AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

274-7396 SENSOR GP-TEMPERATURE S/N 5GG9889-UP PART OF 274-2079 SENSOR GP-ENGINE ALSO AN ATTACHMENT 325C


ELECTRICAL AND STARTING SYSTEM
SENSOR GP
STARTING AID GP
STARTING MOTOR GP
SWITCH GP

EXCAVATOR 325C EXCAVATOR BKW
 325C LCR Mobile Hydraulic Power Unit BKW00001-UP (MACHINE) POWERED BY 3126B Engine SEBC0663 325C BKW   (2001)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP
SENSOR GP-TEMPERATURE
204-0320 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
 

#SEBC06630150
 

274-7396: SENSOR GP-TEMPERATURE

274-7396 SENSOR GP-TEMPERATURE
S/N 5GG9889-UP
PART OF 274-2079 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
i02403863 SEBC0663
2747396 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-9811 [1] SENSOR GP-TEMPERATURE  
2. 6V-6609 [1] SEAL-O-RING  
 

#SEBC06630151
 

194-1686: STARTING AID GP

194-1686 STARTING AID GP -AIR INLET
S/N 5GG8000-UP
24 VOLT. FRONT
PART OF 159-3458 ENGINE AR-COMPLETE
i02079429 SEBC0663
1941686 STARTING AID GP Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-6369 [1] WASHER (0.344X0.75X0.188-IN THK)  
2. 117-7032 [1] WIRE AS  
3. 193-9141 [2] COVER-TERMINAL  
4. 210-3321 M [2] STUD (M8X1.25-THD)  
5. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
6. 4P-8134 [1] CLIP (LADDER)  
7. 5B-5492 [1] WASHER  
8. 5P-7970 M [2] NUT (M8X1.25-THD)  
9. 6V-2317 CM [4] BOLT (M8X1.25X30-MM)  
10. 6V-5192 CM [1] BOLT-SOCKET HEAD (M8X1.25X30-MM)  
11. 6V-5218 M [1] BOLT (M8X1.25X35-MM)  
12. 9M-1974 C [6] WASHER-HARD (8.8X16X2-MM THK)  
13. 223-7577 Y [1] SWITCH GP-MAGNETIC (AIR INLET HEATER)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC06630152
 

194-1686: STARTING AID GP

194-1686 STARTING AID GP -AIR INLET
S/N 5GG8000-UP
24 VOLT. FRONT
PART OF 159-3458, 234-2918 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02546991 SEBC0663
1941686 STARTING AID GP Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-6369 [1] WASHER (0.344X0.75X0.188-IN THK)  
2. 398-0940 CY [1] SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)  
3. 229-8851 C [1] CABLE AS  
  6V-9023 E TUBE-HEAT SHRINK (12.7-MM DIA)(3-CM)  
  030-1712 [1] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
  135-2543 [1] BOOT (RED)  
4. 283-1224 C [1] BRACKET AS  
5. 208-9277 CM [2] BOLT-FLANGE HEAD (M6X1X20-MM)  
6. 208-9282 CM [4] BOLT (M8X1.25X25-MM)  
7. 208-9283 CM [2] BOLT-FLANGE HEAD (M8X1.25X30-MM)  
8. 4P-8134 [1] CLIP (LADDER)  
9. 6V-5192 M [1] BOLT-SOCKET HEAD (M8X1.25X30-MM)  
10. 6V-5218 M [1] BOLT (M8X1.25X35-MM)  
11. 9M-1974 C [2] WASHER-HARD (8.8X16X2-MM THK)  
12. 3S-2093 [1] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC06630153
 

201-4204: STARTING MOTOR GP-ELECTRIC

201-4204 STARTING MOTOR GP-ELECTRIC
S/N 5GG8000-UP
24 VOLT
PART OF 159-3458, 234-2918 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i01653301 SEBC0663
2014204 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-9573 M [3] BOLT-12 POINT HEAD (M10X1.5X35-MM)  
2. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
3. 3K-3257 [1] GASKET  
4. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
5. 201-3153 [1] WIRE AS  
6. 207-1511 Y [1] STARTING MOTOR GP-ELECTRIC  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC06630154
 

