AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

SUPPLEMENT FOR TRUCKS WITH 3Z-5685 AND 3Z-5786 MODIFICATIONS 7FN00001-UP (MACHINE) POWER TRAIN Caterpillar SIS



ARTICULATED TRUCK D300E ARTICULATED TRUCK 7FN
 SUPPLEMENT FOR TRUCKS WITH 3Z-5685 AND 3Z-5786 MODIFICATIONS 7FN00001-UP (MACHINE) SEBC1102 D300E 7FN   (1996)

Parts group D300E:

  For full view, you need register
POWER TRAIN
GEAR GP
GEAR GP-TRANSFER
141-3909 GEAR GP-TRANSFER
CP-1413909 GEAR GP-TRANSFER
Part of Long Wheelbase Arrangement Modification
SHAFT GP
SHAFT GP-HITCH DRIVE
128-4346 SHAFT GP-HITCH DRIVE
CP-1284346 SHAFT GP-HITCH DRIVE
Part of Long Wheelbase Arrangement Modification
For parts breakdown of 2U6628 see page 175 in the standard parts manual SEBP2453
UNIVERSAL JOINT GP
126-7355 UNIVERSAL JOINT GP
CP-1267355 UNIVERSAL JOINT GP
Part of Long Wheelbase Arrangement Modification
DRIVE GP-FINAL
LONG WHEELBASE DRIVE ARRANGEMENT MODIFICATION
LONG WHEELBASE DRIVE ARRANGEMENT MODIFICATION
LONG WHEELBASE DRIVE ARRANGEMENT MODIFICATION
1389539-Page 9, 1267355-Page 5, 1284346-Page 4, 1413909-Page 6

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Specifications
Accumulator (Retarder)
D250E and D300E Articulated Trucks Power Train
Service Magazine
Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Special Instruction
Installation of Differential Thrust Stops On Front, Center And Rear Axles{3258, 3260}
Installation of Differential Thrust Stops On Front, Center And Rear Axles{3258, 3260}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Replacement of Support Blocks for the Rear Axle and the Center Axle A-Frames
Replacement of Support Blocks for the Rear Axle and the Center Axle A-Frames
Salvage Procedure for the Bores for the Front Suspension Mounting Pin in the Front Frame{3253, 3278, 4202, 7050, 7051, 7203}
Salvage Procedure for the Bores for the Front Suspension Mounting Pin in the Front Frame{3253, 3278, 4202, 7050, 7051, 7203}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Specifications
Front Axle
D250E and D300E Articulated Trucks Power Train
Center Axle
D250E and D300E Articulated Trucks Power Train
Rear Axle
D250E and D300E Articulated Trucks Power Train
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Thermal Spray Procedures for ADT Spindle and Wheel Bearing Bores {0679, 4205, 4215}
Thermal Spray Procedures for ADT Spindle and Wheel Bearing Bores {0679, 4205, 4215}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Inter-Axle Differential
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Drive Shaft, (Transfer Gear Case To Center Axle)
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Axles
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Front Axle Housing
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Center Axle Housing
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Rear Axle Housing
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Service Magazine
Procedure For Checking Inter Axle Differential Operation {3264}
1997/02/10
Procedure On Removal Of Cradle Mounting Pin {3278,3268,7200}
1998/08/31
Supplement On D&A Manual For Remove Axles (Front & Rear){3259}
1998/10/12
Replacement of Support Blocks for the Rear Axle and the Center Axle A-Frames Covered in Special Instruction, REHS0931 {3278, 7051}
2001/01/08
Revised Special Instruction, REHS0888-01, "Salvage Procedure for the Bores for the Front Suspension Mounting Pin in the Front Frame" is Available {3253, 3278, 4202, 4257, 7050, 7051, 7203}
2003/08/25
Clarification of the Markings on the Pinion Gear {3256, 3258}
2004/07/26
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Technical Information Bulletin
3V-0197 BOLTS MAY NOT HAVE THE PROPER HEAT TREATMENT
3V-0197 BOLTS MAY NOT HAVE THE PROPER HEAT TREATMENT
Reuse And Salvage Guidelines
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Service Magazine
New Foot Actuator Switch For Differential Lock Improves Reliability{3270,1435,3258,3264}
1997/12/08
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Retarder Solenoid Control Valve
D250E and D300E Articulated Trucks Power Train
