AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

Protection Ar-Corrosion Custom Product Support Literature for 950G and 962G Wheel Loaders 2JS00001-UP (MACHINE) ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



WHEEL LOADER 950G WHEEL LOADER 2JS
 Protection Ar-Corrosion Custom Product Support Literature for 950G and 962G Wheel Loaders 2JS00001-UP (MACHINE) SEBC1271 950G 2JS   (1997)

Parts group 950G:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
3E-7577 ALTERNATOR GP-CHARGING
3E-7577 ALTERNATOR GP-CHARGING
24 VOLT, 75 AMPERE
PART OF 4Q-1781, 4Q-1783 ALTERNATOR GP-CHARGING
4Q-1781 ALTERNATOR GP-CHARGING
4Q-1781 ALTERNATOR GP-CHARGING -CUSTOM
BRUSHLESS 70 AMPS
FOR USE WITH LANDFILL AND CORROSIVE ATMOSPHERE APPLICATIONS, LOW SOUND AND WASTE AR
4Q-1783 ALTERNATOR GP-CHARGING
4Q-1783 ALTERNATOR GP-CHARGING -CUSTOM
BRUSHLESS 70 AMPS
FOR USE WITH LANDFILL AND CORROSIVE ATMOSPHERE APPLICATIONS, STANDARD MACHINE
ALTERNATOR GP-CHARGING
107-7977 ALTERNATOR GP-CHARGING
107-7977 ALTERNATOR GP-CHARGING
24 VOLT, 70 AMPERE
PART OF 172-9868 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
172-9868 ALTERNATOR GP-CHARGING
172-9868 ALTERNATOR GP-CHARGING -CUSTOM
PIN 2JS1-940; 3BS1-604; 5FW1-1270; 7BW1-534
PART OF 4Q-1781, 4Q-1783 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
172-9868 ALTERNATOR GP-CHARGING
172-9868 ALTERNATOR GP-CHARGING -CUSTOM
PIN 2JS941-UP; 3BS605-UP; 5FW1271-UP
PART OF 4Q-1781, 4Q-1783 ALTERNATOR GP-CHARGING
SENSOR GP
SENSOR GP-TEMPERATURE
131-0427 SENSOR GP-TEMPERATURE
131-0427 SENSOR GP-TEMPERATURE -ENGINE COOLANT
PART OF 153-4848 WIRING GP-ENGINE
WIRING GP
145-0643 WIRING GP-AUTOLUBE
145-0643 WIRING GP-AUTOLUBE -CUSTOM
PART OF 4Q-1782 LUBRICATION AR-AUTOMATIC, 4Q-1792 LUBRICATION GP-AUTOMATIC
153-4848 WIRING GP-ENGINE
153-4848 WIRING GP-ENGINE
PART OF 4Q-1783 ALTERNATOR GP-CHARGING

Information:

(For parts list, see above)

Special Instruction
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406}
Installation of 262-6141 Alarm Gp {7406}
Troubleshooting
MID 030 - CID 0271 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0271 - FMI 05
Caterpillar Monitoring System
MID 030 - CID 0271 - FMI 06
Caterpillar Monitoring System
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Service Letter-NACD
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
Product Support Program For Updating The Alternator And Air Conditioning Belt Drives On Certain IT38G Tool Carriers; 938G, 950G, And 962G Wheel Loaders
Product Support Program For Updating The Alternator And Air Conditioning Belt Drives On Certain IT38G Tool Carriers; 938G, 950G, And 962G Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
Service Letter-Australia
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
Service Letter-CFEL
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
Service Letter-CSARL
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
Service Letter-Americas
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
Technical Information Bulletin
Reman Alternator Failures {1405}
Reman Alternator Failures {1405}
Specifications
Alternators And Regulators
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Alternator Mounting Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Alternator
Alternator - Delco 21SI
Alternator
Alternator - Delco 27SI
Service Letter-China
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
Service Letter-Asia
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
Systems Operation
General Information
Alternator - Delco 21SI
Component Description
Alternator - Delco 21SI
Normal Operation
Alternator - Delco 21SI
General Information
Alternator - Delco 27SI
Normal Operation
Alternator - Delco 27SI
Component Description
Alternator - Delco 27SI
Service Letter-APD
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
Product Support Program For Updating Alternator And Air Conditioning Belt Drives On Certain IT38G And IT62G Toolcarriers; 938G, 950G, And 962G Wheel Loaders
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING ALTERNATOR AND AIR CONDITINING BELT DRIVES ON CERTAIN IT38G TOOL CARRIERS, 962G PARALLEL LIFT, 938G, 950G AND 962G WHEEL LOADERS
Testing and Adjusting
CID 0168 FMI 00 Electrical System Voltage Above Normal Range - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Troubleshooting Starting System
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0168 FMI 00 Electrical System Voltage Above Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Capacitor - Test
Alternator - Delco 21SI
Charging System - Test
3114, 3116, and 3126 Engines
Diode Assembly - Test
Alternator - Delco 21SI
Brush Length - Check
Alternator - Delco 27SI
Field Winding - Test
Alternator - Delco 21SI
Insulated Screw - Check
Alternator - Delco 21SI
Rectifier - Test
Alternator - Delco 21SI
Regulator - Test
Alternator - Delco 21SI
Stator - Test
Alternator - Delco 21SI
Residual Magnetism - Restore
Alternator - Delco 21SI
Regulator - Test
Alternator - Delco 27SI
Field Winding - Test
Alternator - Delco 27SI
Stator - Test
Alternator - Delco 27SI
Diode Assembly - Test
Alternator - Delco 27SI
Rectifier - Test
Alternator - Delco 27SI
Insulated Screw - Check
Alternator - Delco 27SI
Residual Magnetism - Restore
Alternator - Delco 27SI
Capacitor - Test
Alternator - Delco 27SI
Troubleshooting
General Information
Alternator - Delco 21SI
Charging System
Alternator - Delco 21SI
Charging System
Caterpillar Monitoring System
MID 124 - CID 0168 - FMI 00
Machine Security System
MID 124 - CID 0168 - FMI 01
Machine Security System
General Information
Alternator - Delco 27SI
Alternator
Alternator - Delco 27SI
MID 122 - CID 0168 - FMI 00
Product Link 151/201
MID 122 - CID 0168 - FMI 01
Product Link 151/201
MID 122 - CID 1251 - FMI 03
Product Link 151/201
MID 074 - CID 0168 - FMI 00
Payload Control System (PCS) 2.X
MID 074 - CID 0168 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0168 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0168 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Disassembly and Assembly
Alternator - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Alternator - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Alternator - Disassemble
Alternator - Delco 21SI
Alternator - Assemble
Alternator - Delco 21SI
Alternator - Disassemble
Alternator - Delco 27SI
Alternator - Assemble
Alternator - Delco 27SI
Service Magazine
Improved Alternator Groups Now Available{1405}
1998/05/04
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Engine News
Operation and Maintenance Manual
Battery or Battery Cable - Inspect/Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Battery - Recycle
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Battery - Clean
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Battery Hold-Down - Tighten
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Technical Information Bulletin
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Specifications
Fuel Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Oil Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Transmission Oil Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Coolant Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Speed Sensor (Magnetic)
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Testing and Adjusting
CID 0168 FMI 00 Electrical System Voltage Above Normal Range - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0168 FMI 00 Electrical System Voltage Above Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Battery - Test
3114, 3116, and 3126 Engines
