330-6018 WIRING GP-ELECTRONIC CONTROL S/N THX22180-UP PART OF 240-1861 ENGINE AR-COMPLETE Type 2 330D

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 330-6018 WIRING GP-
1. 238-1580 WIRING GP-
2. 238-1568 WIRING GP-
3. 259-5062 WIRING GP-
4. 269-3410 WIRING GP-
5. 274-5072 WIRING GP-
6. 274-5072 WIRING GP-
7. 274-5072 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

8. 296-6217 DRIVE GP-F
9. 296-6218 DRIVE GP-F
0. INFORMATION

EXCAVATOR 330D EXCAVATOR JJM
330D Custom Waste Handler JJM00001-UP (MACHINE) POWERED BY C9 Engine SEBC0670 330D JJM (2007)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

236-6226 WIRING GP-ELECTRONIC CONTROL

330-6018 WIRING GP-ELECTRONIC CONTROL

238-1580 WIRING GP-FAN

238-1568 WIRING GP-FINE SWING

259-5062 WIRING GP-FUEL SYSTEM

#SEBC06700240

330-6018: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

330-6018 WIRING GP-ELECTRONIC CONTROL
S/N THX22180-UP
PART OF 240-1861 ENGINE AR-COMPLETE
Type 2

i05379102 SEBC0670

3306018 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[18]	STRAP-CABLE
2.	419-0841 CY	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
3.	323-9140 Y	[1]	HARNESS AS-ENGINE (SPEED SENSOR)
4.	4P-7581	[6]	CLIP (LADDER)
5.	4P-8134	[2]	CLIP (LADDER)
6.	5P-7970 M	[3]	NUT (M8X1.25-THD)
7.	6V-5217 M	[1]	BOLT (M8X1.25X20-MM)
8.	6V-5839	[3]	WASHER (11X21X2.5-MM THK)
9.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
10.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
11.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
13.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
14.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
15.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
16.	6V-4369 C	[1]	CLIP
17.	439-4571 C	[5]	CLIP
18.	440-0881 CM	[5]	BOLT-SOCKET HEAD (M8X1.25-THD)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBC06700241

238-1580: WIRING GP-FAN

WIRING GP-FAN

238-1580 WIRING GP-FAN -REVERSING
S/N JJM1-UP
PART OF 290-8238 CHASSIS AR

i02448786 SEBC0670

For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	7K-1181	[12]	STRAP-CABLE
3.	238-1601	[1]	HARNESS AS-CONTROL

#SEBC06700242

238-1568: WIRING GP-FINE SWING

WIRING GP-FINE SWING

238-1568 WIRING GP-FINE SWING
S/N JJM1-UP
PART OF 290-8238 CHASSIS AR

i02467830 SEBC0670

2381568 WIRING GP-FINE SWING Parts scheme

For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	111-4836	[4]	CLIP
2.	111-4837	[3]	CLIP
3.	275-6865	[1]	HARNESS AS-SOLENOID (FINE SWING)
4.	238-2171	[1]	BRACKET AS
5.	8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
7.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
	M		METRIC PART

#SEBC06700243

259-5062: WIRING GP-FUEL SYSTEM

WIRING GP-FUEL SYSTEM

259-5062 WIRING GP-FUEL SYSTEM -PRIMING PUMP
S/N JJM1-UP
PART OF 290-8238 CHASSIS AR

i02467826 SEBC0670

2595062 WIRING GP-FUEL SYSTEM Parts scheme

For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[10]	STRAP-CABLE
2.	7K-1181	[16]	STRAP-CABLE
3.	137-6606	[1]	FILM-IDENTIFICATION (FUEL)
4.	165-5970 Y	[1]	SWITCH GP-TOGGLE (FUEL PRIMING PUMP ON, OFF)
5.	275-6938	[1]	HARNESS AS-PUMP (FUEL PRIMING)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	Y		SEPARATE ILLUSTRATION

#SEBC06700244

269-3410: WIRING GP-HEATER

WIRING GP-HEATER

269-3410 WIRING GP-HEATER -AIR INLET MANIFOLD
S/N THX795-UP
PART OF 240-1861 ENGINE AR-COMPLETE

i02431164 SEBC0670

For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	398-0940 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER RELAY)
3.	224-1377	[1]	CABLE AS
4.	283-1226	[1]	BRACKET AS
5.	208-9277 M	[2]	BOLT-FLANGE HEAD (M6X1X20-MM)
6.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
7.	6V-6317 M	[1]	BOLT (M10X1.5X20-MM)
8.	6V-4248 M	[1]	BOLT (M10X1.5X25-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBC06700245

