AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

190-5038 WIRING GP-ENGINE S/N 5GG8000-UP HIGH SIDE ACTIVATION OF AIR INLET HEATER RELAY PART OF 159-3458, 234-2918 ENGINE AR-COMPLETE ALSO AN ATTACHMENT 325C


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL
POWER TRAIN AR
SPROCKET GP

EXCAVATOR 325C EXCAVATOR BKW
 325C LCR Mobile Hydraulic Power Unit BKW00001-UP (MACHINE) POWERED BY 3126B Engine SEBC0663 325C BKW   (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CONSOLE
319-0958 WIRING GP-CONSOLE
WIRING GP-CONSOLE
319-0960 WIRING GP-CONSOLE
WIRING GP-ENGINE
190-5038 WIRING GP-ENGINE
231-8226 WIRING GP-MACHINE
231-8228 WIRING GP-MACHINE
WIRING GP-RADIO
193-3421 WIRING GP-RADIO
 

#SEBC06630170
 

190-5038: WIRING GP-ENGINE

190-5038 WIRING GP-ENGINE
S/N 5GG8000-UP
HIGH SIDE ACTIVATION OF AIR INLET HEATER RELAY
PART OF 159-3458, 234-2918 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i01517476 SEBC0663
1905038 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [14] STRAP-CABLE  
2. 105-1797 [6] MOUNT  
3. 153-8920 [1] HARNESS AS-ENGINE (UNIT INJECTOR)  
  6N-7523 [1] WASHER (6.48X11.9X1.57-MM THK)  
  9X-3402 [12] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [12] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  135-5975 [1] GROMMET-WIRING  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, INTERFACE SEAL & WEDGE)
4. 156-6175 [2] CLIP (LADDER)  
5. 195-7336 Y [1] HARNESS AS-ENGINE (ELECTRONIC CONTROL)  
6. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
7. 113-8690 [1] WASHER (11.1X37.9X3.3-MM THK)  
8. 7X-7729 [1] WASHER (11X25X3-MM THK)  
9. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
10. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
11. 156-9890 [1] WASHER (9X30X4-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC06630171
 

231-8226: WIRING GP-MACHINE

231-8226 WIRING GP-MACHINE
S/N BKW1-UP
PART OF 242-4856 CHASSIS AR
i02286670 SEBC0663
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  153-2523 Y [1] LAMP GP-FLOOD (24-VOLT)  
   
