POWER TRAIN
CONTROL GP-TRANSMISSION HYDCOOLER GP
DRIVE GP-FINAL
POWER TRAIN
CONTROL GP-TRANSMISSION HYD
#SEBC10740210
108-7011: CONTROL GP-TRANSMISSION HYD
108-7011 CONTROL GP-TRANSMISSION HYD
S/N 1GY1-99999
PART OF 116-4652 TRANSMISSION AR
S/N 1GY1-99999
PART OF 116-4652 TRANSMISSION AR
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 109-4365 Y | [1] | VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL) | |
| 2. | 0S-0509 | [3] | BOLT (3/8-16X0.75-IN) | |
| 3. | 031-0218 | [2] | BOLT-LOCKING (3/8-16X0.5-IN) | |
| 4. | 5K-5120 | [2] | STRIP | |
| 5. | 0T-0065 | [3] | BOLT (3/8-16X3.5-IN) | |
| 6. | 8M-4432 | [4] | SEAL-O-RING (26.57MM ID) | |
| 7. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 8. | 104-6730 | [1] | GASKET | |
| 9. | 104-6729 | [1] | RETAINER | |
| 10. | 2H-3932 | [2] | SEAL-O-RING | |
| 11. | 142-8076 | [1] | WIRING GP-TRANSMISSION (SOLENOID) | |
| 102-8802 | [5] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS AND WEDGE) | ||||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS AND WEDGE) | ||||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (INCLUDES PLUG AS AND WEDGE) | ||||
| 12. | 0S-1619 | [4] | BOLT (3/8-16X3-IN) | |
| 13. | 5M-2894 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 14. | 159-0931 CY | [5] | VALVE GP-MODULATING | |
| 15. | 110-4282 | [1] | CLIP AS-CONNECTING | |
| 16. | 9M-1974 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 1D-4540 | [10] | BOLT (5/16-18X2.75-IN) | |
| 18. | 124-5332 | [1] | ELBOW | |
| 19. | 110-2836 | [2] | SLEEVE | |
| 20. | 144-7871 | [1] | HARNESS AS-SENSOR (TRANSMISSION SPEED) | |
| 21. | 110-4278 | [1] | CLIP AS-CONNECTING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC10740211
163-5641: CONTROL GP-TRANSMISSION HYD
163-5641 CONTROL GP-TRANSMISSION HYD
S/N 8KY1-1757; 8RY1-771
PART OF 180-3430, 180-3431 TRANSMISSION AR
S/N 8KY1-1757; 8RY1-771
PART OF 180-3430, 180-3431 TRANSMISSION AR
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5120 | [2] | STRIP | |
| 2. | 104-6729 | [1] | RETAINER | |
| 3. | 104-6730 | [1] | GASKET | |
| 4. | 109-4365 Y | [1] | VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL) | |
| 5. | 110-2836 | [2] | SLEEVE | |
| 6. | 124-5332 | [1] | ELBOW | |
| 7. | 144-7871 | [1] | HARNESS AS-SENSOR (TRANSMISSION SPEED)(TRANSMISSION SPEED SENSORS) | |
| 8. | 160-8408 Y | [5] | VALVE GP-MODULATING (TORQUE CONVERTER LOCKUP CLUTCH) | |
| 9. | 167-6834 | [1] | HARNESS AS-TRANSMISSION (TRANSMISSION SHIFT SOLENOIDS) | |
| 10. | 031-0218 | [2] | BOLT-LOCKING (3/8-16X0.5-IN) | |
| 11. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 12. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 13. | 0S-1619 | [4] | BOLT (3/8-16X3-IN) | |
| 14. | 0T-0065 | [3] | BOLT (3/8-16X3.5-IN) | |
| 15. | 1D-4540 | [10] | BOLT (5/16-18X2.75-IN) | |
| 16. | 2H-3932 | [2] | SEAL-O-RING | |
| 17. | 5M-2894 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 8M-4432 | [4] | SEAL-O-RING | |
