AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

199-4539 DRIVE GP-SWING -WITHOUT MOTOR S/N JJM1-223 PART OF 267-6753 DRIVE GP-SWING 330D EXCAVATOR


HYDRAULIC SYSTEM
DRIVE GP
FILTER GP

EXCAVATOR 330D EXCAVATOR JJM
 330D Custom Waste Handler JJM00001-UP (MACHINE) POWERED BY C9 Engine SEBC0670 330D JJM   (2007)

HYDRAULIC SYSTEM

DRIVE GP
DRIVE GP-AUXILIARY PUMP
234-4620 DRIVE GP-AUXILIARY PUMP
DRIVE GP-AUXILIARY PUMP
295-9441 DRIVE GP-AUXILIARY PUMP
DRIVE GP-SWING
199-4539 DRIVE GP-SWING
DRIVE GP-SWING
267-6753 DRIVE GP-SWING
DRIVE GP-SWING
333-2959 DRIVE GP-SWING
DRIVE GP-SWING
333-2962 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
191-2577 FASTENER GP-SWING & FINAL DR
 

#SEBC06700360
 

199-4539: DRIVE GP-SWING

199-4539 DRIVE GP-SWING -WITHOUT MOTOR
S/N JJM1-223
PART OF 267-6753 DRIVE GP-SWING
i02486514 SEBC0670
1994539 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-4602 [4] GEAR-PLANETARY (24-TEETH)  
2. 094-1528 [8] WASHER (53X84X1-MM THK)  
3. 148-4608 [4] SHAFT-PLANETARY  
4. 114-1399 [1] PIPE-GAUGE  
5. 148-4600 [1] GEAR-SUN (17-TEETH)  
6. 7I-7684 M [2] SPACER (50X79.6X6-MM THK)  
7. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
8. 199-4540 [1] COVER-HOUSING  
9. 096-1441 [1] RING-RETAINING  
10. 093-1730 [1] RING-RETAINING  
11. 148-4601 [1] GEAR-SUN (17-TEETH)  
12. 191-2511 [1] CARRIER-PLANETARY  
13. 114-1322 [1] RING-RETAINING  
14. 148-4607 [1] CARRIER-PLANETARY  
15. 148-4604 [1] GEAR-RING (67-TEETH)  
16. 1U-8846 B SEALANT-GASKET  
17. 171-9413 [1] SPACER (140.5X160X103.2-MM THK)  
18. 110-7149 [1] RING-RETAINING  
19. 9U-8693 [1] BEARING-ROLLER  
20. 7I-7619 [1] BEARING-ROLLER  
21. 128-9170 [2] SEAL-LIP TYPE  
22. 148-4605 [1] SHAFT-PINION  
23. 7I-7611 [1] CAGE  
24. 8T-4183 M [10] BOLT (M12X1.75X40-MM)  
25. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 5M-4454 [1] SEAL-O-RING  
27. 191-2524 [1] HOUSING  
28. 6V-7238 [1] VALVE-SHUTOFF  
29. 3K-0360 [1] SEAL-O-RING  
30. 148-4611 [8] WASHER (71.3X112X1-MM THK)  
31. 191-2514 [8] BEARING AS  
32. 148-4609 [4] SHAFT-PLANETARY  
33. 148-4603 [4] GEAR-PLANETARY (24-TEETH)  
34. 099-5194 [8] PIN-SPRING  
35. 8T-6383 M [24] BOLT (M16X2X200-MM)  
36. 9X-8257 [24] WASHER (17.5X30X3.5-MM THK)  
37. 191-2513 [4] BEARING AS-ROLLER  
38. 227-6221 C [1] BREATHER AS (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  267-6785 [1] PIPE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBC06700361
 

267-6753: DRIVE GP-SWING

267-6753 DRIVE GP-SWING -WITH MOTOR
S/N JJM1-223
PART OF 275-9337 POWER TRAIN AR
i02466200 SEBC0670
2676753 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-4539 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
2. 266-7921 Y [1] MOTOR GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBC06700362
 