  3T-5760 [2] BATTERY GP (12-VOLT, 750-CCA)  
  8T-2396 M [4] BOLT (M6X1X60-MM)  
  8T-4137 M [42] BOLT (M10X1.5X20-MM)  
  8T-4185 M [2] BOLT (M10X1.5X50-MM)  
  8T-4186 M [1] BOLT (M10X1.5X40-MM)  
  8T-4189 M [1] BOLT (M8X1.25X20-MM)  
  8T-4191 M [22] BOLT (M10X1.5X16-MM)  
  8T-4192 M [4] BOLT (M12X1.75X25-MM)  
  8T-4195 M [5] BOLT (M10X1.5X30-MM)  
  8T-4200 M [1] BOLT (M8X1.25X16-MM)  
  8T-5005 M [1] BOLT (M10X1.5X70-MM)  
  116-0068 [1] BRACKET  
  [1] BRACKET  
  128-8928 [1] BRACKET AS  
  170-9336 [1] BRACKET AS  
  224-3594 [1] BRACKET AS  
  224-3595 [1] BRACKET AS  
  116-0161 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  5P-0761 E CABLE (00-GA, RED)(300CM)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  8N-1725 [1] COVER AS-TERMINAL (RED)  
  3S-6049 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
  [1] CABLE AS  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0747 E CABLE (00-GA, BLACK)(109-CM)  
  7N-5274 [1] COVER AS-TERMINAL (BLACK)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  3S-6050 [1] TERMINAL AS-BATTERY (NEGATIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
  170-6929 [1] CABLE AS  
  5P-0761 E CABLE (00-GA, RED)(31CM)  
  9G-0002 [1] COVER AS-TERMINAL (RED)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  9G-0005 [1] COVER AS-TERMINAL (BLACK)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  8C-5918 [1] TERMINAL AS-BATTERY (NEGATIVE)  
  8T-9756 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [2] BOLT (5/16-18X1.375-IN)  
  1M-6120 [2] NUT (5/16-18-THD)  
  6G-2256 [2] CLAMP  
  4K-8302 [4] CLIP (LOOP)  
  4N-9170 [1] CLIP  
  4P-7582 [1] CLIP  
  6K-8178 [3] CLIP  
  7N-3718 [3] CLIP  
  033-8248 [3] CLIP  
  111-4836 [17] CLIP  
  111-4837 [18] CLIP  
  111-4838 [6] CLIP  
  116-0118 [14] CLIP  
  132-5789 [1] CLIP (LADDER)  
  224-3582 [1] COVER AS  
  5I-8270 [1] COVER-BATTERY  
  4I-4653 [1] GROMMET  
  4I-6039 [2] GROMMET  
  5I-4366 [1] GROMMET  
  5I-8307 [1] GROMMET  
  7Y-8169 [1] GROMMET  
  7Y-8170 [1] GROMMET  
  093-2068 [1] GROMMET  
  093-2071 [1] GROMMET  
  115-8645 [1] GUARD  
  224-3583 [1] HARNESS  
  224-3584 [1] HARNESS  
  224-3606 [1] HARNESS  
  163-6750 [1] HARNESS AS-ALARM (HORN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SALE)
  6W-6005 [1] HOLD-DOWN-BATTERY  
  112-6646 M [2] LOCKNUT (M6X1-THD)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  8T-4133 M [3] NUT (M10X1.5-THD)  
  224-3579 [1] PANEL AS  
  186-4574 [1] PLUG AS  
  5I-8304 [1] ROD  
  [1] SEALANT-SILICONE  
  227-7609 [1] SERVICE GP-MACHINE  
  4I-7889 [1] SPACER (11X25X45-MM THK)  
  6G-2263 [3] SPACER (10.5X19X28.5-MM THK)  
  111-4839 [6] STRAP  
  132-1806 [1] STRAP AS-GROUND  
  140-0860 [1] STRAP AS-GROUND  
  3S-2093 [58] STRAP-CABLE  
  7I-2673 [5] STRAP-CABLE  
  7K-1181 [4] STRAP-CABLE  
  224-3591 [1] SUPPORT AS  
  2G-8767 [2] WASHER (10.5X60X3-MM THK)  
  9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
  8T-4121 [74] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  8T-4226 [1] WASHER-PLATED (10.5X45X3-MM THK)  
  224-3601 [1] WIRE AS  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC06630172
 

231-8228: WIRING GP-MACHINE

231-8228 WIRING GP-MACHINE
S/N BKW1-UP
PART OF 219-0097 SPECIAL AR
i02285511 SEBC0663
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4970 M [2] BOLT (M6X1X14-MM)  
  186-4630 [1] BRACKET AS  
  224-3609 [1] HARNESS  
  224-3610 [1] HARNESS  
  149-5050 [2] RELAY (24-VOLT)  
  [1] SEALANT-SILICONE  
  3S-2093 [27] STRAP-CABLE  
  7I-2673 [5] STRAP-CABLE  
  7K-1181 [2] STRAP-CABLE  
  9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBC06630173
 

193-3421: WIRING GP-RADIO

193-3421 WIRING GP-RADIO
S/N BKW1-UP
AM/FM RADIO
PART OF 170-9450 RADIO GP
AN ATTACHMENT
i01635698 SEBC0663
1933421 WIRING GP-RADIO Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-5434 [2] SPEAKER AS  
    (EACH INCLUDES)
  7Y-3951 [2] TERMINAL-BLADE (14-GA)  
  7Y-3954 [1] CONNECTOR-PLUG (3-PIN)  
2. 6V-9492 M [8] SCREW-MACHINE (M4X0.7X25-MM)  
  M   METRIC PART
 

#SEBC06630174
 

238-1706: WIRING GP-SEAT

238-1706 WIRING GP-SEAT
S/N BKW1-UP
PART OF 263-4533 OPERATOR AR
AN ATTACHMENT
i04346357 SEBC0663
2381706 WIRING GP-SEAT Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 324-5648 [1] HARNESS AS-WIRING  
2. 163-6711 [1] SWITCH AS-TOGGLE (AUTO/MANUAL ENGINE SPEED CONT)  
3. 283-3074 [1] SWITCH AS-TOGGLE (PUMP PRESSURE OVERRIDE)  
4. 6V-9673 M [2] SCREW-MACHINE (M5X0.8X12-MM)  
5. 5C-2874 M [2] NUT (M5X0.8-THD)  
6. 8T-0328 [8] WASHER-HARD (5.5X10X1-MM THK)  
7. 132-1903 [2] STRAP-CABLE  
8. 197-4287 [2] CLAMP  
9. 197-4288 [2] CLAMP  
10. 095-0736 M [4] SCREW-MACHINE (M5X0.8X10-MM)  
11. 204-1682 [2] STRAP-CABLE  
12. 324-5649 [1] HARNESS AS-CONTROL  
  3S-2093 [6] STRAP-CABLE  
  121-1173 [15] TERMINAL (MALE)  
  2L-8074 [17] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  163-6799 [1] CONNECTOR-RECEPTACLE  
14. 7X-2619 M [2] BOLT (M6X1X10-MM)  
15. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
16. 3E-5169 [1] GUARD-SWITCH  
  M   METRIC PART
 

