POWER TRAIN
PUMP GPVALVE GP-RELIEF
POWER TRAIN
PUMP GP#SEBC12050010
2Q-2402: PUMP & LINES GP-AXLE OIL CLR
2Q-2402 PUMP & LINES GP-AXLE OIL CLR -CUSTOM
PIN 2ZR1-UP
PART OF 2Q-7762 KIT-AXLE OIL COOLER
PIN 2ZR1-UP
PART OF 2Q-7762 KIT-AXLE OIL COOLER
Parts for your 988F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 146-9050 | [1] | MANIFOLD | |
| 2. | 147-4467 Y | [1] | VALVE GP-RELIEF | |
| 3. | 145-2307 | [1] | PLATE | |
| 4. | 6V-8777 | [1] | TEE-FACE SEAL | |
| 5. | 146-0875 | [1] | PLATE | |
| 6. | 146-0873 | [1] | PLATE | |
| 7. | 145-2462 I | [1] | HOSE AS | |
| 8. | 145-2340 I | [1] | HOSE AS | |
| 9. | 145-2328 I | [1] | HOSE AS | |
| 10. | 151-5907 I | [1] | HOSE AS | |
| 11. | 151-5906 I | [1] | HOSE AS | |
| 12. | 151-5908 I | [1] | HOSE AS | |
| 13. | 4J-5267 | [5] | SEAL-O-RING (24.99MM ID) | |
| 14. | 1P-4576 | [10] | FLANGE | |
| 15. | 145-3997 Y | [1] | PUMP GP-GEAR | |
| 16. | 2P-1293 | [2] | LOCKNUT-BULKHEAD (1 3/16-12 THD) | |
| 17. | 6V-8724 | [3] | ELBOW-90 DEGREE (9/16-18 THD) | |
| 18. | 6V-8784 | [1] | TEE-FACE SEAL | |
| 19. | 4L-9337 | [24] | BOLT (3/8-16X1.5IN) | |
| 20. | 8T-4896 | [35] | WASHER-HARD (2.5MM THK) | |
| 21. | 6V-3965 | [1] | FITTING AS | |
| 22. | 5P-2228 | [2] | BOLT (1/2-13X1.0 IN) | |
| 23. | 8T-4223 | [2] | WASHER-HARD (3MM THK) | |
| 24. | 6V-9746 | [10] | SEAL-O-RING (18.94MM ID) | |
| 25. | 145-2338 I | [1] | HOSE AS | |
| 26. | 8T-7529 | [3] | CLIP (26.98MM ID) | |
| 27. | 3J-1907 | [4] | SEAL-O-RING (11.89MM ID) | |
| 28. | 3D-2824 | [3] | SEAL-O-RING (23.47MM ID) | |
| 29. | 7X-0291 | [2] | BOLT (3/8-16X3.75IN) | |
| 30. | 106-0378 I | [1] | HOSE AS | |
| 31. | 6V-8997 | [1] | UNION | |
| 32. | 4L-6454 | [6] | BOLT (3/8-16X1 IN) | |
| 33. | 6V-8990 | [1] | ELBOW-45 DEGREE | |
| 34. | 6V-8716 | [1] | CONNECTOR-SEAL | |
| 35. | 7M-8485 | [1] | SEAL-O-RING (29.74MM ID) | |
| 36. | 6V-0852 | [1] | CAP-DUST | |
| 37. | 091-9956 I | [1] | HOSE AS | |
| 38. | 6V-8397 | [4] | SEAL-O-RING (9.27MM ID) | |
| 39. | 8C-0569 | [1] | TEE-O-RING | |
| 40. | 5P-8112 | [1] | GROMMET | |
| 41. | 5P-7466 | [1] | CLIP (SLOT) | |
| 42. | 5P-7467 | [1] | CLIP (TAB) | |
| 43. | 6G-8299 | [1] | ELBOW | |
| 44. | 4J-0524 | [1] | SEAL-O-RING (47.22MM ID) | |
| 45. | 7X-0333 | [2] | BOLT (1/2-13X4.75IN) | |
| 46. | 8T-9391 | [2] | BOLT (1/2-13X3.75IN) | |
| 47. | 147-3806 I | [1] | HOSE AS | |
| 48. | 5P-7854 | [4] | CLIP (31.8MM ID) | |
| 49. | 2N-8998 | [2] | BRACKET | |
| 50. | 9B-7237 | [1] | BOLT (3/8-16X1.25 IN) | |
| 51. | 6V-8801 | [3] | NUT (3/8-16 THD) | |
| 52. | 7K-1181 | [9] | STRAP-CABLE (4IN DIA) | |
| 53. | 8M-2773 | [1] | CLIP (17.46MM ID) | |
| 54. | 147-3805 I | [1] | HOSE AS | |
| 55. | 3K-0360 | [1] | SEAL-O-RING (16.36MM ID) | |
| 56. | 6V-8723 | [1] | ELBOW-90 DEGREE (3/4-16 THD) | |
| 57. | 1P-4577 | [2] | FLANGE-HALF | |
| 58. | 147-3804 I | [1] | HOSE AS | |
| *****STANDARD REMOVALS***** | ||||
| 145-3996 L | [1] | PUMP GP-GEAR | ||
| 4V-8370 NI | [1] | HOSE AS | ||