| 19. | 9M-1974 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBC10740212
163-5641: CONTROL GP-TRANSMISSION HYD
163-5641 CONTROL GP-TRANSMISSION HYD
S/N 8KY1758-UP; 8RY772-UP
PART OF 180-3430, 180-3431 TRANSMISSION AR
S/N 8KY1758-UP; 8RY772-UP
PART OF 180-3430, 180-3431 TRANSMISSION AR
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5120 | [2] | STRIP | |
| 2. | 104-6729 | [1] | RETAINER | |
| 3. | 104-6730 | [1] | GASKET | |
| 4. | 109-4365 Y | [1] | VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL) | |
| 5. | 110-2836 | [2] | SLEEVE | |
| 6. | 124-5332 | [1] | ELBOW | |
| 7. | 144-7871 | [1] | HARNESS AS-SENSOR (TRANSMISSION SPEED)(TRANSMISSION SPEED SENSORS) | |
| 8. | 216-5338 CY | [5] | VALVE GP-MODULATING (24-VOLT)(TORQUE CONVERTER LOCKUP CLUTCH) | |
| 9. | 167-6834 | [1] | HARNESS AS-TRANSMISSION (TRANSMISSION SHIFT SOLENOIDS) | |
| 10. | 031-0218 | [2] | BOLT-LOCKING (3/8-16X0.5-IN) | |
| 11. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 12. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 13. | 0S-1619 | [4] | BOLT (3/8-16X3-IN) | |
| 14. | 0T-0065 | [3] | BOLT (3/8-16X3.5-IN) | |
| 15. | 1D-4540 | [10] | BOLT (5/16-18X2.75-IN) | |
| 16. | 2H-3932 | [2] | SEAL-O-RING | |
| 17. | 5M-2894 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 8M-4432 | [4] | SEAL-O-RING | |
| 19. | 9M-1974 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC10740213
149-8917: COOLER AR-POWER TRAIN OIL
149-8917 COOLER AR-POWER TRAIN OIL -CUSTOM
S/N 2YN1-UP; 4MN1-UP; 5LN1-UP; 8LN1-UP; 9PN1-UP; DMP1-UP
S/N 2YN1-UP; 4MN1-UP; 5LN1-UP; 8LN1-UP; 9PN1-UP; DMP1-UP
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3V-9244 | [4] | WASHER (16.5X50X5-MM THK) | |
| 2. | 9B-7237 | [6] | BOLT (3/8-16X1.25-IN) | |
| 3. | 7V-8532 | [2] | SPACER | |
| 4. | 112-1646 I | [1] | HOSE AS | |
| 5. | 118-6633 | [1] | CORE AS-HYDRAULIC OIL COOLER | |
| 6. | 130-1433 | [2] | SPACER (11X25X17-MM THK) | |
| 7. | 150-7197 I | [1] | HOSE AS | |
| 8. | 150-7198 I | [1] | HOSE AS | |
| 9. | 150-7199 I | [1] | HOSE AS | |
| 10. | 152-6440 | [1] | PLATE AS | |
| 1F-0750 | [8] | NUT-WELD (3/8-16-THD) | ||
| 11. | 152-6441 | [1] | PLATE AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 12. | 152-6442 | [1] | GUARD AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 8N-4406 | [1] | BLOCK | ||
| 13. | 152-6443 | [1] | PLATE AS | |
| 3Y-7829 | [1] | BOSS (3/8-16-THD) | ||
| 14. | 152-6444 | [1] | PLATE AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 15. | 152-6445 | [1] | PLATE AS | |
| 3W-2764 | [1] | BOSS | ||
| 16. | 100-4336 | [4] | CLIP | |
| 17. | 1P-4578 | [6] | FLANGE-HALF | |
| 18. | 1S-0994 | [2] | CLIP | |
| 19. | 2M-9780 | [2] | SEAL-O-RING | |
| 20. | 3K-0360 | [2] | SEAL-O-RING | |
| 21. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 22. | 5P-1075 | [13] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 23. | 5S-7379 | [1] | BOLT (3/8-16X0.875-IN) | |
