HYDRAULIC SYSTEM
CYLINDER GPLINES GP-AUXILIARY
HYDRAULIC SYSTEM
CYLINDER GP#SEBC10530050
4I-7629: CYLINDER & SEAL GP
Parts for your 312-A EXCAVATOR:
CATERPILLAR SIS#SEBC10530051
117-6410: CYLINDER & SEAL GP
117-6410 CYLINDER & SEAL GP -CUSTOM
PART OF 3A-8965 BOOM AR-PARALLEL OFFSET
PART OF 3A-8965 BOOM AR-PARALLEL OFFSET
Parts for your 312-A EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
8T-4192 M | [4] | BOLT (M12X1.75X25MM) | ||
125-1545 Y | [2] | CYLINDER GP-BOOM | ||
3B-8489 | [2] | FITTING-GREASE (1/8-27 THD) | ||
5I-4065 Y | [1] | LINES GP-BOOM CYLINDER | ||
1R-6227 | [1] | PIN | ||
095-6824 | [2] | PLATE | ||
093-1433 | [4] | SEAL-LIP (59.85MM ID) | ||
096-0854 | [4] | SEAL-LIP TYPE | ||
099-3600 | [4] | WASHER | ||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBC10530052
117-5679: CYLINDER GP-BLADE
117-5679 CYLINDER GP-BLADE -RH-CUSTOM
120MM (4.72IN) BORE. 159MM (6.3IN) STROKE
PART OF 115-4743 CYLINDER & LINES GP-BLADE
120MM (4.72IN) BORE. 159MM (6.3IN) STROKE
PART OF 115-4743 CYLINDER & LINES GP-BLADE
Parts for your 312-A EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | [1] | CYLINDER | ||
1A. | 5I-3035 | [1] | BEARING-SLEEVE | |
2. | 103-8441 | [1] | RING-RETAINING | |
3. | 103-8442 | [1] | RING | |
4. | 105-7398 | [1] | STOP | |
5. | 5I-3024 M | [1] | LOCKNUT | |
6. | 093-1604 J | [1] | RING | |
7. | 9X-3592 J | [1] | SEAL AS | |
8. | 093-1630 J | [1] | RING | |
9. | 5I-3044 | [1] | PISTON | |
10. | 099-0681 J | [3] | RING-BACKUP | |
11. | 095-1628 J | [2] | SEAL-O-RING (109.6MM ID) | |
12. | 096-8139 | [1] | RING-RETAINING | |
13. | 114-0755 | [1] | BEARING-SLEEVE | |
14. | 093-1484 J | [1] | SEAL-BUFFER | |
15. | 093-1479 J | [1] | SEAL-U-CUP | |
16. | 096-1054 J | [1] | RING-BACKUP | |
17. | 099-0686 | [1] | HEAD | |
18. | 116-3387 J | [1] | SEAL-LIP | |
19. | 132-5915 | [1] | ROD AS | |
19A. | 5I-3063 | [1] | BEARING-SLEEVE | |
20. | 099-0695 | [1] | RING | |
21. | 8T-4241 | [2] | RING-RETAINING (44.8MM ID) | |
22. | 095-1676 J | [1] | SEAL-O-RING (119.4MM ID) | |
AVAILABLE REPAIR KIT(S): | ||||
5I-3047 J | [1] | KIT-SEAL | ||
J | KIT MARKED J INCLUDES PARTS MARKED J | |||
M | METRIC PART |
#SEBC10530053
117-9417: CYLINDER GP-BLADE
117-9417 CYLINDER GP-BLADE -LH-CUSTOM
120MM (4.72IN) BORE. 159MM (6.3IN) STROKE
PART OF 115-4744 CYLINDER & LINES GP-BLADE
120MM (4.72IN) BORE. 159MM (6.3IN) STROKE
PART OF 115-4744 CYLINDER & LINES GP-BLADE
Parts for your 312-A EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | [1] | CYLINDER AS | ||
1A. | 5I-3035 | [1] | BEARING-SLEEVE | |
2. | 103-8441 | [1] | RING-RETAINING | |
3. | 103-8442 | [1] | RING | |
4. | 105-7398 | [1] | STOP | |
5. | 5I-3024 M | [1] | LOCKNUT | |