Troubleshooting
Charging System
Caterpillar Monitoring System
MID 124 - CID 0168 - FMI 00
Machine Security System
MID 124 - CID 0168 - FMI 01
Machine Security System
MID 122 - CID 0168 - FMI 00
Product Link 151/201
MID 122 - CID 0168 - FMI 01
Product Link 151/201
MID 122 - CID 1251 - FMI 03
Product Link 151/201
MID 074 - CID 0168 - FMI 00
Payload Control System (PCS) 2.X
MID 074 - CID 0168 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0168 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0168 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Electrical Power Supply - Test
MSS3s Machine Security System
Service Magazine
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
New Battery Is Now Used as a Service Replacement for Certain Cat<SUP>&reg;</SUP> Products {1401, 1926}
2014/04/24
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Special Instruction
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Technical Information Bulletin
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
Effectivity Of Product Support Literature For Caterpillar Monitoring System {0374,7490}
1999/09/20
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620}
2014/02/06
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
A New Handheld Digital Manometer is Now Available {7490}
A New Handheld Digital Manometer is Now Available {7490}
Truck Engine News
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04
Engine News
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/01
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/03/28
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Welding on Machines and Engines with Electronic Controls
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Technical Information Bulletin
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
Service Magazine
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
Download Flash Files By Using The Caterpillar Service Information System (SIS) Or SIS Web {1901, 7620}
2000/01/10
Subscriptions For Caterpillar Electronic Technician (ET) Software {7620}
2000/03/13
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
A New Electronic Controller for the Air Inlet Heater Improves the Engine Starting Ability {1090}
2004/02/16
New Test ECM Available for Machines {0785, 7610}
2004/11/08
New Factory Password System for Caterpillar Engines {1000, 1900}
2005/03/07
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Operation and Maintenance Manual
Welding on Machines and Engines with Electronic Controls
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Installation Instructions for the Retrofit Kit for the Integrated Braking System for CCS Equipped Machines{4800, 7610}
Installation Instructions for the Retrofit Kit for the Integrated Braking System for CCS Equipped Machines{4800, 7610}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Technical Information Bulletin
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
New Software Corrects Calibration Failures
New Software Corrects Calibration Failures
Flashing Transmission Software May Result in Error Message On Certain Wheel Loaders{7620}
Flashing Transmission Software May Result in Error Message On Certain Wheel Loaders{7620}
Specifications
Pinout Specifications for Electronic Control (Power Train)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Systems Operation
General Information - Machines Without Integrated Braking System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Electronic Control Module (Power Train) - Machines without Integrated Braking System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
CAT Data Link
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Sensors
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Switches
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Power Train Electronic Control System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Auto Shift Control - Machines with Integrated Braking System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Auto Shift Control - Machines without Integrated Braking System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
General Information - Machines with Integrated Braking System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Electronic Control Module (Power Train) - Machines with Integrated Braking System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Variable Shift Control
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Integrated Braking System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Testing and Adjusting
Electrical General Information
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Troubleshooting Diagnostic Codes
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Electrical Components And Connector Locations
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Using Caterpillar Monitoring System to Determine Diagnostic Codes
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Glossary of Electrical Terms
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
System Schematic
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0041 FMI 03 Sensor Power Supply Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0041 FMI 04 Sensor Power Supply Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Electrical Service Tools
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Electronic Control Module (Power Train) - Replace
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Using Caterpillar Electronic Technician (ET) to Determine Diagnostic Codes
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Electrical Connector - Inspect
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Secondary Steering - Program
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Ride Control Configuration - Program
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Forward High Speed Lockout - Program
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Reverse High Speed Lockout - Program
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Calibration and Programming
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Air Inlet Heater - Program
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Electronic Control Module (Power Train) - Flash Program
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Forward and Reverse Speed - Program
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Electrical Connector - Inspect
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Service Magazine
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
New Software Allows Automatic Downshifting to First Gear {7620}
2000/04/10
New Software for the Power Train No Longer Requires Intermediate Speed Sensors {7620}
2000/11/13
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
New Software is Available for Machines that are Equipped with the Integrated Braking System {7620}
2003/01/27
New Test ECM Available for Machines {0785, 7610}
2004/11/08
New Test ECM Available for MAC 14 Drive Train {7610}
2004/10/11
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Operation and Maintenance Manual
Welding on Machines and Engines with Electronic Controls
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Definitions Of Configuration/Calibration Sections For Medium Wheel Loaders Equipped With Electrohydraulic Controls{7610}
Definitions Of Configuration/Calibration Sections For Medium Wheel Loaders Equipped With Electrohydraulic Controls{7610}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Technical Information Bulletin