Solenoid Valve (Retarder)
D250E and D300E Articulated Trucks Power Train
Accumulator (Retarder)
D250E and D300E Articulated Trucks Power Train
Retarder Hydraulic Control Valve
D250E and D300E Articulated Trucks Power Train
Solenoid Valve (Retarder)
D250E and D300E Articulated Trucks Power Train
Disassembly and Assembly
Retarder Control Solenoid Valve
D250E & D300E ARTICULATED TRUCKS MACHINE SYSTEMS
Service Magazine
A New Hoist, Retarder, And Turn Signal Levers Now Used To Prevent Loosening {1430,3121}
1996/10/14
Proper Orifice Location Provides Correct Retarder Control {3123,3100,3109,3126,3140}
1997/04/07
Hydraulic Control System Improvements Reduce Retarder Response Time{1019}
1997/09/22
Procedure For The Removal Of The Diaphragm In The Retarder Valve {3121,3126}
1999/01/11
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
Specifications
Transmission Hydraulic Control
D250E and D300E Articulated Trucks Power Train
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CONTROL DETENT SPRING ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION DETENT SPRING AND P2 PRESS SWITCH ON CERTAIN D250E, D250E II, D300E, D300E II, D350E, D350E II, AND D400E ARTICULATED TRUCKS
Disassembly and Assembly
Transmission Hydraulic Control Valve
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Service Magazine
Shift Strategy Change{3167,3168,3073}
1997/10/13
Improved Solenoid Valve Group Used In ICM And Planetary Transmissions For Increased Reliability And Longer Service Life{3030}
1998/03/16
New Spring Assembly For Transmission Control Improves Service Life{3073}
1998/07/06
New Spring Assembly For Transmission Control Improves Service Life {3073}
1998/09/28
A New Transmission Detent Spring Provides Improved Durability {3167}
2002/03/04
An Improved Solenoid Valve Group Is Used In Transmissions With ICM For Increased Reliability And Longer Service Life {3124, 3167, 3174}
2009/08/24
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
General Service Information
Specifications
LIMITED SLIP DIFFERENTIAL FOR ARTICULATED TRUCKS
Systems Operations
LIMITED SLIP DIFFERENTIAL FOR ARTICULATED TRUCKS
Testing and Adjusting
LIMITED SLIP DIFFERENTIAL FOR ARTICULATED TRUCKS
Disassembly and Assembly
LIMITED SLIP DIFFERENTIAL FOR ARTICULATED TRUCKS
Maintenance
LIMITED SLIP DIFFERENTIAL FOR ARTICULATED TRUCKS
Special Instruction
Installation of Differential Thrust Stops On Front, Center And Rear Axles{3258, 3260}
Installation of Differential Thrust Stops On Front, Center And Rear Axles{3258, 3260}
Service Letter-NACD
Product Support Program For Increasing The Expected Service Life Of The Output Transfer Gear Group (Dropbox) On Certain D250E Articulated Trucks
Product Support Program For Increasing The Expected Service Life Of The Output Transfer Gear Group (Dropbox) On Certain D250E Articulated Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Differential and Bevel Gear
D250E and D300E Articulated Trucks Power Train
Differential and Bevel Gear
D250E and D300E Articulated Trucks Power Train
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Service Letter-China
Product Support Program For Increasing The Expected Service Life Of The Output Transfer Gear Group (Dropbox) On Certain D250E Articulated Trucks
Product Support Program For Increasing The Expected Service Life Of The Output Transfer Gear Group (Dropbox) On Certain D250E Articulated Trucks
Service Letter-Asia
Reuse And Salvage Guidelines
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
Product Support Program For Increasing The Expected Service Life Of The Output Transfer Gear Group (Dropbox) On Certain D250E Articulated Trucks
Product Support Program For Increasing The Expected Service Life Of The Output Transfer Gear Group (Dropbox) On Certain D250E Articulated Trucks
Disassembly and Assembly
Inter-Axle Differential
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Differential &amp; Bevel Gear (Front)
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Differential &amp; Bevel Gear (Center or Rear)
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Service Magazine
