AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

SUPPLEMENT FOR TRUCKS WITH 3Z-5644 OR 3Z-5645 MODIFICATIONS 1HK00001-UP (MACHINE) FRAME AND BODY Caterpillar SIS



ARTICULATED TRUCK D25D ARTICULATED TRUCK 1HK
 SUPPLEMENT FOR TRUCKS WITH 3Z-5644 OR 3Z-5645 MODIFICATIONS 1HK00001-UP (MACHINE) SEBC1078 D25D 1HK   (1989)

Parts group D25D:

  For full view, you need register
FRAME AND BODY
GUARD GP
HINGED RADIATOR GUARD
3Z-5644 HINGED RADIATOR GUARD
CP-3Z5644 HINGED RADIATOR GUARD
SHROUD MODIFICATION
114-9164 SHROUD MODIFICATION
CP-1149164 Shroud Modification
BRACKET AS
115-0719 BRACKET AS
CP-1150719 Bracket as
PLATE
115-0720 PLATE
CP-1150720 Plate
GUSSET
115-0721 GUSSET
CP-1150721 Gusset
CHANNEL
115-0722 CHANNEL
CP-1150722 Channel
BLOCK
115-0723 BLOCK
1150723 Block
HINGE
116-3804 HINGE
CP-1163804 Hinge

Information:

(For parts list, see above)