6. | 093-1604 J | [1] | RING | |
7. | 9X-3592 J | [1] | SEAL AS | |
8. | 093-1630 J | [1] | RING | |
9. | 5I-3044 | [1] | PISTON | |
10. | 099-0681 J | [3] | RING-BACKUP | |
11. | 095-1628 J | [2] | SEAL-O-RING (109.6MM ID) | |
12. | 096-8139 | [1] | RING-RETAINING | |
13. | 114-0755 | [1] | BEARING-SLEEVE | |
14. | 093-1484 J | [1] | SEAL-BUFFER | |
15. | 093-1479 J | [1] | SEAL-U-CUP | |
16. | 096-1054 J | [1] | RING-BACKUP | |
17. | 099-0686 | [1] | HEAD | |
18. | 116-3387 J | [1] | SEAL-LIP | |
19. | 132-5915 | [1] | ROD AS | |
19A. | 5I-3063 | [1] | BEARING-SLEEVE | |
20. | 099-0695 | [1] | RING | |
21. | 8T-4241 | [2] | RING-RETAINING (44.8MM ID) | |
22. | 095-1676 J | [1] | SEAL-O-RING (119.4MM ID) | |
AVAILABLE REPAIR KIT(S): | ||||
5I-3047 J | [1] | KIT-SEAL | ||
J | KIT MARKED J INCLUDES PARTS MARKED J | |||
M | METRIC PART |
#SEBC10530054
8U-4044: CYLINDER GP-BOOM
8U-4044 CYLINDER GP-BOOM
PART OF 3A-8964 BOOM AR-ADJUSTABLE
PART OF 3A-8964 BOOM AR-ADJUSTABLE
Parts for your 312-A EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
3G-0785 | [1] | BALL | ||
8U-1277 | [2] | BEARING | ||
8T-6429 M | [12] | BOLT-SOCKET HEAD | ||
8U-4047 | [1] | CYLINDER AS | ||
5W-2817 | [2] | FITTING-GREASE (M10X1 THD) | ||
8U-4049 | [1] | HEAD | ||
8U-4062 | [1] | KIT-REPAIR | ||
5W-3581 | [1] | PIN | ||
8U-9165 | [1] | PISTON | ||
8U-4060 | [2] | RING | ||
8U-4055 | [3] | RING | ||
8U-4058 | [1] | RING-GUIDE | ||
8U-4056 | [2] | RING-SEAL | ||
8U-4052 | [4] | RING-SNAP | ||
8U-4772 | [1] | RING-WIPER | ||
8U-4048 | [1] | ROD-CYLINDER | ||
5W-2879 | [1] | SCREW | ||
8U-4054 | [1] | SEAL | ||
8U-4053 | [1] | SEAL | ||
8U-4061 | [1] | SEAL-O-RING | ||
8U-4057 | [2] | SEAL-O-RING | ||
8U-4059 | [1] | SEAL-PISTON | ||
8U-4051 | [1] | STOP | ||
M | METRIC PART |
#SEBC10530055
125-1545: CYLINDER GP-BOOM
125-1545 CYLINDER GP-BOOM
110MM (4.33 IN.) BORE X 1015MM (40 IN.) STROKE
PART OF 117-6410, 4I-7628 CYLINDER & SEAL GP
110MM (4.33 IN.) BORE X 1015MM (40 IN.) STROKE
PART OF 117-6410, 4I-7628 CYLINDER & SEAL GP
Parts for your 312-A EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5I-3017 | [1] | CYLINDER AS | |
2. | 5I-3063 | [1] | BEARING-SLEEVE | |
3. | 093-1603 J | [1] | RING | |
4. | 095-1674 J | [1] | SEAL-O-RING (109.4MM ID) | |
5. | 093-1629 J | [1] | RING | |
6. | 125-1550 | [1] | PISTON | |
7. | 6I-6910 J | [1] | RING-SEAL | |
8. | 7I-7513 | [1] | STOP | |
9. | 095-1627 J | [2] | SEAL-O-RING (99.6MM ID) | |
10. | 099-0660 J | [3] | RING-BACKUP | |
11. | 099-0661 | [1] | RING-RETAINING | |
12. | 114-0750 | [1] | BEARING-SLEEVE | |
13. | 096-3469 J | [1] | SEAL-BUFFER | |
14. | 096-3468 J | [1] | SEAL-U-CUP | |
15. | 096-3467 J | [1] | RING-BACKUP | |