| 24. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 25. | 6V-8398 | [4] | SEAL-O-RING | |
| 26. | 6V-8625 | [1] | ELBOW | |
| 27. | 6V-8638 | [2] | CONNECTOR | |
| 28. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 29. | 6V-9002 | [1] | ELBOW | |
| 30. | 7X-0288 | [1] | BOLT (3/8-16X1.625-IN) | |
| 31. | 7X-0313 | [8] | BOLT (7/16-14X2.75-IN) | |
| 32. | 7X-0345 | [4] | BOLT (5/8-11X1.75-IN) | |
| 33. | 8M-4986 | [6] | SEAL-O-RING | |
| 34. | 8T-2501 | [1] | BOLT (3/8-16X2-IN) | |
| 35. | 8T-2502 | [3] | BOLT (3/8-16X1.125-IN) | |
| 36. | 8T-4122 | [16] | WASHER-HARD (17X32X3.5-MM THK) | |
| 37. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 38. | 8T-5360 | [12] | WASHER (12X22.5X2.5-MM THK) | |
| 39. | 8T-8916 | [4] | BOLT (7/16-14X1.5-IN) | |
| *****STANDARD REMOVALS***** | ||||
| 136-4844 P | [1] | BAFFLE AS (BOTTOM) | ||
| 119-7914 S | [1] | GUARD AS | ||
| 112-1646 LI | [1] | HOSE AS | ||
| 110-6105 Q | [1] | PLATE AS-RETAINER | ||
| 3W-2464 L | [1] | TUBE AS | ||
| 0S-1591 T | [1] | BOLT (3/8-16X1.5-IN) | ||
| 4L-6454 P | [3] | BOLT (3/8-16X1-IN) | ||
| 5S-7379 N | [2] | BOLT (3/8-16X0.875-IN) | ||
| 8C-6877 L | [8] | BOLT (7/16-14X1.75-IN) | ||
| 8T-8916 L | [4] | BOLT (7/16-14X1.5-IN) | ||
| 8T-9393 S | [4] | BOLT (5/8-11X1.5-IN) | ||
| 1P-4578 L | [2] | FLANGE-HALF | ||
| 5P-7085 L | [2] | SEAL-RECTANGULAR | ||
| 8M-4986 L | [2] | SEAL-O-RING | ||
| 3V-9244 S | [4] | WASHER (16.5X50X5-MM THK) | ||
| 5M-2894 T | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-1075 P | [3] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 8T-4122 S | [8] | WASHER-HARD (17X32X3.5-MM THK) | ||
| 8T-4896 N | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 8T-5360 L | [12] | WASHER (12X22.5X2.5-MM THK) | ||
| *****ATTACHMENT REMOVALS***** | ||||
| 136-4844 V | [1] | BAFFLE AS (BOTTOM) | ||
| 119-7915 W | [1] | GUARD AS | ||
| 4L-6454 V | [3] | BOLT (3/8-16X1-IN) | ||
| 5S-7379 U | [1] | BOLT (3/8-16X0.875-IN) | ||
| 7X-0345 W | [4] | BOLT (5/8-11X1.75-IN) | ||
| 5P-1075 U | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 8T-4122 W | [8] | WASHER-HARD (17X32X3.5-MM THK) | ||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| L | PART OF STANDARD LINES GP-POWERTRAIN OIL | |||
| N | PART OF STANDARD BAR GP-EQUALIZER | |||
| P | PART OF ATTACHMENT RADIATOR GP | |||
| Q | PART OF STANDARD RADIATOR GP | |||
| S | PART OF ATTACHMENT GUARD GP-RADIATOR | |||
| T | PART OF STANDARD FASTENER GP-OIL PAN | |||
| U | PART OF ATTACHMENT LINES GP-OIL COOLER | |||
| V | PART OF ATTACHMENT RADIATOR GP | |||
| W | PART OF ATTACHMENT GUARD GP-RADIATOR BOTTOM | |||
#SEBC10740214
7N-2731: COOLER GP-TRANSMISSION OIL
7N-2731 COOLER GP-TRANSMISSION OIL
S/N 6NC1-UP; 08Z93150-99999
PART OF 108-1078, 8Q-1761, 8Q-1762, 8Q-1763 ENGINE AR
S/N 6NC1-UP; 08Z93150-99999
PART OF 108-1078, 8Q-1761, 8Q-1762, 8Q-1763 ENGINE AR