A Nuisance Mid 82 CID 358 FMI 05 Service Code May Be Logged By The Implement Electronic Control Module
A Nuisance Mid 82 CID 358 FMI 05 Service Code May Be Logged By The Implement Electronic Control Module
Specifications
Implement Electronic Control Pinout Specifications
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Hydraulic System
Systems Operation
Electronic Control Module (Implement)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Options Code Plug
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Sensors
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Solenoid Valves (Implement)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Detent Coils (Control Lever)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Data Link
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Monitoring System (Hydraulic Functions)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Normal Operation
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Diagnostic Operation
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Switches
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Sensors - Payload Control System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Testing and Adjusting
Electrical Components And Connector Locations
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Electrical General Information
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Electrical Service Tools
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Electrical Connector - Inspect
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Troubleshooting Diagnostic Codes
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Using Caterpillar Monitoring System to Determine Diagnostic Codes
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Using Caterpillar Electronic Technician (ET) to Determine Diagnostic Codes
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Position Sensor (Lift Linkage) - Adjust
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Glossary of Electrical Terms
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0168 FMI 00 Electrical System Voltage Above Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0248 FMI 12 CAT Data Link Failed - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0270 FMI 02 Caterpillar Monitoring System Harness Code Incorrect - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0270 FMI 09 Caterpillar Monitoring System Harness Code Abnormal Update - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0296 FMI 09 Power Train Electronic Control Module Abnormal Update - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0296 FMI 11 Power Train Electronic Control Module Failure Mode Not Identifiable - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0350 FMI 00 Position Sensor (Lift Linkage) Above Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0350 FMI 01 Position Sensor (Lift Linkage) Below Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0350 FMI 02 Position Sensor (Lift Linkage) Incorrect Signal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0350 FMI 13 Position Sensor (Lift Linkage) Out of Calibration - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0352 FMI 00 Position Sensor (Lift Lever) Above Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0353 FMI 00 Position Sensor (Tilt Lever) Above Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0487 FMI 00 Position Sensor (Auxiliary Lever) Above Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0352 FMI 01 Position Sensor (Lift Lever) Below Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0353 FMI 01 Position Sensor (Tilt Lever) Below Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0487 FMI 01 Position Sensor (Auxiliary Lever) Below Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0352 FMI 13 Position Sensor (Lift Lever) Out of Calibration - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0353 FMI 13 Position Sensor (Tilt Lever) Out of Calibration - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0487 FMI 13 Position Sensor (Auxiliary Lever) Out of Calibration - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0354 FMI 03 Solenoid Valve (Lift Linkage Raise) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0355 FMI 03 Solenoid Valve (Lift Linkage Lower) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0356 FMI 03 Solenoid Valve (Tilt Linkage Dump) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0357 FMI 03 Solenoid Valve (Tilt Linkage Tilt Back) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0491 FMI 03 Solenoid Valve (Auxiliary Lever Forward) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0492 FMI 03 Solenoid Valve (Auxiliary Lever Rearward) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0358 FMI 03 Solenoid Valve (Pilot Pressure Supply) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0359 FMI 03 Detent Coil (Lift Lever Raise) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0360 FMI 03 Detent Coil (Lift Lever Lower) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0361 FMI 03 Detent Coil (Tilt Lever Tilt Back) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0354 FMI 05 Solenoid Valve (Lift Linkage Raise) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0358 FMI 05 Solenoid Valve (Pilot Pressure Supply) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0359 FMI 05 Detent Coil (Lift Lever Raise) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0360 FMI 05 Detent Coil (Lift Lever Lower) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0361 FMI 05 Detent Coil (Tilt Lever Tilt Back) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0358 FMI 06 Solenoid Valve (Pilot Pressure Supply) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0355 FMI 05 Solenoid Valve (Lift Linkage Lower) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0356 FMI 05 Solenoid Valve (Tilt Linkage Dump) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0357 FMI 05 Solenoid Valve (Tilt Linkage Tilt Back) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0359 FMI 06 Detent Coil (Lift Lever Raise) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0360 FMI 06 Detent Coil (Lift Lever Lower) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0361 FMI 06 Detent Coil (Tilt Lever Tilt Back) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0365 FMI 04 Switch (Kickout Set) Voltage Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0491 FMI 05 Solenoid Valve (Auxiliary Lever Forward) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0492 FMI 05 Solenoid Valve (Auxiliary Lever Rearward) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0354 FMI 06 Solenoid Valve (Lift Linkage Raise) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0355 FMI 06 Solenoid Valve (Lift Linkage Lower) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0356 FMI 06 Solenoid Valve (Tilt Linkage Dump) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0357 FMI 06 Solenoid Valve (Tilt Linkage Tilt Back) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0491 FMI 06 Solenoid Valve (Auxiliary Lever Forward) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0492 FMI 06 Solenoid Valve (Auxiliary Lever Rearward) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0489 FMI 04 Rocker Switch (Implement Function Selector) Voltage Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0365 FMI 05 Switch (Kickout Set) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0490 FMI 04 Switch (Implement Lockout) Voltage Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0687 FMI 02 Options Code Incorrect - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0489 FMI 05 Rocker Switch (Implement Function Selector) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Bucket Kickout - Troubleshoot