Hydraulic Oil Additive Used That Eliminates Noise In Differentials {3263}
1996/11/11
Procedure For Checking Inter Axle Differential Operation {3264}
1997/02/10
Improved Limited Slip Differential Thrust Washers And Hardened Discs Improve Service Life {3263}
1997/07/07
New Foot Actuator Switch For Differential Lock Improves Reliability{3270,1435,3258,3264}
1997/12/08
Supplement For Rolling Torque Specification {3254,3258,3263}
1998/01/26
Improved Limited Slip Differential Thrust Washers And Hardened Discs Improve Service Life {3263}
1998/02/09
Supplement For Disassembly And Assembly Of Front, Center, And Rear Differentials{3258}
1998/02/23
Supplement To Correct Bearing Cap Torque For Differential {3258}
1998/05/11
Incorrect End Float For Limited Slip Differentials {3258}
1999/07/05
Correction to Service Magazine , "Supplement to Correct Bearing Cap Torque for Differential" {3258}
2001/03/12
Correction to Disassembly and Assembly , "Differential &amp; Bevel Gear (Center or Rear) 'Disassembly &amp; Assembly Front, Center &amp; Rear Differentials (D250E)'" {3256, 3258}
2003/08/04
Use <NOBR> 1U-9891</NOBR> Hydraulic Oil Additive to Eliminate Brake Chatter and Reduce Noise in the Limited Slip Differential {3263, 5095}
2008/10/27
Clarification of the Markings on the Pinion Gear {3256, 3258}
2004/07/26
Service Manual Is Available For Servicing The Limited Slip Differential Used In Articulated Trucks {3258, 3263}
2006/11/20
General Service Information
Specifications
LIMITED SLIP DIFFERENTIAL FOR ARTICULATED TRUCKS
Systems Operations
LIMITED SLIP DIFFERENTIAL FOR ARTICULATED TRUCKS
Testing and Adjusting
LIMITED SLIP DIFFERENTIAL FOR ARTICULATED TRUCKS
Disassembly and Assembly
LIMITED SLIP DIFFERENTIAL FOR ARTICULATED TRUCKS
Maintenance
LIMITED SLIP DIFFERENTIAL FOR ARTICULATED TRUCKS
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Correction to Service Magazine , "Supplement to Correct Bearing Cap Torque for Differential" {3258}
2001/03/12
Correction to Disassembly and Assembly , "Differential &amp; Bevel Gear (Center or Rear) 'Disassembly &amp; Assembly Front, Center &amp; Rear Differentials (D250E)'" {3256, 3258}
2003/08/04
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Service Manual Is Available For Servicing The Limited Slip Differential Used In Articulated Trucks {3258, 3263}
2006/11/20
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Magazine
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Specifications
Oil Filter (Transmission)
D250E and D300E Articulated Trucks Power Train
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Transmission Oil Filter
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Letter-NACD
Product Support Program For Increasing The Expected Service Life Of The Output Transfer Gear Group (Dropbox) On Certain D250E Articulated Trucks
Product Support Program For Increasing The Expected Service Life Of The Output Transfer Gear Group (Dropbox) On Certain D250E Articulated Trucks
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Output Transfer Gear Group
D250E and D300E Articulated Trucks Power Train
Transfer Gear Group
D250E and D300E Articulated Trucks Power Train
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Letter-China
Product Support Program For Increasing The Expected Service Life Of The Output Transfer Gear Group (Dropbox) On Certain D250E Articulated Trucks
Product Support Program For Increasing The Expected Service Life Of The Output Transfer Gear Group (Dropbox) On Certain D250E Articulated Trucks
Service Letter-Asia
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Letter-APD
Product Support Program For Increasing The Expected Service Life Of The Output Transfer Gear Group (Dropbox) On Certain D250E Articulated Trucks
Product Support Program For Increasing The Expected Service Life Of The Output Transfer Gear Group (Dropbox) On Certain D250E Articulated Trucks
Disassembly and Assembly
Transmission &amp; Output Transfer Drive
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Transmission &amp; Output Transfer Drive
