116-6281 SPECIAL AR -CUSTOM LOW GROUND PRESSURE 312-A EXCAVATOR

Part No	Qty	Parts name
102-6433 Y	[2]	FINAL DRIVE GP
143-5232 Y	[1]	FRAME AR
106-6776 Y	[1]	GUARD GP-SWIVEL
106-6748 Y	[1]	GUARD GP-TRAVEL MOTOR
102-8087 Y	[1]	IDLER GP-FRONT
128-2199 Y	[1]	LINES GP-TRAVEL MOTOR
102-8130 Y	[2]	SPROCKET GP-NONSEGMENTED
143-5058 Y	[1]	STEP GP
102-8125 Y	[2]	TRACK GP
116-6280	[1]	CONTERWEIGHT AS
	[1]	FILM-312LGP
	[1]	FILM-312LGP
Y		SEPARATE ILLUSTRATION

#SEBC10530002

132-9147: HARNESS GP-IMPLEMENT CONTROL

HARNESS GP-IMPLEMENT CONTROL

132-9147 HARNESS GP-IMPLEMENT CONTROL -CUSTOM
SINGLE ACTION
PART OF 114-5290 CONTROL AR-AUXILIARY

i00989078 SEBC1053

1329147 HARNESS GP-IMPLEMENT CONTROL Parts scheme

For full view, you need register

Parts for your 312-A EXCAVATOR:

Pos.	Part No	Qty	Parts name	Comments
1.	133-4652	[1]	HARNESS AS
2.	3S-2093	[4]	STRAP-CABLE (1.75IN DIA)

#SEBC10530003

5I-8250: LAMP GP-FLOOD

LAMP GP-FLOOD

5I-8250 LAMP GP-FLOOD
PART OF 112-6734, 113-6283 LIGHTING GP-BOOM

i00383741 SEBC1053

For full view, you need register

Parts for your 312-A EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	9X-8488 M	[1]	NUT-HEX THIN (M12X1.5 THD)
2.	8T-4223	[1]	WASHER-HARD (3MM THK)
3.	9X-3463	[1]	LAMP
4.	6V-5210 M	[2]	SCREW-MACHINE (M4X0.7 THD)
5.	3B-4501	[2]	LOCKWASHER (NO.8)
6.	106-0001	[1]	LENS AS
7.	106-0002	[1]	BAND
8.	106-0003	[1]	RING-RUBBER
9.	106-0004	[1]	RING-FITTING
10.	106-0005	[1]	SEAT
11.	145-0556	[1]	BOLT-FLAT HEAD
12.	7Y-5288 M	[2]	SCREW-PAN HEAD
	M		METRIC PART

#SEBC10530004

112-6734: LIGHTING GP-BOOM

LIGHTING GP-BOOM

112-6734 LIGHTING GP-BOOM -CUSTOM
PART OF 3A-8965 BOOM AR-PARALLEL OFFSET
FOR USE WITH PARALLEL OFFSET BOOM

i00977031 SEBC1053

For full view, you need register

Parts for your 312-A EXCAVATOR:

Part No	Qty	Parts name
8T-4190 M	[1]	BOLT (M16X2.0X25MM)
5I-8273	[1]	BRACKET
4D-8123	[4]	CLIP (7.94MM ID)
6D-3479	[4]	CLIP (14.29MM ID)
3A-9201	[1]	HARNESS AS
5I-8250 Y	[1]	LAMP GP-FLOOD
8T-4133 M	[5]	NUT (M10X1.50 THD)
8T-4121	[5]	WASHER (2.5MM THK)
9X-8257	[1]	WASHER (3.50MM THK)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBC10530005

113-6283: LIGHTING GP-BOOM

LIGHTING GP-BOOM

113-6283 LIGHTING GP-BOOM -CUSTOM
LEFT HAND
PART OF 3A-8964 BOOM AR-ADJUSTABLE
FOR USE WITH VARIABLE ADJUSTABLE BOOM

i00975817 SEBC1053

For full view, you need register

Parts for your 312-A EXCAVATOR:

Part No	Qty	Parts name
8T-4190 M	[1]	BOLT (M16X2.0X25MM)
5I-8273	[1]	BRACKET
4I-5460	[1]	HARNESS AS
5I-8250 Y	[1]	LAMP GP-FLOOD
9X-8257	[1]	WASHER (3.50MM THK)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBC10530006

116-4458: WIRING GP-AUXILIARY CONTROL

WIRING GP-AUXILIARY CONTROL

116-4458 WIRING GP-AUXILIARY CONTROL -CUSTOM
PIN 6BL1-1095
MEDIUM PRESSURE
PART OF 122-4536 CONTROL AR-AUXILIARY, 122-4538 CONTROL AR-SWING & BLADE

i00982896 SEBC1053

For full view, you need register

Parts for your 312-A EXCAVATOR:

Part No	Qty	Parts name
118-1991	[1]	HARNESS AS
122-5765	[1]	HARNESS AS
113-2523 Y	[1]	VALVE GP-PILOT
113-2524 Y	[1]	VALVE GP-PILOT
Y		SEPARATE ILLUSTRATION