Special Instruction
Installation of Battery Storage Area Underside Covers{7257}
Installation of Battery Storage Area Underside Covers{7257}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Magazine
Battery Tray Repositioned For Better Clearance{1402,7250,7257}
1990/01/08
Maintenance Free Batteries{1401}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
New Battery Tray Increases Clearance For Hose Assemblies and Governor Cable{7257}
1990/11/26
New Covers On The Underside Of The Battery Storage Area Prevents Dirt From Entering {7257}
1993/01/25
Special Instruction
Field Installation of Exhaust Heated Body Arrangement{7258}
Field Installation of Exhaust Heated Body Arrangement{7258}
Technical Information Bulletin
New Locking Nuts Are Required To Secure The Spherical Joint For The Exhaust Heated Body
New Locking Nuts Are Required To Secure The Spherical Joint For The Exhaust Heated Body
Disassembly and Assembly
Tractor And Body
D25D,D30D AND D350D ARTICULATED DUMP TRUCKS VEHICLE SYSTEMS
Service Magazine
Dump Body Pivot Pin Retention Improved{7258}
1991/09/09
Improved Spherical Joint Resists Corrosion And Exhaust Leaks{1061,1088,7258}
1992/09/07
Shims Used To Provide Clearance Between Pin Retainers And Truck Body{7258,7250}
1993/05/10
Parts Service Block Replaces Nuts To Provide Better Bolt Retention For The Spillplate Assembly In The Body Group {7258}
1997/01/27
Plate Assembly In Exhaust Heated Body Elbow Group Has Longer Slots To Provide Better Clamping On Spherical Joint {1061}
1997/02/03
Correct Positioning Of Shims On Dump Body Installation {7258}
1998/11/23
New Dump Body Rib Detail Prevents Cracking{7258}
1998/12/28
Procedure to Prevent Indexing of the Clamp on the Heated Body Exhaust Arrangement {1061, 7258}
2000/11/06
Seals are Available for the Spherical Joint on the Exhaust Heated Body Arrangement {1061, 7258}
2001/03/05
Improper Methods of Cleaning the Body Can Damage the Hoist Cylinders {5102, 7250, 7258}
2004/02/02
Disassembly and Assembly
Radiator And Guard
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Service Letter-NACD
Product Support Program For Reinforcing The Tractor Frame In The Area Of The Suspension Frame Pivot On Certain D25D, D30D, D40D, D350D, AND D400D Articulated Trucks
Product Support Program For Reinforcing The Tractor Frame In The Area Of The Suspension Frame Pivot On Certain D25D, D30D, D40D, D350D, AND D400D Articulated Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check New Front Frames To Insure Retainer "Keep" Plates Are Installed{7051,7057,7072,7073}
1991/01/28
Improved Hitch Bushing Relieves Excessive Grease Pressure; New Hitch Seal Must Be Used For Reinforced Frames{7113,7555}
1991/09/09
New Lower Brackets For Hoist Cylinder; Rear Frame Mounts Strengthened{5103}
1991/09/30
New Hitch Pin Arrangement Provides Better Pin Retention{7057,7050}
1993/06/21
New Torque Specification On Front Suspension Frames{7050,7200}
1993/08/23
Knocking Noise In Front Suspension Frame Group Can Be Eliminated With Shims {7200,7050}
1994/01/17
New Hitch Seal And Retaining Ring Used In Rear Frame Groups Reduces Hitch Face Wear{7051}
1994/09/26
Procedure For Aligning Front Suspension Frame Group With The Output Transfer Gearbox {7200}
1997/03/31
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Disassembly and Assembly
Fender
D25D,D30D AND D350D ARTICULATED DUMP TRUCKS VEHICLE SYSTEMS
Service Magazine
Raised Rear Step And Mud Flaps Provide More Clearance On Articulated Trucks {7254,4220}
1997/06/30
Check New Front Frames To Insure Retainer "Keep" Plates Are Installed{7051,7057,7072,7073}
1991/01/28
New Lower Brackets For Hoist Cylinder; Rear Frame Mounts Strengthened{5103}
1991/09/30
Sleeves Available For Rebuilding Tractor Oscillating Hitch Pin Bores{7057,7066}
1993/05/10
New Hitch Pin Arrangement Provides Better Pin Retention{7057,7050}
1993/06/21
New Torque Specification On Front Suspension Frames{7050,7200}
1993/08/23
Knocking Noise In Front Suspension Frame Group Can Be Eliminated With Shims {7200,7050}
1994/01/17
New Hitch Seal And Retaining Ring Used In Rear Frame Groups Reduces Hitch Face Wear{7051}
1994/09/26
Procedure For Aligning Front Suspension Frame Group With The Output Transfer Gearbox {7200}
1997/03/31
Technical Information Bulletin
3306 Engine Oil Pan Plate Leaks
3306 Engine Oil Pan Plate Leaks
Disassembly and Assembly
Radiator And Guard
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Oil Pan Plate
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Service Magazine
Rear Transmission Guard Has New Hose Support Assembly Over Hitch{5057}
1991/01/28
New Brake Guards Provide Better Access To Brake Actuators{4262,7150,7166}
1992/09/07
Improved Handrail Assemblies Used{7256,7250}
1992/09/14
Raised Rear Step And Mud Flaps Provide More Clearance On Articulated Trucks {7254,4220}
1997/06/30
Special Instruction
Articulated Truck - Hitch Salvage{7113, 7114}
Articulated Truck - Hitch Salvage{7113, 7114}
Service Letter-NACD
Retaining Plates Need To Be Installed Below The Hitch Pins On Certain Articulated Dump Trucks, Former Hitch Pins Need To Be Removed From Parts Stock
Retaining Plates Need To Be Installed Below The Hitch Pins On Certain Articulated Dump Trucks, Former Hitch Pins Need To Be Removed From Parts Stock
Oscillating Hitch Studs Need To Be Replaced On Certain D25D, D30D, D350E, And D400E Articulated Trucks
Oscillating Hitch Studs Need To Be Replaced On Certain D25D, D30D, D350E, And D400E Articulated Trucks
Service Letter-Australia
Retaining Plates Need To Be Installed Below The Hitch Pins On Certain Articulated Dump Trucks, Former Hitch Pins Need To Be Removed From Parts Stock
Retaining Plates Need To Be Installed Below The Hitch Pins On Certain Articulated Dump Trucks, Former Hitch Pins Need To Be Removed From Parts Stock