#SEBC06630175
 

227-6103: DRIVE GP-FINAL

227-6103 DRIVE GP-FINAL -WITHOUT MOTOR
S/N BKW1-UP
PART OF 227-6104 DRIVE GP-FINAL
ALSO AN ATTACHMENT
i02061240 SEBC0663
2276103 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE  
2. 7Y-0639 [1] GEAR-SUN (21-TEETH)  
3. 7Y-0642 [1] GEAR-RING (63-TEETH)  
4. 7Y-0645 [1] CARRIER  
5. 7Y-0659 [3] GEAR-PLANETARY (22-TEETH)  
6. 7Y-0661 [3] SHAFT-PLANETARY  
7. 7Y-0662 [4] SHAFT-PLANETARY  
8. 7Y-0663 [4] GEAR-PLANETARY (20-TEETH)  
9. 7Y-0667 [1] RING-RETAINING  
10. 7Y-0673 [1] GEAR-RING (73-TEETH)  
11. 7Y-0676 [3] GEAR-PLANETARY (24-TEETH)  
12. 7Y-0731 [1] CARRIER AS  
12A. 7Y-0656 [3] SHAFT-PLANETARY  
13. 7Y-1094 M [14] WASHER (66X102X1-MM THK)  
14. 7Y-5235 M [20] BOLT (M24X3X190-MM)  
15. 094-0577 B [1] PLATE (7-MM THK)  
16. 094-0578 B [1] PLATE (8-MM THK)  
17. 094-0579 B [1] PLATE (9-MM THK)  
18. 094-0580 B [1] PLATE (10-MM THK)  
19. 110-7231 [1] GEAR-SUN (18-TEETH)  
20. 191-2521 [1] GEAR-SUN (23-TEETH)  
21. 196-4873 J [2] BEARING AS-BALL  
22. 199-4582 [3] BEARING AS  
23. 199-4583 [11] BEARING AS  
24. 199-4748 J [1] HOUSING-MOTOR  
25. 199-4750 [1] CARRIER-PLANETARY  
26. 213-4737 J [1] SEAL GP-DUO-CONE  
27. 227-6100 J [1] RETAINER  
28. 227-6101 J [2] PLATE-WASHER  
29. 227-6102 J [2] DOWEL  
30. 093-1731 [1] RING-RETAINING  
31. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
32. 095-0891 [7] PIN-SPRING  
33. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
34. 191-2526 [1] COVER  
35. 191-2645 [1] COUPLING  
36. 199-4580 J [1] HOUSING  
37. 2P-3628 [1] SEAL-O-RING  
38. 7M-8485 [2] SEAL-O-RING  
39. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
40. 7Y-0644 [1] SPACER (163X190X8-MM THK)  
41. 8T-0293 JM [2] BOLT (M12X1.75X20-MM)  
42. 8T-4167 [20] WASHER-HARD (26X44X4-MM THK)  
43. 8T-4240 [3] RING-RETAINING  
44. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
45. 1U-8846 B SEALANT-GASKET  
   
    AVAILABLE REPAIR KIT(S):
  227-6112 J HOUSING GP-MOTOR  
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBC06630176
 

227-6104: DRIVE GP-FINAL

227-6104 DRIVE GP-FINAL -WITH MOTOR
S/N BKW1-UP
PART OF 242-4855 POWER TRAIN AR
ALSO AN ATTACHMENT
i02061231 SEBC0663
2276104 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-5606 Y [1] MOTOR & MTG GP-TRAVEL  
2. 227-6103 Y [1] DRIVE GP-FINAL  
  Y   SEPARATE ILLUSTRATION
 