#SEBC10530007

116-4458: WIRING GP-AUXILIARY CONTROL

WIRING GP-AUXILIARY CONTROL

116-4458 WIRING GP-AUXILIARY CONTROL -CUSTOM
PIN 6BL1096-UP
MEDIUM PRESSURE
PART OF 122-4536 CONTROL AR-AUXILIARY

i00982992 SEBC1053

1164458 WIRING GP-AUXILIARY CONTROL Parts scheme

For full view, you need register

Parts for your 312-A EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	118-1991	[1]	HARNESS AS
2.	129-5643 Y	[1]	LINES GP-PILOT
3.	129-5660	[1]	HARNESS AS
4.	3S-2093	[4]	STRAP-CABLE (1.75IN DIA)
5.	5P-9085	[3]	CLIP
6.	117-3866	[1]	HARNESS AS
7.	1J-9671	[1]	SEAL-O-RING (10.52MM ID)
8.	5P-1318	[1]	ADAPTER
9.	101-3082	[1]	SWITCH AS-PRESSURE
	7N-7779	[1]	SOCKET
	7N-7780	[2]	PIN-CONNECTOR (BLADE)
	7N-7781	[1]	HOUSING-RECEPTACLE
10.	119-6933	[1]	HARNESS AS
	Y		SEPARATE ILLUSTRATION

#SEBC10530008

102-6433: FINAL DRIVE GP

FINAL DRIVE GP

102-6433 FINAL DRIVE GP
WITH MOTOR
PART OF 116-6281 SPECIAL AR

i00466574 SEBC1053

For full view, you need register

Parts for your 312-A EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	107-6553 Y	[1]	MOTOR GP-TRAVEL
2.	7X-3345 M	[2]	BOLT-SOCKET HEAD
3.	102-6500 Y	[1]	FINAL DRIVE GP
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBC10530009

102-6500: FINAL DRIVE GP

FINAL DRIVE GP

102-6500 FINAL DRIVE GP
PART OF 102-6433 FINAL DRIVE GP

i00466582 SEBC1053

For full view, you need register

Parts for your 312-A EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	102-6533	[3]	PLATE
2.	096-8039	[1]	SEAL
3.	096-5971	[1]	PLUG
4.	102-6525	[2]	BEARING
5.	102-6532	[3]	PIN
6.	102-6526	[1]	HOUSING
7.	102-6544	[1]	SHIM PACK (INCLUDES 6 SHIMS)
8.	102-6517	[6]	COLLAR
9.	102-6536	[3]	PIN
10.	102-6515	[3]	SHAFT
11.	102-6513	[3]	GEAR-PLANETARY
12.	102-6516	[3]	BUSHING
13.	102-6514	[51]	ROLLER
14.	102-6518	[6]	WASHER
15.	102-6519	[3]	PIN
16.	102-6512	[1]	CARRIER
17.	102-6534	[1]	GEAR-RING
18.	102-6542	[1]	COVER
19.	095-0968	[3]	PLUG
20.	102-6521	[1]	PLATE
21.	102-6545	[1]	KIT-PLATE
22.	102-6520	[1]	GEAR-SUN
23.	102-6522	[1]	GEAR-SUN
24.	102-6523	[1]	GEAR-SUN
25.	102-6502	[1]	CARRIER
26.	102-6503	[3]	GEAR-PLANETARY
27.	093-4391	[6]	WASHER
28.	093-5133	[3]	BEARING
29.	102-6504	[3]	SHAFT
30.	095-7945	[6]	PIN-SPRING
31.	6V-3938 M	[16]	BOLT-HEX HEAD (M10X1.5X20MM)
32.	102-6509	[3]	SHAFT
33.	102-6510	[6]	WASHER
34.	102-6507	[3]	GEAR-PLANETARY
35.	102-6508	[3]	BEARING
36.	8C-8729 M	[16]	BOLT-SOCKET HEAD (M12X1.75X80MM)
37.	102-6506	[1]	CARRIER
38.	3E-8008 M	[3]	BOLT-SOCKET HEAD (M16X2X90MM)
39.	095-0819	[3]	LOCKWASHER-SPRING
40.	102-6535	[1]	SEAL
41.	095-0966	[1]	PLUG-TAPERED
42.	096-7265 M	[12]	BOLT
43.	Z		PLATE AS
	M		METRIC PART
	Z		NOT SERVICED SEPARATELY

Information:

MACHINE ARRANGEMENT

MACHINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Special Instruction

General Welding Procedures {0679, 7000}
General Welding Procedures {0679, 7000}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}
Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Installation of G610 Hardware for Cat® Terrain for Excavators{7605}
Installation of G610 Hardware for Cat^® Terrain for Excavators{7605}

Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat^® and Non-Cat Equipment {4203, 7490}

Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat^® and Non-Cat Equipment {7606}

Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat^® and Non-Cat Products {7600, 7610, 7620}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

Boom And Stick Attachments Reference List
Boom And Stick Attachments Reference List

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

Tool Operating Manual

439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Systems Operation

Service Intervals
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}

Service Magazine

Use Bearing Puller Adapters For Removing Various Size Bearings{6500,6501,6502,6505,6509,6516}
1998/03/09

Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10

An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/21

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Information on A/D/G Coatings for Bolts, Spacers, and Washers {7000, 7553, 7553}
Information on A/D/G Coatings for Bolts, Spacers, and Washers {7000, 7553, 7553}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 312-A :

132-9147 HARNESS GP-IMPLEMENT CONTROL

5I-8250 LAMP GP-FLOOD

112-6734 LIGHTING GP-BOOM

113-6283 LIGHTING GP-BOOM

116-4458 WIRING GP-AUXILIARY CONTROL

102-6433 FINAL DRIVE GP

102-6500 FINAL DRIVE GP

116-6281 SPECIAL AR -CUSTOM LOW GROUND PRESSURE 312-A EXCAVATOR

MACHINE ARRANGEMENT