AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G-2976 CYLINDER GP-TILT PIN 8YG1-99999; 2ZR968-UP 216 MM (9 IN) BORE X 470 MM (19 IN) STROKE. LOG FORK PART OF 4E-6327 CYLINDER & SEAL GP-TILT 988F II


HYDRAULIC SYSTEM
CYLINDER GP
HYDRAULIC GP
LINES GP-FRONT
LINES GP-CYLINDER
PUMP GP
VALVE GP-CONTROL

WHEEL LOADER 988F II WHEEL LOADER 2ZR
 2Z-9173, 2Z-9174, 2Z-9175, 2Z-9176, 2Z-9994, 2Z-9995, 2Z-9996, 2Z-9997 Handling Ars-Block Custom Product Support Literature for 988F & 988F Series II Wheel Loader 2ZR00001-UP (MACHINE) SEBC1259 988F II 2ZR   (1995)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & SEAL GP-TILT
4E-6327 CYLINDER & SEAL GP-TILT
CYLINDER GP-TILT
3G-2976 CYLINDER GP-TILT
CYLINDER GP-BLOCK HANDLING
4Z-5919 CYLINDER GP-BLOCK HANDLING
 

#SEBC12590020
 

3G-2976: CYLINDER GP-TILT

3G-2976 CYLINDER GP-TILT
PIN 8YG1-99999; 2ZR968-UP
216 MM (9 IN) BORE X 470 MM (19 IN) STROKE. LOG FORK
PART OF 4E-6327 CYLINDER & SEAL GP-TILT
i00169046 SEBC1259
3G2976 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-8734 [1] LOCKNUT (2 3/4-12 THD)  
2. 7J-8064 [1] RING-WEAR  
3. 9T-0119 [1] SEAL AS  
4. 3G-2975 [1] CYLINDER AS  
5. 1V-7036 [1] BEARING-SLEEVE  
6. 4J-6557 [1] RING  
  9M-5024 [1] SEAL-O-RING (209.14MM ID)  
7. 9T-6869 C [1] HEAD  
8. 1D-4638 [6] BOLT (1-8X3.5IN)  
9. 9M-2828 [8] WASHER-HARD (8.0MM THK)  
10. 8C-9127 [1] SEAL AS  
11. 3G-2971 C [1] ROD AS  
12. 1V-6934 C [1] BEARING-SLEEVE  
13. 8C-5219 [1] SEAL-LIP  
14. 5J-8350 [1] SEAL (88.9MM ID)  
15. 1D-4641 [2] BOLT (1-8X4.5IN)  
16. 8J-0527 [1] PISTON  
17. 8T-6746 C [1] RING-WEAR  
18. 8C-4893 [1] SEAL-HEAD (211.58MM ID)  
19. 2H-3755 [4] BOLT (5/16-18X.625IN)  
20. 7S-6369 [4] WASHER (4.8MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  1G-5928 [1] KIT-PLUNGER SEAL (INCLUDES SEALS, RINGS)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBC12590021
 

4Z-5919: CYLINDER GP-BLOCK HANDLING

4Z-5919 CYLINDER GP-BLOCK HANDLING -CUSTOM
PIN 8YG1-99999; 2ZR1088-UP
215.9 MM (8.5 IN) BORE X 722.6 MM (28.4 IN) STROKE
PART OF 2Z-9175, 2Z-9176, 2Z-9996, 2Z-9997 ATTACHMENT AR-BLOCK HANDLING
i01044960 SEBC1259
4Z5919 CYLINDER GP-BLOCK HANDLING Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4Z-5917 [1] CYLINDER AS  
2. 4J-8734 [1] LOCKNUT (2 3/4-12 THD)  
3. 8J-0527 [1] PISTON  
4. 9M-5024 [1] SEAL-O-RING (209.14MM ID)  
5. 4J-6557 [1] RING  
6. 9T-6869 [1] HEAD  
7. 4Z-5918 [1] ROD AS  
  1V-6934 [1] BEARING-SLEEVE  
8. 2H-3755 [4] BOLT (5/16X.625IN)  
9. 7S-6369 [4] WASHER (4.8MM THK)  
10. 9T-0119 [1] SEAL AS  
11. 7J-8064 [1] RING-WEAR  
12. 1D-4641 [2] BOLT (1-8X4.5IN)  
13. 9M-2828 [8] WASHER-HARD (8.0MM THK)  
14. 1D-4638 [6] BOLT (1-8X3.5IN)  
15. 8C-5219 [1] SEAL-LIP  
16. 5J-8350 [1] SEAL (88.9MM ID)  
17. 8C-9127 [1] SEAL AS  
18. 8T-6746 [1] RING-WEAR  
19. 8C-4893 [1] SEAL-HEAD (211.58MM ID)  
 