| 1P-3707 P | [1] | SEAL-RECTANGULAR (54.2MM ID) | ||
| 4E-4366 PI | [1] | HOSE AS | ||
| 8T-4835 P | [2] | BOLT (1/2-13X2.0 IN) | ||
| 8T-8920 P | [2] | BOLT (1/2-13X3.25IN) | ||
| 9C-5084 P | [1] | ELBOW | ||
| 3K-0360 Q | [1] | SEAL-O-RING (16.36MM ID) | ||
| 9S-4185 Q | [1] | PLUG-O-RING (3/4-16 THD) | ||
| 3D-2824 S | [1] | SEAL-O-RING (23.47MM ID) | ||
| 6V-8637 S | [1] | CONNECTOR-SEAL | ||
| 4E-4421 TI | [1] | HOSE AS | ||
| I | SEE HOSE FABRICATION GUIDE | |||
| L | PART OF STANDARD PUMP GP-GEAR | |||
| N | PART OF STANDARD LINES GP-SERVICE BRAKE | |||
| P | PART OF STANDARD LINES GP-STEERING | |||
| Q | PART OF STANDARD TANK & FILTER GP-HYDRAULIC | |||
| S | PART OF STANDARD PUMP & LINES GP | |||
| T | PART OF STANDARD PUMP GP-SECONDARY STEERING | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC12050011
2Q-8259: PUMP & LINES GP-AXLE OIL CLR
2Q-8259 PUMP & LINES GP-AXLE OIL CLR -CUSTOM
PIN 7BR1-UP
PART OF 2Q-8161 KIT-AXLE OIL COOLER
PIN 7BR1-UP
PART OF 2Q-8161 KIT-AXLE OIL COOLER
Parts for your 988F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 152-5257 I | [1] | HOSE AS | |
| 2. | 152-5252 I | [1] | HOSE AS | |
| 3. | 155-4990 I | [1] | HOSE AS | |
| 4. | 6V-9746 | [6] | SEAL-O-RING (18.94MM ID) | |
| 5. | 155-4989 I | [1] | HOSE AS | |
| 6. | 152-5260 I | [1] | HOSE AS | |
| 7. | 152-5259 I | [1] | HOSE AS | |
| 8. | 152-5258 I | [1] | HOSE AS | |
| 9. | 152-5244 I | [1] | HOSE AS | |
| 10. | 155-4987 I | [1] | HOSE AS | |
| 11. | 152-5253 I | [1] | HOSE AS | |
| 12. | 4J-0524 | [1] | SEAL-O-RING (47.22MM ID) | |
| 13. | 3D-2824 | [2] | SEAL-O-RING (23.47MM ID) | |
| 14. | 7X-0333 | [2] | BOLT (1/2-13X4.75IN) | |
| 15. | 6V-8397 | [7] | SEAL-O-RING (9.27MM ID) | |
| 16. | 4J-5267 | [11] | SEAL-O-RING (24.99MM ID) | |
| 17. | 8T-4223 | [3] | WASHER-HARD (3MM THK) | |
| 18. | 7M-8485 | [1] | SEAL-O-RING (29.74MM ID) | |
| 19. | 8T-9391 | [2] | BOLT (1/2-13X3.75IN) | |
| 20. | 2M-9780 | [1] | SEAL-O-RING (19.18MM ID) | |
| 21. | 4L-6454 | [4] | BOLT (3/8-16X1 IN) | |
| 22. | 3J-1907 | [3] | SEAL-O-RING (11.89MM ID) | |
| 23. | 8T-7529 | [3] | CLIP (26.98MM ID) | |
| 24. | 8T-7008 | [1] | BOLT (3/8-16X3IN) | |
| 25. | 1P-4576 | [16] | FLANGE | |
| 26. | 4L-9337 | [33] | BOLT (3/8-16X1.5IN) | |
| 27. | 8T-4896 | [50] | WASHER-HARD (2.5MM THK) | |
| 28. | 7K-1181 | [2] | STRAP-CABLE (4IN DIA) | |
| 29. | 6V-8994 | [1] | UNION-BULKHEAD (11/16-16 THD) | |
| 30. | 6V-9168 | [2] | NUT (11/16-16 THD) | |
| 31. | 7X-0291 | [2] | BOLT (3/8-16X3.75IN) | |
| 32. | 146-9050 | [1] | MANIFOLD | |
| 33. | 6V-8715 | [1] | CONNECTOR-SEAL (ORFS11/16-16; PORT7/8-14) | |
| 34. | 6G-8299 | [1] | ELBOW | |
| 35. | 145-2307 | [1] | PLATE | |
| 36. | 147-4467 Y | [1] | VALVE GP-RELIEF | |
| 37. | 5P-2228 | [2] | BOLT (1/2-13X1.0 IN) | |
| 38. | 6V-8777 | [1] | TEE-FACE SEAL | |
| 39. | 6V-8716 | [1] | CONNECTOR-SEAL | |
| 40. | 6V-9007 | [1] | ELBOW-90 DEGREE (1 1/16-12 THD) | |
| 41. | 6V-9839 | [1] | TEE | |
| 42. | 6V-8801 | [5] | NUT (3/8-16 THD) | |
