AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2Z-9989 Waste Handler Custom Product Support Literature for 950G Wheel Loader 3JW00001-UP (MACHINE) FUEL SYSTEM Caterpillar SIS



WHEEL LOADER 950G WHEEL LOADER 3JW
 2Z-9989 Waste Handler Custom Product Support Literature for 950G Wheel Loader 3JW00001-UP (MACHINE) SEBC1276 950G 3JW   (1998)

Parts group 950G:

  For full view, you need register
FUEL SYSTEM
TANK GP-FUEL
TANK GP-FUEL
2Q-8209 TANK GP-FUEL
2Q-8209 TANK GP-FUEL -CUSTOM
PART OF 2Q-8234 GUARD GP-FUEL & HYDRAULIC TANK
GUARD GP-FUEL & HYDRAULIC TANK
2Q-8234 GUARD GP-FUEL & HYDRAULIC TANK
2Q-8234 GUARD GP-FUEL & HYDRAULIC TANK -CUSTOM
PART OF 2Z-9989 WASTE AR

Information:

(For parts list, see above)

Service Magazine
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Special Instruction
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
Service Letter-NACD
Improvement Of Machine Performance On Certain 950G And 962G Wheel Loaders
Improvement Of Machine Performance On Certain 950G And 962G Wheel Loaders
Technical Information Bulletin
Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly
Disassembly and Assembly
Fuel Injection Control Linkage - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Fuel Injection Control Linkage - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Systems Operation
Fuel Ratio Control (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Testing and Adjusting
Fuel Ratio Control - Adjust
3114, 3116, and 3126 Engines
Service Magazine
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Service Letter-NACD
Improvement Of Machine Performance On Certain 950G And 962G Wheel Loaders
Improvement Of Machine Performance On Certain 950G And 962G Wheel Loaders
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Primary Filter (Water Separator) Element - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuel System Primary Filter (Water Separator) - Drain
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuel System - Prime
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuel System Secondary Filter Number One - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuel System Secondary Filter Number Two - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Service Letter-NACD
Product Support Program For The Installation Of New Fuel Line Clips On Certain 950G And 962G Wheel Loaders; And It62G Integrated Tool Carriers
Product Support Program For The Installation Of New Fuel Line Clips On Certain 950G And 962G Wheel Loaders; And It62G Integrated Tool Carriers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Primary Fuel Filter
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Letter-China
Product Support Program For The Installation Of New Fuel Line Clips On Certain 950G And 962G Wheel Loaders; And It62G Integrated Tool Carriers
Product Support Program For The Installation Of New Fuel Line Clips On Certain 950G And 962G Wheel Loaders; And It62G Integrated Tool Carriers
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Fuel Priming Pump and Primary Fuel Filter - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Fuel Filter Base - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
The Fuel System Should be Primed when Fuel Filters are Changed {1250, 1261, 1263}
2002/11/11
Improved Seal on Fuel Filter {1261}
2005/09/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Special Instruction
Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857}
Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857}
Service Magazine
Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2013/07/08
Operation and Maintenance Manual
Engine Governor Oil Supply Screen - Clean/Inspect/Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Technical Information Bulletin
Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly
Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Tool Operating Manual
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Testing and Adjusting
CID 0688 FMI 03 Solenoid Valve (Dual Horsepower) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0688 FMI 05 Solenoid Valve (Dual Horsepower) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0688 FMI 06 Solenoid Valve (Dual Horsepower) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor and Fuel Transfer Pump - Remove
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor and Fuel Transfer Pump - Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Service Letter-NACD
Product Support Program For The Installation Of New Fuel Line Clips On Certain 950G And 962G Wheel Loaders; And It62G Integrated Tool Carriers
Product Support Program For The Installation Of New Fuel Line Clips On Certain 950G And 962G Wheel Loaders; And It62G Integrated Tool Carriers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Metal Shavings in the Hydraulic Electronic Unit Injector (HEUI) Oil Passages{1250, 1274}
Metal Shavings in the Hydraulic Electronic Unit Injector (HEUI) Oil Passages{1250, 1274}
Specifications
Primary Fuel Filter
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Service Letter-China
Product Support Program For The Installation Of New Fuel Line Clips On Certain 950G And 962G Wheel Loaders; And It62G Integrated Tool Carriers
Product Support Program For The Installation Of New Fuel Line Clips On Certain 950G And 962G Wheel Loaders; And It62G Integrated Tool Carriers
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Service Magazine
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
A New Vent Valve Improves Fuel System Priming {1258, 5118}
2000/02/07
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Tool Operating Manual
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/07/29
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
2008/12/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Operation and Maintenance Manual
Engine Governor Oil Supply Screen - Clean/Inspect/Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Specifications
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Service Magazine
Lubricity Limit Added To Preferred Distillate Fuel Recommendation {1280,7568}
1997/08/18
Use 139-4166 CAT/ATA Universal Cable For Diagnostic Testing {1900,0781}
1998/03/02
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Tool Operating Manual
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Tool Operating Manual
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Service Magazine
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/05/19
Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Operation and Maintenance Manual