#SEBC12590022
 

4E-2300: HYDRAULIC AR

4E-2300 HYDRAULIC AR
PIN 8YG1-99999; 2ZR1088-UP
PART OF 2Z-9175, 2Z-9996 ATTACHMENT AR-BLOCK HANDLING
i00169062 SEBC1259
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4E-0360 Y [1] CONTROL GP-PILOT OPERATED HYD  
  3V-0726 Y [1] LINES GP-FRONT  
  4E-3309 Y [1] VALVE & LINES GP-HYD CONTROL  
  Y   SEPARATE ILLUSTRATION
 

#SEBC12590023
 

4E-6325: HYDRAULIC AR

4E-6325 HYDRAULIC AR
PIN 8YG1-99999; 2ZR968-UP
PART OF 2Z-9173, 2Z-9994 ATTACHMENT AR-BLOCK HANDLING
i00169153 SEBC1259
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4E-0360 Y [1] CONTROL GP-PILOT OPERATED HYD  
  4E-6327 Y [2] CYLINDER & SEAL GP-TILT  
  1V-4878 Y [1] LINES GP-FRONT  
  9U-4351 Y [1] LINES GP-TILT CYLINDER  
  6E-5853 Y [1] PUMP GP-GEAR  
  4E-3309 Y [1] VALVE & LINES GP-HYD CONTROL  
  3G-3460 Y [1] VALVE GP-MANIFOLD & RELIEF  
  Y   SEPARATE ILLUSTRATION
 

#SEBC12590024
 

1V-4878: LINES GP-FRONT

1V-4878 LINES GP-FRONT
PIN 8YG1-99999; 2ZR968-UP
PART OF 4E-6325 HYDRAULIC AR
i00169031 SEBC1259
1V4878 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-3152 [2] BAR  
2. 4L-6454 [28] BOLT (3/8-16X1.0IN)  
3. 3V-3308 [40] WASHER (2.5MM THK)  
4. 8T-4223 [8] WASHER-HARD (3MM THK)  
5. 3V-3151 [4] BAR  
6. 8K-4691 [20] CLAMP-HALF  
7. 3V-3266 [2] TUBE AS  
8. 1P-5761 [4] FLANGE-HALF  
9. 1P-3704 [2] SEAL-RECTANGULAR (38.2MM ID)  
10. 8C-6877 [8] BOLT (7/16-14X1.75IN)  
11. 8T-5360 [40] WASHER (2.5MM THK)  
12. 3V-6190 [2] TUBE AS  
13. 3K-1470 [4] SPACER  
14. 3V-3153 [1] BRACKET AS-LH  
15. 3V-3201 I [1] HOSE AS  
16. 1P-4578 [16] FLANGE  
17. 4J-0522 [8] SEAL-O-RING (37.69MM ID)  
18. 8T-8916 [32] BOLT (7/16-14X1.50IN)  
19. 5H-4020 [2] COVER  
20. 9B-7237 [4] BOLT (3/8-16X1.25IN)  
21. 3V-3203 I [1] HOSE AS  
22. 3V-3199 I [1] HOSE AS  
23. 3V-3202 I [1] HOSE AS  
24. 3V-3154 [1] BRACKET AS-RH  
25. 6V-8801 [4] NUT (3/8-16 THD)  
26. 3V-3268 [2] TUBE AS  
27. 2V-2189 [2] BAR  
28. 1P-4579 [4] FLANGE-HALF  
29. 4J-0524 [2] SEAL (47.22MM ID)  
30. 5P-2566 [8] BOLT (1/2-13X1.50IN)  
31. 4L-9337 [4] BOLT (3/8-16X1.50IN)  
32. 132-3952 [1] SHEET AS  
  I   SEE HOSE FABRICATION GUIDE
 