| 43. | 153-0482 | [1] | PUMP GP-GEAR | |
| 44. | 6V-8724 | [2] | ELBOW-90 DEGREE (9/16-18 THD) | |
| 45. | 6V-9836 | [1] | TEE-SWIVEL | |
| 46. | 6V-3965 | [1] | FITTING AS | |
| 47. | 6V-0852 | [1] | CAP-DUST | |
| 48. | 5P-7854 | [4] | CLIP (31.8MM ID) | |
| 49. | 156-4554 | [1] | ANGLE | |
| 50. | 118-9902 | [1] | SPACER | |
| 51. | 8M-2773 | [3] | CLIP (17.46MM ID) | |
| 52. | 1V-1123 | [4] | TAG-IDENTIFICATION (RET) | |
| 53. | 2N-8998 | [2] | BRACKET | |
| 54. | 1V-1122 | [4] | TAG-IDENTIFICATION (SPL) | |
| 55. | 8T-8899 | [1] | ELBOW-45 DEGREE | |
| 56. | 7X-0323 | [1] | BOLT | |
| 57. | 162-5866 | [1] | HOSE AS | |
| 58. | 163-0600 | [1] | SPACER | |
| 59. | 1P-4577 | [2] | FLANGE-HALF | |
| 60. | 5S-7382 | [4] | BOLT (3/8-16 X 1.375 IN) | |
| 61. | 4J-0520 | [1] | SEAL-O-RING (32.92MM ID) | |
| I | SEE HOSE FABRICATION GUIDE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBC12050012
179-2222: PUMP & MOTOR GP-AXLE OIL CLR
179-2222 PUMP & MOTOR GP-AXLE OIL CLR
PIN 2ZR1-UP; 7BR1-UP
PART OF 2Q-8161 KIT-AXLE OIL COOLER, 145-2320 PUMP & MTG GP-AXLE OIL COOLER
PIN 2ZR1-UP; 7BR1-UP
PART OF 2Q-8161 KIT-AXLE OIL COOLER, 145-2320 PUMP & MTG GP-AXLE OIL COOLER
Parts for your 988F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBC12050013
145-2320: PUMP & MTG GP-AXLE OIL COOLER
145-2320 PUMP & MTG GP-AXLE OIL COOLER
PIN 2ZR1-UP; 7BR1-UP
PART OF 2Q-7762, 2Q-8161 KIT-AXLE OIL COOLER
PIN 2ZR1-UP; 7BR1-UP
PART OF 2Q-7762, 2Q-8161 KIT-AXLE OIL COOLER
Parts for your 988F II WHEEL LOADER:
CATERPILLAR SIS#SEBC12050014
145-3997: PUMP GP-GEAR
Parts for your 988F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 154-6000 | [1] | FLANGE AS | |
| 2. | 154-8663 | [1] | GEAR-IDLER | |
| 3. | 154-8662 | [1] | GEAR-DRIVE (17 TEETH) | |
| 4. | 155-3167 | [2] | SEAL-LIP TYPE | |
| 5. | 2D-6648 | [1] | RING-RETAINING | |
| 6. | 6E-2943 | [1] | PLUG | |
| 7. | 154-7994 | [4] | BUSHING | |
| 8. | 6J-2386 | [10] | DOWEL | |
| 9. | 154-8654 | [1] | BODY AS | |
| 10. | 9T-7163 | [1] | COUPLING | |
| 11. | 5S-1522 | [2] | RING-SNAP | |
| 12. | 154-8655 | [1] | PLATE AS | |
| 13. | 4T-9298 | [6] | BUSHING-TERMINAL | |
| 14. | 7J-4772 | [1] | COUPLING-SPLINE | |
| 15. | 154-8661 | [1] | BODY AS | |
| 16. | 5P-7213 | [8] | WASHER-HARD (2MM THK) | |
| 17. | 154-1589 | [8] | BOLT-SOCKET HEAD | |
| 18. | 154-8665 | [1] | GEAR-DRIVE (17 TEETH) | |
| 19. | 154-8666 | [1] | GEAR-IDLER | |
| 20. | 154-8658 | [1] | PLATE AS | |
| 21. | 154-8664 | [1] | GEAR-DRIVE (17TEETH) | |
| 22. | 9T-1266 | [1] | GEAR-IDLER | |
| 23. | 9T-5360 | [1] | PLATE-PRESSURE | |
| 24. | 6E-4764 | [1] | PLATE-PRESSURE | |
| 25. | 154-8656 | [1] | BODY AS | |
| 26. | 4T-9425 | [1] | PLATE-ISOLATION | |
| 27. | [1] | PLATE-ISOLATION | ||
| 28. | 4T-8729 | [2] | PLATE-PRESSURE | |
| 29. | 137-4761 | [1] | PLATE-ISOLATION | |
| 30. | 137-4762 | [1] | PLATE-ISOLATION | |
| 31. | 154-8667 | [2] | PLATE-PRESSURE | |
| 32. | 9M-0488 | [8] | STUD-TAPERLOCK | |