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0490 FMI 05 Switch (Implement Lockout) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
System Schematic
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0354 FMI 12 Solenoid Valve (Lift Linkage Raise) Failed - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0355 FMI 12 Solenoid Valve (Lift Linkage Lower) Failed - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0356 FMI 12 Solenoid Valve (Tilt Linkage Dump) Failed - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0357 FMI 12 Solenoid Valve (Tilt Linkage Tilt Back) Failed - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0491 FMI 12 Solenoid Valve (Auxiliary Lever Forward) Failed - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0492 FMI 12 Solenoid Valve (Auxiliary Lever Rearward) Failed - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0350 FMI 08 Position Sensor (Lift Linkage) Abnormal Signal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0596 FMI 02 Electronic Control Module (Implement) Incorrect Signal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Electronic Control Module (Implement) - Replace
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Maximum Modulation Current to Solenoid Valves - Calibrate
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Start of Modulation Current to Solenoid Valves - Calibrate
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Service Magazine
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
An Explanation of the CID 1393 Diagnostic Code for Machines that are Equipped with Electro-Hydraulic Implement Controls {7610}
2001/05/07
New Test ECM Available for Machines {0785, 7610}
2004/11/08
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Installation Instructions of the Machine Security System on Medium Wheel Loaders{7631}
Installation Instructions of the Machine Security System on Medium Wheel Loaders{7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Systems Operation
Operation of Status Indicator
Machine Security System
Protected Functions
Machine Security System
Diagnostic Operation
Machine Security System
Events
Machine Security System
Service Operation Using Machine Security System
Machine Security System
Key Information
Machine Security System
Service Operation Using Service Tool
Machine Security System
Electronic Control Module (ECM)
Machine Security System
System Overview
Machine Security System
Scheduled Access - "Security System Bypass Times"
Machine Security System
General Information
Machine Security System
Normal Operation
Machine Security System
System Components
Machine Security System
Cat Data Link
Machine Security System
General Information
MSS3s Machine Security System
System Overview
MSS3s Machine Security System
Normal Operation
MSS3s Machine Security System
Operation of Status Indicator
MSS3s Machine Security System
Key Information
MSS3s Machine Security System
Scheduled Access - "Security System Bypass Times"
MSS3s Machine Security System
Diagnostic Operation
MSS3s Machine Security System
Events
MSS3s Machine Security System
Protected Functions
MSS3s Machine Security System
Service Operation Using Machine Security System
MSS3s Machine Security System
Service Operation Using Service Tool
MSS3s Machine Security System
Electronic Control Module (ECM)
MSS3s Machine Security System
System Components
MSS3s Machine Security System
Data Links
MSS3s Machine Security System
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Testing and Adjusting
Glossary of Terms
Machine Security System
Key - Program
Machine Security System
System Disarm - Program - Security System Bypass
Machine Security System
General Information
Machine Security System
Electronic Control Module (ECM) - Replace
Machine Security System
Software - Uninstall - "Immobilizer" Feature
Machine Security System
Time - Set
Machine Security System
Product Identification Number - Program
Machine Security System
Electronic Control Module (ECM) - Flash Program
Machine Security System
Factory Password - Obtain
Machine Security System
General Information
MSS3s Machine Security System
Product Identification Number - Program
MSS3s Machine Security System
Key - Program
MSS3s Machine Security System
System Disarm - Program - Security System Bypass
MSS3s Machine Security System
Factory Password - Obtain
MSS3s Machine Security System
Time - Set
MSS3s Machine Security System
Glossary of Terms
MSS3s Machine Security System
Software - Uninstall - "Immobilizer" Feature
MSS3s Machine Security System
Troubleshooting
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Machine Security System
Lost Key
Machine Security System
Diagnostic Code List
Machine Security System
General Information
Machine Security System
Engine Does Not Crank and Status Indicator Is Green
Machine Security System
Engine Does Not Start and Status Indicator Is Continuously Red
Machine Security System
MID 124 - CID 0248 - FMI 12
Machine Security System
MID 124 - CID 0817 - FMI 04
Machine Security System
MID 124 - CID 1391 - FMI 03
Machine Security System
MID 124 - CID 1391 - FMI 04
Machine Security System
MID 124 - CID 1392 - FMI 03
Machine Security System
MID 124 - CID 1392 - FMI 04
Machine Security System
Lost Key (MSS)
MSS3s Machine Security System
Engine Does Not Crank and Status Indicator Is Green
MSS3s Machine Security System
Engine Does Not Start and Status Indicator Is Continuously Red
MSS3s Machine Security System
ECM Output Driver - Test
MSS3s Machine Security System
ECM Software - Install
MSS3s Machine Security System
ECM - Replace
MSS3s Machine Security System
ECM - Configure
MSS3s Machine Security System
Service Magazine
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Flash Software Now Available For Wheel Loader Payload Control System (PCS) {7620,7494}
1999/08/09
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631}
2001/04/09
Prerequisites for Flashing Software into Machine Electronic Control Modules {7620}
2011/10/06
Test Harness for Machine Electronic Control Modules (ECM) {1408, 7610}
2002/05/13
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Testing and Adjusting
Electronic Control Module (ECM) - Replace
Machine Security System
Electronic Control Module (ECM) - Flash Program
Machine Security System
Service Magazine
Prerequisites for Flashing Software into Machine Electronic Control Modules {7620}
2011/10/06
New Software is Available for Machines that are Equipped with the Integrated Braking System {7620}
2003/01/27
A New 24 Volt to 12 Volt Converter Group Is Available {1421}
2001/05/21
Technical Information Bulletin
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Service Magazine
Improved Alternator Groups Now Available{1405}
1998/05/04
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat<SUP>&reg;</SUP> Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Correction to Service Magazine, &quot;Improved 24 Volt Horns Available&quot; {7402}
2001/12/17
Special Instruction
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Service Magazine
Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606}
2006/11/13
Special Instruction
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Service Magazine
Correction to the Directional Turn Signal and Hazard Flasher Control in the Operation and Maintenance Manual {1429, 7332, 7451}