Service Letter-CFEL
Service Letter-CSARL
Oscillating Hitch Studs Need To Be Replaced On Certain D25D, D30D, D350E, And D400E Articulated Trucks
Oscillating Hitch Studs Need To Be Replaced On Certain D25D, D30D, D350E, And D400E Articulated Trucks
Service Letter-Americas
Retaining Plates Need To Be Installed Below The Hitch Pins On Certain Articulated Dump Trucks, Former Hitch Pins Need To Be Removed From Parts Stock
Retaining Plates Need To Be Installed Below The Hitch Pins On Certain Articulated Dump Trucks, Former Hitch Pins Need To Be Removed From Parts Stock
Specifications
Hitch Drive Shaft Group (7U3950) and Transfer Gearbox Group (7U6050)
ARTICULATED TRUCK POWER TRAIN
Hitch Drive Shaft Group (7U4803)
ARTICULATED TRUCK POWER TRAIN
Hitch Drive Shaft Group (7U7435)
ARTICULATED TRUCK POWER TRAIN
Hitch Drive Shaft Groups (7U7451 and 7U7320) and Transfer Gearbox Groups (7U7448 and 7U7250)
ARTICULATED TRUCK POWER TRAIN
Service Letter-China
Retaining Plates Need To Be Installed Below The Hitch Pins On Certain Articulated Dump Trucks, Former Hitch Pins Need To Be Removed From Parts Stock
Retaining Plates Need To Be Installed Below The Hitch Pins On Certain Articulated Dump Trucks, Former Hitch Pins Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Thermal Spray Procedures for ADT Hitch{0679, 7113}
Thermal Spray Procedures for ADT Hitch{0679, 7113}
Service Letter-APD
Retaining Plates Need To Be Installed Below The Hitch Pins On Certain Articulated Dump Trucks, Former Hitch Pins Need To Be Removed From Parts Stock
Retaining Plates Need To Be Installed Below The Hitch Pins On Certain Articulated Dump Trucks, Former Hitch Pins Need To Be Removed From Parts Stock
Disassembly and Assembly
Hitch Group
D25D,D30D AND D350D ARTICULATED DUMP TRUCKS VEHICLE SYSTEMS
Service Magazine
Gaiter (Protector) Available For "Over-Hitch" Hoses{7167,5057}
1989/12/25
Rear Transmission Guard Has New Hose Support Assembly Over Hitch{5057}
1991/01/28
Angled Grease Fitting In Lower Hitch Pin Gives Easier Access{7116}
1991/04/08
Improved Hitch Bushing Relieves Excessive Grease Pressure; New Hitch Seal Must Be Used For Reinforced Frames{7113,7555}
1991/09/09
New Sealed Bearings Eliminate Hitch Drive Oil Changes; New End Plate Used{7113,7551}
1991/09/09
New Nylon Bushing And Seal Have Increased Wear Resistance In Oscillating Hitch {7113,7114}
1991/10/21
Sleeves Available For Rebuilding Tractor Oscillating Hitch Pin Bores{7057,7066}
1993/05/10
New Hitch Pin Arrangement Provides Better Pin Retention{7057,7050}
1993/06/21
Procedure For Tightening Tapered Vertical Hitch Pins {7113,7100}
1993/10/18
New Locking Plate And Thrust Flange Used In Hitch Drive Shaft Group{7051}
1994/07/25
Drive Shaft Bearings Inside The Hitch Need To Be Greased During Assembly {3253,7100}
1994/08/22
New Hitch Seal And Retaining Ring Used In Rear Frame Groups Reduces Hitch Face Wear{7051}
1994/09/26
Procedure For Measuring Oscillating Hitch Wear {7113,7114}
1994/12/12
New Longer Bushings Are Available To Service Hitch Assemblies {7113,7114}
1999/11/29
Disassembly and Assembly
Hood
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Service Letter-NACD
Stop Plates Need To Be Installed On The Steer Locks Of Certain D25D, D30D, D40D, D350D, And D400D Articulated Dump Trucks
Stop Plates Need To Be Installed On The Steer Locks Of Certain D25D, D30D, D40D, D350D, And D400D Articulated Dump Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-China
Service Letter-Asia
Service Letter-APD
Special Instruction
Installation of Battery Storage Area Underside Covers{7257}
Installation of Battery Storage Area Underside Covers{7257}
Service Letter-NACD
Product Support Program For Reinforcing The Tractor Frame In The Area Of The Suspension Frame Pivot On Certain D25D, D30D, D40D, D350D, AND D400D Articulated Trucks
Product Support Program For Reinforcing The Tractor Frame In The Area Of The Suspension Frame Pivot On Certain D25D, D30D, D40D, D350D, AND D400D Articulated Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Battery Tray Repositioned For Better Clearance{1402,7250,7257}
1990/01/08
New Battery Tray Increases Clearance For Hose Assemblies and Governor Cable{7257}
1990/11/26
Check New Front Frames To Insure Retainer "Keep" Plates Are Installed{7051,7057,7072,7073}
1991/01/28
Rear Transmission Guard Has New Hose Support Assembly Over Hitch{5057}
1991/01/28
Angled Grease Fitting In Lower Hitch Pin Gives Easier Access{7116}
1991/04/08
Improved Spherical Joint Resists Corrosion And Exhaust Leaks{1061,1088,7258}
1992/09/07
Sleeves Available For Rebuilding Tractor Oscillating Hitch Pin Bores{7057,7066}
1993/05/10
Shims Used To Provide Clearance Between Pin Retainers And Truck Body{7258,7250}
1993/05/10
New Hitch Pin Arrangement Provides Better Pin Retention{7057,7050}
1993/06/21
New Torque Specification On Front Suspension Frames{7050,7200}
1993/08/23
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Special Instruction
Assembly and Installation of Inverted Duo-Cone Seals{7561}
Assembly and Installation of Inverted Duo-Cone Seals{7561}
Service Magazine
Raised Rear Step And Mud Flaps Provide More Clearance On Articulated Trucks {7254,4220}
1997/06/30
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Service Magazine
Angled Grease Fitting In Lower Hitch Pin Gives Easier Access{7116}
1991/04/08

Truck sale:

Caterpillar D25D
 
Caterpillar D25D
- Off Highway Trucks
FOLEY, INC.
Caterpillar D25D
 
Caterpillar D25D
- Off Highway Trucks
FOLEY, INC.
 
 
Caterpillar D25D, Construction
- Articulated Dump Trucks (ADTs)
BERGERAT MONNOYEUR S.A.S.
Belgium
 
65,000 
Caterpillar D25D, Construction
- Articulated Dump Trucks (ADTs)
HOLT CAT
 
 
CATERPILLAR D25D 1990
- ARTICULATED TRUCKS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.