AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

350 EXCAVATORS WITH AUTOLUB SYSTEM 3ML00001-UP (MACHINE) IMPLEMENTS Caterpillar SIS



EXCAVATOR 350-A EXCAVATOR 3ML
 350 EXCAVATORS WITH AUTOLUB SYSTEM 3ML00001-UP (MACHINE) SEBC0595 350-A 3ML   (1992)

Parts group 350-A:

  For full view, you need register
IMPLEMENTS
LINES GP-GREASE
OPERATION
OPERATION
Operation
INSTALLATION
INSTALLATION
Installation
INSTALLATION
INSTALLATION
Installation
Mounting block locations on boom and stick for distribution
valves. Weld the 162-3253 blocks in the locations shown in
the illustration.
INSTALLATION
INSTALLATION
Installation
The autolube electrical connections are made at the main
relay panel located on the right front corner of the machine.
INSTALLATION
INSTALLATION
Installation
Autolube lines routing for 2 piece front.
150-5043 AUTOLUBE GROUP
1505043 AUTOLUBE GROUP
2 PIECE FRONT
AUTOLUBE GROUP
AUTOLUBE GROUP
AUTOLUBE GROUP
2 PIECE FRONT
AUTOLUBE SYSTEM
AUTOLUBE SYSTEM
3 PIECE FRONT
AUTOLUBE SYSTEM
AUTOLUBE SYSTEM
AUTOLUBE SYSTEM
3 PIECE FRONT
LINCOLN PARTS
LINCOLN PARTS
Lincoln Parts

Information:

(For parts list, see above)