2000/08/14
Stoplights and Taillights Use New Signal Lamp {1432}
2001/05/07
Update to the Testing and Adjusting , "Limit Switch (Stop Light) - Adjust" {1432, 1435, 4269}
2009/03/02
A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
2011/06/29
Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
2000/10/30
The Length of the Wires Leading to the Wiper Motor Have Been Lengthened to Improve Reliability {5927, 7305}
2005/12/19
An Improved Starting Motor is Now Available {1453}
2007/10/15
An Improved Motor For The Air Conditioning Condenser Is Now Available {1805, 1815, 5927, 7320}
2009/09/14
A New Starter Solenoid is Now Available {1467}
2008/03/17
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Technical Information Bulletin
Electrical Problems And Malfunctions
Electrical Problems And Malfunctions
Operation and Maintenance Manual
Engine Starting with Auxiliary Start Receptacle
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Service Magazine
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Specifications
Speed Sensor (Magnetic)
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Temperature Sender (Hydraulic Oil)
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Hydraulic System
Systems Operation
Senders
Caterpillar Monitoring System
Troubleshooting
MID 030 - CID 0096 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0600 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0600 - FMI 08
Caterpillar Monitoring System
Temperature Sender
Caterpillar Monitoring System
Fuel Level Sender
Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0600 - FMI 03
Caterpillar Monitoring System
Service Magazine
Field Returns of 4W-9972 Temperature Senders Are Necessary for Failure Analysis {1906}
2000/11/13
Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2010/10/25
Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
Specifications
Transmission Oil Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Coolant Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Speed Sensor (Magnetic)
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Speed Sensor (Transmission Output)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Temperature Sensor (Transmission Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Speed Sensor (Torque Converter Output)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Position Sensor (Left Brake Pedal)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
Service Letter-Asia
Systems Operation
Sensors
Caterpillar Monitoring System
Sensors
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Sensors
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Sensors - Payload Control System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Position Sensor (Left Brake Pedal)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System
Sensors
Payload Control System (PCS) 2.X
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Service Letter-APD
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
Testing and Adjusting
Speed Sensor - Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0041 FMI 03 Sensor Power Supply Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0041 FMI 04 Sensor Power Supply Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0177 FMI 03 Temperature Sensor (Transmission Oil) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0177 FMI 04 Temperature Sensor (Transmission Oil) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0190 FMI 02 Speed Sensor (Engine) Signal Incorrect - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0585 FMI 02 Speed Sensor (No. 1) (Transmission Output) Incorrect Signal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0672 FMI 02 Speed Sensor (Torque Converter Output) Signal Incorrect - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0673 FMI 02 Speed Sensor (No. 2) (Transmission Output) Incorrect Signal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0674 FMI 02 Speed Sensor (No. 1) (Transmission Intermediate) Incorrect Signal - Test - If Equipped
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0675 FMI 02 Speed Sensor (No. 2) (Transmission Intermediate) Abnormal Signal) - Test - If Equipped
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0350 FMI 00 Position Sensor (Lift Linkage) Above Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0350 FMI 01 Position Sensor (Lift Linkage) Below Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0350 FMI 02 Position Sensor (Lift Linkage) Incorrect Signal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0350 FMI 13 Position Sensor (Lift Linkage) Out of Calibration - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0352 FMI 00 Position Sensor (Lift Lever) Above Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0353 FMI 00 Position Sensor (Tilt Lever) Above Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0487 FMI 00 Position Sensor (Auxiliary Lever) Above Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0352 FMI 01 Position Sensor (Lift Lever) Below Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0353 FMI 01 Position Sensor (Tilt Lever) Below Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0487 FMI 01 Position Sensor (Auxiliary Lever) Below Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0352 FMI 13 Position Sensor (Lift Lever) Out of Calibration - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0353 FMI 13 Position Sensor (Tilt Lever) Out of Calibration - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0487 FMI 13 Position Sensor (Auxiliary Lever) Out of Calibration - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0350 FMI 08 Position Sensor (Lift Linkage) Abnormal Signal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Calibration and Programming
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Calibration
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Position Sensor (Lift Linkage) - Calibrate
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 1327 FMI 03 Position Sensor (Left Brake Pedal) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 1327 FMI 04 Position Sensor (Left Brake Pedal) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 1327 FMI 13 Position Sensor (Left Brake Pedal) Out of Calibration - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Position Sensor (Left Brake Pedal) - Calibrate
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X
Troubleshooting
MID 030 - CID 0110 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0100 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0110 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0263 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0263 - FMI 04
Caterpillar Monitoring System
Sensor Dynamic Operation
Caterpillar Monitoring System
Pulse Width Modulated Sensor
Caterpillar Monitoring System
MID 030 - CID 0830 - FMI 08
Caterpillar Monitoring System
Sensor Signal Voltage
Caterpillar Monitoring System
MID 030 - CID 0427 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0428 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0826 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0826 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0826 - FMI 04
Caterpillar Monitoring System
MID 122 - CID 0269 - FMI 03
Product Link 151/201
MID 122 - CID 0269 - FMI 04
Product Link 151/201
MID 030 - CID 1791 - FMI 08
Caterpillar Monitoring System
MID 074 - CID 0364 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0364 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0364 - FMI 08