207-1511: STARTING MOTOR GP-ELECTRIC

207-1511 STARTING MOTOR GP-ELECTRIC
S/N 5GG8000-UP
24 VOLT
PART OF 201-4204 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1517@@@@@
ALSO AN ATTACHMENT
i01622658 SEBC0663
2071511 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
2. 106-7149 [1] HOUSING AS  
3. 102-9863 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3E-7853 [1] TERMINAL  
7. 9X-4821 [1] PLATE AS  
8. 9X-4822 [1] COIL AS  
9. 7T-3454 [1] INSULATOR  
10. 9X-4271 [1] CONNECTOR  
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 7X-1950 [4] SHOE-POLE  
16. 7X-1958 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER AS, SHAFT AS, GASKET, SEALS, RINGS, STOP & NUT)
17. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
18. 7X-1951 [1] ARMATURE AS (24-VOLT)  
19. 7X-1952 [1] HOUSING AS-LEVER  
20. 4M-1831 [1] PLUG-LEVER HOUSING  
21. 7L-2894 [1] GASKET  
22. 0S-1597 [5] BOLT (1/4-28X1-IN)  
23. 7X-1953 [1] DRIVE AS-MOTOR  
24. 7X-1954 [1] HOUSING AS-DRIVE  
25. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
26. [1] KIT-SOLENOID (24-VOLT, STARTING MOTOR)  
27. 6V-8378 [2] NUT (10-32-THD)  
28. 8F-1434 [1] LOCKWASHER  
29. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
30. 9X-4824 [1] COVER-STARTING MOTOR  
31. 9X-4825 [1] KIT-BRUSH (24-VOLT)  
    (INCLUDES BRUSHES, SEAL, SCREWS & SPRINGS)
   
    AVAILABLE REPAIR KIT(S):
  9X-4270 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, SEALS, CUPS, SPACER, STOP, PLUGS, GASKET, WASHERS, RING & SCREW AS)
 

#SEBC06630155
 

207-1517: STARTING MOTOR GP-ELECTRIC

207-1517 STARTING MOTOR GP-ELECTRIC
S/N 5GG8000-UP
24 VOLT
FIELD REPLACEMENT FOR @@@@@207-1511@@@@@
i01619485 SEBC0663
2071517 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
2. 106-7149 [1] HOUSING AS  
3. 102-9863 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3E-7853 [1] TERMINAL  
7. 9X-4821 [1] PLATE AS  
8. 3E-7852 [1] COIL-STARTING MOTOR  
9. 7T-3454 [1] INSULATOR  
10. 9X-4271 [1] CONNECTOR  
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & GROMMET)
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 7X-1950 [4] SHOE-POLE  
16. 3E-7861 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER AS, SHAFT AS, GASKET, O-RINGS, RING & NUT)
17. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
18. 3E-7855 [1] ARMATURE AS-STARTER (24-VOLT)  
19. 7X-1952 [1] HOUSING AS-LEVER  
20. 4M-1831 [1] PLUG-LEVER HOUSING  
21. 7L-2894 [1] GASKET  
22. 0S-1597 [5] BOLT (1/4-28X1-IN)  
23. 3E-7857 [1] DRIVE AS-STARTING MOTOR  
24. 3E-7858 [1] HOUSING AS  
25. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
26. 206-8784 [1] KIT-SOLENOID (24-VOLT)  
    (INCLUDES SOLENOID AS, BOLT, CONNECTORS & NUTS)
27. 6V-8378 [2] NUT (10-32-THD)  
28. 8F-1434 [1] LOCKWASHER  
29. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
30. 9X-4824 [1] COVER-STARTING MOTOR  
31. 9X-4825 [1] KIT-BRUSH (24-VOLT)  
    (INCLUDES O-RING, SCREWS, BRUSHES & SPRINGS)
   
    AVAILABLE REPAIR KIT(S):
  3E-7860 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, PLUGS, CUPS, SEAL, NUT, O-RINGS, GASKET, SPACER, WASHERS & SCREW ASSEMBLIES)
 

#SEBC06630156
 

7N-0718: SWITCH GP-DISCONNECT

7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N BKW1-UP
PART OF 319-1404 PANEL GP-CIRCUIT BREAKER
AN ATTACHMENT
i01213345 SEBC0663
7N0718 SWITCH GP-DISCONNECT Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3922 [2] LOCKWASHER  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 9F-5644 [2] LOCKWASHER  
4. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
5. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
 