Fuel Injection Timing - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Service Letter-NACD
Improvement Of Machine Performance On Certain 950G And 962G Wheel Loaders
Improvement Of Machine Performance On Certain 950G And 962G Wheel Loaders
Tool Operating Manual
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Fuel Timing Dimension - Adjust
3114, 3116, and 3126 Engines
Unit Injector - Adjust
3114, 3116, and 3126 Engines
Unit Injector Synchronization - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Unit Injector - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Troubleshooting Engines with Mechanical Unit Injection (MUI) {1254}
2006/01/02
Service Tips for the Hydraulic Electronic Unit Injector HEUI Pump {1714}
2006/03/13
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/07/29
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/05/19
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Injectors Should Not Be Tested for Proper Operation Prior to Being Installed Into the Engine {1251, 1290}
2009/02/23
Service Tips for the Hydraulic Electronic Unit Injector HEUI Pump {1714}
2010/08/26
Truck Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/11/26
Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Operation and Maintenance Manual
Fuel System Primary Filter (Water Separator) Element - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuel System Primary Filter (Water Separator) - Drain
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuel System - Prime
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Procedure for the 228-7144 Pump Repair Kit {1258, 1263}
Installation Procedure for the 228-7144 Pump Repair Kit {1258, 1263}
Specifications
Primary Fuel Filter
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting
Fuel System - Prime
3114, 3116, and 3126 Engines
Disassembly and Assembly
Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Fuel Priming Pump and Primary Fuel Filter - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
A New Vent Valve Improves Fuel System Priming {1258, 5118}
2000/02/07
The Fuel System Should be Primed when Fuel Filters are Changed {1250, 1261, 1263}
2002/11/11
The 228-7144 Pump Repair Kit (Electric Fuel Priming) is Now Available {1258}
2003/03/03
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/04
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Systems Operation
Fuel Transfer Pump
3114, 3116 and 3126 MUI Engine Governors
Testing and Adjusting
Fuel System Pressure - Test
3114, 3116, and 3126 Engines
Disassembly and Assembly
Fuel Transfer Pump - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Tool Operating Manual
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Operation and Maintenance Manual
Fuel System Primary Filter (Water Separator) Element - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuel System Primary Filter (Water Separator) - Drain
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Installation Procedure for the 228-7144 Pump Repair Kit {1258, 1263}
Installation Procedure for the 228-7144 Pump Repair Kit {1258, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Disassembly and Assembly
Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Service Magazine
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
The Fuel System Should be Primed when Fuel Filters are Changed {1250, 1261, 1263}
2002/11/11
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21
Systems Operation
Fuel Shutoff Solenoid
3114, 3116 and 3126 MUI Engine Governors
Disassembly and Assembly
Fuel Shutoff Solenoid - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Operation and Maintenance Manual
Fuel Tank Cap and Strainer - Clean
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Fuel Tank Water and Sediment - Drain
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857}
Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Troubleshooting
MID 030 - CID 0096 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 08
Caterpillar Monitoring System
Fuel Level Sender
Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 04
Caterpillar Monitoring System
Disassembly and Assembly
Fuel Tank - Remove
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Fuel Tank - Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Service Magazine
Improved Fuel Level Senders Have Increased Reliability {1273}
1999/08/30
Updated Fuel Tank Caps Are Now Available {1273}
2004/03/15
Updated Fuel Tank Caps are Now Available {1273}
2014/01/24
Conversion Kits are Available to Convert Caterpillar or Wiggins Fast Fuel System Threaded Receivers to Caterpillar Flange Mounted Receivers {1710}
2004/03/22
Troubleshooting Column-Type Fuel Level Senders {5574, 7481}
2005/08/22
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2013/07/08
Service Letter-NACD
Inspect Certain 3116 And 3126 Engines Used In Claas CH 55 Tractors; 120H And 135H Motor Graders; 928G, 938G And 950G Wheel Loaders; IT28G And IT38G Tool Carriers; 613C Scrapers; 322B And 325B Excavators; CS563C, CP563C And CS583C Vibratory Compactors; AP1055B And BG245C Asphalt Pavers For Improperly Installed Injector Sleeves
Inspect Certain 3116 And 3126 Engines Used In Claas CH 55 Tractors; 120H And 135H Motor Graders; 928G, 938G And 950G Wheel Loaders; IT28G And IT38G Tool Carriers; 613C Scrapers; 322B And 325B Excavators; CS563C, CP563C And CS583C Vibratory Compactors; AP1055B And BG245C Asphalt Pavers For Improperly Installed Injector Sleeves
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Magazine
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
170-9227 Shims Will Control Injector Sleeve Reaming {0700, 0703, 0706, 1000}
2000/09/11
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/11/27
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Testing and Adjusting
CID 0688 FMI 03 Solenoid Valve (Dual Horsepower) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0688 FMI 05 Solenoid Valve (Dual Horsepower) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0688 FMI 06 Solenoid Valve (Dual Horsepower) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Service Magazine
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12

Truck sale:

Caterpillar 950G
 
Caterpillar 950G
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
129,900 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 950GC, Wheel Loaders, Construction
185,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Caterpillar 950GC, Wheel Loaders, Construction
190,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
215,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
THOMPSON TRACTOR CO., INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.