AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

SUPPLEMENT FOR TRUCKS WITH 3Z-5523 MODIFICATIONS 1HK00001-UP (MACHINE) ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



ARTICULATED TRUCK D25D ARTICULATED TRUCK 1HK
 SUPPLEMENT FOR TRUCKS WITH 3Z-5523 MODIFICATIONS 1HK00001-UP (MACHINE) SEBC1083 D25D 1HK   (1989)

Parts group D25D:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
HEATER GP
ENGINE WATER HEATER ARRANGEMENT
3Z-5523 ENGINE WATER HEATER ARRANGEMENT
CP-3Z5523 ENGINE WATER HEATER ARRANGEMENT
Use 6N1604 Cap As. to protect the element terminals when 4N-8227 Cord As. is removed.

Information:

(For parts list, see above)

Special Instruction
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AIR DRYER ON CERTAIN ARTICULATED TRUCKS, OFF-HIGHWAY TRACTORS, OFF-HIGHWAY TRUCKS, UNDERGROUND MINING TRUCKS, WHEEL LOADERS, AND WHEEL TRACTOR SCRAPERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AIR DRYER ON CERTAIN ARTICULATED TRUCKS, OFF-HIGHWAY TRACTORS, OFF-HIGHWAY TRUCKS, UNDERGROUND MINING TRUCKS, WHEEL LOADERS, AND WHEEL TRACTOR SCRAPERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Information Release Memo
CAT REMAN ANNOUNCES NEW PRODUCT TYPE: REMAN AIR DRYER CARTRIDGES
CAT REMAN ANNOUNCES NEW PRODUCT TYPE: REMAN AIR DRYER CARTRIDGES
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AIR DRYER ON CERTAIN ARTICULATED TRUCKS, OFF-HIGHWAY TRACTORS, OFF-HIGHWAY TRUCKS, UNDERGROUND MINING TRUCKS, WHEEL LOADERS, AND WHEEL TRACTOR SCRAPERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AIR DRYER ON CERTAIN ARTICULATED TRUCKS, OFF-HIGHWAY TRACTORS, OFF-HIGHWAY TRUCKS, UNDERGROUND MINING TRUCKS, WHEEL LOADERS, AND WHEEL TRACTOR SCRAPERS
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406}
Installation of 262-6141 Alarm Gp {7406}
Service Letter-NACD
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Service Letter-Australia
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Service Letter-CFEL
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Service Letter-CSARL
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Service Letter-Americas
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Service Letter-Brazil
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Service Letter-China
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Service Letter-Asia
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Service Letter-APD
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Service Magazine
New Backup Lamp Group Resists Shock and Vibration{1428}
1995/10/30
Backup Alarms Improved{7406}
1997/05/19
Engine News
Repair Parts Available for Alternator R-Terminal {1405}
2000/12/01
Harness Repair of Alternator R-Terminal Connector {1405}
2000/12/01
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Technical Information Bulletin
Some 9X-7803 Alternators Were Mislabeled As 8C-6163
Some 9X-7803 Alternators Were Mislabeled As 8C-6163
Specifications
Alternator
26SI Series Alternator
Alternator
30SI Series and 34SI Series Alternator
Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Systems Operation
General Information
26SI Series Alternator
Component Description
26SI Series Alternator
Normal Operation
26SI Series Alternator
General Information
30SI Series and 34SI Series Alternator
Normal Operation
30SI Series and 34SI Series Alternator
Component Description
30SI Series and 34SI Series Alternator
General Information
HDB Series and M1 Series Heavy Duty Brushless Alternators
Normal Operation
HDB Series and M1 Series Heavy Duty Brushless Alternators
Component Description
HDB Series and M1 Series Heavy Duty Brushless Alternators
Testing and Adjusting
T1 Alternator Output - Test
26SI Series Alternator
T2 Electrical System Current - Test
26SI Series Alternator
T3 Charging System - Test
26SI Series Alternator
T4 Alternator Drive System - Check
26SI Series Alternator
T5 Alternator Current - Test
26SI Series Alternator
T6 Residual Magnetism Restoration
26SI Series Alternator
T7 Identifying Source of Current Draw - Test
26SI Series Alternator
T8 Alternator Overcharging - Test
26SI Series Alternator
Initial Troubleshooting Procedure
26SI Series Alternator
General Information
26SI Series Alternator
Component - Test
26SI Series Alternator
T1 Alternator Output - Test
30SI Series and 34SI Series Alternator
T2 Electrical System Current - Test
30SI Series and 34SI Series Alternator
T3 Charging System - Test
30SI Series and 34SI Series Alternator
T4 Alternator Drive System - Check
30SI Series and 34SI Series Alternator
T5 Alternator Current - Test
30SI Series and 34SI Series Alternator
T6 Residual Magnetism Restoration
30SI Series and 34SI Series Alternator
T7 Identifying Source of Current Draw - Test
30SI Series and 34SI Series Alternator
T8 Alternator Overcharging - Test
30SI Series and 34SI Series Alternator
General Information
30SI Series and 34SI Series Alternator
Initial Troubleshooting Procedure