#SEBC06630157
 

7Y-3918: SWITCH GP-HEAT START

7Y-3918 SWITCH GP-HEAT START -KEY
S/N BKW1-UP
PART OF 227-8054 LIGHTING GP-FLOOD, 319-0958 WIRING GP-CONSOLE
ALSO AN ATTACHMENT
i01206638 SEBC0663
7Y3918 SWITCH GP-HEAT START Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8276 [1] NUT  
2. 5I-8275 [1] LOCKWASHER  
3. 5I-8274 [1] WASHER (20.5X29X0.8-MM THK)  
4. 095-0735 M [6] SCREW-MACHINE (M5X0.8X8-MM)  
5. 096-0192 [6] LOCKWASHER (EXTERNAL TOOTH)  
  M   METRIC PART
 

#SEBC06630158
 

125-1302: SWITCH GP-MAGNETIC

125-1302 SWITCH GP-MAGNETIC
S/N BKW1-UP
24-VOLT
PART OF 319-1404 PANEL GP-CIRCUIT BREAKER
AN ATTACHMENT
i01861001 SEBC0663
1251302 SWITCH GP-MAGNETIC Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 1H-3338 [2] LOCKWASHER (EXTERNAL TOOTH)  
4. 012-0380 [2] LOCKWASHER (6.5X12.5X1.6-MM THK)  
5. 5C-2890 M [2] NUT (M6X1-THD)  
6. 9X-1813 E SLEEVE (16-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBC06630159
 

223-7577: SWITCH GP-MAGNETIC

223-7577 SWITCH GP-MAGNETIC
S/N 5GG8000-UP
24 VOLT
PART OF 194-1686 STARTING AID GP
i01835437 SEBC0663
2237577 SWITCH GP-MAGNETIC Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 398-0940 [1] SWITCH GP-MAGNETIC (24-VOLT)  
1A. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
1B. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
1C. 3F-9556 [2] LOCKWASHER  
1D. 6V-8186 [2] NUT-FULL (5/16-24-THD)  
1E. 6V-8378 [2] NUT (10-32-THD)  
1F. 8F-1434 [2] LOCKWASHER  
 

Information:

Specifications
Engine Oil Pressure Sensor - If Equipped
3126B Engine for Caterpillar Built Machines
Atmospheric Pressure Sensor - If Equipped
3126B Engine for Caterpillar Built Machines
Inlet Air Temperature Sensor
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Sensor
3126B Engine for Caterpillar Built Machines
Coolant Temperature Sensor
3126B Engine for Caterpillar Built Machines
Engine Oil Temperature Sensor
3126B Engine for Caterpillar Built Machines
Fuel Pressure Sensor
3126B Engine for Caterpillar Built Machines
Speed/Timing Sensor
3126B Engine for Caterpillar Built Machines
Turbocharger Outlet Pressure Sensor
3126B Engine for Caterpillar Built Machines
Turbocharger Inlet Pressure Sensor
3126B Engine for Caterpillar Built Machines
Speed Sensor
3126B Engine for Caterpillar Built Machines
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
CID 0261 FMI 13 Engine Timing Calibration required
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0094 FMI 04 Fuel Pressure short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
How To Use the Functional Tests
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Sensors and Electrical Connectors
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engine for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Speed/Timing Sensor Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Engine Speed/Timing Sensor - Calibrate
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Throttle Position Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Throttle Position Sensor Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Analog Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Engine Temperature Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
E095 Fuel Filter Restriction Warning
3126B Engine for Caterpillar Built Machines
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Injection Actuation Pressure Sensor - Test
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Sensors and Electrical Connectors
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Analog Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Caterpillar Parts SIS Catalog 325C :

SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
204-0320 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8391 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
191-6587 SENSOR GP-TEMPERATURE
SENSOR GP-SPEED
318-1181 SENSOR GP-SPEED
SENSOR GP-SPEED
236-6221 SENSOR GP-SPEED
SENSOR GP-SPEED
190-6186 SENSOR GP-SPEED
STARTING AID GP
194-1686 STARTING AID GP
STARTING AID GP
194-1686 STARTING AID GP
STARTING MOTOR GP-ELECTRIC
201-4204 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1511 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1517 STARTING MOTOR GP-ELECTRIC
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
SWITCH GP-HEAT START
7Y-3918 SWITCH GP-HEAT START
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC

Truck sale:

 
 
Caterpillar 325C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
304,350 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
304,355 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
 
Caterpillar 325C, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WESTERN STATES EQUIPMENT
Caterpillar 325 CF, Crawler Excavators, Construction
270,965 
Caterpillar 325 CF, Crawler Excavators, Construction
- Crawler excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.