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Gear Group-Transfer
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Service Magazine
Improved Seals And Bearings Used To Reduce Seal Leaks In Transfer Gear Groups (6WD){3250}
1996/12/23
Improved Seals And Bearings Used To Reduce Seal Leaks In Output Transfer Gear Groups {3159,3003}
1996/12/30
Improved Bearings Used In Output Transfer Gear Group {3159}
1997/01/20
Improved Seals Now Available To Reduce Leaks In Output Transfer Gear Groups {3253,3003,3159,4052}
1997/06/09
Use FT-2549 Receiver Sleeve For Removing Idler Shaft {3159}
1998/03/02
New Output Transfer Gear and Case Gp, a New Gear Pump and Additional Lubrication Lines are Now Available {3159, 5073}
2000/05/15
Connector Kit Allows the Replacement of Speed Sensor Connectors {7493}
2000/07/10
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Contamination Control Guidelines
Filtration Procedure for Articulated Truck Transmission Oil {0680, 0768, 3016, 3030}
Filtration Procedure for Articulated Truck Transmission Oil {0680, 0768, 3016, 3030}
Service Magazine
New Output Transfer Gear and Case Gp, a New Gear Pump and Additional Lubrication Lines are Now Available {3159, 5073}
2000/05/15
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Service Magazine
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Procedure For Checking Inter Axle Differential Operation {3264}
1997/02/10
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Technical Information Bulletin
Missing Rear Gear Train Idler Shaft Mounting Bolt Seals May Result In Oil Leaks
Missing Rear Gear Train Idler Shaft Mounting Bolt Seals May Result In Oil Leaks
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Transmission Pump
D250E and D300E Articulated Trucks Power Train
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Disassembly and Assembly
Scavenge &amp; Transmission Oil Pump
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Service Magazine
New Output Transfer Gear and Case Gp, a New Gear Pump and Additional Lubrication Lines are Now Available {3159, 5073}
2000/05/15
Special Instruction
Field Installation Of 3Z-5818 Automatic Retarder Modification and Service Information For The Factory Installed 3Z-5841 Automatic Retarder Installation{1408, 3120, 7405, 7451}
Field Installation Of 3Z-5818 Automatic Retarder Modification and Service Information For The Factory Installed 3Z-5841 Automatic Retarder Installation{1408, 3120, 7405, 7451}
Specifications
Accumulator (Retarder)
D250E and D300E Articulated Trucks Power Train
Torque Converter
D250E and D300E Articulated Trucks Power Train
Disassembly and Assembly
Torque Converter &amp; Retarder
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Torque Converter &amp; Retarder
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Retarder Control Solenoid Valve
D250E & D300E ARTICULATED TRUCKS MACHINE SYSTEMS
Engine, Retarder &amp; Torque Converter
SUPPLEMENT FOR D250E & D300E ARTICULATED TRUCKS - 3306 ENGIN
Service Magazine
A New Hoist, Retarder, And Turn Signal Levers Now Used To Prevent Loosening {1430,3121}
1996/10/14
Proper Orifice Location Provides Correct Retarder Control {3123,3100,3109,3126,3140}
1997/04/07
Hydraulic Control System Improvements Reduce Retarder Response Time{1019}
1997/09/22
Cover Assembly For Transmission Improved{7153}
1998/07/06
New Rotary Retarder Switch With Improved Reliability Available For Articulated Trucks{7332}
1998/12/28
Procedure For The Removal Of The Diaphragm In The Retarder Valve {3121,3126}
1999/01/11
Disassembly and Assembly
Torque Converter Screen
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Transmission Screen
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2009/01/26
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Salvage Procedure for the Bores for the Front Suspension Mounting Pin in the Front Frame{3253, 3278, 4202, 7050, 7051, 7203}
Salvage Procedure for the Bores for the Front Suspension Mounting Pin in the Front Frame{3253, 3278, 4202, 7050, 7051, 7203}
Specifications
Main Drive Shaft
D250E and D300E Articulated Trucks Power Train
