AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

EXCAVATOR 312 B VAB /ADDITIONAL INFORMATI/ 2KW00001-UP (MACHINE) HYDRAULIC SYSTEM Caterpillar SIS



EXCAVATOR 312B L EXCAVATOR 2KW
 EXCAVATOR 312 B VAB /ADDITIONAL INFORMATI/ 2KW00001-UP (MACHINE) SEBC0650 312B L 2KW   (1997)

Parts group 312B L:

  For full view, you need register
HYDRAULIC SYSTEM
CYLINDER GP
142-0176 CYLINDER
1420176 CYLINDER GP LINE
PIN 6SW1-UP
PART OF 1469255
AN ATTACHMENT
143-8161 CYLINDER
1438161 CYLINDER GP SEAL
PIN 6SW1-UP
PART OF 1420716 AND 1420177
AN ATTACHMENT
CYLINDER
185-9086 CYLINDER
1859086 CYLINDER GP
PIN 6SW1-UP
PART OF 1420176 AND 1438161
AN ATTACHMENT
142-0177 CYLINDER
1420177 CYLINDER GP LINE
PIN 6SW1-UP
PART OF 1469255
AN ATTACHMENT
152-6971 CYLINDER
1526971 CYLINDER GP LINE
PIN 6SW1-UP
PART OF 1469255
AN ATTACHMENT
CYLINDER
143-8162 CYLINDER
1438162 CYLINDER GP SEAL
PIN 6SW1-UP
PART OF 1526971
AN ATTACHMENT
192-3661 CYLINDER
1923661 CYLINDER GP LINE
PIN 6SW1-UP
PART OF 1469255
AN ATTACHMENT
CYLINDER
184-7660 CYLINDER
1847660 CYLINDER GP
PIN 6SW1-UP
PART OF 1923661
AN ATTACHMENT
HYDRAULIC GP
176-0174 HYDRAULICS
1760174 HYDRAULICS VERSATILITY
PIN 6SW1-UP
PART OF 312B VAB
AN ATTACHMENT
176-0175 HYDRAULICS
1760175 HYDRAULICS VERSATILITY
PIN 6SW1-UP
PART OF 312B VAB
AN ATTACHMENT
LINES GP-FRONT
148-3400 CHECK VALVE STICK
1483400 CHECK VALVE STICK
PIN 6SW1-UP
PART OF 312B VAB
AN ATTACHMENT
LINES GP-HYDRAULIC
LINES
142-0180 LINES
1420180 LINES GP BOOM
PIN 6SW1-UP
PART OF 1420176
AN ATTACHMENT
LINES
142-0181 LINES
1420181 LINES GP BOOM
PIN 6SW1-UP
PART OF 1420177
AN ATTACHMENT
LINES
139-6021 LINES
1396021 LINES GP FRONT
PIN 6SW1-UP
PART OF 1454780
AN ATTACHMENT
LINES
146-9258 LINES
1469258 LINES GP FRONT
PIN 6SW1-UP
PART OF 1454780
AN ATTACHMENT
LINES
147-2422 LINES
1472422 LINES GP VAB
PIN 6SW1-UP
PART OF 1469255
AN ATTACHMENT
LINES
152-6972 LINES
1526972 LINES GP
PIN 6SW1-UP
PART OF 1526971
AN ATTACHMENT
LINES
192-3663 LINES
1923663 LINES GP CYLINDER
PIN 6SW1-UP
PART OF 1923661
AN ATTACHMENT
LINES
148-3401 LINES
1483401 LINES GP
PIN 6SW1-UP
PART OF 1483400
AN ATTACHMENT
LINES
148-3402 LINES
1483402 LINES GP FRONT
PIN 6SW1-UP
PART OF 1483400
AN ATTACHMENT
LINES
152-7367 LINES
1527367 LINES GP
PIN 6SW1-UP
PART OF 1483400
AN ATTACHMENT
LINES
146-9664 LINES
1469664 LINES GP FRONT
PIN 6SW1-UP
PART OF 1469669
AN ATTACHMENT
LINES
149-0413 LINES
1490413 LINES AR
PIN 6SW1-UP
PART OF 312B VAB, 1760174 AND 1760175
AN ATTACHMENT
LINES
173-7600 LINES
1737600 LINES AUX. VAB
PIN 6SW1-UP
PART OF 312B VAB AND , 1760174 AND 1760175
AN ATTACHMENT
LINES
142-9597 LINES
1429597 LINES GP PILOT
PIN 6SW1-UP
PART OF 1740977
AN ATTACHMENT
LINES
142-9598 LINES
1429598 LINES GP PILOT
PIN 6SW1-UP
PART OF 1740977
AN ATTACHMENT
174-4853 LINES
1744853 LINES GP PILOT
PIN 6SW1-UP
PART OF 1740977
AN ATTACHMENT
LINES
174-1449 LINES
1741449 LINES GP PILOT
PIN 6SW1-UP
PART OF 1744853
AN ATTACHMENT
LINES
190-5277 LINES
1905277 LINES GP FRONT
PIN 6SW1-UP
PART OF 1740977
AN ATTACHMENT
LINES
145-5101 LINES
1455101 LINES GP PUMP
PIN 6SW1-UP
PART OF 1469668
AN ATTACHMENT
LINES
146-9662 LINES
1469662 LINES GP FRONT
PIN 6SW1-UP
PART OF 1469668
AN ATTACHMENT
LINES
149-0414 LINES
1490414 LINES QUICK COUPLER VAB
PIN 6SW1-UP
PART OF 312B VAB
AN ATTACHMENT
LINES GP-PILOT
LINE
165-4384 LINE
1654384 LINE GP PILOT
PIN 6SW1-UP
PART OF 1469255
AN ATTACHMENT
LINES GP-ROTATOR
142-0176 CYLINDER
1420176 CYLINDER GP LINE
PIN 6SW1-UP
PART OF 1469255
AN ATTACHMENT
143-8161 CYLINDER
1438161 CYLINDER GP SEAL
PIN 6SW1-UP
PART OF 1420716 AND 1420177
AN ATTACHMENT
CYLINDER
185-9086 CYLINDER
1859086 CYLINDER GP
PIN 6SW1-UP