16. | 099-0668 | [1] | HEAD | |
17. | 116-3388 J | [1] | SEAL-LIP TYPE | |
18. | 125-1582 | [1] | ROD AS | |
19. | 7Y-3428 | [1] | BEARING-SLEEVE | |
20. | 099-0674 | [1] | RING | |
21. | 9X-7301 J | [1] | SEAL AS | |
22. | 4I-5913 M | [1] | LOCKNUT | |
AVAILABLE REPAIR KIT(S): | ||||
4I-8913 J | [1] | KIT-SEAL | ||
J | PARTS MARKED J INCLUDE KIT(S) MARKED J | |||
M | METRIC PART | |||
R | REMFG PART MAY BE AVAILABLE |
#SEBC10530056
125-1546: CYLINDER GP-STICK
125-1546 CYLINDER GP-STICK
120MM (4.72 IN.) BORE X 1197MM (47 IN.) STROKE
PART OF 4I-7629 CYLINDER & SEAL GP
120MM (4.72 IN.) BORE X 1197MM (47 IN.) STROKE
PART OF 4I-7629 CYLINDER & SEAL GP
Parts for your 312-A EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5I-3032 | [1] | CYLINDER AS | |
2. | 5I-3035 | [1] | BEARING-SLEEVE | |
3. | 103-8442 | [1] | RING | |
4. | 105-7398 | [1] | STOP | |
5. | 5I-3024 M | [1] | LOCKNUT | |
6. | 093-1604 J | [1] | RING | |
7. | 9X-3592 J | [1] | SEAL AS | |
8. | 093-1630 J | [1] | RING | |
9. | 125-1551 | [1] | PISTON | |
10. | 6I-6921 J | [1] | RING-SEAL | |
11. | 5I-3046 | [1] | STOP | |
12. | 095-1628 J | [2] | SEAL-O-RING (109.6MM ID) | |
13. | 099-0681 J | [3] | RING-BACKUP | |
14. | 096-8139 | [1] | RING-RETAINING | |
15. | 114-0755 | [1] | BEARING-SLEEVE | |
16. | 093-1484 J | [1] | SEAL-BUFFER | |
17. | 093-1479 J | [1] | SEAL-U-CUP | |
18. | 096-1054 J | [1] | RING-BACKUP | |
19. | 099-0686 | [1] | HEAD | |
20. | 116-3387 J | [1] | SEAL-LIP | |
21. | 125-1584 | [1] | ROD AS | |
22. | 5I-3035 | [1] | BEARING-SLEEVE | |
23. | 095-1676 J | [1] | SEAL-O-RING (119.4MM ID) | |
24. | 099-0695 | [1] | RING | |
25. | 103-8441 | [1] | RING-RETAINING | |
26. | 8T-4241 | [2] | RING-RETAINING (44.8MM ID) | |
AVAILABLE REPAIR KIT(S): | ||||
5I-3047 J | [1] | KIT-SEAL | ||
J | PARTS MARKED J INCLUDE KIT(S) MARKED J | |||
M | METRIC PART | |||
R | REMFG PART MAY BE AVAILABLE |
#SEBC10530057
116-6304: LINES AR-AUXILIARY HYDRAULIC
116-6304 LINES AR-AUXILIARY HYDRAULIC -CUSTOM
MEDIUM PRESSURE
FOR USE WITH VARIABLE ADJUSTABLE BOOM
MEDIUM PRESSURE
FOR USE WITH VARIABLE ADJUSTABLE BOOM
Parts for your 312-A EXCAVATOR:
CATERPILLAR SIS#SEBC10530058
116-6316: LINES AR-AUXILIARY HYDRAULIC
116-6316 LINES AR-AUXILIARY HYDRAULIC -CUSTOM
MEDIUM PRESSURE
FOR USE WITH PARALLEL OFFSET BOOM
MEDIUM PRESSURE
FOR USE WITH PARALLEL OFFSET BOOM
Parts for your 312-A EXCAVATOR:
CATERPILLAR SIS#SEBC10530059
122-2530: LINES AR-AUXILIARY HYDRAULIC
122-2530 LINES AR-AUXILIARY HYDRAULIC -CUSTOM
LONG STICK
LONG STICK
Parts for your 312-A EXCAVATOR:
CATERPILLAR SISInformation:
HYDRAULIC SYSTEM
CYLINDER GP
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Service Magazine