Special Instruction
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Service Letter-NACD
Product Support Program For Rewelding The Cross Head Adapter Bore On Certain 345B, 345B II, 350 And 350 L Material Handlers
Product Support Program For Rewelding The Cross Head Adapter Bore On Certain 345B, 345B II, 350 And 350 L Material Handlers
Service Magazine
Procedure for the Repair of the Adapter Head {6700}
2001/01/29
Special Instruction
Reinforcing Reach and Mass Booms{6501}
Reinforcing Reach and Mass Booms{6501}
Replacing the Boom Nose Bracket Assembly{6501}
Replacing the Boom Nose Bracket Assembly{6501}
Service Letter-NACD
Product Support Program For Relocating The Boss On The Boom Foot Pin On Certain 350L Excavators
Product Support Program For Relocating The Boss On The Boom Foot Pin On Certain 350L Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Service Letter Cancellation
Service Letter Cancellation
The Reach Boom May Crack On Certain 350 And 350L Excavators
The Reach Boom May Crack On Certain 350 And 350L Excavators
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Reinforcement Side Plates Need To Be Added To The Boom Foot Area On Certain 350 Excavators With The 22 MM Side Plates
Reinforcement Side Plates Need To Be Added To The Boom Foot Area On Certain 350 Excavators With The 22 MM Side Plates
Service Letter-Australia
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Service Letter Cancellation
Service Letter Cancellation
The Reach Boom May Crack On Certain 350 And 350L Excavators
The Reach Boom May Crack On Certain 350 And 350L Excavators
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Reinforcement Side Plates Need To Be Added To The Boom Foot Area On Certain 350 Excavators With The 22 MM Side Plates
Reinforcement Side Plates Need To Be Added To The Boom Foot Area On Certain 350 Excavators With The 22 MM Side Plates
Service Letter-CFEL
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Service Letter Cancellation
Service Letter Cancellation
The Reach Boom May Crack On Certain 350 And 350L Excavators
The Reach Boom May Crack On Certain 350 And 350L Excavators
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Reinforcement Side Plates Need To Be Added To The Boom Foot Area On Certain 350 Excavators With The 22 MM Side Plates
Reinforcement Side Plates Need To Be Added To The Boom Foot Area On Certain 350 Excavators With The 22 MM Side Plates
Service Letter-CSARL
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Reinforcement Side Plates Need To Be Added To The Boom Foot Area On Certain 350 Excavators With The 22 MM Side Plates
Reinforcement Side Plates Need To Be Added To The Boom Foot Area On Certain 350 Excavators With The 22 MM Side Plates
Service Letter-Americas
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Service Letter Cancellation
Service Letter Cancellation
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Service Letter-Brazil
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Technical Information Bulletin
Loss Of Power In "BOOM UP" Operation
Loss Of Power In "BOOM UP" Operation
Complaints Of Hesitation In "BOOM UP" Function
Complaints Of Hesitation In "BOOM UP" Function
Specifications
Boom Groups
350 AND 350L EXCAVATORS ATTACHMENTS
Service Letter-China
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Service Letter Cancellation
Service Letter Cancellation
The Reach Boom May Crack On Certain 350 And 350L Excavators
The Reach Boom May Crack On Certain 350 And 350L Excavators
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Reinforcement Side Plates Need To Be Added To The Boom Foot Area On Certain 350 Excavators With The 22 MM Side Plates
Reinforcement Side Plates Need To Be Added To The Boom Foot Area On Certain 350 Excavators With The 22 MM Side Plates
Service Letter-Asia
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Service Letter Cancellation
Service Letter Cancellation
The Reach Boom May Crack On Certain 350 And 350L Excavators
The Reach Boom May Crack On Certain 350 And 350L Excavators
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Reinforcement Side Plates Need To Be Added To The Boom Foot Area On Certain 350 Excavators With The 22 MM Side Plates
Reinforcement Side Plates Need To Be Added To The Boom Foot Area On Certain 350 Excavators With The 22 MM Side Plates
Service Letter-APD
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Service Letter Cancellation
Service Letter Cancellation
The Reach Boom May Crack On Certain 350 And 350L Excavators
The Reach Boom May Crack On Certain 350 And 350L Excavators
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Upper Frame Needs To Be Weld Repaired And/Or Reinforced At The Spreader Plate And At The Frame Rail Doubler Plate In The Boom Tower Area Of Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
The Hydraulic Hoses Need To Be Replaced And Plate Assemblies Need To Be Installed At The Main Valve And Boom Foot To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Reinforcement Side Plates Need To Be Added To The Boom Foot Area On Certain 350 Excavators With The 22 MM Side Plates
Reinforcement Side Plates Need To Be Added To The Boom Foot Area On Certain 350 Excavators With The 22 MM Side Plates
Disassembly and Assembly
Boom
350 AND 350 L EXCAVATOR MACHINE SYSTEMS
Service Magazine
Install Boom Foot Bearings Correctly For Optimum Service Life{6501}