#SEBC12590025
 

3V-0726: LINES GP-FRONT

3V-0726 LINES GP-FRONT
PIN 8YG1-99999; 2ZR1088-UP
PART OF 4E-2300 HYDRAULIC AR
i00169048 SEBC1259
3V0726 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4579 [4] FLANGE-HALF  
2. 5P-2566 [8] BOLT (1/2-13X1.50IN)  
  8T-4223 C [8] WASHER-HARD (3MM THK)  
3. 3V-3203 I [1] HOSE AS  
4. 1P-5761 [4] FLANGE-HALF  
5. 8C-6877 [8] BOLT (7/16-14X1.75IN)  
6. 3V-3273 [2] TUBE AS  
7. 3K-1470 C [8] SPACER  
8. 4J-0524 C [2] SEAL (47.22MM ID)  
9. 4J-0522 C [8] SEAL-O-RING (37.69MM ID)  
10. 8T-8916 [32] BOLT (7/16-14X1.50IN)  
11. 8T-5360 C [40] WASHER (2.5MM THK)  
12. 1P-4578 [16] FLANGE  
13. 8K-4691 [24] CLAMP-HALF  
14. 9B-7237 [32] BOLT (3/8-16X1.25IN)  
15. 3V-3308 [44] WASHER (2.5MM THK)  
16. 2V-2189 [2] BAR  
17. 3V-3268 [2] TUBE AS  
18. 6V-8801 [4] NUT (3/8-16 THD)  
19. 3V-3153 [1] BRACKET AS-LH  
20. 3V-3152 [2] BAR  
21. 4L-6454 [8] BOLT (3/8-16X1.0IN)  
22. 3V-3201 I [1] HOSE AS  
23. 3V-3151 [4] BAR (4 HOLES)  
24. 3V-4408 [8] BAR (2 HOLES)  
25. 3V-3266 [2] TUBE AS  
26. 3V-3199 I [1] HOSE AS  
27. 3V-3154 [1] BRACKET AS-RH  
28. 3V-3202 I [1] HOSE AS  
29. 5H-4020 C [2] COVER  
30. 132-3952 [1] SHEET AS  
31. 7D-4533 [2] HANDHOLD  
32. 1P-3704 [2] SEAL-RECTANGULAR (38.2MM ID)  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
 

#SEBC12590026
 

9U-4351: LINES GP-TILT CYLINDER

9U-4351 LINES GP-TILT CYLINDER
PIN 8YG1-99999; 2ZR968-UP
PART OF 2Z-9174, 2Z-9995 ATTACHMENT AR-BLOCK HANDLING, 4E-6325 HYDRAULIC AR
i00169411 SEBC1259
9U4351 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-1030 [1] BRACKET  
2. 8T-8917 [3] BOLT (1/2-13X1.25IN)  
3. 8T-4223 [15] WASHER-HARD (3MM THK)  
4. 8R-0070 [1] MANIFOLD  
5. 4V-0799 [1] BRACKET  
6. 1P-4578 [12] FLANGE  
7. 4J-0522 [6] SEAL-O-RING (37.69MM ID)  
8. 8T-8916 [24] BOLT (7/16-14X1.50IN)  
9. 8T-5360 [26] WASHER (2.5MM THK)  
10. 1P-4577 [8] FLANGE-HALF  
11. 4J-0520 [4] SEAL-O-RING (32.92MM ID)  
12. 5S-7382 [16] BOLT (3/8-16X1.375IN)  
13. 8T-4896 [16] WASHER-HARD (2.5MM THK)  
14. 9F-2167 [2] SCREW-BLEED  
15. 4V-0798 [1] BRACKET  
16. 8B-9840 [3] SPACER  
17. 7X-0443 [2] BOLT (1-8X5.50IN)  
18. 7X-0554 [5] WASHER-HARD  
19. 7X-0313 [8] BOLT (7/16-14X2.75IN)  
20. 1P-3704 [2] SEAL-RECTANGULAR (38.2MM ID)  
21. 4V-0838 [1] TUBE AS  
22. 4E-5878 I [2] HOSE AS  
23. 8T-9380 [2] BOLT (7/16-14X1IN)  
24. 4E-5879 I [2] HOSE AS  
25. 4V-0839 [1] TUBE AS  
26. 7X-0412 [3] BOLT (1-8X4.75IN)  
27. 4E-5867 [1] BRACKET  
28. 1P-4579 [4] FLANGE-HALF  
29. 4J-0524 [2] SEAL (47.22MM ID)  
30. 5P-2566 [8] BOLT (1/2-13X1.50IN)  
31. 7X-0529 [3] WASHER-HARD (6MM THK)  
32. 8R-1033 I [2] HOSE AS  
33. 9U-3851 [1] PLATE AS  
34. 8C-4436 [4] BOLT (1/2-13X1.375IN)  
35. 6V-3965 [2] NIPPLE AS  
36. 3J-1907 [2] SEAL-O-RING (11.89MM ID)  
37. 6V-0852 [2] CAP-DUST  
  I   SEE HOSE FABRICATION GUIDE
 