Front Drive Shaft
D250E and D300E Articulated Trucks Power Train
Hitch Drive Shaft
D250E and D300E Articulated Trucks Power Train
Rear Drive Shaft
D250E and D300E Articulated Trucks Power Train
Rear Drive Shaft
D250E and D300E Articulated Trucks Power Train
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Disassembly and Assembly
Drive Shaft, (Transfer Gear Case To Center Axle)
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Drive shaft (Transmission Drop Box To Drive Hitch)
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Main Drive Shaft (Torque Converter To Transmission)
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Front Drive Shaft (Transmission To Front Axle)
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Drive Shaft, (Transfer Gear To Mid Bearing)
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Drive Shaft, (Mid Bearing To Rear Axle)
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Service Magazine
Dimensions To Produce Drive Shaft Sleeve {3253,3267}
1997/05/12
Improved Seals Now Available To Reduce Leaks In Output Transfer Gear Groups {3253,3003,3159,4052}
1997/06/09
New Midshaft Bearing Assemblies Now Used To Increase Service Life {7551,3253,4056}
1997/09/01
Supplement To Correct Front Drive Shaft Group Torque {3250}
1998/08/24
Lubrication Intervals for Spider and Bearings on the Drive Shafts {3253, 7000}
2000/01/31
Lubrication and Maintenance of Drive Shaft Spiders on Articulated Trucks {3251, 3253}
2013/11/06
Improved Universal Joint Group (Drive Shaft) {3251, 3253}
2001/05/14
Orientation of the Lip Seals in Hitch Drive Shaft Groups {3253}
2002/01/07
New Midshaft Bearing Assemblies Now Used to Increase Service Life {3253}
2004/05/03
Revised Special Instruction, REHS0888-01, "Salvage Procedure for the Bores for the Front Suspension Mounting Pin in the Front Frame" is Available {3253, 3278, 4202, 4257, 7050, 7051, 7203}
2003/08/25
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Service Magazine
Lubrication and Maintenance of Drive Shaft Spiders on Articulated Trucks {3251, 3253}
2013/11/06
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Special Instruction
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Filtration Procedure for Articulated Truck Transmission Oil {0680, 0768, 3016, 3030}
Filtration Procedure for Articulated Truck Transmission Oil {0680, 0768, 3016, 3030}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Specifications
Torque Converter
D250E and D300E Articulated Trucks Power Train
Torque Converter
D250E and D300E Articulated Trucks Power Train
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Torque Converter &amp; Retarder
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Torque Converter &amp; Retarder
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Torque Converter Pump Drive Gears
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Torque Converter Accessory Drive Gear
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Torque Converter Screen
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Torque Converter Outlet Relief Valve
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Torque Converter Lock-Up Valve
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Engine, Retarder &amp; Torque Converter
SUPPLEMENT FOR D250E & D300E ARTICULATED TRUCKS - 3306 ENGIN
Service Magazine
Improved Bearing For Torque Converter Drive Gear {3101,7551}
1999/09/06
Assembly Tips for Torque Converter Bearings {3101}
2003/06/30
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2014/11/13
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2014/11/13
Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Technical Information Bulletin
Transmission May Fail To Engage In Gear
Transmission May Fail To Engage In Gear
Transmission May Shift Erractically Or Fail To Engage Certain Gears
Transmission May Shift Erractically Or Fail To Engage Certain Gears
Specifications
Transmission Planetary
D250E and D300E Articulated Trucks Power Train
Transmission Mounting
D250E and D300E Articulated Trucks Power Train