1994/10/31
New Bearings Are Used In The Boom Foot Bores{6501,6511}
1995/09/18
New Control Valve Groups Improve Modulation For Boom, Bucket, And Stick{5051,5122,5461,5464}
1997/07/28
New Pin In The Boom Group Increases Reliability And Durability{6501,6511}
1998/03/09
Use Bearing Puller Adapters For Removing Various Size Bearings{6500,6501,6502,6505,6509,6516}
1998/03/09
Special Instructions Now Available For Reinforcing Boom And Stick Assemblies {6500,6501,6502}
1998/09/28
A Special Instruction For Replacing Boom Nose Bracket Assemblies Is Now Available {6501}
1999/03/08
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Disassembly and Assembly
Bucket Linkage
350 AND 350 L EXCAVATOR MACHINE SYSTEMS
Specifications
Bucket Linkage Groups
350 AND 350L EXCAVATORS ATTACHMENTS
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Disassembly and Assembly
Bucket Linkage
350 AND 350 L EXCAVATOR MACHINE SYSTEMS
Service Letter-NACD
Inspect The Boom Lowering Check Valve On Certain 350, 350L, 375 And 375L Excavators
Inspect The Boom Lowering Check Valve On Certain 350, 350L, 375 And 375L Excavators
Service Letter-CSARL
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
System Operation and Testing And Adjusting Procedure Available For Heavy Lift Attachment{5057}
1994/05/16
Use Bearing Puller Adapters For Removing Various Size Bearings{6500,6501,6502,6505,6509,6516}
1998/03/09
Service Letter-NACD
Product Support Program For Replacing Bucket Cylinder Pins That May Break On Certain 350 Excavators
Product Support Program For Replacing Bucket Cylinder Pins That May Break On Certain 350 Excavators
Service Letter-Australia
Service Letter-CFEL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Letter-APD
Product Support Program For Replacing Bucket Cylinder Pins That May Break On Certain 350 Excavators
Product Support Program For Replacing Bucket Cylinder Pins That May Break On Certain 350 Excavators
Service Magazine
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Improved Ground Engaging Tool (GET) Pin And Retainer Assembly Are Available{6805}
1998/04/20
Specifications
Sidecutter Groups
350 AND 350L EXCAVATORS ATTACHMENTS
Special Instruction
Reinforcing Reach and General Purpose Stick Assemblies{6502}
Reinforcing Reach and General Purpose Stick Assemblies{6502}
Stick Reinforcement of Bottom Plate{6502}
Stick Reinforcement of Bottom Plate{6502}
Replacing the Center Boss Assembly on a Stick{6502}
Replacing the Center Boss Assembly on a Stick{6502}
Service Letter-NACD
Product Support Program For Replacing Stick Cylinder Pins That May Break On Certain 350/350L Excavators
Product Support Program For Replacing Stick Cylinder Pins That May Break On Certain 350/350L Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Inspect And Repair The Internal Baffle Welds On Certain 350 Excavators Equipped With A 4I6635 (M2.95) Or 4I6634 (R3.1) Stick Assembly
Inspect And Repair The Internal Baffle Welds On Certain 350 Excavators Equipped With A 4I6635 (M2.95) Or 4I6634 (R3.1) Stick Assembly
Replace The Hydraulic Hoses And Install A Plate Assembly At The Main Valve To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Replace The Hydraulic Hoses And Install A Plate Assembly At The Main Valve To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Product Support Program For Reworking The Stick Nose To Enable The Greasing Of The Bearings On Certain 350 Excavators
Product Support Program For Reworking The Stick Nose To Enable The Greasing Of The Bearings On Certain 350 Excavators
Service Letter-Australia
Product Support Program For Replacing Stick Cylinder Pins That May Break On Certain 350/350L Excavators
Product Support Program For Replacing Stick Cylinder Pins That May Break On Certain 350/350L Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Inspect And Repair The Internal Baffle Welds On Certain 350 Excavators Equipped With A 4I6635 (M2.95) Or 4I6634 (R3.1) Stick Assembly
Inspect And Repair The Internal Baffle Welds On Certain 350 Excavators Equipped With A 4I6635 (M2.95) Or 4I6634 (R3.1) Stick Assembly
Replace The Hydraulic Hoses And Install A Plate Assembly At The Main Valve To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Replace The Hydraulic Hoses And Install A Plate Assembly At The Main Valve To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Product Support Program For Reworking The Stick Nose To Enable The Greasing Of The Bearings On Certain 350 Excavators
Product Support Program For Reworking The Stick Nose To Enable The Greasing Of The Bearings On Certain 350 Excavators
Service Letter-CFEL
Product Support Program For Replacing Stick Cylinder Pins That May Break On Certain 350/350L Excavators
Product Support Program For Replacing Stick Cylinder Pins That May Break On Certain 350/350L Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Inspect And Repair The Internal Baffle Welds On Certain 350 Excavators Equipped With A 4I6635 (M2.95) Or 4I6634 (R3.1) Stick Assembly
Inspect And Repair The Internal Baffle Welds On Certain 350 Excavators Equipped With A 4I6635 (M2.95) Or 4I6634 (R3.1) Stick Assembly
Replace The Hydraulic Hoses And Install A Plate Assembly At The Main Valve To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Replace The Hydraulic Hoses And Install A Plate Assembly At The Main Valve To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Product Support Program For Reworking The Stick Nose To Enable The Greasing Of The Bearings On Certain 350 Excavators
