165-2267 CONVERSION AR-MACHINE -CUSTOM PART OF 4Q-1777 PROTECTION AR-CORROSION 938G WHEEL LOADER

Part No	Qty	Parts name
165-1976	[1]	ANGLE
165-3516	[1]	ANGLE
165-3517	[1]	ANGLE AS
8T-3490 M	[1]	NUT-WELD (M10X1.5 THD)
165-2006	[1]	BOX AS
8T-3490 M	[2]	NUT-WELD (M10X1.5 THD)
9R-2821	[4]	BOSS
163-5194	[1]	BRACKET
165-1971	[1]	BRACKET
165-1970	[1]	BRACKET AS
8T-3612 M	[1]	NUT-WELD (M8X1.25 THD)
165-1996	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5 THD)
8T-3851 M	[1]	BOSS-WELD (M10X1.5X30MM OAL)
165-1997	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5 THD)
8T-3851 M	[1]	BOSS-WELD (M10X1.5X30MM OAL)
165-1998	[1]	BRACKET AS
8T-3612 M	[2]	NUT-WELD (M8X1.25 THD)
151-6352	[1]	BRACKET AS
8T-3612 M	[2]	NUT-WELD (M8X1.25 THD)
165-2002	[1]	BRACKET AS
165-2262	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5 THD)
165-2263	[1]	BRACKET AS
169-6643	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5 THD)
165-3515	[2]	CLIP
6D-8305	[1]	CLAMP
165-2000	[1]	CORE AS-OIL
165-2001	[7]	CORE AS-RADIATOR
163-5196	[2]	GUARD AS-FINGER
163-5198	[2]	GUARD AS-FINGER
163-5202	[1]	PIN
163-5203	[1]	PIN
165-1963	[5]	PIN AS
165-1965	[2]	PIN AS
165-1967	[2]	PIN AS
165-1969	[3]	PIN AS
169-6644	[4]	PIN AS
163-5185	[1]	PLATE
165-1972	[1]	PLATE
165-1979	[1]	PLATE
165-1985	[2]	PLATE AS
8T-3490 M	[1]	NUT-WELD (M10X1.5 THD)
165-2007	[1]	PLATE AS
6V-9632 M	[7]	NUT-WELD (M6X1 THD)
7T-1099	[1]	LINK
8T-3490 M	[1]	NUT-WELD (M10X1.5 THD)
165-3518	[1]	PLATE AS
163-5186	[1]	ROD AS
163-5199	[6]	STRAP AS
165-2004	[1]	SUPPORT AS
8T-3490 M	[2]	NUT-WELD (M10X1.5 THD)
165-2005	[1]	SUPPORT AS
8T-3490 M	[2]	NUT-WELD (M10X1.5 THD)
165-1973	[1]	TUBE AS
165-1977	[1]	TUBE AS
165-1978	[1]	TUBE AS
165-1982	[1]	TUBE AS
165-1984	[1]	TUBE AS
165-1987	[1]	TUBE AS
165-1995	[1]	TUBE AS
165-3512	[4]	TUBE AS
169-6639	[1]	TUBE AS
169-6640	[1]	TUBE AS
169-6641	[1]	TUBE AS


		***STANDARD REMOVAL***

		THE FOLLOWING ARE PART OF THE STANDARD CONTROL GP-BUCKET
4V-2588	[2]	PIN AS
4V-3619	[3]	PIN AS
8G-1098	[2]	PIN AS
131-3469	[5]	PIN-AS

		THE FOLLOWING ARE PART OF THE STANDARD DOOR GP-BATTERY
153-0150	[1]	PLATE
	[1]	ROD AS

		THE FOLLOWING IS PART OF THE STANDARD LINES GP-FUEL
146-5230	[1]	BRACKET AS

		THE FOLLOWING IS PART OF THE STANDARD WIRING GP-ENGINE
3V-0778	[1]	BRACKET

		THE FOLLOWING IS PART OF THE STANDARD MUFFLER GP
137-8869	[1]	BRACKET-MUFFLER

		THE FOLLOWING IS PART OF THE STANDARD RADIATOR GP-FAN
146-4319	[2]	GUARD AS-FINGER
146-4320	[2]	GUARD AS-FINGER

		THE FOLLOWING ARE PART OF THE STANDARD COUNTERWEIGHT GP
103-5796	[1]	PIN-KEEPER
131-5166	[1]	PIN-HITCH

		THE FOLLOWING ARE PART OF THE STANDARD LINES GP-TILT CYLINDER
104-5661	[1]	TUBE AS
104-5662	[1]	TUBE AS
104-5663	[1]	TUBE AS
111-7158	[1]	PLATE
125-7944	[1]	ANGLE