274-5072: WIRING GP-PLATFORM

WIRING GP-PLATFORM

274-5072 WIRING GP-PLATFORM
S/N JJM1-UP
PART OF 267-5129 OPERATOR AR
Type 1

i02470148 SEBC0670

For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181	[12]	STRAP-CABLE
4.	111-4836	[3]	CLIP
5.	111-4838	[3]	CLIP
6.	111-4839	[3]	STRAP
7.	116-0118	[12]	CLIP
8.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
9.	274-5073	[1]	HARNESS AS-PLATFORM
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INLCUDES RECEPTACLE & WEDGE)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(PLUG KITS INCLUDE PLUG AS, WEDGE & INTERFACE SEAL)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4508	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	197-4385	[2]	DIODE
	3S-2093	[24]	STRAP-CABLE
10.	278-9575	[1]	COVER
11.	095-0728 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
12.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
13.	247-0896	[1]	HARNESS AS-WIRING (CONVERTER)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5011	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
14.	7X-2621 M	[6]	BOLT (M10X1.5X12-MM)
15.	7Y-3173 M	[6]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
16.	8T-0328	[6]	WASHER-HARD (5.5X10X1-MM THK)
17.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
18.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
	M		METRIC PART

#SEBC06700246

274-5072: WIRING GP-PLATFORM

WIRING GP-PLATFORM

274-5072 WIRING GP-PLATFORM
S/N JJM1-UP
PART OF 267-5129 OPERATOR AR
Type 2

i03485484 SEBC0670

For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	6Y-6584 C	[1]	STRAP AS-GROUND
3.	7K-1181	[12]	STRAP-CABLE
4.	111-4836	[3]	CLIP
5.	111-4838	[3]	CLIP
6.	111-4839	[3]	STRAP
7.	116-0118 C	[13]	CLIP
8.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
9.	330-1927 C	[1]	HARNESS AS-PLATFORM
10.	278-9575	[1]	COVER
11.	095-0728 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
12.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
13.	247-0896	[1]	HARNESS AS-WIRING (CONVERTER)
14.	7X-2621 M	[6]	BOLT (M10X1.5X12-MM)
15.	7Y-3173 M	[6]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
16.	8T-0328	[6]	WASHER-HARD (5.5X10X1-MM THK)
17.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
18.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBC06700247

274-5072: WIRING GP-PLATFORM

WIRING GP-PLATFORM

274-5072 WIRING GP-PLATFORM
S/N JJM1-UP
PART OF 267-5129 OPERATOR AR
Type 3

i04077649 SEBC0670

For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	6Y-6584	[1]	STRAP AS-GROUND
3.	7K-1181	[12]	STRAP-CABLE
4.	111-4836	[3]	CLIP
5.	111-4838	[3]	CLIP
6.	111-4839	[3]	STRAP
7.	116-0118	[13]	CLIP
8.	278-9575	[1]	COVER
9.	324-5770 C	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
10.	330-1927	[1]	HARNESS AS-PLATFORM
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[24]	STRAP-CABLE
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	8T-8729	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[23]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[30]	PLUG-SEAL
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[8]	TERMINAL (FEMALE)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1039	[1]	TERMINAL (MALE)
	121-1168	[2]	CONNECTOR-RECEPTACLE
	121-1173	[33]	TERMINAL (MALE)
	125-4766	[1]	PLUG-CONNECTOR (17-PIN)
	125-4841	[1]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	9X-3402	[90]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[92]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	128-8952	[1]	WEDGE-PLUG LOCK (17-PIN)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8052	[1]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
	2L-8060	[1]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
	2L-8069	[4]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[2]	SEAL
	9X-3401	[36]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[36]	PIN-CONNECTOR (14-GA TO 16-GA)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	163-6759	[1]	SEAL
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[2]	DIODE
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
			(EACH INCLUDES)
	264-7032	[1]	SEAL-CONNECTOR
	238-2363	[23]	TERMINAL (FEMALE)
	238-2366	[5]	TERMINAL (MALE)
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4508	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
11.	357-3009 C	[1]	HARNESS AS-WIRING (CONVERTER)
	8T-8737	[6]	PLUG-SEAL
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	126-1767	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	126-1768	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	230-5011	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
12.	095-0728 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
13.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
14.	7X-2621 M	[6]	BOLT (M10X1.5X12-MM)
15.	7Y-3173 CM	[4]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
16.	8T-0328 C	[4]	WASHER-HARD (5.5X10X1-MM THK)
17.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
18.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBC06700248

296-6217: DRIVE GP-FINAL

DRIVE GP-FINAL

296-6217 DRIVE GP-FINAL -WITH MOTOR
S/N JJM1-223
PART OF 275-9337 POWER TRAIN AR

i02747548 SEBC0670

For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
296-6218 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
191-5606 Y	[1]	MOTOR & MTG GP-TRAVEL
Y		SEPARATE ILLUSTRATION