333-2959: DRIVE GP-SWING

333-2959 DRIVE GP-SWING -WITHOUT MOTOR
S/N JJM224-UP
PART OF 333-2962 DRIVE GP-SWING
i03728200 SEBC0670
3332959 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 6V-7238 [1] VALVE-SHUTOFF (SWING DRIVE)  
3. 7I-7611 [1] CAGE  
4. 7I-7619 [1] BEARING-ROLLER  
5. 7I-7684 M [2] SPACER (50X79.6X6-MM THK)  
6. 9U-8693 [1] BEARING-ROLLER  
7. 093-1730 [1] RING-RETAINING  
8. 094-1528 [8] WASHER (53X84X1-MM THK)  
9. 096-1441 [1] RING-RETAINING  
10. 110-7149 [1] RING-RETAINING  
11. 114-1322 [1] RING-RETAINING  
12. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
13. 114-1399 [1] PIPE-GAUGE  
14. 127-3872 I [1] HOSE AS  
15. 136-2802 [2] CONNECTOR  
16. 136-2803 [2] CLIP  
17. 148-4600 [1] GEAR-SUN (17-TEETH)  
18. 148-4601 [1] GEAR-SUN (17-TEETH)  
19. 148-4602 [4] GEAR-PLANETARY (24-TEETH)  
20. 148-4603 [4] GEAR-PLANETARY (24-TEETH)  
21. 148-4604 [1] GEAR-RING (67-TEETH)  
22. 148-4605 [1] SHAFT-PINION  
23. 148-4607 [1] CARRIER-PLANETARY  
24. 148-4608 [4] SHAFT-PLANETARY  
25. 148-4609 [4] SHAFT-PLANETARY  
26. 148-4611 [8] WASHER (71.3X112X1-MM THK)  
27. 171-9413 [1] SPACER (140.5X160X103.2-MM THK)  
28. 191-2511 [1] CARRIER-PLANETARY  
29. 191-2513 [4] BEARING AS-ROLLER  
30. 191-2514 [8] BEARING AS  
31. 191-2524 [1] HOUSING  
32. 199-4540 [1] COVER-HOUSING  
33. 227-6215 [1] BOSS (1/4-18-THD)  
34. 099-5194 [8] PIN-SPRING  
35. 128-9170 [2] SEAL-LIP TYPE  
36. 3K-0360 [1] SEAL-O-RING  
37. 5M-4454 [1] SEAL-O-RING  
38. 8T-4183 M [10] BOLT (M12X1.75X40-MM)  
39. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 8T-4244 M [1] NUT (M12X1.75-THD)  
41. 8T-4956 M [1] BOLT (M12X1.75X35-MM)  
42. 8T-6383 M [24] BOLT (M16X2X200-MM)  
43. 9X-8257 [24] WASHER (17.5X30X3.5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBC06700363
 

333-2962: DRIVE GP-SWING

333-2962 DRIVE GP-SWING
S/N JJM224-UP
PART OF 275-9337 POWER TRAIN AR
i03728224 SEBC0670
3332962 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 266-7921 Y [1] MOTOR GP-SWING  
2. 333-2959 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBC06700364
 

191-2577: FASTENER GP-SWING & FINAL DR

191-2577 FASTENER GP-SWING & FINAL DR
S/N JJM1-UP
PART OF 275-9337 POWER TRAIN AR
i01593561 SEBC0670
1912577 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-5878 M [40] BOLT (M24X3X80-MM)  
2. 8T-4167 [63] WASHER-HARD (26X44X4-MM THK)  
3. 7X-2576 M [23] BOLT (M24X3X70-MM)  
4. 1U-8846 B SEALANT-GASKET  
5. 5P-0767 E HOSE (90-CM)  
6. 2B-7561 [2] CORK  
7. 096-4755 [1] PIN  
8. 5D-1026 [1] CLAMP-BAND  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBC06700365
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N JJM1-223
PART OF 239-1611 TANK & FILTER GP-HYDRAULIC
i01408164 SEBC0670
1588987 FILTER & VALVE GP-PILOT Parts scheme 1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 J [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
2A. 095-1584 [1] SEAL-O-RING  
2B. 095-1590 [1] SEAL-O-RING  
2C. 095-1596 [1] SEAL-O-RING  
3. 126-1813 AL [1] FILTER-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC, PILOT)  
4. 103-8236 AL [1] RING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  A   NOT PART OF THIS GROUP
  J   FOR USE WITH FILTER BASE WITH M45X2-THD)
  L   ALTERNATE DESIGN-FOR USE WITH FILTER BASE WITH 2-12 THD
 

#SEBC06700366
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N JJM224-UP
PART OF 239-1611 TANK & FILTER GP-HYDRAULIC
i07000301 SEBC0670
1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
2A. 095-1584 [1] SEAL-O-RING  
2B. 095-1590 [1] SEAL-O-RING  
2C. 095-1596 [1] SEAL-O-RING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
 

#SEBC06700367
 

188-4140: FILTER GP-OIL

188-4140 FILTER GP-OIL -HYDRAULIC RETURN
S/N JJM1-UP
PART OF 239-1611 TANK & FILTER GP-HYDRAULIC
Type 1
i02420173 SEBC0670
1884140 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-3503 Y [1] BLOCK GP-HYDRAULIC  
2. 129-8034 [1] VALVE AS-BYPASS  
3. 123-2003 [2] SEAL-O-RING  
4. 173-3507 [1] HOUSING AS  
5. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
6. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 188-4142 Y [1] FILTER GP-OIL (HYDRAULIC RETURN)  
8. 173-3510 [1] COVER  
9. 173-3518 [1] INDICATOR AS (HYDRAULIC RETURN FILTER)  
10. 159-7784 [1] SEAL-O-RING  
11. 6V-4298 M [4] BOLT (M5X0.8X16-MM)  
12. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-6693 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC06700368
 