30SI Series and 34SI Series Alternator
Component - Test
30SI Series and 34SI Series Alternator
Field Winding - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Capacitor - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Stator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Rectifier - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Residual Magnetism - Restore
HDB Series and M1 Series Heavy Duty Brushless Alternators
Regulator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Troubleshooting
General Information
HDB Series and M1 Series Heavy Duty Brushless Alternators
Charging System
HDB Series and M1 Series Heavy Duty Brushless Alternators
Disassembly and Assembly
Alternator
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Accumulator-Charge & Test Procedure
D25D,D30D AND D350D ARTICULATED DUMP TRUCKS VEHICLE SYSTEMS
Alternator - Assemble
26SI Series Alternator
Alternator - Disassemble
26SI Series Alternator
Alternator - Disassemble
30SI Series and 34SI Series Alternator
Alternator - Assemble
30SI Series and 34SI Series Alternator
Alternator - Disassemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Disassemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Alternator Ground Cable May Have Been Omitted {1405}
1993/01/18
Higher Output Alternator Used {1405,1406,1400}
1994/01/24
Higher Output Alternator Used {1405,1406,1400}
1994/03/21
Higher Output Alternator Used {1405,1406,1400}
1994/06/06
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Repair Parts Available for Alternator R-Terminal {1405}
2000/10/02
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Engine News
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Installation of Battery Storage Area Underside Covers{7257}
Installation of Battery Storage Area Underside Covers{7257}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
New Clips Need To Be Installed On Certain D25D, D30D, D250E, D300E, D350E, And D400E Articulated Trucks To Prevent Battery Cable Movement
New Clips Need To Be Installed On Certain D25D, D30D, D250E, D300E, D350E, And D400E Articulated Trucks To Prevent Battery Cable Movement
Service Letter-Australia
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Service Letter-CFEL
Service Letter-CSARL
New Clips Need To Be Installed On Certain D25D, D30D, D250E, D300E, D350E, And D400E Articulated Trucks To Prevent Battery Cable Movement
New Clips Need To Be Installed On Certain D25D, D30D, D250E, D300E, D350E, And D400E Articulated Trucks To Prevent Battery Cable Movement
Technical Information Bulletin
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Service Letter-China
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Service Letter-Asia
Service Letter-APD
Service Magazine
Battery Tray Repositioned For Better Clearance{1402,7250,7257}
1990/01/08
Maintenance Free Batteries{1401}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
New Fittings In Brake Valve Improve Hose Clearance At Battery Carrier{4257,7553,7554}
1990/11/26
New Battery Tray Increases Clearance For Hose Assemblies and Governor Cable{7257}
1990/11/26
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
New Covers On The Underside Of The Battery Storage Area Prevents Dirt From Entering {7257}
1993/01/25
New Speed Sensors Available{1907,1900,7462}
1993/08/30
New Hi/Low Refrigerant Pressure Switch Is Now Used On Certain Air Conditioned Machines{7320}
1994/08/22
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Improvements To Air Conditioning Hi-Lo Switch{1435,7320}
1996/01/22
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
New Fuse Cap Available {1417}
1996/10/07
Cover Protects Fuse Panel {1417}
1998/09/28
Special Instruction
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620}
2014/02/06
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
A New Handheld Digital Manometer is Now Available {7490}
A New Handheld Digital Manometer is Now Available {7490}
Truck Engine News
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04
Engine News
New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/01
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/03/28
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Service Magazine
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/26
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
Service Letter-Asia
Service Letter-APD
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631}
2001/04/09
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
1992/04/06
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat<SUP>&reg;</SUP> Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Special Instruction
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606}
2006/11/13
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Technical Information Bulletin
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
Service Magazine
Long Life Bulbs Available For 6U4358 Rear Lamp Assembly{1429}