#SEBC06700249

296-6218: DRIVE GP-FINAL

DRIVE GP-FINAL

296-6218 DRIVE GP-FINAL -WITHOUT MOTOR
S/N JJM1-223
PART OF 296-6217 DRIVE GP-FINAL

i02818342 SEBC0670

For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE
2.	7Y-0639	[1]	GEAR-SUN (21-TEETH)
3.	7Y-0642	[1]	GEAR-RING (63-TEETH)
4.	7Y-0643	[1]	CARRIER
5.	7Y-0645	[1]	CARRIER
6.	7Y-0659	[3]	GEAR-PLANETARY (22-TEETH)
7.	7Y-0661	[3]	SHAFT-PLANETARY
8.	7Y-0662	[4]	SHAFT-PLANETARY
9.	7Y-0663	[4]	GEAR-PLANETARY (20-TEETH)
10.	7Y-0667	[1]	RING-RETAINING
11.	7Y-0673	[1]	GEAR-RING (73-TEETH)
12.	7Y-0676	[3]	GEAR-PLANETARY (24-TEETH)
13.	7Y-0731	[1]	CARRIER AS
13A.	7Y-0656	[3]	SHAFT-PLANETARY
14.	7Y-1056 BJ	[1]	SHIM (0.8-MM THK)
	7Y-1057 BJ	[1]	SHIM (1-MM THK)
	267-6809 BJ	[1]	SHIM (0.75-MM THK)
	267-6810 BJ	[1]	SHIM (0.85-MM THK)
	267-6811 BJ	[1]	SHIM (0.9-MM THK)
	267-6812 BJ	[1]	SHIM (0.95-MM THK)
	267-6813 BJ	[1]	SHIM (1.2-MM THK)
	267-6814 BJ	[1]	SHIM (1.4-MM THK)
	267-6815 BJ	[1]	SHIM (1.8-MM THK)
	267-6816 BJ	[1]	SHIM (2-MM THK)
	267-6817 BJ	[1]	SHIM (2.3-MM THK)
16.	7Y-1094 M	[14]	WASHER (66X102X1-MM THK)
17.	7Y-5235 M	[20]	BOLT (M24X3X190-MM)
18.	094-0577	[1]	PLATE (7-MM THK)
19.	094-0578	[1]	PLATE (8-MM THK)
20.	094-0579	[1]	PLATE (9-MM THK)
21.	094-0580	[1]	PLATE (10-MM THK)
22.	110-7231	[1]	GEAR-SUN (18-TEETH)
23.	114-1541 J	[6]	PIN-DOWEL
24.	191-2521	[1]	GEAR-SUN (23-TEETH)
25.	191-2526	[1]	COVER
26.	199-4582	[3]	BEARING AS
27.	199-4583	[11]	BEARING AS
28.	227-6190 J	[1]	HOUSING-MOTOR
29.	227-6191 J	[1]	HOUSING (SPROCKET)
30.	227-6192 J	[1]	GEAR-COUPLING (66-TEETH)
31.	255-2272 CJ	[1]	SEAL GP-DUO-CONE
	205-9114	[2]	RING-TORIC
41.	279-0344 J	[2]	BEARING AS-TAPERED ROLLER
42.	093-1731	[1]	RING-RETAINING
43.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
44.	095-0891	[7]	PIN-SPRING
45.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
46.	191-2645	[1]	COUPLING
47.	2P-3628	[1]	SEAL-O-RING
48.	6V-8133 JM	[10]	BOLT (M24X3X80-MM)
49.	6V-8237 J	[10]	WASHER (26X44X4-MM THK)
50.	7M-8485	[2]	SEAL-O-RING
51.	7Y-0595	[2]	SPACER (58X79.6X6-MM THK)
52.	7Y-0644	[1]	SPACER (163X190X8-MM THK)
53.	8T-4167	[20]	WASHER-HARD (26X44X4-MM THK)
54.	8T-4240	[3]	RING-RETAINING
55.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
56.	1U-8846 B		SEALANT-GASKET

			AVAILABLE REPAIR KIT(S):
	296-6219 J	[1]	KIT-HOUSING (FINAL DRIVE)
			(ALSO INCLUDES HARD WASHER, BOLTS,COVER, & PLATE AS)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
330D Waste Handler

Battery - Recycle
330D Waste Handler

Power Receptacle - If Equipped
330D Waste Handler

Battery Disconnect Switch
330D Waste Handler

Fuses - Replace
330D Waste Handler

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Technical Information Bulletin

Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C9 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connector - Inspect
AccuGrade^® GPS (CD700)

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS (CD700)

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS (CD700)

Overload Warning - Set - If Equipped
330D, 336D and 340D Excavators Hydraulic System

Connector Contact Description
AccuGrade^® GPS (CD700)

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

Electrical Power Supply
AccuGrade^® GPS (CD700)

CAN Data Link - Test
AccuGrade^® GPS (CD700)

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/04/13