188-4140: FILTER GP-OIL

188-4140 FILTER GP-OIL -HYDRAULIC RETURN
S/N JJM1-UP
PART OF 239-1611 TANK & FILTER GP-HYDRAULIC
Type 2
i05901561 SEBC0670
1884140 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-3503 Y [1] BLOCK GP-HYDRAULIC  
2. 129-8034 [1] VALVE AS-BYPASS  
3. 123-2003 [2] SEAL-O-RING  
4. 173-3507 [1] HOUSING AS  
5. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
6. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 419-8528 CY [1] FILTER GP-OIL (HYDRAULIC RETURN)  
8. 173-3510 [1] COVER  
9. 173-3518 [1] INDICATOR AS (HYDRAULIC RETURN FILTER)  
10. 159-7784 [1] SEAL-O-RING  
12. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-6693 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC06700369
 

188-4142: FILTER GP-OIL

188-4142 FILTER GP-OIL -HYDRAULIC RETURN
S/N JJM1-UP
PART OF 188-4140 FILTER GP-OIL
i02160184 SEBC0670
1884142 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 330D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-2762 [1] PLATE  
2. 173-3529 JM [6] BOLT (M6X1X15-MM)  
3. 3T-7528 J [6] SEAL-O-RING  
4. 173-3513 [1] BASE  
5. 3E-4297 J [2] SEAL-O-RING  
6. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
7. 188-4143 [1] FILM-INSTRUCTION (HYDRAULIC OIL RETURN FILTER)  
8. 179-9806 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY)(HYDRAULIC RETURN)  
9. 137-3623 J [4] SEAL-O-RING  
10. 6V-7658 J [2] SEAL-O-RING  
11. 177-2553 J [1] SEAL-O-RING  
12. 095-1681 J [1] SEAL-O-RING  
13. 173-3515 [1] RING-RETAINING  
14. 173-3516 [1] HANDLE  
15. 4J-7533 J [1] SEAL-O-RING  
16. 9S-4180 J [1] PLUG  
17. 137-3624 JM [8] SCREW (M3X0.5X5-MM)  
18. 137-3625 J [2] PAD  
19. 173-3517 [1] PLATE  
20. 137-3628 J [1] SHIM (0.1-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  201-9299 J [1] KIT-SERVICE (HYDRAULIC RETURN FILTER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Swing Drive Oil Sample - Obtain
330D Waste Handler
Swing Drive Oil - Change
330D Waste Handler
Swing Drive Oil Level - Check
330D Waste Handler
Specifications
Swing Drive
330D and 336D Excavators Machine System Specifications
Fasteners - Swing Drive and Final Drive
330D and 336D Excavators Machine System Specifications
Swing Drive
330D and 336D Excavators Machine System Specifications
Systems Operation
Swing Drive
330D, 336D and 340D Excavators Hydraulic System
Testing and Adjusting
Fan Motor Speed (Hydraulic and Radiator Cooling) - Test and Adjust
330D, 336D and 340D Excavators Hydraulic System
Disassembly and Assembly
Swing Drive - Disassemble
330D Waste Handler Machine Systems
Swing Motor - Disassemble
330D Waste Handler Machine Systems
Swing Motor - Assemble
330D Waste Handler Machine Systems
Swing Drive - Assemble
330D Waste Handler Machine Systems
Swing Drive - Remove
330D Waste Handler Machine Systems
Swing Drive - Install
330D Waste Handler Machine Systems
Pump Drive Group - Assemble - Auxiliary
330D Waste Handler Machine Systems
Pump Drive Group - Disassemble - Auxiliary
330D Waste Handler Machine Systems
Pump Drive Group - Remove - Auxiliary
330D Waste Handler Machine Systems
Pump Drive Group - Install - Auxiliary
330D Waste Handler Machine Systems
Service Magazine
The Breather for the Swing Drive has been Improved for 330D and 336D Excavators {5459}
2009/06/29
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 330D :

DRIVE GP-AUXILIARY PUMP
295-9441 DRIVE GP-AUXILIARY PUMP
DRIVE GP-AUXILIARY PUMP
234-4620 DRIVE GP-AUXILIARY PUMP
CYLINDER GP-STICK
375-1722 CYLINDER GP-STICK
CYLINDER GP-STICK
289-8031 CYLINDER GP-STICK
CYLINDER GP-BUCKET
357-9766 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
315-4451 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
289-8012 CYLINDER GP-BUCKET
CYLINDER GP-BOOM
311-9526 CYLINDER GP-BOOM
DRIVE GP-SWING
267-6753 DRIVE GP-SWING
DRIVE GP-SWING
333-2959 DRIVE GP-SWING
DRIVE GP-SWING
333-2962 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
191-2577 FASTENER GP-SWING & FINAL DR
FILTER & VALVE GP-PILOT
158-8987 FILTER & VALVE GP-PILOT
FILTER & VALVE GP-PILOT
158-8987 FILTER & VALVE GP-PILOT
FILTER GP-OIL
188-4140 FILTER GP-OIL
FILTER GP-OIL
188-4140 FILTER GP-OIL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.