1990/01/08
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Correct Mounting Of 2M9346 Pressure Switch (Stop Lamp Switch) {1400}
1991/10/21
New Headlamps{1429}
1992/11/09
Improved Stop/Tail and Turn Lamp Groups Now Available {1400}
1993/10/04
Identification Plate For Starting/Charging Diagnostic Connector {1450,7557,7569}
1994/02/28
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
New Backup Lamp Group Resists Shock and Vibration{1428}
1995/10/30
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Improved Stop/Tail/Turn Lamps Now Available{1432}
1998/07/20
Special Instruction
Installation of Battery Storage Area Underside Covers{7257}
Installation of Battery Storage Area Underside Covers{7257}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Battery Tray Repositioned For Better Clearance{1402,7250,7257}
1990/01/08
Long Life Bulbs Available For 6U4358 Rear Lamp Assembly{1429}
1990/01/08
Use The 6V2056 Rod And 6V2057 Point To Find True Top Center{0653}
1980/07/14
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Products Equipped With Diagnostic Connectors Require Less Time For Electrical Troubleshooting{1400}
1987/05/04
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
New Electronic Height Sensor For Suspension Control{7215}
1989/12/18
New Fittings In Brake Valve Improve Hose Clearance At Battery Carrier{4257,7553,7554}
1990/11/26
Use Correct Electronic Height Sensor (Printed Circuit Board) In Suspension Circuit; Incorrect Part Number In Parts Manuals{7215}
1990/11/26
New Battery Tray Increases Clearance For Hose Assemblies and Governor Cable{7257}
1990/11/26
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
New Headlamps{1429}
1992/11/09
New Speed Sensors Available{1907,1900,7462}
1993/08/30
New Hi/Low Refrigerant Pressure Switch Is Now Used On Certain Air Conditioned Machines{7320}
1994/08/22
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
All-inclusive Electrical Schematic Listing{1400}
1995/03/27
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
2000/10/30
An Improved Starting Motor is Now Available {1453}
2007/04/30
A New Starter Solenoid is Now Available {1467}
2008/03/17
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Magazine
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Service Magazine
New Magnetic Sensor Has Improved Shell And Potting Compound {7463,3175}
1990/10/01
New Speed Sensors Available{1907,1900,7462}
1993/08/30
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Disassembly and Assembly
Coolant Temperature Sensor - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
New Electronic Height Sensor For Suspension Control{7215}
1989/12/18
New Magnetic Sensor Has Improved Shell And Potting Compound {7463,3175}
1990/10/01
Use Correct Electronic Height Sensor (Printed Circuit Board) In Suspension Circuit; Incorrect Part Number In Parts Manuals{7215}
1990/11/26
New Height Suspension Electronic Board Assembly Provides Longer Service Life{1418,7215}
1993/07/26
New Speed Sensors Available{1907,1900,7462}
1993/08/30
New Temperature Switch Assembly And Tube Assemblies Used To Improve Torque Converter Temperature Sensing {7413}
1993/12/27
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Sensor Group-Suspension Control Is Improved With Increased Reliability And Moisture Resistance{1400}
1997/09/29
Supplement For Effectivity On Suspension Control Sensor Group {7227}
1998/01/26
Replacement of the Electronic Height Sensor for the Suspension Levelling Control System {7215}
2002/04/29
Troubleshooting Column-Type Fuel Level Senders {5574, 7481}
2007/03/19
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Disassembly and Assembly
Fuel Shutoff Solenoid
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Disassembly and Assembly
Fuel Shutoff Solenoid
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Service Magazine
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Disassembly and Assembly
Fuel Shutoff Solenoid
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Fuel Shutoff Solenoid - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/19
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Identification Plate For Starting/Charging Diagnostic Connector {1450,7557,7569}
1994/02/28
General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Disassembly and Assembly
Electric Starting Motor
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
1992/04/06
0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/11/29
New Starting Motors Used {1453}
2002/05/13
Examine Failed Starting Motors to Understand the Reason for Failure {1453}
2002/10/28
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Repair/Replacement Procedure for <NOBR> 5C-6108</NOBR> Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Service Letter-NACD
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Remove Certain 1005571 Switches From Parts Stock