		THE FOLLOWING ARE PART OF THE STANDARD LINES GP-LIFT CYLINDER
105-2834	[2]	PLATE AS
139-5852	[1]	TUBE AS
139-5853	[1]	TUBE AS

		THE FOLLOWING IS PART OF THE STANDARD FILLER GP-POWER TRAIN OIL
149-2957	[1]	TUBE AS

		THE FOLLOWING ARE PART OF THE STANDARD LINES GP-HYDRAULIC
105-0873	[1]	BRACKET AS
105-0876	[1]	BRACKET AS
134-6741	[1]	TUBE AS

		THE FOLLOWING IS PART OF THE STANDARD PUMP GP-FUEL PRM & PRIM FILTER
151-6352	[1]	BRACKET AS

		THE FOLLOWING IS PART OF THE STANDARD CYLINDER GP-MOUNTING
8V-7659	[4]	PIN AS

		THE FOLLOWING IS PART OF THE STANDARD WIRING GP-BATTERY
147-9620	[1]	PLATE

		THE FOLLOWING IS PART OF THE STANDARD WIRING GP-MACHINE
139-8489	[1]	BRACKET AS

		THE FOLLOWING ARE PART OF THE STANDARD SUPPORT GP-AIR INLET
8R-0640		SUPPORT AS
8R-0642	[1]	SUPPORT AS

		THE FOLLOWING ARE PART OF THE STANDARD WIRING GP-RELAY PANEL
106-3226	[1]	BOX AS
136-3307	[1]	PLATE AS

		THE FOLLOWING ARE PART OF THE STANDARD WASHER GP
131-1237	[1]	BRACKET AS
137-2105	[1]	BRACKET AS

		THE FOLLOWING ARE PART OF THE STANDARD CONTROL GP-BRAKE
6D-8305	[2]	CLAMP
105-1540	[4]	TUBE AS
105-1553	[1]	ANGLE
136-8342	[1]	PLATE AS
137-2104	[1]	ANGLE AS

		THE FOLLOWING IS PART OF THE STANDARD LINES GP-PILOT
111-8685	[1]	BRACKET AS

		THE FOLLOWING IS PART OF THE STANDARD LINES GP-SECONDARY STEERING
152-5401	[1]	TUBE AS


		***ATTACHMENT REMOVALS***

		THE FOLLOWING ARE PART OF THE STANDARD RADIATOR GP
7E-7754	[6]	STRAP AS
8Q-1857	[7]	CORE AS-RADIATOR
152-5763	[1]	CORE AS-OIL COOLER

		THE FOLLOWING ARE PART OF THE STANDARD LINES GP-FRONT
139-1601	[1]	TUBE AS
139-1602	[1]	TUBE AS
M		METRIC PART

#SEBC12700002

2Q-7794: RADIATOR GP

RADIATOR GP

2Q-7794 RADIATOR GP -CUSTOM
PART OF 2Q-7795 RADIATOR GP

i01030766 SEBC1270

For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-6314	[1]	TANK AS-BOTTOM
	8T-3490 M	[4]	NUT-WELD (M10X1.5 THD)
	125-2871	[1]	CORE AS-OIL COOLER
2.	152-5763	[1]	CORE AS-OIL COOLER
3.	135-7189	[1]	CHANNEL AS-RH
	5G-6973	[2]	LUG
	8T-3490 M	[18]	NUT-WELD (M10X1.5 THD)
	8T-3597 M	[1]	NUT-WELD (M12X1.75 THD)
4.	135-7190	[1]	CHANNEL AS-LH
	5G-6973	[2]	LUG
	8T-3490 M	[14]	NUT-WELD (M10X1.5 THD)
	8T-3597 M	[1]	NUT-WELD (M12X1.75 THD)
	9R-2613	[2]	BOSS (M10X1.5X25.0MM)
	116-8688	[1]	HINGE
5A.	031-1119	[1]	CAP AS-RADIATOR
5B.	119-6286	[1]	TANK AS-TOP
6.	8Q-1857	[7]	CORE AS-RADIATOR
7.	4P-9942	[7]	SEAL-END TANK
8.	4P-9943	[7]	SEAL-END TANK
9.	7E-7754	[6]	STRAP AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5 THD)
10.	8T-4121	[40]	WASHER (2.5MM THK)
11.	8T-4136 M	[24]	BOLT (M10X1.50X25MM)
12.	8T-4137 M	[4]	BOLT (M10X1.50X20MM)
13.	8T-4196 M	[12]	BOLT (M10X1.50X35MM)
14.	5P-6903 D		SEAL (1.8 M)
	D		ORDER BY THE METER
	M		METRIC PART