#SEBC06630177
 

242-4855: POWER TRAIN AR

242-4855 POWER TRAIN AR
S/N BKW1-UP
PART OF 219-0097, 263-4530 SPECIAL AR
ALSO AN ATTACHMENT
i02285557 SEBC0663
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  214-8623 Y [1] DRIVE GP-SWING  
  227-8061 Y [1] FASTENER GP-SWING DRIVE  
  227-6104 Y [2] DRIVE GP-FINAL (WITH MOTOR)  
  168-6727 Y [2] SPROCKET GP (NON-SEGMENTED)  
  Y   SEPARATE ILLUSTRATION
 

#SEBC06630178
 

168-6727: SPROCKET GP

168-6727 SPROCKET GP -NON-SEGMENTED
S/N BKW1-UP
PART OF 242-4855 POWER TRAIN AR
ALSO AN ATTACHMENT
i02087571 SEBC0663
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  448-5101 Y [1] SPROCKET GP (NON-SEGMENTED)  
    -OR-
  448-5102 Y [1] SPROCKET GP (NON-SEGMENTED)  
  Y   SEPARATE ILLUSTRATION
 

#SEBC06630179
 

448-5101: SPROCKET GP

448-5101 SPROCKET GP -NON-SEGMENTED
S/N BKW1-UP
PART OF 168-6727 SPROCKET GP
ALSO AN ATTACHMENT
i05867516 SEBC0663
4485101 SPROCKET GP Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-5685 [1] SPROCKET-TRACK  
2. 447-1722 M [16] BOLT (M24X3X60-MM)  
  M   METRIC PART
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Specifications
Electronic Control Wiring Group
3126B Engine for Caterpillar Built Machines
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Testing and Adjusting
Electric Starting System - Test
3126B Engines
Troubleshooting
CID 0168 FMI 02 System Voltage intermittent/erratic
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0168 FMI 01 System Voltage Low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0168 FMI 00 System Voltage High
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Electrical Connectors - Inspect
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engine for Caterpillar Built Machines
CID 0248 FMI 09 Cat Data Link not communicating
3126B Engine for Caterpillar Built Machines
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0548 FMI 06 Throttle Lock Lamp short
3126B Engine for Caterpillar Built Machines
CID 0548 FMI 05 Throttle Lock Lamp open circuit
3126B Engine for Caterpillar Built Machines
CID 0042 FMI 11 Inject Actuation Control Valve open/short
3126B Engine for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0094 FMI 04 Fuel Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engine for Caterpillar Built Machines
How To Use the Functional Tests
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Sensors and Electrical Connectors
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engine for Caterpillar Built Machines
CID 1627 FMI 05 Fuel Pump Relay open circuit
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 1627 FMI 06 Fuel Pump Relay short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Cat Data Link Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Speed/Timing Sensor Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Injection Actuation Pressure Control Valve Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Switch Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Low Engine Oil Pressure Lamp Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Air Inlet Heater Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Throttle Position Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3126B Engine for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Lock Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Lock Lamp Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Throttle Position Sensor Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Electrical Power Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Fuel Pump Relay Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Air Filter Restriction Lamp - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Shutdown Switch Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Fan Control Solenoid Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Shutdown Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Fan Reversing Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Air Inlet Heater Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Cat Data Link Circuit - Test
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Analog Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Wiring Information
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engine for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 325C :

WIRING GP-CONSOLE
319-0960 WIRING GP-CONSOLE
WIRING GP-CONSOLE
319-0958 WIRING GP-CONSOLE
238-1701 WIRING GP-CONSOLE
231-8418 WIRING GP-CONSOLE
WIRING GP-CONSOLE
204-1764 WIRING GP-CONSOLE
WIRING GP-CAB
213-0741 WIRING GP-CAB
SWITCH GP-TOGGLE
165-5970 SWITCH GP-TOGGLE
SWITCH GP-ROTARY
106-0107 SWITCH GP-ROTARY
231-8226 WIRING GP-MACHINE
231-8228 WIRING GP-MACHINE
WIRING GP-RADIO
193-3421 WIRING GP-RADIO
WIRING GP-SEAT
238-1706 WIRING GP-SEAT
DRIVE GP-FINAL
227-6103 DRIVE GP-FINAL
DRIVE GP-FINAL
227-6104 DRIVE GP-FINAL
242-4855 POWER TRAIN AR
168-6727 SPROCKET GP

Truck sale:

 
 
Caterpillar 325C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
304,350 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
304,355 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
 
Caterpillar 325C, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WESTERN STATES EQUIPMENT
Caterpillar 325 CF, Crawler Excavators, Construction
270,965 
Caterpillar 325 CF, Crawler Excavators, Construction
- Crawler excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.