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0769 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0769 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0769 - FMI 08
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 1964 - FMI 08
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 1964 - FMI 03
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 1964 - FMI 04
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0350 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0350 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0350 - FMI 13
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 1964 - FMI 13
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 1964 - FMI 02
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0364 - FMI 02
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0769 - FMI 02
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 030 - CID 0427 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0428 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0428 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0427 - FMI 04
Caterpillar Monitoring System
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Disassembly and Assembly
Engine Oil Pressure Sensor - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
New 193-2550 Speed Sensor Improves Service Life {3141, 3175}
2000/08/07
Correction to the Procedure for Position Sensor (Lift Linkage) - Adjust {5736, 7494}
2000/06/12
New Rotary Position Sensors Are Used {1400}
2002/07/01
New Parts for the Transmission are Not Equipped with Features for the Speed Sensor {3159, 3175}
2003/01/27
Correction to Troubleshooting Manual, &quot;Sensor Signal Voltage&quot; {5574}
2004/09/20
Troubleshooting Column-Type Fuel Level Senders {5574, 7481}
2005/08/22
Correction to Service Magazine , "Improved Speed Sensors Are Now Available" {1439, 3141, 3175, 4803}
2007/06/04
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Improved Rotary Position Sensor Is Now Used on Certain Cat<SUP>&reg;</SUP> Products {1439, 1913, 4806, 4809, 5736, 5737}
2012/07/11
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Explanation of Fuel Shutoff Solenoid Operation {1259}
2000/09/11
Correction to Service Magazine, SEPD0541 , "Explanation of Fuel Shutoff Solenoid Operation" {1259}
2001/01/08
New Solenoid Valve Eliminates Need For Orifices In Pilot Lines For Some Wheel Loaders {5059,5479}
1998/08/31
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Explanation of Fuel Shutoff Solenoid Operation {1259}
2000/09/11
Correction to Service Magazine, SEPD0541 , "Explanation of Fuel Shutoff Solenoid Operation" {1259}
2001/01/08
A New Mechanically Sealed Coil Has Improved Moisture Integrity Which Will Help to Extend the Life of the Coil {1554}
2002/03/25
Systems Operation
Fuel Shutoff Solenoid
3114, 3116 and 3126 MUI Engine Governors
Disassembly and Assembly
Fuel Shutoff Solenoid - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Operation and Maintenance Manual
Ether Starting Aid Cylinder - Replace - If Equipped
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Disassembly and Assembly
Ether Atomizer - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
A New Electronic Controller for the Air Inlet Heater Improves the Engine Starting Ability {1090}
2004/02/16
A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/24
Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Technical Information Bulletin
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Specifications
Starting Motor
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Testing and Adjusting
Troubleshooting Starting System
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Electric Starting System - Test
3114, 3116, and 3126 Engines
Pinion Clearance - Adjust
3114, 3116, and 3126 Engines
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Disassembly and Assembly
Electric Starting Motor - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Electric Starting Motor - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Magazine
Special Instruction, REHS1129, "Starting Motor Solenoid - Replace" Is Available {1467}
2001/08/13
New Starting Motors Used {1453}
2002/05/13
Examine Failed Starting Motors to Understand the Reason for Failure {1453}
2002/10/28
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Operation and Maintenance Manual
Battery Disconnect Switch
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Transmission Neutralizer Switch
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Procedure for Adjusting the Brake Light Switch on the Service Brake Foot Pedals With Two Stop Lamps in the Circuit{4269}
Procedure for Adjusting the Brake Light Switch on the Service Brake Foot Pedals With Two Stop Lamps in the Circuit{4269}
Procedure to Install the Horn Button{7332, 7402}
Procedure to Install the Horn Button{7332, 7402}
Repair/Replacement Procedure for <NOBR> 5C-6108</NOBR> Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Technical Information Bulletin
Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off
Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off
The Harness 118-2943 May Be Installed Incorrectly
The Harness 118-2943 May Be Installed Incorrectly
Machine Start Switch Key May Not Fit Properly{1416}
Machine Start Switch Key May Not Fit Properly{1416}
Specifications
Fuel Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Oil Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Transmission Oil Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Coolant Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Pressure Switch (Service Brake Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System
Pressure Switch (Primary Steering Oil and Secondary Steering Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System
Pressure Switch (Parking Brake Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System
Toggle Switch (Hood Tilt)
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Hydraulic System
Limit Switch (Transmission Neutralizer)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System
Limit Switch (Stop Light)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System
Temperature Switch (Axle Oil Cooler)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Temperature Switch (Front and Rear Axle Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Liquid Level Switch (Hydraulic Tank)
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Hydraulic System
Systems Operation
Rocker Switch (Transmission Neutralizer Override Control)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System
Switches
Caterpillar Monitoring System
Switches
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Switches
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Testing and Adjusting
Limit Switch (Transmission Neutralizer) - Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Braking System