PART OF 1420176 AND 1438161
AN ATTACHMENT
142-0177 CYLINDER
1420177 CYLINDER GP LINE
PIN 6SW1-UP
PART OF 1469255
AN ATTACHMENT
152-6971 CYLINDER
1526971 CYLINDER GP LINE
PIN 6SW1-UP
PART OF 1469255
AN ATTACHMENT
CYLINDER
143-8162 CYLINDER
1438162 CYLINDER GP SEAL
PIN 6SW1-UP
PART OF 1526971
AN ATTACHMENT
192-3661 CYLINDER
1923661 CYLINDER GP LINE
PIN 6SW1-UP
PART OF 1469255
AN ATTACHMENT
CYLINDER
184-7660 CYLINDER
1847660 CYLINDER GP
PIN 6SW1-UP
PART OF 1923661
AN ATTACHMENT
PUMP GP
PUMP
145-5102 PUMP
1455102 PUMP GP MTG.
PIN 6SW1-UP
PART OF 1469668
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Service Letter-NACD
The Bond Between The Steel And The Rubber On The 3Q7749 Seal May Allow Gas To Leak
The Bond Between The Steel And The Rubber On The 3Q7749 Seal May Allow Gas To Leak
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Service Letter-China
The Bond Between The Steel And The Rubber On The 3Q7749 Seal May Allow Gas To Leak
The Bond Between The Steel And The Rubber On The 3Q7749 Seal May Allow Gas To Leak
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Accumulator (Hydraulic Pilot) - Remove and Install
312B Excavator Machine Systems
Service Magazine
Procedure for Testing and Charging the Pilot System Accumulators {5077}
2003/05/05
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Disassembly and Assembly
Radiator and Hydraulic Oil Cooler - Remove
3054 Engine Supplement for 312B and 312B L Excavators
Radiator and Hydraulic Oil Cooler - Install
3054 Engine Supplement for 312B and 312B L Excavators
Service Magazine
Caterpillar Introduces New Long Life Heavy Duty Engine Coolant{1395}
1994/09/19
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Disassembly and Assembly
Main Hydraulic Pump and Pump Drive Coupling - Remove
312B Excavator Machine Systems
Main Hydraulic Pump and Pump Drive Coupling - Install
312B Excavator Machine Systems
Service Magazine
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Boom Cylinder
312B and 312B L Excavator Attachment Specifications
Stick Cylinder
312B and 312B L Excavator Attachment Specifications
Bucket Cylinder
312B and 312B L Excavator Attachment Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Cylinder - Remove
312B Excavator Machine Systems
Bucket Cylinder - Disassemble
312B Excavator Machine Systems
Bucket Cylinder - Assemble
312B Excavator Machine Systems
Bucket Cylinder - Install
312B Excavator Machine Systems
Stick Cylinder - Remove
312B Excavator Machine Systems
Stick Cylinder - Disassemble
312B Excavator Machine Systems
Stick Cylinder - Assemble
312B Excavator Machine Systems
Stick Cylinder - Install
312B Excavator Machine Systems
Boom Cylinder - Remove
312B Excavator Machine Systems
Boom Cylinder - Install
312B Excavator Machine Systems
Boom Cylinder - Disassemble
312B Excavator Machine Systems
Boom Cylinder - Assemble
312B Excavator Machine Systems
Service Magazine
New Seals in the Boom, the Stick, and the Bucket Cylinder Groups Increase Reliability {5456, 5457, 5458, 7555, 7562}
2001/01/08
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2002/07/01
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Procedure for the Removal of Air From Hydraulic Cylinders {7562}
2003/01/06
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Disassembly and Assembly
Swing Drive - Disassemble
312B Excavator Machine Systems
Swing Drive - Remove
312B Excavator Machine Systems
Swing Drive - Assemble
312B Excavator Machine Systems
Main Hydraulic Pump and Pump Drive Coupling - Remove
312B Excavator Machine Systems
Main Hydraulic Pump and Pump Drive Coupling - Install