Product Support Program For Reworking The Stick Nose To Enable The Greasing Of The Bearings On Certain 350 Excavators
Service Letter-Americas
Product Support Program For Replacing Stick Cylinder Pins That May Break On Certain 350/350L Excavators
Product Support Program For Replacing Stick Cylinder Pins That May Break On Certain 350/350L Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Inspect And Repair The Internal Baffle Welds On Certain 350 Excavators Equipped With A 4I6635 (M2.95) Or 4I6634 (R3.1) Stick Assembly
Inspect And Repair The Internal Baffle Welds On Certain 350 Excavators Equipped With A 4I6635 (M2.95) Or 4I6634 (R3.1) Stick Assembly
Replace The Hydraulic Hoses And Install A Plate Assembly At The Main Valve To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Replace The Hydraulic Hoses And Install A Plate Assembly At The Main Valve To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Product Support Program For Reworking The Stick Nose To Enable The Greasing Of The Bearings On Certain 350 Excavators
Product Support Program For Reworking The Stick Nose To Enable The Greasing Of The Bearings On Certain 350 Excavators
Specifications
Stick Groups
350 AND 350L EXCAVATORS ATTACHMENTS
Service Letter-China
Product Support Program For Replacing Stick Cylinder Pins That May Break On Certain 350/350L Excavators
Product Support Program For Replacing Stick Cylinder Pins That May Break On Certain 350/350L Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Inspect And Repair The Internal Baffle Welds On Certain 350 Excavators Equipped With A 4I6635 (M2.95) Or 4I6634 (R3.1) Stick Assembly
Inspect And Repair The Internal Baffle Welds On Certain 350 Excavators Equipped With A 4I6635 (M2.95) Or 4I6634 (R3.1) Stick Assembly
Replace The Hydraulic Hoses And Install A Plate Assembly At The Main Valve To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Replace The Hydraulic Hoses And Install A Plate Assembly At The Main Valve To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Product Support Program For Reworking The Stick Nose To Enable The Greasing Of The Bearings On Certain 350 Excavators
Product Support Program For Reworking The Stick Nose To Enable The Greasing Of The Bearings On Certain 350 Excavators
Service Letter-Asia
Product Support Program For Replacing Stick Cylinder Pins That May Break On Certain 350/350L Excavators
Product Support Program For Replacing Stick Cylinder Pins That May Break On Certain 350/350L Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Inspect And Repair The Internal Baffle Welds On Certain 350 Excavators Equipped With A 4I6635 (M2.95) Or 4I6634 (R3.1) Stick Assembly
Inspect And Repair The Internal Baffle Welds On Certain 350 Excavators Equipped With A 4I6635 (M2.95) Or 4I6634 (R3.1) Stick Assembly
Replace The Hydraulic Hoses And Install A Plate Assembly At The Main Valve To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Replace The Hydraulic Hoses And Install A Plate Assembly At The Main Valve To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Product Support Program For Reworking The Stick Nose To Enable The Greasing Of The Bearings On Certain 350 Excavators
Product Support Program For Reworking The Stick Nose To Enable The Greasing Of The Bearings On Certain 350 Excavators
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Letter-APD
Product Support Program For Replacing Stick Cylinder Pins That May Break On Certain 350/350L Excavators
Product Support Program For Replacing Stick Cylinder Pins That May Break On Certain 350/350L Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Product Support Program For The Boom To Stick Pin May Crack On Certain 350 Excavators
Inspect And Repair The Internal Baffle Welds On Certain 350 Excavators Equipped With A 4I6635 (M2.95) Or 4I6634 (R3.1) Stick Assembly
Inspect And Repair The Internal Baffle Welds On Certain 350 Excavators Equipped With A 4I6635 (M2.95) Or 4I6634 (R3.1) Stick Assembly
Replace The Hydraulic Hoses And Install A Plate Assembly At The Main Valve To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Replace The Hydraulic Hoses And Install A Plate Assembly At The Main Valve To Cover The Hydraulic Hose Stems On Certain 350 And 350L Excavators
Product Support Program For Reworking The Stick Nose To Enable The Greasing Of The Bearings On Certain 350 Excavators
Product Support Program For Reworking The Stick Nose To Enable The Greasing Of The Bearings On Certain 350 Excavators
Disassembly and Assembly
Stick
350 AND 350 L EXCAVATOR MACHINE SYSTEMS
Service Magazine
Install Bearings In Stick Correctly For Optimum Service Life {6502}
1995/10/09
New Control Valve Groups Improve Modulation For Boom, Bucket, And Stick{5051,5122,5461,5464}
1997/07/28
Bosses in Various Stick Assemblies Are Improved {6502}
1998/02/02
Use Bearing Puller Adapters For Removing Various Size Bearings{6500,6501,6502,6505,6509,6516}
1998/03/09
Special Instructions Now Available For Reinforcing Boom And Stick Assemblies {6500,6501,6502}
1998/09/28
A Special Instruction Is Now Available For Replacing The Center Boss Assembly On A Stick {6500,6502}
1998/10/05
A Special Instruction Is Now Available For Reinforcing Bottom Plates Of Stick Assemblies {6502}
1998/11/30
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.