CID 0070 FMI 03 Pressure Switch (Parking Brake Oil) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0070 FMI 04 Pressure Switch (Parking Brake Oil) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0444 FMI 03 Magnetic Switch (Start Relay) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0444 FMI 05 Magnetic Switch (Start Relay) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0444 FMI 06 Magnetic Switch (Start Relay) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0617 FMI 03 Magnetic Switch (Air Inlet Heater Relay) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0617 FMI 05 Magnetic Switch (Air Inlet Heater Relay) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0617 FMI 06 Magnetic Switch (Air Inlet Heater Relay) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0621 FMI 03 Push Button Switch (Downshift) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0621 FMI 04 Push Button Switch (Downshift) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0622 FMI 03 Push Button Switch (Upshift) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0623 FMI 03 Rocker Switch (Transmission Direction) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0623 FMI 04 Rocker Switch (Transmission Direction) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0793 FMI 03 Pressure Switch (Primary Steering) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0793 FMI 04 Pressure Switch (Primary Steering) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0794 FMI 03 Pressure Switch (Secondary Steering) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0794 FMI 04 Pressure Switch (Secondary Steering) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0794 FMI 07 Pressure Switch (Secondary Steering) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0365 FMI 04 Switch (Kickout Set) Voltage Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0489 FMI 04 Rocker Switch (Implement Function Selector) Voltage Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0365 FMI 05 Switch (Kickout Set) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0490 FMI 04 Switch (Implement Lockout) Voltage Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0489 FMI 05 Rocker Switch (Implement Function Selector) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0490 FMI 05 Switch (Implement Lockout) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0368 FMI 03 Rotary Switch (Transmission Auto/Man) Voltage Above Normal - Test - Command Control Steering-Without Integrated Braking System
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0368 FMI 04 Rotary Switch (Transmission Auto/Man) Voltage Below Normal - Test - Command Control Steering-Without Integrated Braking System
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0622 FMI 04 Push Button Switch (Upshift) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0367 FMI 02 Rocker Switch (Ride Control) Incorrect Signal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 1521 FMI 03 Rotary Switch (Variable Shift Control) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 1521 FMI 04 Rotary Switch (Variable Shift Control) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0368 FMI 03 Rotary Switch (Transmission Auto/Man) Voltage Above Normal - Test - Command Control Steering-Integrated Braking System
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0368 FMI 04 Rotary Switch (Transmission Auto/Man) Voltage Below Normal - Test - Command Control Steering-Integrated Braking System
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Limit Switch (Stop Light) - Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Braking System
Troubleshooting
Switch Circuits
Caterpillar Monitoring System
Service Magazine
New Pressure Switches With Improved Reliability {1435}
1999/08/09
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
New Orientation of the Harness Connector for the Pressure Switch (Secondary Steering) Improves Service Life {1435, 7553}
2000/11/06
Improved Transmission Direction Switch Now Used {7332}
2003/10/13
A New Oil Pressure Switch is Now Available {7421}
2005/05/09
The Improved Toggle Switch For The Hood Tilt System Is Now Used {7251, 7332}
2005/11/28
An Improved Pressure Switch is Now Available {1435}
2008/09/08
Update to the Testing and Adjusting , "Limit Switch (Stop Light) - Adjust" {1432, 1435, 4269}
2009/03/02
Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}
2009/04/06
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/06/06
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04
Engine News
The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
2004/04/01
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785}
2006/02/01
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
2006/10/16
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/03/28
Special Instruction
Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
An Aid To Reading Multimeter Scales{0785}
An Aid To Reading Multimeter Scales{0785}
Tool Operating Manual
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Systems Operation
Payload Control System/PC Off-Board System
Payload Control System (PCS) 2.X
VIMSpc Software
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electrical Service Tools
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Service Tools
Work Area Visual System
Troubleshooting
Service Tools
Alternator - Delco 21SI
Service Tools
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Tools
Machine Security System
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Machine Security System
Service Tools
Payload Control System (PCS) 2.X
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Caterpillar Monitoring System
Service Tools
Caterpillar Monitoring System
Service Tools
Alternator - Delco 27SI
Service Tools
Product Link 151/201
Service Tools
Product Link - PL102C
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Service Tools
Product Link - PL522/523
Service Tools
Product Link 121S/300
Service Tools
MSS3s Machine Security System
Service Magazine
Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785}
2002/08/19
USB Cable Connects PC with USB Ports to Communication Adapter or to DataView Tool Group {0785, 0788}
2004/03/15
New Test ECM Available for Machines {0785, 7610}
2004/11/08
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/12/01
New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
2006/10/02
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Testing and Adjusting
CID 0357 FMI 06 Solenoid Valve (Tilt Linkage Tilt Back) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Service Magazine
A New Coil Assembly is Now Used {5479}
2009/02/09
Operation and Maintenance Manual
Backup Alarm - If Equipped
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Backup Alarm - Test - If Equipped
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Testing and Adjusting
Troubleshooting Backup Alarm
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
Operation and Maintenance Manual
Battery Disconnect Switch
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuses - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Circuit Breakers - Reset
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Battery or Battery Cable - Inspect/Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Service Letter-NACD
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Electrical Problems And Malfunctions
Electrical Problems And Malfunctions
Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off
Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off
The Harness 118-2943 May Be Installed Incorrectly
The Harness 118-2943 May Be Installed Incorrectly
Steering Column Harness Assembly Kinking on G/GII Medium Wheel Loaders
Steering Column Harness Assembly Kinking on G/GII Medium Wheel Loaders
Specifications
Fuel Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Oil Pressure Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Transmission Oil Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Coolant Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Speed Sensor (Magnetic)
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Pressure Switch (Service Brake Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System