312B Excavator Machine Systems
Service Magazine
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
The Hydraulic Pilot Oil Filter Is Improved {5059, 5092, 5479}
2000/08/14
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
An Improved Oil Filter Group for the Case Drain Filter Is Available {5056, 5068, 5091}
2007/04/02
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Improved Design for the Quick Connector is now used {5057}
2004/04/05
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Special Instruction
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
New Swing Control Valve In The Main Hydraulic Control Valve Provides Improved Swing Modulation {5051,5480}
1999/02/15
New Protective Caps For Hose Clamps Are Now Available {5057}
2001/11/19
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Specifications
Auxiliary Hydraulic Lines - Single Action
312B and 312B L Excavator Attachment Specifications
Auxiliary Hydraulic Lines - Common Piping
312B and 312B L Excavator Attachment Specifications
Auxiliary Hydraulic Lines - Short Stick
312B and 312B L Excavator Attachment Specifications
Auxiliary Hydraulic Lines - Medium Stick
312B and 312B L Excavator Attachment Specifications
Auxiliary Hydraulic Lines - Long Boom
312B and 312B L Excavator Attachment Specifications
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Specifications
Boom Cylinder Lines - Right Hand
312B and 312B L Excavator Attachment Specifications
Boom Cylinder Lines - Left Hand
312B and 312B L Excavator Attachment Specifications
Boom Cylinder Lines - Right Hand
312B and 312B L Excavator Attachment Specifications
Boom Cylinder Lines - Left Hand
312B and 312B L Excavator Attachment Specifications
Boom Lines
312B and 312B L Excavator Attachment Specifications
Boom Lines - Medium Pressure
312B and 312B L Excavator Attachment Specifications
Bucket Cylinder Lines
312B and 312B L Excavator Attachment Specifications
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
The Center-Lock Hydraulic Pin Grabber Quick Couplers Have Specific Hydraulic Requirements {6129}
2010/04/15
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Specifications
Front Hydraulic Lines - Two Pump Flow
312B and 312B L Excavator Attachment Specifications
Front Hydraulic Lines
312B and 312B L Excavator Attachment Specifications
Front Hydraulic Lines - Single Action
312B and 312B L Excavator Attachment Specifications
Front Hydraulic Lines - Common Piping
312B and 312B L Excavator Attachment Specifications
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
New Swing Control Valve In The Main Hydraulic Control Valve Provides Improved Swing Modulation {5051,5480}
1999/02/15
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Pilot Hydraulic Lines - Two Pump Flow
312B and 312B L Excavator Attachment Specifications
Pilot Hydraulic Lines - Single Action and One Pump Circuit
312B and 312B L Excavator Attachment Specifications
Pilot Hydraulic Lines - Common Piping and Two Pump Circuit
312B and 312B L Excavator Attachment Specifications
Pilot Hydraulic Lines - Boom Lowering Control Device
312B and 312B L Excavator Attachment Specifications
Pilot Hydraulic Lines - Quick Coupler
312B and 312B L Excavator Attachment Specifications
Pilot Hydraulic Lines - Common Piping and Two Pump Circuit
312B and 312B L Excavator Attachment Specifications
Pilot Hydraulic Lines - Quick Coupler
312B and 312B L Excavator Attachment Specifications
Service Magazine
A New Pressure Switch Improves the Reliability of the Automatic Engine Speed Control {5057, 5059}
2008/07/14