| 33. | 6V-8181 | [8] | NUT-FULL | |
| AVAILABLE REPAIR KIT(S): | ||||
| 154-8668 | [1] | KIT-SEAL | ||
#SEBC12050015
147-4467: VALVE GP-RELIEF
147-4467 VALVE GP-RELIEF
PIN 2ZR1-UP; 7BR1-UP
PART OF 2Q-2402, 2Q-8259 PUMP & LINES GP-AXLE OIL CLR
PIN 2ZR1-UP; 7BR1-UP
PART OF 2Q-2402, 2Q-8259 PUMP & LINES GP-AXLE OIL CLR
Parts for your 988F II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7M-8485 | [2] | SEAL-O-RING (29.74MM ID) | |
| 2. | 4J-0522 | [1] | SEAL-O-RING (37.69MM ID) | |
| 3. | 8J-0322 | [1] | SPRING | |
| 4. | 3K-0360 | [1] | SEAL-O-RING (16.36MM ID) | |
| 5. | 4Y-5812 | [1] | PLATE | |
| 6. | 6E-5510 | [1] | RETAINER AS | |
| 7. | 9X-6395 | [1] | NUT-ORFS (3/4-16 THD) | |
| 8. | 6E-1127 | [1] | CAP | |
| 9. | 8J-0331 | [1] | VALVE | |
| 10. | 6E-6138 | [1] | VALVE GP | |
| 8H-3532 | [1] | SPRING-VALVE | ||
| 11. | 9J-7784 | [1] | DOWEL |
Information:
POWER TRAIN
PUMP GP
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-Australia
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-CFEL
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-CSARL
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-Americas
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Technical Information Bulletin
Incorrect Installation of 6V-3965 Quick Disconnect Nipple Assembly, 8C-3446 Sampling Valve, And 5P-9617 Straight Thread Adapter
Incorrect Installation of 6V-3965 Quick Disconnect Nipple Assembly, 8C-3446 Sampling Valve, And 5P-9617 Straight Thread Adapter
Incorrect Installation of 6V-3965 Quick Disconnect Nipple Assembly, 8C-3446 Sampling Valve, And 5P-9617 Straight Thread Adapter
Specifications
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Service Letter-China
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Service Letter-Asia
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Service Letter-APD
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Product Support Program For Replacing The Axle Oil Cooling Pump Motor Group On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Inspect Or Replace The Relief Valve Kit On The Axle Oil Cooling Pump On Certain 988F Wheel Loaders
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Axle Oil Cooler Pump and Motor (Frame Location) - Remove and Install
988F and 988F Series II Wheel Loaders Power Train
988F and 988F Series II Wheel Loaders Power Train
Service Magazine
New Hydraulic Pump Pressure Plates are Now Available for Certain Large Wheel Loaders, Wheel Dozers, and Compactors {5073}
New Hydraulic Pump Pressure Plates are Now Available for Certain Large Wheel Loaders, Wheel Dozers, and Compactors {5073}
New Hydraulic Pump Pressure Plates are Now Available for Certain Large Wheel Loaders, Wheel Dozers, and Compactors {5073}
Caterpillar Parts SIS Catalog 988F II :
Truck sale:
CATERPILLAR 988F II 2000
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
QUINN COMPANY
California United States
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
QUINN COMPANY
California United States



