AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D10R Custom Parts Manual Track-Type Tractor 3KR00001-UP (MACHINE) WORK TOOLS Caterpillar SIS



TRACK-TYPE TRACTOR D10R TRACK-TYPE TRACTOR 3KR
 D10R Custom Parts Manual Track-Type Tractor 3KR00001-UP (MACHINE) SEBC1065 D10R 3KR   (1995)

Parts group D10R:

  For full view, you need register
WORK TOOLS
BLADE GP
BLADE AS-UNIVERSAL
130-7656 BLADE AS-UNIVERSAL
130-7656 BLADE AS-UNIVERSAL
S/N 9GP1-UP
PART OF 132-8799 BLADE AS-UNIVERSAL
BLADE AS-UNIVERSAL
132-8799 BLADE AS-UNIVERSAL
132-8799 BLADE AS-UNIVERSAL
S/N 9GP1-UP
PART OF 134-6736 BLADE AS-UNIVERSAL
BLADE AS-UNIVERSAL
134-6736 BLADE AS-UNIVERSAL
134-6736 BLADE AS-UNIVERSAL
S/N 9GP1-UP
PART OF 134-6734 BULLDOZER AR-UNIVERSAL
BLADE GP-UNIVERSAL
175-0482 BLADE GP-UNIVERSAL
175-0482 BLADE GP-UNIVERSAL
S/N 3KR1-UP
EXTREME SERVICE
GROUND ENGAGING TOOLS (G.E.T.)
EDGE GP-BIT & CUTTING
7T-8713 EDGE GP-BIT & CUTTING
7T-8713 EDGE GP-BIT & CUTTING
S/N 9GP1-UP
PART OF 134-6734 BULLDOZER AR-UNIVERSAL
TOOTH GP-RIPPER
4Z-8944 TOOTH GP-RIPPER
4Z-8944 TOOTH GP-RIPPER
S/N 3KR1-UP
PART OF 4Z-8947 RIPPER GP
RIPPER GP
MODIFICATION AR-RIPPER
135-2919 MODIFICATION AR-RIPPER
135-2919 MODIFICATION AR-RIPPER
S/N 3KR1-UP
MULTI-SHANK RIPPER WITH LONG SHANK
Type 1
MODIFICATION AR-RIPPER
135-2919 MODIFICATION AR-RIPPER
135-2919 MODIFICATION AR-RIPPER
S/N 3KR1-UP
MULTI-SHANK RIPPER WITH LONG SHANK
Type 2
MODIFICATION AR-RIPPER
135-2919 MODIFICATION AR-RIPPER
135-2919 MODIFICATION AR-RIPPER
S/N 3KR1-UP
MULTI-SHANK RIPPER WITH LONG SHANK
Type 3
RIPPER GP
4Z-8947 RIPPER GP
4Z-8947 RIPPER GP
S/N 3KR1-UP
PART OF 135-2919 MODIFICATION AR-RIPPER
WINCH GP
1Q-3662 WINCH AR-TOWING
1Q-3662 WINCH AR-TOWING -CUSTOM
S/N 3KR1-UP
FOR USE WITH 133-9592 COUNTERWEIGHT GP, 126-8924 INSTALLATION AR-WINCH
CANNOT BE USED WITH ANY OTHER REAR ATTACHMENT
PIN GP
PULLER GP-PIN
4Z-8946 PULLER GP-PIN
4Z-8946 PULLER GP-PIN
S/N 3KR1-UP
PART OF 135-2919 MODIFICATION AR-RIPPER

Information:

(For parts list, see above)