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-5537 | [1] | CORE AS (TRANSMISSION OIL) | |
| 2. | 7B-3235 | [3] | BOLT (1/2-13X1.375-IN) | |
| 3. | 1B-2886 | [3] | BOLT (1/2-13X3.75-IN) | |
| 4. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5. | 2S-0795 | [2] | GASKET | |
| 6. | 1A-1460 | [2] | BOLT (1/2-13X2-IN) | |
| 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 7. | 8S-4304 | [1] | BONNET-XMSN OIL COOLER (REAR) | |
| 8. | 0S-1595 | [4] | BOLT (1/2-13X1.25-IN) | |
| 9. | 8M-9307 | [1] | PLUG (OIL COOLER) | |
| 6F-7062 | [1] | WASHER (12.7X19.05X1.83-MM THK) | ||
| 10. | 1W-4855 | [1] | BRACKET-OIL COOLER (REAR MOUNTING) | |
| R | REMFG PART MAY BE AVAILABLE | |||
#SEBC10740215
1Q-2274: DRIVE GP-FINAL
1Q-2274 DRIVE GP-FINAL
S/N 8LN418-505; 9PN418-1189
PART OF 134-2922 GUARD AR-FINAL DRIVE
S/N 8LN418-505; 9PN418-1189
PART OF 134-2922 GUARD AR-FINAL DRIVE
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-6913 | [26] | WASHER-HARD (24X41.5X4-MM THK) | |
| 2. | 6V-0329 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 3. | 6V-0330 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 4. | 9G-9181 | [1] | RETAINER | |
| 5. | 8G-8844 | [1] | RING-LOCK | |
| 6. | 9G-8639 | [1] | GEAR-RING (94-TEETH) | |
| 7. | 8T-9399 | [33] | BOLT (3/4-10X2.25-IN) | |
| 8. | 8T-4994 | [33] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 9. | 9G-8638 | [3] | GEAR-PLANETARY (40-TEETH) | |
| 10. | 1B-3978 | [6] | CUP-BEARING (TAPERED ROLLER) | |
| 11. | 1B-3980 | [6] | CONE-BEARING (TAPERED ROLLER) | |
| 12. | 9G-9183 | [3] | SHAFT | |
| 13. | 7X-0346 | [3] | BOLT (5/8-11X2-IN) | |
| 14. | 8T-8919 | [2] | BOLT (1/2-13X1.75-IN) | |
| 15. | 2P-3696 | [3] | RETAINER | |
| 16. | 2B-0947 | [10] | BOLT (1/2-13X2.25-IN) | |
| 17. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 18. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 8G-8845 | [1] | COVER | |
| 20. | 2R-0098 | [1] | SEAL-O-RING | |
| 21. | 8E-9041 Y | [1] | SEGMENT GP-SPROCKET | |
| 22. | 1P-9005 | [1] | SEAL-O-RING | |
| 23. | 2S-4078 | [1] | SEAL-O-RING | |
| 24. | 6V-0439 | [1] | PLUG-MAGNETIC | |
| 25. | 9G-9175 | [1] | CARRIER | |
| 26. | 9S-4185 | [1] | PLUG | |
| 27. | 3K-0360 | [1] | SEAL-O-RING | |
| 28. | 9H-3360 | [1] | SEAL-O-RING | |
| 29. | 8E-2748 | [1] | HUB-REACTION | |
| 30. | 9X-7671 | [1] | SEAL-LIP TYPE | |
| 31. | 6V-0327 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 32. | 6V-0328 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 33. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 34. | 1D-4628 | [26] | BOLT (7/8-9X3.25-IN) | |
| 35. | 1Q-2266 | [1] | HUB AS | |
| 36. | 6Y-5024 | [1] | GUARD | |
| 37. | 6Y-0860 | [1] | SEAL GP-DUO-CONE | |
| 1M-9011 | [2] | RING-TORIC | ||
| 38. | 1Q-2267 | [1] | SPINDLE AS | |
| 39. | 1Q-2252 | [1] | GUARD-CONE SEAL | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBC10740216
1Q-2275: DRIVE GP-FINAL
1Q-2275 DRIVE GP-FINAL
S/N 2YN1-UP; 3ZN1-UP; 4MN1-UP; 5LN1-UP; 6JN1-UP; 7KN1-UP; 9ZS1-UP; 1RW1-UP
PART OF 134-2921 GUARD AR-FINAL DRIVE, 129-2162 WASTE HANDLING AR
S/N 2YN1-UP; 3ZN1-UP; 4MN1-UP; 5LN1-UP; 6JN1-UP; 7KN1-UP; 9ZS1-UP; 1RW1-UP
PART OF 134-2921 GUARD AR-FINAL DRIVE, 129-2162 WASTE HANDLING AR
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-6913 | [26] | WASHER-HARD (24X41.5X4-MM THK) | |
| 2. | 6V-0329 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 3. | 6V-0330 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 4. | 9G-9181 | [1] | RETAINER | |
| 5. | 8G-8844 | [1] | RING-LOCK | |
| 6. | 9G-8639 | [1] | GEAR-RING (94-TEETH)(94 TEETH) | |
| 7. | 8T-9399 | [33] | BOLT (3/4-10X2.25-IN) | |
| 8. | 8T-4994 | [33] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 9. | 9G-8638 | [3] | GEAR-PLANETARY (40-TEETH)(40 TEETH) | |
| 10. | 1B-3978 | [6] | CUP-BEARING (TAPERED ROLLER) | |
| 11. | 1B-3980 | [6] | CONE-BEARING (TAPERED ROLLER) | |
| 12. | 9G-9183 | [3] | SHAFT | |
| 13. | 7X-0346 | [3] | BOLT (5/8-11X2-IN) | |
| 14. | 8T-8919 | [2] | BOLT (1/2-13X1.75-IN) | |
| 15. | 2P-3696 | [3] | RETAINER | |
| 16. | 2B-0947 | [10] | BOLT (1/2-13X2.25-IN) | |
| 17. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 18. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 8G-8845 | [1] | COVER | |
| 20. | 2R-0098 | [1] | SEAL-O-RING | |
| 21. | 8E-9041 Y | [1] | SEGMENT GP-SPROCKET | |
| 22. | 1P-9005 | [1] | SEAL-O-RING | |
| 23. | 2S-4078 | [1] | SEAL-O-RING | |
| 24. | 6V-0439 | [1] | PLUG-MAGNETIC | |
| 25. | 9G-9175 | [1] | CARRIER | |
| 26. | 9S-4185 | [1] | PLUG | |
| 27. | 3K-0360 | [1] | SEAL-O-RING | |
| 28. | 9H-3360 | [1] | SEAL-O-RING | |
| 29. | 8E-2748 | [1] | HUB-REACTION | |
| 30. | 9X-7671 | [1] | SEAL-LIP TYPE | |
| 31. | 6V-0327 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 32. | 6V-0328 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 33. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 34. | 1D-4628 | [26] | BOLT (7/8-9X3.25-IN) | |
| 35. | 1Q-2266 | [1] | HUB AS | |
| 36. | 6Y-5024 | [1] | GUARD | |
| 37. | 6Y-0860 | [1] | SEAL GP-DUO-CONE | |
| 38. | 1M-9011 | [2] | RING-TORIC | |
| 39. | 1Q-2265 | [1] | SPINDLE AS | |
| 40. | 1Q-2252 | [1] | GUARD-CONE SEAL | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBC10740217
1Q-4303: DRIVE GP-FINAL
1Q-4303 DRIVE GP-FINAL -CUSTOM
S/N 8LN1-UP; 9PN1-UP
LGP
PART OF 122-6838 GUARD AR-FINAL DRIVE
S/N 8LN1-UP; 9PN1-UP
LGP
PART OF 122-6838 GUARD AR-FINAL DRIVE
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1Q-2266 | [1] | HUB AS | |
| 6Y-5024 | [1] | GUARD | ||
| 2. | 6V-0329 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 3. | 6V-0330 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 4. | 9G-9181 | [1] | RETAINER | |
| 5. | 8G-8844 | [1] | RING-LOCK | |
| 6. | 9G-8639 | [1] | GEAR-RING (94-TEETH) | |
| 7. | 8T-9399 | [33] | BOLT (3/4-10X2.25-IN) | |
| 8. | 8T-4994 | [33] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 9. | 9G-8638 | [3] | GEAR-PLANETARY (40-TEETH) | |
| 10. | 1B-3978 | [6] | CUP-BEARING (TAPERED ROLLER) | |
| 11. | 1B-3980 | [6] | CONE-BEARING (TAPERED ROLLER) | |
| 12. | 9G-9183 | [3] | SHAFT | |
| 13. | 7X-0346 | [3] | BOLT (5/8-11X2-IN) | |
| 14. | 109-7397 | [1] | SPINDLE AS | |
| 109-7399 | [1] | GUARD | ||
| 15. | 2P-3696 | [3] | RETAINER | |
| 16. | 2B-0947 | [10] | BOLT (1/2-13X2.25-IN) | |
| 17. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 18. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 8G-8845 | [1] | COVER | |
| 20. | 2R-0098 | [1] | SEAL-O-RING | |
| 21. | 8E-9041 Y | [1] | SEGMENT GP-SPROCKET | |
| 22. | 1P-9005 | [1] | SEAL-O-RING | |
| 23. | 2S-4078 | [1] | SEAL-O-RING | |
| 24. | 6V-0439 | [1] | PLUG-MAGNETIC | |
| 25. | 9G-9175 | [1] | CARRIER | |
| 26. | 9S-4185 | [1] | PLUG | |
| 27. | 3K-0360 | [1] | SEAL-O-RING | |
| 28. | 9H-3360 | [1] | SEAL-O-RING | |
| 29. | 8E-2748 | [1] | HUB-REACTION | |
| 30. | 9X-7671 | [1] | SEAL-LIP TYPE | |
| 31. | 6V-0327 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 32. | 6V-0328 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 33. | 6Y-0860 | [1] | SEAL GP-DUO-CONE | |
| 1M-9011 | [2] | RING-TORIC | ||
| 34. | 1D-4628 | [26] | BOLT (7/8-9X3.25-IN) | |
| 35. | 8C-6913 | [26] | WASHER-HARD (24X41.5X4-MM THK) | |
| 36. | 8T-8919 | [2] | BOLT (1/2-13X1.75-IN) | |
| 37. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 38. | 109-7400 | [2] | PLATE | |
| 39. | 109-7398 | [1] | SEAL | |
| 40. | 1L-0509 | [10] | BOLT (3/8-16X0.74-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBC10740218
1Q-4304: DRIVE GP-FINAL
1Q-4304 DRIVE GP-FINAL -CUSTOM
S/N 2YN1-UP; 3ZN1-UP; 4MN1-UP; 5LN1-UP; 6JN1-UP; 7KN1-UP
PART OF 122-6839 GUARD AR-FINAL DRIVE
S/N 2YN1-UP; 3ZN1-UP; 4MN1-UP; 5LN1-UP; 6JN1-UP; 7KN1-UP
PART OF 122-6839 GUARD AR-FINAL DRIVE
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1Q-2266 | [1] | HUB AS | |
| 6Y-5024 | [1] | GUARD | ||
| 2. | 6V-0329 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 3. | 6V-0330 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 4. | 9G-9181 | [1] | RETAINER | |
| 5. | 8G-8844 | [1] | RING-LOCK | |
| 6. | 9G-8639 | [1] | GEAR-RING (94-TEETH) | |
| 7. | 8T-9399 | [33] | BOLT (3/4-10X2.25-IN) | |
| 8. | 8T-4994 | [33] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 9. | 9G-8638 | [3] | GEAR-PLANETARY (40-TEETH) | |
| 10. | 1B-3978 | [6] | CUP-BEARING (TAPERED ROLLER) | |
| 11. | 1B-3980 | [6] | CONE-BEARING (TAPERED ROLLER) | |
| 12. | 9G-9183 | [3] | SHAFT | |
| 13. | 7X-0346 | [3] | BOLT (5/8-11X2-IN) | |
| 14. | 109-7396 | [1] | SPINDLE AS | |
| 109-7399 | [1] | GUARD | ||
| 15. | 2P-3696 | [3] | RETAINER | |
| 16. | 2B-0947 | [10] | BOLT (1/2-13X2.25-IN) | |
| 17. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 18. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 8G-8845 | [1] | COVER | |
| 20. | 2R-0098 | [1] | SEAL-O-RING | |
| 21. | 8E-9041 Y | [1] | SEGMENT GP-SPROCKET | |
| 22. | 1P-9005 | [1] | SEAL-O-RING | |
| 23. | 2S-4078 | [1] | SEAL-O-RING | |
| 24. | 6V-0439 | [1] | PLUG-MAGNETIC | |
| 25. | 9G-9175 | [1] | CARRIER | |
| 26. | 9S-4185 | [1] | PLUG | |
| 27. | 3K-0360 | [1] | SEAL-O-RING | |
| 28. | 9H-3360 | [1] | SEAL-O-RING | |
| 29. | 8E-2748 | [1] | HUB-REACTION | |
| 30. | 9X-7671 | [1] | SEAL-LIP TYPE | |
| 31. | 6V-0327 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 32. | 6V-0328 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 33. | 6Y-0860 | [1] | SEAL GP-DUO-CONE | |
| 1M-9011 | [2] | RING-TORIC | ||
| 34. | 1D-4628 | [26] | BOLT (7/8-9X3.25-IN) | |
| 35. | 8C-6913 | [26] | WASHER-HARD (24X41.5X4-MM THK) | |
| 36. | 8T-8919 | [2] | BOLT (1/2-13X1.75-IN) | |
| 37. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 38. | 109-7400 | [2] | PLATE | |
| 39. | 109-7398 | [1] | SEAL | |
| 40. | 1L-0509 | [10] | BOLT (3/8-16X0.74-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBC10740219
3W-6494: DRIVE GP-FINAL
3W-6494 DRIVE GP-FINAL
S/N 5LN1-UP
DOES NOT INCLUDE MOUNTING HARDWARE AND SPROCKET SEGMENTS
FIELD REPLACEMENT FOR @@@@@ 9G-7365@@@@@
S/N 5LN1-UP
DOES NOT INCLUDE MOUNTING HARDWARE AND SPROCKET SEGMENTS
FIELD REPLACEMENT FOR @@@@@ 9G-7365@@@@@
For full view, you need register
Parts for your D6R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-9180 | [1] | HUB-SPROCKET | |
| 2. | 6V-0329 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 3. | 6V-0330 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 4. | 9G-9181 | [1] | RETAINER | |
| 5. | 456-7041 | [1] | RING | |
| 6. | 461-9930 | [1] | GEAR-RING (94-TEETH) | |
| 7. | 8T-9399 | [33] | BOLT (3/4-10X2.25-IN) | |
| 8. | 8T-4994 C | [33] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 9. | 9G-8638 | [3] | GEAR-PLANETARY (40-TEETH) | |
| 11. | 343-6237 | [6] | BEARING | |
| 12. | 333-9410 | [3] | SHAFT | |
| 13. | 7X-0346 C | [3] | BOLT (5/8-11X2-IN) | |
| 14. | 9G-9182 | [1] | SPINDLE | |
| 15. | 2P-3696 | [3] | RETAINER | |
| 16. | 467-4196 | [10] | BOLT-SPECIAL (1/2-13X1-IN) | |
| 17. | 4L-6454 C | [3] | BOLT (3/8-16X1-IN) | |
| 18. | 8T-4896 C | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 8G-8845 | [1] | COVER | |
| 20. | 1P-9005 | [1] | SEAL-O-RING | |
| 21. | 2S-4078 | [1] | SEAL-O-RING | |
| 22. | 6V-0439 | [1] | PLUG-MAGNETIC (FINAL DRIVE, OIL FILL) | |
| 23. | 9G-9175 | [1] | CARRIER | |
| 24. | 9S-4185 | [1] | PLUG (FINAL DRIVE, OIL DRAIN) | |
| 25. | 3K-0360 | [1] | SEAL-O-RING | |
| 26. | 9H-3360 | [1] | SEAL-O-RING | |
| 27. | 8E-2748 | [1] | HUB-REACTION | |
| 28. | 419-4175 C | [1] | SEAL-LIP TYPE | |
| 29. | 6V-0327 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 30. | 6V-0328 | [1] | CONE-BEARING (TAPERED ROLLER) | |
| 31. | 6Y-0859 C | [1] | SEAL GP-DUO-CONE | |
| 31A. | 1M-9011 | [2] | RING-TORIC | |
| 32. | 1H-9696 | [3] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