Remove Certain 1005571 Switches From Parts Stock
Service Letter-Australia
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Remove Certain 1005571 Switches From Parts Stock
Remove Certain 1005571 Switches From Parts Stock
Service Letter-CFEL
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Remove Certain 1005571 Switches From Parts Stock
Remove Certain 1005571 Switches From Parts Stock
Service Letter-CSARL
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Remove Certain 1005571 Switches From Parts Stock
Remove Certain 1005571 Switches From Parts Stock
Service Letter-Americas
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Remove Certain 1005571 Switches From Parts Stock
Remove Certain 1005571 Switches From Parts Stock
Service Letter-Brazil
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Remove Certain 1005571 Switches From Parts Stock
Remove Certain 1005571 Switches From Parts Stock
Technical Information Bulletin
Steering Flow Switch May Not Function Correctly
Steering Flow Switch May Not Function Correctly
Machine Start Switch Key May Not Fit Properly{1416}
Machine Start Switch Key May Not Fit Properly{1416}
Specifications
Pressure Switch<BR> (6T-1546)
D25D, D30D AND D350D ARTICULATED TRUCKS AIR SYSTEM & BRAKES
Pressure Switch<BR> (9G-8009)
D25D, D30D AND D350D ARTICULATED TRUCKS AIR SYSTEM & BRAKES
Service Letter-China
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Remove Certain 1005571 Switches From Parts Stock
Remove Certain 1005571 Switches From Parts Stock
Service Letter-Asia
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Remove Certain 1005571 Switches From Parts Stock
Remove Certain 1005571 Switches From Parts Stock
Service Letter-APD
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter Cancellation
Service Letter Cancellation
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
A New Flow Switch And/or Tube Assembly Needs To Be Installed On Certain D25D, D30D, D40D, D350D, And D400D Articulated Trucks
Remove Certain 1005571 Switches From Parts Stock
Remove Certain 1005571 Switches From Parts Stock
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
New Pressure Switch Used For Parking Brake Warning{7332,7486}
1991/09/30
Correct Mounting Of 2M9346 Pressure Switch (Stop Lamp Switch) {1400}
1991/10/21
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
New Temperature Switch Offers Increased Reliability{7477,7490,7332}
1992/05/25
New Differential Lock Indicator Switch Used For Articulated Trucks{3264,7400}
1992/10/05
New Temperature Switch Assembly And Tube Assemblies Used To Improve Torque Converter Temperature Sensing {7413}
1993/12/27
New Hi/Low Refrigerant Pressure Switch Is Now Used On Certain Air Conditioned Machines{7320}
1994/08/22
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Improved Prelube Pressure Switch Available {1400,1435,1319}
1995/09/11
Air Conditioner/Heater Fan Switch Improved{1435,7320}
1996/01/08
Improvements To Air Conditioning Hi-Lo Switch{1435,7320}
1996/01/22
Improved Roller Switch Assembly Used{1400}
1996/06/17
New Steering Flow Switch Assembly Prevents Open Contacts {7492}
1996/08/12
Installation Of New Inter-Axle Differential Lock Indicator Switch{3287,3270,3273}
1998/10/26
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Key Must Be Oriented Correctly in Order to Avoid Damage to the Key or Start Switch {1416}
2003/10/27
Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}
2009/04/06
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/06/06
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04
Engine News
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
2002/08/01
The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
2004/04/19
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785}
2006/02/13
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
2006/10/16
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/03/28
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
An Aid To Reading Multimeter Scales{0785}
An Aid To Reading Multimeter Scales{0785}
Tool Operating Manual
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Service Tools
HDB Series and M1 Series Heavy Duty Brushless Alternators
Service Magazine
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Products Equipped With Diagnostic Connectors Require Less Time For Electrical Troubleshooting {1400}
1991/04/01
Identification Plate For Starting/Charging Diagnostic Connector {1450,7557,7569}
1994/02/28
New Tachometer Signal Generator Improves Reliability {7487}
1999/03/15
Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785}
2002/08/19
USB Cable Connects PC with USB Ports to Communication Adapter or to DataView Tool Group {0785, 0788}
2004/03/15
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/11/27
New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
2006/09/25
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Disassembly and Assembly
Relay Valves
