical Information Bulletin
Refrigerant Compressors May Fail
Refrigerant Compressors May Fail
Check For Correct Operation Of Oil Level Switch
Check For Correct Operation Of Oil Level Switch
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Switches
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Sensors
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Senders
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Monitoring System
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Check of Speed Sensor - Troubleshoot - 4201 And 4302
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine Speed Dial Does Not Work - Troubleshoot - 420E And 2303
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Low Idle Switch Does Not Work - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Electrical Components And Connector Locations
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Controller Connector Contact Identification
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Engine Speed Dial Setting - Check
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
System Schematic
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Harness and Wire Identification
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Speed Sensor - Replace
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
System Schematic
Machine Security System
Electric Starting System - Test
3064 and 3066 Engines for Caterpillar Built Machines
Controller - Replace
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Electrical Connector - Inspect
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Electrical Connector - Inspect
Machine Security System
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
System Schematic
MSS3s Machine Security System
Troubleshooting
Indicator for Volts Fault
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Indicator for Positive Ground Fault
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Indicator for Generator Hot
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Indicator for Over 75% Duty Cycle
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Indicator for Negative Ground Fault
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller
Electrical Component and Connector Locations
Machine Security System
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Cat Data Link - Test
MSS3s Machine Security System
Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System
Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System
Connector Locations
MSS3s Machine Security System
Connector Contact Description
MSS3s Machine Security System
Electrical Connector - Inspect
MSS3s Machine Security System
Service Magazine
Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07
Illuminated Rocker Switch Assemblies Available As Serviced Components {7332,1435}
1998/12/07
New Switch Assembly in Breaker Panel Groups Improves Reliability of Main Power Relay {1417,1423}
1999/06/28
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09
The Main Power Relay Has Improved Sealing {1423}
2009/05/18
An Improved Expansion Tank Assembly Is Now Used {1353, 1374, 1408}
2004/12/20
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2007/07/23
Troubleshooting Procedure for the Engine Oil Pressure Switch {1403, 1408}
2007/08/06
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/07/14
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Service Magazine
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Monitoring System
320B, 320B L and 320B N Excavators
Clock Adjustment
320B, 320B L and 320B N Excavators
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation of Cat<SUP>&reg;</SUP> Terrain for Excavators{7605}
Installation of Cat® Terrain for Excavators{7605}
Installation of G610 Hardware for Cat<SUP>&reg;</SUP> Terrain for Excavators{7605}
Installation of G610 Hardware for Cat® Terrain for Excavators{7605}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation Of Operator ID System on Cat<SUP>&reg;</SUP> and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Technical Information Bulletin
Check For Correct Operation Of Oil Level Switch
Check For Correct Operation Of Oil Level Switch
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Tool Operating Manual
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
Using The Electronic Monitor Panel To Determine The Amount Of Fuel In The Fuel Tank{5258,7451,7481,7490}
1997/10/13
The Correct Procedure For Starting The Engine Provides Accurate Prestart Fluid Level Monitoring On Electronic Monitor {7490,1416}
1998/11/23
Using The Electronic Monitor Panel To Determine The Amount Of Fuel In The Fuel Tank{5258,7451,7481,7490}
1999/04/05
New Operator Monitor Group Includes A Serviceable Cover {7490}
1999/09/06
New Operator Monitor Group Includes A Serviceable Cover {7490}
1999/11/15
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Improved VisionLink<SUP>TM</SUP> Software Is Now Available for Certain Caterpillar Machines {7601}
2012/09/11
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620}
2012/12/10