#SEBC12700003

2Q-7795: RADIATOR & FAN GP

RADIATOR & FAN GP

2Q-7795 RADIATOR & FAN GP -CUSTOM

i01030662 SEBC1270

For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	2Q-7794 Y	[1]	RADIATOR GP
	Y		SEPARATE ILLUSTRATION

#SEBC12700004

2Q-7955: PRECLEANER GP

PRECLEANER GP

2Q-7955 PRECLEANER GP -CUSTOM
CANNOT BE USED WITH TRASH APPLICATION MACHINES

i01106281 SEBC1270

For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
2Q-7953	[1]	PRECLEANER AS
		***STANDARD REMOVAL***
124-3237 L	[1]	PRECLEANER AS
L		PART OF STANDARD AIR CLEANER GP

#SEBC12700005

3E-7577: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

3E-7577 ALTERNATOR GP-CHARGING
24 VOLT, 75 AMPERE
PART OF 4Q-1781, 4Q-1784 ALTERNATOR GP-CHARGING

i00188682 SEBC1270

3E7577 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9S-2011	[1]	SCREW-MACHINE
2.	1H-3244	[1]	LOCKWASHER (NO.14)
3.	2K-4821	[1]	LOCKNUT (5/8-18 THD)
4.	7F-7621	[1]	WASHER
5.	9S-2260	[1]	PLATE-COVER
6.	9S-2255	[1]	COVER
7.	9S-2262	[1]	GASKET
8.	9S-2544	[6]	SCREW-HEX HEAD
9.	9B-7233	[10]	LOCKWASHER (NO.8)
10.	9S-2437	[5]	SCREW-TAPPING
11.	8F-1434	[5]	LOCKWASHER (5MM ID)
12.	5P-3418	[1]	BEARING-ROLLER
13.	5P-3419	[1]	RACE-BEARING INNER
14.	9S-2396	[1]	BUSHING-TERMINAL
15.	9S-2393	[3]	DIODE-NEGATIVE
16.	9N-0943	[1]	PLUG-BEARING WELL
17.	9F-2247	[1]	PLUG-PIPE
18.	9S-2292 J	[1]	HEAT SINK AS
19.	100-6656	[1]	DIODE AS-ALTERNATOR
20.	9S-9830	[4]	SCREW-FORMING
21.	8C-9660	[4]	WASHER (0.8MM THK)
22.	9S-2300	[4]	INSULATOR
23.	9S-2301	[1]	INSULATION
24.	9S-2248	[1]	COIL & SUPPORT AS
25.	9N-3388	[3]	LOCKSCREW
26.	3T-6354	[1]	REGULATOR AS
27.	7N-9023	[1]	SCREW AS
28.	6N-1872	[2]	SCREW AS
29.	4B-2043	[4]	NUT (8-32 THD)
30.	100-6657	[1]	PLATE-ALTERNATOR
31.	9S-2302	[1]	ROTOR AS
32.	9S-2005	[1]	GROMMET
33.	2L-8075	[3]	TERMINAL (HORN)
34.	9S-2013	[1]	KIT-RELAY TERMINAL
			(INCL BUSHINGS, STUD, NUT AS & WASHERS)
35.	100-6658	[1]	WIRE AS-ALTERNATOR
36.	9S-2012	[1]	KIT-OUTPUT TERMINAL
			(INCL GASKETS, NUTS AS & TERMINAL)
37.	9S-2389	[1]	STUD AS
38.	9L-6770	[1]	CAP
39.	2P-5616	[1]	FRAME-DRIVE END
40.	9S-2390	[1]	RETAINER
41.	9X-2500	[4]	SCREW-HEX FLANGE
42.	9S-2009	[4]	SCREW-HEAD
43.	100-6532	[1]	COLLAR-ALTERNATOR
44.	5P-7807	[1]	BALL BEARING
45.	100-6531	[1]	FAN-ALTERNATOR
46.	9S-3451	[1]	STATOR AS
	9S-2006	[1]	INSULATOR
	9S-2005	[1]	GROMMET
	9S-2014	[3]	CLIP