D25D,D30D AND D350D ARTICULATED DUMP TRUCKS VEHICLE SYSTEMS
Service Magazine
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Service Letter-NACD
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Product Support Program For Installing A Parking Brake Moving Off Alarm And Air Pressure Switch On Certain D25D, D30D, And D350D Articulated Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
New Backup Lamp Group Resists Shock and Vibration{1428}
1995/10/30
Backup Alarms Improved{7406}
1997/05/19
Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/11/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Installation of Battery Storage Area Underside Covers{7257}
Installation of Battery Storage Area Underside Covers{7257}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
Service Letter Cancellation
Service Letter Cancellation
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
New Clips Need To Be Installed On Certain D25D, D30D, D250E, D300E, D350E, And D400E Articulated Trucks To Prevent Battery Cable Movement
New Clips Need To Be Installed On Certain D25D, D30D, D250E, D300E, D350E, And D400E Articulated Trucks To Prevent Battery Cable Movement
Service Letter-Australia
Service Letter Cancellation
Service Letter Cancellation
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Service Letter-CFEL
Service Letter Cancellation
Service Letter Cancellation
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Service Letter-CSARL
Service Letter Cancellation
Service Letter Cancellation
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
New Clips Need To Be Installed On Certain D25D, D30D, D250E, D300E, D350E, And D400E Articulated Trucks To Prevent Battery Cable Movement
New Clips Need To Be Installed On Certain D25D, D30D, D250E, D300E, D350E, And D400E Articulated Trucks To Prevent Battery Cable Movement
Service Letter-Americas
Service Letter Cancellation
Service Letter Cancellation
Service Letter-Brazil
Technical Information Bulletin
Refrigerant Compressors May Fail
Refrigerant Compressors May Fail
Steering Flow Switch May Not Function Correctly
Steering Flow Switch May Not Function Correctly
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
Service Letter Cancellation
Service Letter Cancellation
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Service Letter-Asia
Service Letter Cancellation
Service Letter Cancellation
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
Service Letter Cancellation
Service Letter Cancellation
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Battery Cables And Air Hoses Need To Be Rerouted On Certain D25D And D30D Articulated Trucks
Service Magazine
Battery Tray Repositioned For Better Clearance{1402,7250,7257}
1990/01/08
Long Life Bulbs Available For 6U4358 Rear Lamp Assembly{1429}
1990/01/08
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Improved Access To Hydraulic Oil Level Indicator Harness{7490}
1990/09/24
New Fittings In Brake Valve Improve Hose Clearance At Battery Carrier{4257,7553,7554}
1990/11/26
New Battery Tray Increases Clearance For Hose Assemblies and Governor Cable{7257}
1990/11/26
Correct Mounting Of 2M9346 Pressure Switch (Stop Lamp Switch) {1400}
1991/10/21
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
New Covers On The Underside Of The Battery Storage Area Prevents Dirt From Entering {7257}
1993/01/25
New Speed Sensors Available{1907,1900,7462}
1993/08/30
Improved Stop/Tail and Turn Lamp Groups Now Available {1400}
1993/10/04
New Hi/Low Refrigerant Pressure Switch Is Now Used On Certain Air Conditioned Machines{7320}
1994/08/22
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
New Backup Lamp Group Resists Shock and Vibration{1428}
1995/10/30
Air Conditioner/Heater Fan Switch Improved{1435,7320}
1996/01/08
Improvements To Air Conditioning Hi-Lo Switch{1435,7320}
1996/01/22
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
New Fuse Cap Available {1417}
1996/10/07
Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07
Cover Protects Fuse Panel {1417}
1998/09/28
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09
The Main Power Relay Has Improved Sealing {1423}
2009/05/18
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Service Magazine
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation Of Operator ID System on Cat<SUP>&reg;</SUP> and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Tool Operating Manual
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Improved VisionLink<SUP>TM</SUP> Software Is Now Available for Certain Caterpillar Machines {7601}
2012/09/11
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620}
2012/12/10
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
New Phone Number for VIMS Support Is Now Available for All Cat<SUP>&reg;</SUP> Products Equipped with VIMS {7601}
2015/03/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
A New Handheld Digital Manometer is Now Available {7490}