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/22
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
New Phone Number for VIMS Support Is Now Available for All Cat<SUP>&reg;</SUP> Products Equipped with VIMS {7601}
2015/03/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
Specifications
Air Inlet Heater
3064 and 3066 Engines for Caterpillar Built Machines
Disassembly and Assembly
Air Heater
SUPPLEMENT FOR 320 & 320 L EXCAVATORS (3066 ENGINE)
Air Inlet Heater - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Service Magazine
Block Heaters Are Now Available {1383}
2011/04/06
A New Electronic Controller for the Air Inlet Heater (AIH) Improves the Engine Starting Ability {1090}
2003/02/03
A New Electronic Controller for the Air Inlet Heater Improves the Engine Starting Ability {1090}
2003/03/24
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Systems Operation
Auxiliary Hydraulic Electronic Control System
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Testing and Adjusting
Auxiliary Hydraulic Electronic Control System - Test and Reprogram
320B, 322B, 325B, 330B, 345B and 345B Series II Excavators Auxiliary Hydraulic System
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Engine News
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
Operation and Maintenance Manual
Product Link
Product Link - PL121, PL321, PL522, and PL523
General Hazard Information
Product Link - PL121, PL321, PL522, and PL523
Safety Signs and Labels
Product Link - PL121, PL321, PL522, and PL523
Special Instruction
Installation Instructions For Product Link 101 Inline Timer{7602}
Installation Instructions For Product Link 101 Inline Timer{7602}
Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620}
Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620}
Product Link PL-102C System Installation{7606}
Product Link PL-102C System Installation{7606}
Product Link PL-102C{7602}
Product Link PL-102C{7602}
Installation Guide for Product Link PL121SR and PL321{7606}
Installation Guide for Product Link PL121SR and PL321{7606}
Product Link PL121SR{7606}
Product Link PL121SR{7606}
Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}
Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Product Link<SUP>TM</SUP> PL421 Installation Quick Reference Guide{7606}
Product LinkTM PL421 Installation Quick Reference Guide{7606}
Installation of Remote Disable Module (RDM) Kit on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Service Letter-NACD
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
Service Letter-Australia
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
Service Letter-CFEL
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
Service Letter-CSARL
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
Service Letter-Americas
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
Service Letter-Truck/Ag/Marine
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
Technical Information Bulletin
Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606}
Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606}
Product Link Antenna Placement{7606}
Product Link Antenna Placement{7606}
Product Link Hours Versus Service Meter Hours Accuracy Issue{7606}
Product Link Hours Versus Service Meter Hours Accuracy Issue{7606}
Product Link Registration Problems{733T, 7606}
Product Link Registration Problems{733T, 7606}
Product Link PL321 May Accumulate 24 Hours Daily{7606}
Product Link PL321 May Accumulate 24 Hours Daily{7606}
Registration of Product Link in EquipmentManager{7606}
Registration of Product Link in EquipmentManager{7606}
Location Updates Are Not Being Reported From The Product Link PL321{7606}
Location Updates Are Not Being Reported From The Product Link PL321{7606}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat<SUP>&reg;</SUP> Machines Equipped With VIMS3G{7601, 7620}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620}
Improper Customer Access and Asset Merging Within VisionLink<SUP>TM</SUP> and PartStore<SUP>TM</SUP> Through UCID Consolidation{7567, 7606}
Improper Customer Access and Asset Merging Within VisionLinkTM and PartStoreTM Through UCID Consolidation{7567, 7606}
Product Link Machine Information Is Not Being Reported On Cat<SUP>&reg;</SUP> Products Located in India{7606}
Product Link Machine Information Is Not Being Reported On Cat® Products Located in India{7606}
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Letter-China
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
Service Letter-Asia
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
Systems Operation
System Overview
Product Link 121S/300
Manage Hardware
EquipmentManager Dealer Administrator Manual
Manage Time Fence and Geographic Fence
EquipmentManager User Guide
Manage Planned Maintenance
EquipmentManager User Guide
Time Fence and Geographic Fence
EquipmentManager Dealer Administrator Manual
Health Watch
EquipmentManager Dealer Administrator Manual
Product Monitoring
EquipmentManager Dealer Administrator Manual
Operation and Maintenance Manual
EquipmentManager User Guide
Equipment Usage
EquipmentManager User Guide
Verify Machine Records and Ownership
EquipmentManager User Guide
Manage Equipment Groups
EquipmentManager User Guide
Fuel Results
EquipmentManager User Guide
Planned Maintenance
EquipmentManager User Guide
General Information
EquipmentManager Dealer Administrator Manual
Getting Started
EquipmentManager User Guide
Enable Program
EquipmentManager Dealer Administrator Manual
Manage Users
EquipmentManager Dealer Administrator Manual
Product Link Installation
EquipmentManager User Guide
Setup Subscriptions
EquipmentManager Dealer Administrator Manual
Administration
EquipmentManager Dealer Administrator Manual
Manage Equipment Groups
EquipmentManager Dealer Administrator Manual
Manage Event Tracking
EquipmentManager Dealer Administrator Manual
Upload Data
EquipmentManager User Guide
Manage Planned Maintenance
EquipmentManager Dealer Administrator Manual
Preferences
EquipmentManager Dealer Administrator Manual
Asset Watch
EquipmentManager User Guide
Maintenance Watch
EquipmentManager User Guide
Major Repair
EquipmentManager User Guide
Fault Codes
EquipmentManager User Guide
Preference Detail
EquipmentManager Dealer Administrator Manual
Reports
EquipmentManager User Guide
Active Fleet
EquipmentManager Dealer Administrator Manual
Product Usage
EquipmentManager User Guide
Verify Machine Records and Ownership
EquipmentManager Dealer Administrator Manual
Manage Major Repair Tracking
EquipmentManager User Guide
System Overview
Product Link - PL522/523
System Components
Product Link - PL522/523
Configuration
Product Link - PL522/523
Installation Parameters Configure
Product Link - PL522/523
Spare Input Configure
Product Link - PL522/523
Commands
Product Link - PL522/523
System Components
Product Link 121S/300
Spare Inputs
Product Link 121S/300
Configuration
Product Link 121S/300
Installation Parameters Configure
Product Link 121S/300
Report Parameters Configure
Product Link 121S/300
Wireless Service Configure
Product Link 121S/300
Spare Input Configure
Product Link 121S/300
Commands
Product Link 121S/300
Service Letter-APD
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL INSTALLED PRODUCT LINK PL-102C AND REPLACING WITH PRODUCT LINK PL-121SR
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 320B, 320C 320D, 320E, 321C, 322B, 322C, 323D, 323E, 324E, AND 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
Testing and Adjusting
Electronic Control Module (ECM) - Flash Program
Product Link - PL522/523
Electronic Control Module (ECM) - Replace
Product Link - PL522/523
Specifications
Product Link - PL522/523
Electronic Control Module (ECM) - Flash Program
Product Link 121S/300
Electronic Control Module (ECM) - Replace
Product Link 121S/300
Specifications
Product Link 121S/300
Troubleshooting
General Information
Product Link - PL522/523
Diagnostic Capabilities
Product Link - PL522/523
Electronic Service Tool Does Not Communicate with ECM
Product Link - PL522/523
Reports and Messages Not Available
Product Link - PL522/523
Position Reports Not Available
Product Link - PL522/523
Reporting Interval Erratic
Product Link - PL522/523
Diagnostics and Events Not Available
Product Link - PL522/523
Operating Hours Discrepancy
Product Link - PL522/523
Diagnostic Code List
Product Link - PL522/523
MID 161 - CID 0254 - FMI 04
Product Link - PL522/523
MID 161 - CID 0254 - FMI 12
Product Link - PL522/523
MID 161 - CID 1250 - FMI 09
Product Link - PL522/523
MID 161 - CID 1888 - FMI 14
Product Link - PL522/523
MID 161 - CID 3766- FMI 14
Product Link - PL522/523
General Information
Product Link 121S/300
Diagnostic Capabilities
Product Link 121S/300
Electronic Service Tool Does Not Communicate with ECM
Product Link 121S/300
Position Reports Not Available
Product Link 121S/300
Reporting Interval Erratic
Product Link 121S/300
Diagnostics and Events Not Available
Product Link 121S/300
Operating Hours Discrepancy
Product Link 121S/300
Diagnostic Code List
Product Link 121S/300
MID 122 - CID 0254 - FMI 04
Product Link 121S/300
MID 122 - CID 0254 - FMI 12
Product Link 121S/300
MID 122 - CID 1250 - FMI 09
Product Link 121S/300
ECM Does Not Communicate with User Interface
Product Link 121S/300
Service Magazine
Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631}
2001/04/09
New Version of Product Link Available {7602}
2001/08/27
New Flash File Software Is Used for Product Link 151/201 {7606, 7620}
2002/07/15
New Flexible Antenna Whip Available for Product Link {7606}
2002/12/02
New Flash File Software Is Used for Product Link 151/201 {7620}
2003/03/10
New Software Is Used on Product Link 151/201 {7606, 7620}
2003/09/01
Product Link Cellular Is Now Available {7602}
2004/08/02
Correction to Special Instruction, REHS2143, "Product Link PL-102C System Installation" {7602}
2004/08/02
Correction to Special Instruction, &quot;Product Link PL102C System Installation&quot; and Systems Operation, Testing and Adjust, &quot;Product Link PL102C&quot; {7602}
2004/12/13
New PC Service Tool Software Released for Cellular Based Product Link {7620}
2004/12/20
Correction to Special Instruction, "Product Link PL102C System Installation" {7620}
2004/12/13
Procedure to Identify which COM PORT the USB Device Is Occupying and the Procedure to Change the Default COM PORT Setting {7606}
2005/01/10
New Product Link Software Available for PL151 and PL201 {7606}
2005/01/10
New Product Link Systems Are Now Available {7606}
2005/02/07
New Software Available for Product Link PL-151 and PL-201 {7620}
2005/05/02
New Product Link Software Is Now Available {7606, 7620}
2005/12/19
New Software Available for Product Link {7606, 7620}
2006/10/16
New Product Link Software Is Now Available {7606, 7620}
2007/05/14
New Product Link Hardware Is Now Available {7606}
2007/05/07
New Processes Improve Registration of Product Link {7338, 7606}
2008/04/14
New Software for Product Link is Now Available {7606, 7620}
2008/03/10
New Software for Product Link is Now Available {7606, 7620}
2008/05/19
New Software is Now Used for the Product Link PL121SR and PL321SR Systems {7606, 7620}
2009/10/15
New Product Link Cellular Is Released for All Cat Products {7606}
2011/02/08
New Software Is Now Released for Product Link PL522/523 Systems On All Cat Product {7606}
2011/05/12
A New Product Link Registration/Activation Process Now Available For Product Link (PL) 522 and 523 {7606}
2011/10/19
New Software for Product Link (PL300) Is Now Available {7606, 7620}
2011/10/11
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
New Software Is Now Available for Product Link (PL 121) {7602, 7610, 7620}
2011/12/15
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620}
2012/12/10
Improved Process for Activating Product Link PL522 On Assets In China {7606}
2012/11/19
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2015/07/14
New Software Is Now Available For Product Link 522 Systems On All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2013/04/22
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
Improved VisionLink<SUP>TM</SUP>Store is Now Available for all Caterpillar Products {7606}
2013/03/29
Device Transfers Are Now Supported In VisionLink<SUP>TM</SUP> Store {7606}
2013/03/29
Improved VisionLink<SUP>TM</SUP> Store for Minimizing Delay in Appearance of VisionLink Store - Modules is Now Available for All Caterpillar Products {7606}
2013/03/29
New Product Link Software for PL121 and PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7610, 7620}
2013/05/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link 522 System {7606}
2013/09/27
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2013/07/08
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
New Software Is Now Available For All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2013/08/19
Procedure for Improving Antenna Communication on All Machines Equipped With Product Link {733B, 7606}
2013/11/08
Improvements for Products and Systems Connected to Product Link {7606}
2013/10/02
New Product Link Software for PL300 Is Now Available for All Cat <SUP>&reg;</SUP>Products {7606, 7620}
2013/10/21
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2014/12/10
Improved Product Link Satellite System Special Instruction guide {7606}
2013/12/20
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606}
2014/08/08
Troubleshooting SIM Cards on Certain Product Link 522 and 523 for all Cat Products {7606}
2015/02/17
Loss of Daily Reports May Be an Indicator of End of Life for the Product Link<SUP>&reg;</SUP> ECM on PL321SR and PL321VSR Systems {7606}
2014/08/13
Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/22
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat<SUP>&reg;</SUP> Products with Cat<SUP>&reg;</SUP> Product Link 121/321 {7606}
2014/12/24
Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06
Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/06/26
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/09/11
Special Instruction
Generic Installation of the WAVS Cleaning System{7348}
Generic Installation of the WAVS Cleaning System{7348}
WAVS Installation Guide for Generic Applications{7347, 7348}
WAVS Installation Guide for Generic Applications{7347, 7348}
WAVS Generic Installation Guide for Certain Cat<SUP>&reg;</SUP> Products{7347, 7348}
WAVS Generic Installation Guide for Certain Cat® Products{7347, 7348}
WAVS Light Duty Installation Guide for Certain Cat<SUP>&reg;</SUP> Products{7347, 7348}
WAVS Light Duty Installation Guide for Certain Cat® Products{7347, 7348}
Technical Information Bulletin
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20

Truck sale:

Caterpillar 320 B L, Construction
36,500 
Caterpillar 320 B L, Construction
- Crawler Excavators
MICHIGAN CAT
Caterpillar 320BL, Construction
39,752 
Caterpillar 320BL, Construction
- Crawler Excavators
TOROMONT CAT
Canada
CATERPILLAR 320BL 1997
 
CATERPILLAR 320BL 1997
- TRACK EXCAVATORS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
CATERPILLAR 320BL 2000
 
CATERPILLAR 320BL 2000
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
CATERPILLAR 320BL 2000
 
CATERPILLAR 320BL 2000
- TRACK EXCAVATORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.