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Procedure for Articulated Truck Transmission Oil {0680, 0768, 3016, 3030}
Filtration Procedure for Articulated Truck Transmission Oil {0680, 0768, 3016, 3030}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission &amp; Output Transfer Drive
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Transmission Screen
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Transmission Oil Filter
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Transmission Priority Valve
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Transmission Hydraulic Control Valve
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Transmission &amp; Output Transfer Drive
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Drive shaft (Transmission Drop Box To Drive Hitch)
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Main Drive Shaft (Torque Converter To Transmission)
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Transmission Output Speed Sensor
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Transmission Oil Cooler
SUPPLEMENT FOR D250E & D300E ARTICULATED TRUCKS - 3306 ENGIN
Service Magazine
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
New Transmission Control (Actual Gear Switch) Now Used{3168}
1996/01/22
Revised Service Manual Module For Transmission Electronic Control Available {3168,3030}
1997/03/03
New Transmission Control Group Improves Operator Comfort {3156}
1997/06/09
New Transmission Control Group Improves Operator Comfort {3065}
1997/08/18
Shift Strategy Change{3167,3168,3073}
1997/10/13
Corrections To Shiftpoint Specifications{3168}
1998/02/23
Improved Solenoid Valve Group Used In ICM And Planetary Transmissions For Increased Reliability And Longer Service Life{3030}
1998/03/16
Cover Assembly For Transmission Improved{7153}
1998/07/06
New Spring Assembly For Transmission Control Improves Service Life{3073}
1998/07/06
New Spring Assembly For Transmission Control Improves Service Life {3073}
1998/09/28
New Electronic Programmable Transmission Control II (EPTC II) Available For Articulated Trucks {3168}
1998/10/19
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Troubleshooting The Gear Position Sensor On Individual Clutch Modulation Transmissions {3168}
1999/07/05
Connector Kit Allows the Replacement of Speed Sensor Connectors {7493}
2000/07/10
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Cat&reg; Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
Cat® Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
Disassembly and Assembly
Torque Converter Lock-Up Valve
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Specifications
Lockup Clutch and Solenoid Valve
D250E and D300E Articulated Trucks Power Train
Solenoid Valve (Lockup Clutch)
D250E and D300E Articulated Trucks Power Train
Service Magazine
An Improved Solenoid Valve Group Is Used In Transmissions With ICM For Increased Reliability And Longer Service Life {3124, 3167, 3174}
2009/08/24
Shift Strategy Change{3167,3168,3073}
1997/10/13
Specifications
Priority Valve
D250E and D300E Articulated Trucks Power Train
Disassembly and Assembly
Transmission Priority Valve
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Specifications
Relief Valve (Torque Converter Outlet)
D250E and D300E Articulated Trucks Power Train
Solenoid and Relief Valve (Output Transfer Gears)
D250E and D300E Articulated Trucks Power Train
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Disassembly and Assembly
Torque Converter Outlet Relief Valve
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Specifications
Retarder Solenoid Control Valve
D250E and D300E Articulated Trucks Power Train
Solenoid Valve (Retarder)
D250E and D300E Articulated Trucks Power Train
Retarder Hydraulic Control Valve
D250E and D300E Articulated Trucks Power Train
Solenoid Valve (Retarder)
D250E and D300E Articulated Trucks Power Train
Disassembly and Assembly
Retarder Control Solenoid Valve
D250E & D300E ARTICULATED TRUCKS MACHINE SYSTEMS
Service Magazine
Proper Orifice Location Provides Correct Retarder Control {3123,3100,3109,3126,3140}
1997/04/07
Procedure For The Removal Of The Diaphragm In The Retarder Valve {3121,3126}
1999/01/11
Specifications
Selector and Pressure Control Valve
D250E and D300E Articulated Trucks Power Train
Technical Information Bulletin
Park Brake Solenoid Valve Troubleshooting Procedure
Park Brake Solenoid Valve Troubleshooting Procedure
Specifications
Retarder Solenoid Control Valve
D250E and D300E Articulated Trucks Power Train
Solenoid Valve (Retarder)
D250E and D300E Articulated Trucks Power Train
Lockup Clutch and Solenoid Valve
D250E and D300E Articulated Trucks Power Train
Solenoid Valve (Lockup Clutch)
D250E and D300E Articulated Trucks Power Train
Solenoid Valve (Upshift and Downshift)
D250E and D300E Articulated Trucks Power Train
Solenoid Valve (Differential Lock)
D250E and D300E Articulated Trucks Power Train
Solenoid and Relief Valve (Output Transfer Gears)
D250E and D300E Articulated Trucks Power Train
Solenoid Valve (Retarder)
D250E and D300E Articulated Trucks Power Train
Service Magazine
Improved Solenoid Valve Group Used In ICM And Planetary Transmissions For Increased Reliability And Longer Service Life{3030}
1998/03/16
An Improved Solenoid Valve Group Is Used In Transmissions With ICM For Increased Reliability And Longer Service Life {3124, 3167, 3174}
2009/08/24
Specifications
Selector and Pressure Control Valve
D250E and D300E Articulated Trucks Power Train
Disassembly and Assembly
Transmission Hydraulic Control Valve
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Service Magazine
Shift Strategy Change{3167,3168,3073}
1997/10/13
Improved Solenoid Valve Group Used In ICM And Planetary Transmissions For Increased Reliability And Longer Service Life{3030}
1998/03/16
New Spring Assembly For Transmission Control Improves Service Life{3073}
1998/07/06
New Spring Assembly For Transmission Control Improves Service Life {3073}
1998/09/28
An Improved Solenoid Valve Group Is Used In Transmissions With ICM For Increased Reliability And Longer Service Life {3124, 3167, 3174}
2009/08/24
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Thermal Spray Procedures for ADT Hub {0679, 4051}
Thermal Spray Procedures for ADT Hub {0679, 4051}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Salvage Procedure for the Bores for the Front Suspension Mounting Pin in the Front Frame{3253, 3278, 4202, 7050, 7051, 7203}
Salvage Procedure for the Bores for the Front Suspension Mounting Pin in the Front Frame{3253, 3278, 4202, 7050, 7051, 7203}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Service Letter-NACD
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Service Letter-Australia
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Service Letter-CFEL
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Service Letter-CSARL
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Service Letter-Americas
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Specifications
Final Drive and Wheel
D250E and D300E Articulated Trucks Power Train
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Service Letter-China
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Service Letter-Asia
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Reuse And Salvage Guidelines
Thermal Spray Procedures for ADT Hub {0679, 4051}
Thermal Spray Procedures for ADT Hub {0679, 4051}
Thermal Spray Procedures for ADT Spindle and Wheel Bearing Bores {0679, 4205, 4215}
Thermal Spray Procedures for ADT Spindle and Wheel Bearing Bores {0679, 4205, 4215}
Service Letter-APD
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Disassembly and Assembly
Tires &amp; Rims
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Wheels, Bearings &amp; Duo-Cone Seals
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Steering Wheel
D250E & D300E ARTICULATED TRUCKS MACHINE SYSTEMS
Service Magazine
Wheel Bearing Check And Adjustment Maintenance Interval {4208}
1996/08/12
Improved Final Drive And Wheel Group Increase Brake Disc Service Life {4255,4001}
1997/07/07
Tool For Adjusting Bearings On Wheels Improves The Accuracy Of Adjustment {4208,0767,7551}