#SEBC12590027
 

6E-5853: PUMP GP-GEAR

6E-5853 PUMP GP-GEAR
PIN 8YG1-99999; 2ZR968-UP
PART OF 2Z-9174, 2Z-9175, 2Z-9176, 2Z-9995, 2Z-9996, 2Z-9997 ATTACHMENT AR-BLOCK HANDLING, 4E-6325 HYDRAULIC AR
i00169257 SEBC1259
6E5853 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-2292 [1] BODY AS  
2. 107-2293 [1] BODY AS  
3. 107-2294 [1] FLANGE AS  
4. 105-9221 [1] PLATE AS  
5. 107-2295 [1] SHAFT-DRIVE  
6. 107-2296 [1] SHAFT-DRIVE  
7. 107-2297 [1] GEAR-IDLER  
8. 107-2298 [1] GEAR-IDLER  
9. 109-3950 [4] PLATE-PRESSURE  
10. 9T-3338 [2] PLATE-ISOLATION  
11. 9T-3339 [2] PLATE-ISOLATION  
12. 6J-2386 [6] DOWEL  
13. 114-1953 [1] SEAL-SHAFT  
14. 9J-4688 [1] COUPLING  
15. 2D-6648 [1] RING-RETAINING  
16. 4B-1550 [8] WASHER (1.6MM THK)  
17. 7H-3607 [8] NUT  
18. 105-9615 [8] STUD  
19. 6E-2943 [1] PLUG  
20. 9T-3427 [1] BUSHING-TERMINAL  
21. 9T-3428 [7] BUSHING-TERMINAL  
22. 5P-9597 [1] SEAL-LIP  
   
    AVAILABLE REPAIR KIT(S):
  105-9226 KIT-SEAL  
  107-2299 KIT-FRONT SECTION  
  107-2300 KIT-REAR SECTION  
 

#SEBC12590028
 

4E-3309: VALVE & LINES GP-HYD CONTROL

4E-3309 VALVE & LINES GP-HYD CONTROL
PIN 8YG1-99999; 2ZR968-UP
PART OF 4E-2300, 4E-6325 HYDRAULIC AR
i00169070 SEBC1259
4E3309 VALVE & LINES GP-HYD CONTROL Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-1483 Y [1] VALVE GP-CONTROL  
2. 5V-7714 I [1] HOSE AS  
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#SEBC12590029
 

9T-1478: VALVE GP

9T-1478 VALVE GP
PIN 8YG1-99999; 2ZR968-UP
PART OF 9T-1483 VALVE GP-CONTROL
i00169349 SEBC1259
9T1478 VALVE GP Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-8152 [1] SCREW  
2. 9J-2499 [1] SPRING (INNER)  
3. 9J-2414 [2] RETAINER  
4. 9J-2415 [1] SPRING (OUTER)  
5. 1U-0470 B [1] SHIM (.178MM THK)  
  1U-0471 B [1] SHIM (.25MM THK)  
  B   USE AS REQUIRED
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Lift Cylinders
988F & 988F SERIES II WHEEL LOADER HYDRAULIC SYSTEM
Tilt Cylinders
988F & 988F SERIES II WHEEL LOADER HYDRAULIC SYSTEM
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Tilt Cylinders
988F WHEEL LOADER MACHINE SYSTEMS
Lift Cylinders
988F WHEEL LOADER MACHINE SYSTEMS
Service Magazine
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/07/30
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 988F II :

CYLINDER & SEAL GP-TILT
4E-6327 CYLINDER & SEAL GP-TILT
CONTROL GP-PILOT OPERATED HYD
4E-0360 CONTROL GP-PILOT OPERATED HYD
COUNTERWEIGHT GP
4E-5958 COUNTERWEIGHT GP
COUNTERWEIGHT GP
2Z-9959 COUNTERWEIGHT GP
COUNTERWEIGHT GP
2Z-9483 COUNTERWEIGHT GP
VALVE GP-TRANSMISSION CONTROL
8E-6401 VALVE GP-TRANSMISSION CONTROL
VALVE GP-SOLENOID
3E-3748 VALVE GP-SOLENOID
VALVE GP-SELECTOR & PRESS CONT
8E-6404 VALVE GP-SELECTOR & PRESS CONT
CYLINDER GP-BLOCK HANDLING
4Z-5919 CYLINDER GP-BLOCK HANDLING
4E-2300 HYDRAULIC AR
4E-6325 HYDRAULIC AR
LINES GP-FRONT
1V-4878 LINES GP-FRONT
LINES GP-FRONT
3V-0726 LINES GP-FRONT
LINES GP-TILT CYLINDER
9U-4351 LINES GP-TILT CYLINDER
PUMP GP-GEAR
6E-5853 PUMP GP-GEAR
VALVE & LINES GP-HYD CONTROL
4E-3309 VALVE & LINES GP-HYD CONTROL

Truck sale:

 
 
CATERPILLAR 988F II 2000
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
QUINN COMPANY
California United States
1999 CAT 988F II
USD $65,000 
1999 CAT 988F II

Mideast Equipment Supply
South Windsor, Connecticut
CAT 988F II
 
CAT 988F II

MIDWEST INDUSTRIAL SALES INC
Gardner, Illinois
2000 CAT 988F II
Call 
2000 CAT 988F II

GESTRUCK, S.L.
CAT 988F II
 
CAT 988F II

MIDWEST INDUSTRIAL SALES INC
Gardner, Illinois
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.