			AVAILABLE REPAIR KIT(S):
	9S-2290 J	[3]	KIT-DIODE JUNCTION STUD
			(INCL INSULATOR & STUD)
	9S-2291 J	[3]	KIT-POSITIVE DIODE
			(INCL DIODE)

#SEBC12700006

4Q-1781: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

4Q-1781 ALTERNATOR GP-CHARGING -CUSTOM
BRUSHLESS 70 AMPS
FOR USE WITH LANDFILL AND CORROSIVE ATMOSPHERE APPLICATIONS, LOW SOUND AND WASTE AR

i01106145 SEBC1270

For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
3E-7577 Y	[1]	ALTERNATOR GP-CHARGING
172-9868 Y	[1]	ALTERNATOR GP-CHARGING
1W-0380	[1]	ROD
		***ATTACHMENT REMOVAL***
153-4847 J	[1]	ALTERNATOR GP-CHARGING
		***CONSIST REMOVAL***
107-7977 L	[1]	ALTERNATOR GP-CHARGING
4R-1419 L	[1]	ROD
J		PART OF STANDARD CONVERSION AR-ENVIRONMENTAL
L		PART OF STANDARD ALTERNATOR GP
R		REMFG PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBC12700007

4Q-1784: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

4Q-1784 ALTERNATOR GP-CHARGING -CUSTOM
BRUSHLESS 70 AMPS
FOR USE WITH LANDFILL AND CORROSIVE ATMOSPHERE APPLICATIONS, STANDARD MACHINE

i01106088 SEBC1270

For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
3E-7577 Y	[1]	ALTERNATOR GP-CHARGING
172-9868 Y	[1]	ALTERNATOR GP-CHARGING
163-5248	[1]	PULLEY
9Y-9176 J	[1]	PULLEY-CRANKSHAFT
1W-0380	[1]	ROD
Y	[1]	WIRING GP-ENGINE
		****STANDARD REMOVALS***
162-9489 L	[1]	ALTERNATOR GP-CHARGING
7C-0044 P	[1]	DRIVE GP-FAN
4P-2843 J	[1]	PULLEY
166-9269 L	[1]	PULLEY GP-FAN & ALT DRIVE
134-9644 N	[1]	WIRING GP-ENGINE
		***CONSIST REMOVALS***
107-7977 Q	[1]	ALTERNATOR GP-CHARGING
4P-7051 Q	[1]	PULLEY-ALTERNATOR
4R-1419 Q	[1]	ROD
J		PART OF STANDARD DAMPER GP
L		PART OF STANDARD INSTALLATION AR
N		PART OF STANDARD CHASSIS AR
P		PART OF STANDARD ENGINE AR-BASIC
Q		PART OF STANDARD ALTERNATOR GP-LOW SOUND
R		REMFG PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBC12700008

107-7977: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

107-7977 ALTERNATOR GP-CHARGING
24 VOLT, 70 AMPERE
PART OF 172-9868 ALTERNATOR GP-CHARGING

i00189369 SEBC1270

1077977 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1H-3244	[2]	LOCKWASHER (NO.14)
2.	6V-8187	[1]	NUT (1/4-28 THD)
3.	8T-4205	[2]	WASHER-HARD (2MM THK)
4.	3T-6354	[1]	REGULATOR AS
5.	9L-6770	[1]	CAP
6.	2K-4821	[1]	LOCKNUT (5/8-18 THD)
7.	7F-7621	[1]	WASHER
8.	4B-2047	[1]	NUT (10-24 THD)
9.	8T-0328	[1]	WASHER-HARD (1MM THK)
10.	8F-1434	[1]	LOCKWASHER (5MM ID)
11.	3E-5450	[1]	COVER
12.	4B-2043	[4]	NUT (8-32 THD)
13.	9B-7233	[4]	LOCKWASHER (NO.8)
14.	3E-5448	[1]	CONNECTOR
15.	3E-5446	[1]	CONNECTOR
16.	3E-5457	[1]	DIODE AS
17.	132-1225	[1]	RECTIFIER AS-ALTERNATOR
18.	7N-9023	[3]	SCREW AS
19.	3E-5460	[1]	HOLDER AS
20.	3E-5459	[2]	BRUSH AS
21.	3N-3718	[2]	SCREW AS
22.	3E-5458	[1]	CAPACITOR AS
23.	4M-5281	[1]	BOLT (1/4-20X.750IN)
24.	3E-5454	[1]	FAN-ALTERNATOR
25.	3E-5455	[1]	HOUSING
26.	5P-7807	[1]	BALL BEARING
27.	3E-5447	[1]	PLATE
28.	030-9612	[3]	SCREW-FORMING
29.	132-1222	[1]	ROTOR AS-ALTERNATOR
30.	132-1223	[1]	STATOR AS-ALTERNATOR
31.	132-1224	[1]	FRAME AS-ALTERNATOR
32.	5P-6920	[1]	BEARING-ROLLER
33.	132-1228	[1]	KIT-ALTERNATOR TERMINAL
34.	132-1229	[1]	KIT-ALTERNATOR TERMINAL
35.	132-1230	[1]	KIT-ALTERNATOR TERMINAL