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MEDIUM PRESSURE LINE RETURN CIRCUIT ON CERTAIN 312B AND 315B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MEDIUM PRESSURE LINE RETURN CIRCUIT ON CERTAIN 312B AND 315B EXCAVATORS
Service Magazine
The Hydraulic Hoses in the Return Lines Group Are Improved {5057}
2004/04/12
Specifications
Stick Cylinder Lines - Short Stick Control Valve
312B and 312B L Excavator Attachment Specifications
Stick Cylinder Lines
312B and 312B L Excavator Attachment Specifications
Stick Lines - Short
312B and 312B L Excavator Attachment Specifications
Stick Lines - Medium
312B and 312B L Excavator Attachment Specifications
Stick Lines - Long
312B and 312B L Excavator Attachment Specifications
Stick Lines
312B and 312B L Excavator Attachment Specifications
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SWIVEL JOINT LOCKING ROD ON CERTAIN 312B, 315B, 317B L, 317B LN, 318B L AND 318B L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SWIVEL JOINT LOCKING ROD ON CERTAIN 312B, 315B, 317B L, 317B LN, 318B L AND 318B L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWIVEL JOINT LOCKING ROD ON CERTAIN 312B, 312C, 315B, 317B L, 317B LN, 318B L AND 318B LN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWIVEL JOINT LOCKING ROD ON CERTAIN 312B, 312C, 315B, 317B L, 317B LN, 318B L AND 318B LN EXCAVATORS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SWIVEL JOINT LOCKING ROD ON CERTAIN 312B, 315B, 317B L, 317B LN, 318B L AND 318B L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SWIVEL JOINT LOCKING ROD ON CERTAIN 312B, 315B, 317B L, 317B LN, 318B L AND 318B L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWIVEL JOINT LOCKING ROD ON CERTAIN 312B, 312C, 315B, 317B L, 317B LN, 318B L AND 318B LN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWIVEL JOINT LOCKING ROD ON CERTAIN 312B, 312C, 315B, 317B L, 317B LN, 318B L AND 318B LN EXCAVATORS
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Service Magazine
Use Spanner Wrench To Remove And Install Ring Nuts From Travel Drives {4350,4351}
1998/03/30
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR ELIMINATING PLUG LEAKS FROM TRAVEL MOTOR ON CERTAIN 312B, 312C, 315B, 317B AND 318B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR ELIMINATING PLUG LEAKS FROM TRAVEL MOTOR ON CERTAIN 312B, 312C, 315B, 317B AND 318B EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR ELIMINATING PLUG LEAKS FROM TRAVEL MOTOR ON CERTAIN 312B, 312C, 315B, 317B AND 318B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR ELIMINATING PLUG LEAKS FROM TRAVEL MOTOR ON CERTAIN 312B, 312C, 315B, 317B AND 318B EXCAVATORS
Service Letter-Asia
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR ELIMINATING PLUG LEAKS FROM TRAVEL MOTOR ON CERTAIN 312B, 312C, 315B, 317B AND 318B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR ELIMINATING PLUG LEAKS FROM TRAVEL MOTOR ON CERTAIN 312B, 312C, 315B, 317B AND 318B EXCAVATORS
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Swing Motor - Install
312B Excavator Machine Systems
Swing Motor - Disassemble
312B Excavator Machine Systems
Swing Motor - Assemble
312B Excavator Machine Systems
Travel Motor - Disassemble
312B Excavator Machine Systems
Travel Motor - Assemble
312B Excavator Machine Systems
Travel Motor - Remove
312B Excavator Machine Systems
Travel Motor - Install
312B Excavator Machine Systems
Swing Motor - Remove
312B Excavator Machine Systems
Service Magazine
Use Spanner Wrench To Remove And Install Ring Nuts From Travel Drives {4350,4351}
1998/03/30
New Final Drive And Travel Motor Service Tools {4050,4351,0733,0727}
1999/03/08
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-CSARL
The Drive Gear Of Medium Pressure 1478500 Pump Needs To Be Inspected And Replaced On Certain 312b And 315b Excavators
The Drive Gear Of Medium Pressure 1478500 Pump Needs To Be Inspected And Replaced On Certain 312b And 315b Excavators
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MEDIUM PRESSURE LINE RETURN CIRCUIT ON CERTAIN 312B AND 315B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MEDIUM PRESSURE LINE RETURN CIRCUIT ON CERTAIN 312B AND 315B EXCAVATORS
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Piston Pump (Main) - Purge
312B Excavator Attachments
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Gear Pump (Pilot) - Remove and Install
312B Excavator Machine Systems
Engine and Piston Pump - Remove
3054 Engine Supplement for 312B and 312B L Excavators
Engine and Piston Pump - Install
3054 Engine Supplement for 312B and 312B L Excavators
Main Hydraulic Pump and Pump Drive Coupling - Remove
312B Excavator Machine Systems
Main Hydraulic Pump and Pump Drive Coupling - Install
312B Excavator Machine Systems
Main Hydraulic Pump - Disassemble
312B Excavator Machine Systems
Main Hydraulic Pump - Assemble
312B Excavator Machine Systems
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/08/19
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWIVEL JOINT LOCKING ROD ON CERTAIN 312B, 312C, 315B, 317B L, 317B LN, 318B L AND 318B LN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWIVEL JOINT LOCKING ROD ON CERTAIN 312B, 312C, 315B, 317B L, 317B LN, 318B L AND 318B LN EXCAVATORS
Service Letter-CSARL
Disassembly and Assembly
Swivel - Disassemble
312B Excavator Machine Systems
Swivel - Assemble
312B Excavator Machine Systems
Swivel - Remove
312B Excavator Machine Systems
Swivel - Install
312B Excavator Machine Systems
Technical Information Bulletin
Check For Correct Operation Of Oil Level Switch
Check For Correct Operation Of Oil Level Switch
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Disassembly and Assembly
Hydraulic Oil Tank - Remove
312B Excavator Machine Systems
Hydraulic Oil Tank - Install
312B Excavator Machine Systems
Service Magazine
Change to the Procedure for the Release of System Hydraulic Pressure {5056, 5095}
2000/03/13
The Oil Level Switch for the Engine Oil and for the Hydraulic Oil Is Improved {1302, 5056, 7422}
2011/08/03
Improved Sight Gauges for the Hydraulic Tank and for the Fuel Tank Have Increased Durability {1273, 5056, 7479}
2003/12/08
Cap Assemblies Eliminate Need to Drain Hydraulic Tank During System Service {0738}
2004/03/08
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
An Improved Oil Filter Group for the Case Drain Filter Is Available {5056, 5068, 5091}
2007/04/02
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Use 136-7205 Extension Cable For Monitors{0740,0779}
1998/03/09
Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08
Cap Assemblies Eliminate Need to Drain Hydraulic Tank During System Service {0738}
2004/03/08
New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
New Swing Control Valve In The Main Hydraulic Control Valve Provides Improved Swing Modulation {5051,5480}
1999/02/15
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID VALVE ON CERTAIN 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B AND 345B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID VALVE ON CERTAIN 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B AND 345B EXCAVATORS
Service Letter-CSARL
Service Letter-Americas
Service Magazine
New Swing Control Valve In The Main Hydraulic Control Valve Provides Improved Swing Modulation {5051,5480}
1999/02/15
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Disassembly and Assembly
Travel Brake Valve-Remove
312B Excavator Machine Systems
Travel Brake Valve - Install
312B Excavator Machine Systems
Travel Brake Valve - Disassemble
312B Excavator Machine Systems
Travel Brake Valve - Assemble
312B Excavator Machine Systems
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW FLANGE FOR THE 140-0663 CHECK VALVE IN THE RETURN CIRCUIT OF CERTAIN 312B, 315B, 317BL, AND 317B LN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW FLANGE FOR THE 140-0663 CHECK VALVE IN THE RETURN CIRCUIT OF CERTAIN 312B, 315B, 317BL, AND 317B LN EXCAVATORS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MEDIUM PRESSURE LINE RETURN CIRCUIT ON CERTAIN 312B AND 315B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MEDIUM PRESSURE LINE RETURN CIRCUIT ON CERTAIN 312B AND 315B EXCAVATORS
Operation and Maintenance Manual
VA Boom Controls
307B, 312B, 315B, 317B and 318B Excavators
Specifications
Hydraulic Control (Auxiliary Pedal)
312B and 312B L Excavator Attachment Specifications
Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Disassembly and Assembly
Main Control Valve - Remove
312B Excavator Machine Systems
Main Control Valve - Install
312B Excavator Machine Systems
Main Control Valve - Disassemble
312B Excavator Machine Systems
Main Control Valve - Assemble
312B Excavator Machine Systems
Service Magazine
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/04/20
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/12/28
New Swing Control Valve In The Main Hydraulic Control Valve Provides Improved Swing Modulation {5051,5480}
1999/02/15
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/04/20
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/12/28
Service Letter-CSARL
THE SPOOL COUPLING CAN BREAK AND NEEDS TO BE REPLACED ON CERTAIN 312B AND 312B L EXCAVATORS
THE SPOOL COUPLING CAN BREAK AND NEEDS TO BE REPLACED ON CERTAIN 312B AND 312B L EXCAVATORS
Systems Operation
Lowering Control Valve (Boom)
312B Excavator Attachments
Testing and Adjusting
Lowering Control Valve (Boom) - Test
312B Excavator Attachments
Lowering Control Valve (Stick) - Test
312B Excavator Attachments
Disassembly and Assembly
Boom Lowering Control Valve - Remove
312B Excavator Machine Systems
Boom Lowering Control Valve - Install
312B Excavator Machine Systems
Boom Lowering Control Valve - Disassemble
312B Excavator Machine Systems
Boom Lowering Control Valve - Assemble
312B Excavator Machine Systems
Solenoid Valve (Proportional Reducing) - Remove and Install
312B Excavator Machine Systems
Solenoid Valve (Swing Priority) - Remove and Install
312B Excavator Machine Systems
Solenoid Valve (Travel Speed) - Remove and Install
312B Excavator Machine Systems
Solenoid Valve (Two Speed Travel) - Remove and Install
312B Excavator Machine Systems
Relief Valve (Pilot) - Remove and Install
312B Excavator Machine Systems
Service Magazine
An Improved Ball Valve Gp Is Now Used {1329}
2004/07/05
A New Manual Valve Group for the Auxiliary Hydraulic Lines is Available for Certain Excavators {1329, 5001, 5130}
2009/06/15
The Work Tool Ball Valve Can Seize on Certain Wheeled and Medium Hydraulic Excavators {1329, 5001, 5130}
2011/11/29
Service Letter-CSARL
A Spacer Needs To Be Added To The Joystick Control Valves On Certain 312B Excavators
A Spacer Needs To Be Added To The Joystick Control Valves On Certain 312B Excavators
Disassembly and Assembly
Pilot Valve (Joystick) - Remove
312B Excavator Machine Systems
Pilot Valve (Joystick) - Install
312B Excavator Machine Systems
Pilot Valve (Joystick) - Disassemble
312B Excavator Machine Systems
Pilot Valve (Joystick) - Assemble
312B Excavator Machine Systems
Service Magazine
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/04/20
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/12/28
The Hydraulic Pilot Oil Filter Is Improved {5059, 5092, 5479}
2000/08/14
Optional Spool Kits are Available for the Pilot Valve to Modify the Response of the Implement Controls {5059}
2000/08/14
A New Pressure Switch Improves the Reliability of the Automatic Engine Speed Control {5057, 5059}
2008/07/14
Tool Operating Manual
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Testing and Adjusting
Relief Valve (One Way Flow Line) - Test and Adjust
312B Excavator Attachments
Disassembly and Assembly
Relief Valve (Pilot) - Remove and Install
312B Excavator Machine Systems
Service Magazine
The 229-3612 Valve Seat Tool Gp Is Available to Repair Line Relief Valve Seats {0738, 5117}
2012/01/19
Disassembly and Assembly
Selector Valve (Hydraulic Activation) - Remove
312B Excavator Machine Systems
Selector Valve (Hydraulic Activation) - Install
312B Excavator Machine Systems
Selector Valve (Hydraulic Activation) - Disassemble
312B Excavator Machine Systems
Selector Valve (Hydraulic Activation) - Assemble
312B Excavator Machine Systems
Service Magazine
New Swing Control Valve In The Main Hydraulic Control Valve Provides Improved Swing Modulation {5051,5480}
1999/02/15
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/04/20
Optional Valve Spool Kits Are Available For The Pilot Valve Group To Modify The Response Of Implement Controls{5059,5462,5465,5466}
1998/12/28
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID VALVE ON CERTAIN 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B AND 345B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID VALVE ON CERTAIN 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B AND 345B EXCAVATORS
Service Letter-CSARL
Service Letter-Americas
Testing and Adjusting
Check Overcurrent at Proportional Reducing Valve - Troubleshoot - 4102
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Check Open Circuit at Proportional Reducing Valve - Troubleshoot - 4103
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Check Short Circuit of Proportional Reducing Valve to Battery Voltage - Troubleshoot
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Proportional Reducing Valve Sweep - Test
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Proportional Reducing Valve - Calibrate
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Disassembly and Assembly
Solenoid Valve (Proportional Reducing) - Remove and Install
312B Excavator Machine Systems
Solenoid Valve (Swing Priority) - Remove and Install
312B Excavator Machine Systems
Solenoid Valve (Travel Speed) - Remove and Install
312B Excavator Machine Systems
Solenoid Valve (Two Speed Travel) - Remove and Install
312B Excavator Machine Systems
Service Magazine
New Swing Control Valve In The Main Hydraulic Control Valve Provides Improved Swing Modulation {5051,5480}
1999/02/15

Truck sale:

Caterpillar 312BL, Construction
43,000 
Caterpillar 312BL, Construction
- Crawler Excavators
CARTER MACHINERY COMPANY, INC.
CATERPILLAR 312BL 1998
 
CATERPILLAR 312BL 1998
- TRACK EXCAVATORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
 
 
CATERPILLAR 312BL 1998
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
2001 CAT 312BL
USD $27,019 
2001 CAT 312BL

BERGERAT MONNOYEUR
SAINT-DENIS, 93, France
 
Call 
1997 CAT 312BL

OREGON TRACTOR & EQ - PARTS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.