1998/05/18
Supplement For &quot;Install Wheels, Bearings &amp; Duo Cone Seals&quot; {4208,7551,7561}
1998/05/18
Supplement To Correct Shim Thickness On Wheel Bearings {4208,7551}
1998/05/18
Supplement To Wheel Bearing Adjustment Procedure {4208,7551}
1998/05/18
Bearings Are Available for Wheels in Severe Applications {4051}
2002/05/27
Procedures for Remanufacture of the Brake Discs {4008, 4051}
2003/05/12
Revised Special Instruction, REHS0888-01, "Salvage Procedure for the Bores for the Front Suspension Mounting Pin in the Front Frame" is Available {3253, 3278, 4202, 4257, 7050, 7051, 7203}
2003/08/25
Recommendations for Differences in Tire Sizes {4203}
2007/04/02
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Disassembly and Assembly
Brake Oil Cooler
SUPPLEMENT FOR D250E & D300E ARTICULATED TRUCKS - 3306 ENGIN
Transmission Oil Cooler
SUPPLEMENT FOR D250E & D300E ARTICULATED TRUCKS - 3306 ENGIN
Service Magazine
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Letter-NACD
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Service Letter-Australia
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Service Letter-CFEL
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Service Letter-CSARL
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Service Letter-Americas
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Specifications
Final Drive and Wheel
D250E and D300E Articulated Trucks Power Train
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Letter-China
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Service Letter-Asia
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Thermal Spray Procedures for ADT Hub {0679, 4051}
Thermal Spray Procedures for ADT Hub {0679, 4051}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Disc Brake Rotor Mounting Bolts May Loosen On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Product Support Program For Brake Disc To Wheel Assembly Bolt Loosening On Certain D250E And D300E Articulated Trucks
Disassembly and Assembly
Duo-Cone Seals (Conventional &amp; Inverted)
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Final Drive Planet Carriers &amp; Ring Gears
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Wheels, Bearings &amp; Duo-Cone Seals
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Wheels, Bearings &amp; Duo-Cone Seals
D250E & D300E ARTICULATED TRUCKS POWER TRAIN
Duo-Cone Seals (Conventional &amp; Inverted)
D250E & D300E ARTICULATED TRUCKS MACHINE SYSTEMS
Service Magazine
Wheel Bearing Check And Adjustment Maintenance Interval {4208}
1996/08/12
Improved Final Drive And Wheel Group Increase Brake Disc Service Life {4255,4001}
1997/07/07
New Midshaft Bearing Assemblies Now Used To Increase Service Life {7551,3253,4056}
1997/09/01
Tool For Adjusting Bearings On Wheels Improves The Accuracy Of Adjustment {4208,0767,7551}
1998/05/18
Supplement For &quot;Install Wheels, Bearings &amp; Duo Cone Seals&quot; {4208,7551,7561}
1998/05/18
Supplement To Correct Shim Thickness On Wheel Bearings {4208,7551}
1998/05/18
Supplement To Wheel Bearing Adjustment Procedure {4208,7551}
1998/05/18
Procedure On Removal Of Cradle Mounting Pin {3278,3268,7200}
1998/08/31
Supplement To Correct Final Drive Torque Values {4092,4055}
1999/03/15
Bearings Are Available for Wheels in Severe Applications {4051}
2002/05/27
Procedures for Remanufacture of the Brake Discs {4008, 4051}
2003/05/12
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Truck sale:

Caterpillar D300E, Construction
47,000 
Caterpillar D300E, Construction
- Articulated Dump Trucks (ADTs)
YANCEY BROS. CO.
GA
 
 
CATERPILLAR D300E 1998
- ARTICULATED TRUCKS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr
 
 
CATERPILLAR D300E 1998
- ARTICULATED TRUCKS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr
 
 
CATERPILLAR D300E 1998
- ARTICULATED TRUCKS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr
CATERPILLAR D300E 1997
 
CATERPILLAR D300E 1997
- ARTICULATED TRUCKS
BLANCHARD MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.