Temperature Sender (Torque Converter Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Pressure Switch (Primary Steering Oil and Secondary Steering Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System
Relay (Secondary Steering Motor)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System
Pressure Switch (Parking Brake Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System
Toggle Switch (Hood Tilt)
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Hydraulic System
Temperature Switch (Axle Oil Cooler)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Temperature Switch (Front and Rear Axle Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Temperature Sender (Hydraulic Oil)
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Hydraulic System
Service Letter-China
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
Service Letter-Asia
Systems Operation
Senders
Caterpillar Monitoring System
Switches
Caterpillar Monitoring System
Sensors
Caterpillar Monitoring System
Action Lamp
Caterpillar Monitoring System
Action Alarm
Caterpillar Monitoring System
Options Code Plug
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
Data Link
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System
CAT Data Link
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Service Letter-APD
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
Testing and Adjusting
Speed Sensor - Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
System Schematic
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Electrical Components And Connector Locations
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0041 FMI 03 Sensor Power Supply Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0041 FMI 04 Sensor Power Supply Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Electrical Connector - Inspect
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0070 FMI 03 Pressure Switch (Parking Brake Oil) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0070 FMI 04 Pressure Switch (Parking Brake Oil) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0168 FMI 00 Electrical System Voltage Above Normal Range - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0190 FMI 02 Speed Sensor (Engine) Signal Incorrect - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0270 FMI 09 Caterpillar Monitoring System Harness Code Abnormal Update - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0270 FMI 12 Caterpillar Monitoring System Harness Code Failed - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0444 FMI 03 Magnetic Switch (Start Relay) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0444 FMI 05 Magnetic Switch (Start Relay) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0444 FMI 06 Magnetic Switch (Start Relay) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0562 FMI 09 Caterpillar Monitoring System Abnormal Update - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0617 FMI 03 Magnetic Switch (Air Inlet Heater Relay) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0617 FMI 05 Magnetic Switch (Air Inlet Heater Relay) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0617 FMI 06 Magnetic Switch (Air Inlet Heater Relay) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0793 FMI 03 Pressure Switch (Primary Steering) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0793 FMI 04 Pressure Switch (Primary Steering) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0794 FMI 03 Pressure Switch (Secondary Steering) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0794 FMI 04 Pressure Switch (Secondary Steering) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0794 FMI 07 Pressure Switch (Secondary Steering) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0168 FMI 00 Electrical System Voltage Above Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0168 FMI 01 Electrical System Voltage Below Normal Range - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0248 FMI 12 CAT Data Link Failed - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0270 FMI 02 Caterpillar Monitoring System Harness Code Incorrect - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0270 FMI 09 Caterpillar Monitoring System Harness Code Abnormal Update - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0296 FMI 09 Power Train Electronic Control Module Abnormal Update - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0296 FMI 11 Power Train Electronic Control Module Failure Mode Not Identifiable - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0359 FMI 03 Detent Coil (Lift Lever Raise) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0360 FMI 03 Detent Coil (Lift Lever Lower) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0361 FMI 03 Detent Coil (Tilt Lever Tilt Back) Voltage Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0359 FMI 05 Detent Coil (Lift Lever Raise) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0360 FMI 05 Detent Coil (Lift Lever Lower) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0361 FMI 05 Detent Coil (Tilt Lever Tilt Back) Current Below Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0359 FMI 06 Detent Coil (Lift Lever Raise) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0360 FMI 06 Detent Coil (Lift Lever Lower) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0361 FMI 06 Detent Coil (Tilt Lever Tilt Back) Current Above Normal - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
CID 0687 FMI 02 Options Code Incorrect - Test
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System
Electrical Connector - Inspect
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Electrical Connector - Inspect
Caterpillar Monitoring System
Electric Starting System - Test
3114, 3116, and 3126 Engines
Wiring Harness (Open Circuit) - Test
Payload Control System (PCS) 2.X
Wiring Harness (Short Circuit) - Test
Payload Control System (PCS) 2.X
System Schematic
Machine Security System
Troubleshooting
MID 030 - CID 0324 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0324 - FMI 05
Caterpillar Monitoring System
MID 030 - CID 0324 - FMI 06
Caterpillar Monitoring System
Electrical Component and Connector Locations
Caterpillar Monitoring System
Switch Circuits
Caterpillar Monitoring System
Service Magazine
New Position Sensor For Payload Control System And Implement Control System Features Improved Sealing {1408}
1999/04/19
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
Correction to the Procedure for Position Sensor (Lift Linkage) - Adjust {5736, 7494}
2000/06/12
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/10/23
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
New Orientation of the Harness Connector for the Pressure Switch (Secondary Steering) Improves Service Life {1435, 7553}
2000/11/06
Field Returns of 4W-9972 Temperature Senders Are Necessary for Failure Analysis {1906}
2000/11/13
Improved Transmission Direction Switch Now Used {7332}
2003/10/13

Truck sale:

Caterpillar 950G
 
Caterpillar 950G
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
129,900 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 950GC, Wheel Loaders, Construction
185,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Caterpillar 950GC, Wheel Loaders, Construction
190,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
215,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
THOMPSON TRACTOR CO., INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.