A New Handheld Digital Manometer is Now Available {7490}
How To Identify Failures To Electric Jacket Water Heaters{1383}
1988/04/18
New Bracket Available For Installation Of Jacket Water Heater{1383}
1979/09/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Clamps And New Hose Now Used for Water Heater Lines To Improve Service Life {1383,1812}
1997/08/18
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Special Instruction
Installation Instructions For Product Link 101 Inline Timer{7602}
Installation Instructions For Product Link 101 Inline Timer{7602}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620}
Product Link MODEM Programming with Cat Electronic Technician (ET){7606, 7620}
Product Link PL-102C System Installation{7606}
Product Link PL-102C System Installation{7606}
Product Link PL-102C{7602}
Product Link PL-102C{7602}
Installation Guide for Product Link PL121SR and PL321{7606}
Installation Guide for Product Link PL121SR and PL321{7606}
Operation of Product Link{7606}
Operation of Product Link{7606}
Product Link PL121SR{7606}
Product Link PL121SR{7606}
Service Letter-NACD
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
Service Letter-Australia
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
Service Letter-CFEL
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
Service Letter-CSARL
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
Service Letter-Americas
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
Service Letter-Truck/Ag/Marine
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
Technical Information Bulletin
Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606}
Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606}
Product Link Antenna Placement{7606}
Product Link Antenna Placement{7606}
Product Link Hours Versus Service Meter Hours Accuracy Issue{7606}
Product Link Hours Versus Service Meter Hours Accuracy Issue{7606}
Product Link Registration Problems{733T, 7606}
Product Link Registration Problems{733T, 7606}
Multiple Registration Messages Occur with Product Link{733T, 7606}
Multiple Registration Messages Occur with Product Link{733T, 7606}
Product Link PL321 May Accumulate 24 Hours Daily{7606}
Product Link PL321 May Accumulate 24 Hours Daily{7606}
Registration of Product Link in EquipmentManager{7606}
Registration of Product Link in EquipmentManager{7606}
Location Updates Are Not Being Reported From The Product Link PL321{7606}
Location Updates Are Not Being Reported From The Product Link PL321{7606}
Service Letter-China
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
Service Letter-Asia
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
Service Letter-APD
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN ARTICULATED TRUCKS
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631}
2001/04/09
New Version of Product Link Available {7602}
2001/08/27
New Flash File Software Is Used for Product Link 151/201 {7606, 7620}
2002/07/15
New Flexible Antenna Whip Available for Product Link {7606}
2002/12/02
New Flash File Software Is Used for Product Link 151/201 {7620}
2003/03/10
Product Link Cellular Is Now Available {7602}
2004/08/02
Correction to Special Instruction, REHS2143, "Product Link PL-102C System Installation" {7602}
2004/08/02
Correction to Special Instruction, &quot;Product Link PL102C System Installation&quot; and Systems Operation, Testing and Adjust, &quot;Product Link PL102C&quot; {7602}
2004/12/13
New PC Service Tool Software Released for Cellular Based Product Link {7620}
2004/12/20
Correction to Special Instruction, "Product Link PL102C System Installation" {7620}
2004/12/13
Procedure to Identify which COM PORT the USB Device Is Occupying and the Procedure to Change the Default COM PORT Setting {7606}
2005/01/10
New Product Link Software Available for PL151 and PL201 {7606}
2005/01/10
New Product Link Systems Are Now Available {7606}
2005/02/07
New Software Available for Product Link PL-151 and PL-201 {7620}
2005/05/02
New Product Link Software Is Now Available {7606, 7620}
2005/12/19
New Software Available for Product Link {7606, 7620}
2006/10/16
New Product Link Software Is Now Available {7606, 7620}
2007/05/14
New Product Link Hardware Is Now Available {7606}
2008/03/17
New Processes Improve Registration of Product Link {7338, 7606}
2008/04/14
New Software for Product Link is Now Available {7606, 7620}
2008/03/10
New Software for Product Link is Now Available {7606, 7620}
2008/05/19

Truck sale:

Caterpillar D25D
 
Caterpillar D25D
- Off Highway Trucks
FOLEY, INC.
Caterpillar D25D
 
Caterpillar D25D
- Off Highway Trucks
FOLEY, INC.
 
 
Caterpillar D25D, Construction
- Articulated Dump Trucks (ADTs)
BERGERAT MONNOYEUR S.A.S.
Belgium
 
65,000 
Caterpillar D25D, Construction
- Articulated Dump Trucks (ADTs)
HOLT CAT
 
 
CATERPILLAR D25D 1990
- ARTICULATED TRUCKS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.