Special Instruction
Installation of 10SU (4KP, 6EP) and 10U (4LP, 6FP) Bulldozer{6051, 6053}
Installation of 10SU (4KP, 6EP) and 10U (4LP, 6FP) Bulldozer{6051, 6053}
Installation of 10SU (4KP) and 10U (1SH) Bulldozer{6051, 6053}
Installation of 10SU (4KP) and 10U (1SH) Bulldozer{6051, 6053}
Installation of the 10SU (S/N: 4KP, 6EP) and 10U (S/N: 4LP, 6FP) Bulldozer with Single Tilt Cylinder{6051, 6053}
Installation of the 10SU (S/N: 4KP, 6EP) and 10U (S/N: 4LP, 6FP) Bulldozer with Single Tilt Cylinder{6051, 6053}
Installation of 10SU (S/N: 4KP, 6EP) and 10U (S/N: 4LP, 6FP) Bulldozer with Dual Tilt Cylinder{6051, 6053}
Installation of 10SU (S/N: 4KP, 6EP) and 10U (S/N: 4LP, 6FP) Bulldozer with Dual Tilt Cylinder{6051, 6053}
Technical Information Bulletin
Blade Guard May Interfere With Upper Radiator Guard Hinge
Blade Guard May Interfere With Upper Radiator Guard Hinge
Disassembly and Assembly
Bulldozer - Remove
D10R Track-Type Tractor Machine Systems
Bulldozer - Install
D10R Track-Type Tractor Machine Systems
Service Magazine
New Seals For Head, Rod And Piston In Lift Cylinder Group Reduce Leakage And Blade Drift {5102}
1997/09/01
Spacers May Be Added To Prevent Bearing Walkout{6051,6053}
1997/09/22
New Head, New Piston, And Replacement Seals In Bulldozer Lift Cylinder Reduce Leakage And Blade Drift{5102}
1999/06/07
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Service Magazine
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
Operation and Maintenance Manual
Cutting Edges and End Bits - Inspect/Replace
D10R Track-Type Tractor
Ripper Tip and Shank Protector - Inspect/Replace
D10R Track-Type Tractor
Special Instruction
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Replacing Ripper Adapters And Adapter Noses {6310, 6808, 6810}
Replacing Ripper Adapters And Adapter Noses {6310, 6808, 6810}
Specifications
Cutting Edges and End Bits
D10R Track-Type Tractor Hydraulic System
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
Filter Retainer Pilot Diameter Changed To Better Fit End Caps Of Hydraulic Filters {5068}
1996/10/14
Extended Ripper Shank Protectors Provide Additional Wear Protection{6810,6812}
1997/08/11
Extended Ripper Shank Protectors Provide Additional Wear Protection {6810,6812}
1998/02/16
The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
Operation and Maintenance Manual
Ripper Linkage and Cylinder Bearings - Lubricate
D10R Track-Type Tractor
Ripper Tip and Shank Protector - Inspect/Replace
D10R Track-Type Tractor
Special Instruction
Installation of Service Replacement Ripper Beam Socket Blocks{6310, 6314}
Installation of Service Replacement Ripper Beam Socket Blocks{6310, 6314}
Installation of No. 10 Ripper (S/N: BRT; BEY){6310}
Installation of No. 10 Ripper (S/N: BRT; BEY){6310}
Installation of No. 10 Ripper (S/N: BEY; BRT; 4PP; TMP; TMD; TMM; TMN){6310}
Installation of No. 10 Ripper (S/N: BEY; BRT; 4PP; TMP; TMD; TMM; TMN){6310}
Large Track-Type Tractor Ripper Failure Information and Repair Techniques For Severe Ripping Applications{6310}
Large Track-Type Tractor Ripper Failure Information and Repair Techniques For Severe Ripping Applications{6310}
Compatibility of the Bulldozer Arrangement and the Ripper Arrangement of the D10N, D10R, and D10T{5102, 5104, 6050, 6053, 6078, 6310}
Compatibility of the Bulldozer Arrangement and the Ripper Arrangement of the D10N, D10R, and D10T{5102, 5104, 6050, 6053, 6078, 6310}
Replacing Ripper Adapters And Adapter Noses {6310, 6808, 6810}
Replacing Ripper Adapters And Adapter Noses {6310, 6808, 6810}
Ripper Carriage Re-Work Instructions for Certain D10T Track-Type Tractors {0679, 6310}
Ripper Carriage Re-Work Instructions for Certain D10T Track-Type Tractors {0679, 6310}
Service Letter-NACD
Possible Soft Pockets In Ripper Beam Assembly Of Certain D10R Tractors
Possible Soft Pockets In Ripper Beam Assembly Of Certain D10R Tractors
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Dozer and Ripper Pins{0679, 6314, 7067}
Thermal Spray Procedures for TTT Dozer and Ripper Pins{0679, 6314, 7067}
Rebuilding Ripper Pin Bores {0599, 0677, 0679, 6310, 6325}
Rebuilding Ripper Pin Bores {0599, 0677, 0679, 6310, 6325}
Service Letter-APD
Possible Soft Pockets In Ripper Beam Assembly Of Certain D10R Tractors
Possible Soft Pockets In Ripper Beam Assembly Of Certain D10R Tractors
Disassembly and Assembly
Ripper Control Linkage - Remove
D10R Track-Type Tractor Machine Systems
Ripper Control Linkage - Install
D10R Track-Type Tractor Machine Systems
Service Magazine
Improved Ripper Features {6808,6810,6812}
1997/06/09
Extended Ripper Shank Protectors Provide Additional Wear Protection{6810,6812}
1997/08/11
Extended Ripper Shank Protectors Provide Additional Wear Protection {6810,6812}
1998/02/16
Longer Ripper Valve Mounting Bolts Prevent Loosening {5351}
1999/07/12
A New Ripper Valve Provides Warming Circuit for Cold Weather Applications {5051, 6310}
2001/02/19
A New Pin Puller Control Valve Is Available {5051}
2001/05/28
Washers in Ripper Valve Mounting on D10R Prevent Loosening {6310, 6324}
2003/03/31
A Rework Procedure is Now Available to Improve the Mounting of the Ripper Valve {5351, 6310}
2003/05/26
Correction to Special Instruction, SEHS9918 , "Installation of No. 10 Ripper (S/N: BRT, BEY)" {6310}
2003/12/08
An Improved Ripper Carriage Is Now Available For Certain D10T Track-Type Tractors {0679, 6310}
An Improved Ripper Carriage Is Now Available For Certain D10T Track-Type Tractors {0679, 6310}
Specifications
Winch Mounting
D10R Track-Type Tractor Power Train
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Dozer and Ripper Pins{0679, 6314, 7067}
Thermal Spray Procedures for TTT Dozer and Ripper Pins{0679, 6314, 7067}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Rebuilding Ripper Pin Bores {0599, 0677, 0679, 6310, 6325}
Rebuilding Ripper Pin Bores {0599, 0677, 0679, 6310, 6325}

Truck sale:

 
150,000 USD 
Caterpillar D10R, Construction
- Dozers
PETERSON TRACTOR CO
Caterpillar D10R, Construction
 
Caterpillar D10R, Construction
- Dozers
GREGORY POOLE EQUIPMENT CO.
Caterpillar D10R, Construction
160,000 
Caterpillar D10R, Construction
- Dozers
QUINN COMPANY
Caterpillar D10R, Construction
155,000 
Caterpillar D10R, Construction
- Dozers
CASHMAN EQUIPMENT CO.
CATERPILLAR D10R 1997
 
CATERPILLAR D10R 1997
- TRACK TYPE TRACTORS
QUINN COMPANY
California United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.