#SEBC12700009

172-9868: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

172-9868 ALTERNATOR GP-CHARGING -CUSTOM
PART OF 4Q-1781, 4Q-1784 ALTERNATOR GP-CHARGING

i01071376 SEBC1270

1729868 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 938G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4R-1419	[1]	ROD
2.	8S-5383	[1]	BLOCK
4.	107-7977 Y	[1]	ALTERNATOR GP-CHARGING
5.	108-7882	[1]	WIRE AS
	5P-5675 D		WIRE (6 GA)
	2L-8050	[1]	TERMINAL (6 GAUGE, 6.4MM)
	2L-8058	[1]	TERMINAL
	2L-8051	[1]	TERMINAL (FOR 5/16IN BOLT)
6.	8T-4835	[1]	BOLT (1/2X2.0 IN)
7.	172-9869	[1]	BRACKET AS
8.	115-4237	[1]	PULLEY-IDLER
9.	1W-9693	[1]	V-BELT
10.	2L-8509	[1]	LOCKRING
11.	4P-7051	[1]	PULLEY-ALTERNATOR
12.	6Y-5758	[1]	SPACER
13.	7X-0338	[1]	BOLT (1/2-13X6IN)
14.	7X-0449	[2]	NUT-FULL (7/8-9 THD)
15.	8T-4121	[5]	WASHER (2.5MM THK)
16.	8T-4186 M	[1]	BOLT (M10X1.50X40MM)
17.	8T-4195 M	[4]	BOLT (M10X1.50X30MM)
18.	8T-4223	[2]	WASHER-HARD (3MM THK)
	D		ORDER BY THE METER
	M		METRIC PART
	R		REMFG PART MAY BE AVAILABLE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

MACHINE ARRANGEMENT

MACHINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Special Instruction

Corrosion Protection Package for Wheel Loaders{0645, 7000, 7559}
Corrosion Protection Package for Wheel Loaders{0645, 7000, 7559}

PreDelivery Inspection of Medium Wheel Loaders{7000}
PreDelivery Inspection of Medium Wheel Loaders{7000}

General Welding Procedures {0679, 7000}
General Welding Procedures {0679, 7000}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of G610 Hardware for Cat^® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}

Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat^® and Non-Cat Equipment {4203, 7490}

Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat^® and Non-Cat Equipment {7606}

Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat^® and Non-Cat Products {7600, 7610, 7620}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN INTEGRATED TOOLCARRIERS AND WHEEL LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

European Union Directive 95/27/EC, External Dynamic Sound
European Union Directive 95/27/EC, External Dynamic Sound

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

Tool Operating Manual

439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

Service Intervals
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Service Letter-APD

Technical Analysis

938G Wheel Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
938G Wheel Loader TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}

Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565}

Service Magazine

Revised Lubrication And Maintenance Interval Decal, SEEU7037-02, Now Available {0374,0653,7000}
1998/04/27

Revised Walk-Around Inspection Chart, SELU7037-02, Now Available{0374,7000}
1998/05/04

Special Instruction, REHS1332, "Predelivery Inspection of Medium Wheel Loaders" is Available {7000}
2002/10/07

Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 938G :

2Q-7794 RADIATOR GP

2Q-7795 RADIATOR & FAN GP

2Q-7955 PRECLEANER GP

3E-7577 ALTERNATOR GP-CHARGING

4Q-1781 ALTERNATOR GP-CHARGING

4Q-1784 ALTERNATOR GP-CHARGING

107-7977 ALTERNATOR GP-CHARGING

172-9868 ALTERNATOR GP-CHARGING

Truck sale:

Caterpillar 938G
- Wheel Loaders
FINANZAUTO S.A.

Caterpillar 938G, forks, Construction
- forks
HOLT CAT

42,748

Caterpillar 938 G, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR ROMANIA

32,500

Caterpillar 938G, Wheel Loaders, Construction

29,255

Caterpillar 938G, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA