AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2Z-9989 Waste Handler Custom Product Support Literature for 950G Wheel Loader 3JW00001-UP (MACHINE) POWER TRAIN Caterpillar SIS



WHEEL LOADER 950G WHEEL LOADER 3JW
 2Z-9989 Waste Handler Custom Product Support Literature for 950G Wheel Loader 3JW00001-UP (MACHINE) SEBC1276 950G 3JW   (1998)

Parts group 950G:

  For full view, you need register
POWER TRAIN
FILLER GP-POWER TRAIN OIL
GUARD GP-OIL LEVEL GAUGE
070-0031 GUARD GP-OIL LEVEL GAUGE
070-0031 GUARD GP-OIL LEVEL GAUGE -CUSTOM
PART OF 2Z-9989 WASTE AR
SHAFT GP
GUARD GP-DRIVE SHAFT
2Q-8069 GUARD GP-DRIVE SHAFT
2Q-8069 GUARD GP-DRIVE SHAFT -CUSTOM
PART OF 2Z-9989 WASTE AR

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Service Magazine
Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Operation and Maintenance Manual
Braking System - Test
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Differential and Final Drive Oil - Change
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Differential and Final Drive Oil Level - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Service Brake Disc Wear Indicator - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Axle Oscillation Bearings - Lubricate
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Brake Discs - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Differential and Final Drive Oil Sample - Obtain
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Dimensions for Oscillating Rear Axle Components and Supports{3278, 3282}
Dimensions for Oscillating Rear Axle Components and Supports{3278, 3282}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Technical Information Bulletin
Brake Oil Cooler Guide
Brake Oil Cooler Guide
Specifications
Service Brakes
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System
Fixed Axle Housing
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Oscillating Axle Housing
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Brake and Planetary
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Fixed Axle Housing
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Systems Operation
Service Brakes
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Braking System
Fixed Axle and Oscillating Axle
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Reuse And Salvage Guidelines
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion {0679, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion {0679, 3268}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Testing and Adjusting
Service Brake Wear Indicator (Existing Brake Disc) - Check
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Braking System
Axle Housing and Bearing Preload - Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Service Brake Wear Indicator (New Brake Disc) - Check
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Braking System
Disassembly and Assembly
Trunnion Support (Oscillating Axle, Front) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Trunnion Support (Oscillating Axle, Rear) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Duo-Cone Conventional Seals - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Axle Housing - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Axle Housing - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Differential and Bevel Gear - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Differential and Bevel Gear - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Oscillating Axle (Rear) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Oscillating Axle (Rear) - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Service Brakes - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Service Brakes - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Fixed Axle (Front) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Fixed Axle (Front) - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Service Magazine
Use FT2616 Wear Gauge Block For Measuring Brake Wear {7473}
1998/11/23
Correction To Power Train Disassembly And Assembly Manual SENR1381-01 {0600,0722,3254,3258,3260}
1999/01/25
A Special Instruction Is Available for the Dimensions of Oscillating Rear Axle Components and Supports on Wheel Loaders and Integrated Toolcarriers {3278}
2000/07/24
Correction to the Allowable Oil Viscosity on the Driveline {3258, 4011, 4051, 7581}
2001/01/22
New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
2001/04/02
New Sleeve Bearings in the Oscillating Axle Trunnion Support Improve Service Life {3268, 7551}
2003/08/18
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Reuse And Salvage Guidelines
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Reuse And Salvage Guidelines
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Service Magazine
Procedure for Cleaning the Power Train {3065, 3139}
2014/03/21
Special Instruction
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission<BR>IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission
IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Technical Information Bulletin
Incorrect Speed Sensor Wiring Causes Fill Calibration to Abort
Incorrect Speed Sensor Wiring Causes Fill Calibration to Abort
ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}
ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}
Specifications
Temperature Sensor (Transmission Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Transmission Hydraulic Control
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Relief Valve (Transmission Hydraulic Control)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Relief Valve (Torque Converter Inlet)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Modulating Valve (Transmission Clutch)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Relief Valve (Torque Converter Inlet)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Modulating Valve (Transmission Clutch)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Systems Operation
Transmission Hydraulic Control
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Transmission Hydraulic Control Operation
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Testing and Adjusting
Transmission Pressures - Test and Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0177 FMI 03 Temperature Sensor (Transmission Oil) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0177 FMI 04 Temperature Sensor (Transmission Oil) Voltage Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Calibration and Programming
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Bench Test Procedures
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission<BR>IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission
IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Service Magazine
Correction To Parts Manual SEBP2700-03 {0374,3073,3167}
1999/03/15
An Improved O-Ring Seal is Now Used in the Transmission Clutch Solenoid Modulating Valves {3073, 3167}
2015/09/10
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Operation and Maintenance Manual
Differential and Final Drive Oil - Change
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Differential and Final Drive Oil Level - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Differential and Final Drive Oil Sample - Obtain
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Procedure for the Removal of Bolts That Are Used for Shipping on Differentials {3258}
Procedure for the Removal of Bolts That Are Used for Shipping on Differentials {3258}
Specifications
Differential
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Bevel Gear and Pinion (Fixed Axle)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Limited Slip Differential
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
NoSPIN Differential
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Bevel Gear and Pinion (Oscillating Axle)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Systems Operation
Differential
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Limited Slip Differential
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
NoSPIN Differential
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Reuse And Salvage Guidelines
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Testing and Adjusting
Differential Pinion Preload - Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Differential Backlash and Bearings - Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Limited Slip Differential Disc End Play Check - Check
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Disassembly and Assembly
Limited Slip Differential - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Limited Slip Differential - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
NoSPIN Differential - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
NoSPIN Differential - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Differential - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Differential - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Differential Pinion - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Differential Pinion - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Differential and Bevel Gear - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Differential and Bevel Gear - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Service Magazine
Correction To Power Train Disassembly And Assembly Manual SENR1381-01 {0600,0722,3254,3258,3260}
1999/01/25
Correction to the Allowable Oil Viscosity on the Driveline {3258, 4011, 4051, 7581}
2001/01/22
New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
2001/04/02
Special Instruction, REHS0986, "Procedure for the Removal of Bolts That Are Used for Shipping on Differentials" is Now Available {3258}
2001/07/02
Use <NOBR> 1U-9891</NOBR> Hydraulic Oil Additive to Eliminate Brake Chatter and Reduce Noise in the Limited Slip Differential {3263, 5095}
2008/10/27
Correction to Disassembly and Assembly , "Differential and Bevel Gear - Install" {3254, 3258}
2006/08/07
Correction to Disassembly and Assembly , "Differential Pinion - Assemble" {3254}
2006/08/07
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Specifications
Pump Drive Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Service Magazine
A New Lip Seal Improves the Durability of the Transmission {3075, 3159}
2005/05/30
Specifications
Transmission Oil Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Torque Converter Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Operation and Maintenance Manual
Transmission Oil Level - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Transmission Oil - Change
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Operation and Maintenance Manual
Oil Filter - Inspect
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Transmission Oil Filter - Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Transmission Oil Sample - Obtain
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Specifications
Oil Filter (Power Train)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Systems Operation
Oil Filter (Power Train)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
A New Transmission Filter Is Now Used In Certain Wheel Loaders {3004, 3067}
2010/03/17
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Technical Information Bulletin
Incorrect Speed Sensor Wiring Causes Fill Calibration to Abort
Incorrect Speed Sensor Wiring Causes Fill Calibration to Abort
Specifications
Speed Sensor (Transmission Output)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Output Transfer Gears
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Output Transfer Gears
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Testing and Adjusting
Output Transfer Gears - Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Speed Sensor - Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0585 FMI 02 Speed Sensor (No. 1) (Transmission Output) Incorrect Signal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0673 FMI 02 Speed Sensor (No. 2) (Transmission Output) Incorrect Signal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Disassembly and Assembly
Engine, Torque Converter, Transmission and Output Transfer Gears - Remove
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Engine, Torque Converter, Transmission and Output Transfer Gears - Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Engine from Torque Converter, Transmission, Output Transfer Gears - Separate
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Engine to Torque Converter, Transmission, Output Transfer Gears - Connect
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Torque Converter from Transmission, Output Transfer Gears - Separate
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Torque Converter to Transmission, Output Transfer Gears - Connect
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Transmission from Output Transfer Gears - Separate
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Transmission to Output Transfer Gears - Connect
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Output Transfer Gears - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Output Transfer Gears - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Parking Brake - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Parking Brake Actuator - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Service Magazine
Corrections to the Power Train Disassembly and Assembly Module, SENR1381-02 and the Machine Systems Disassembly and Assembly Module, SENR1392-03 {4267}
2000/01/03
A New Case is Used in the Output Gear Group {3159}
2002/02/25
A New Yoke is Used for the Output Transfer Gear Group {3159}
2002/02/25
Longer Bolts are Used in the Bearing Cage of the Output Transfer Gear Group {3159}
2002/02/25
New Parts for the Transmission are Not Equipped with Features for the Speed Sensor {3159, 3175}
2003/01/27
A New Lip Seal Improves the Durability of the Transmission {3075, 3159}
2005/05/30
A New Lip Seal Improves the Durability of the Transmission {3075, 3159}
2005/06/27
A New Retainer and a New Output Shaft Improve the Durability of the Transmission {3063, 3075, 3159}
2005/08/08
A New Lip Seal Improves the Durability of the Transmission {3075, 3159}
2005/08/15
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission<BR>IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission
IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
A Seal Needs To Be Added To The Axle Oil Cooler Pump On Certain 950G And 962G Wheel Loaders And IT62G Integrated Toolcarriers
A Seal Needs To Be Added To The Axle Oil Cooler Pump On Certain 950G And 962G Wheel Loaders And IT62G Integrated Toolcarriers
Service Letter-Australia
Service Letter-CFEL
Specifications
Transmission Oil Pump
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Axle Oil Cooler Pump and Clutch
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Service Letter-China
A Seal Needs To Be Added To The Axle Oil Cooler Pump On Certain 950G And 962G Wheel Loaders And IT62G Integrated Toolcarriers
A Seal Needs To Be Added To The Axle Oil Cooler Pump On Certain 950G And 962G Wheel Loaders And IT62G Integrated Toolcarriers
Service Letter-Asia
Systems Operation
Transmission Oil Pump
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Service Letter-APD
A Seal Needs To Be Added To The Axle Oil Cooler Pump On Certain 950G And 962G Wheel Loaders And IT62G Integrated Toolcarriers
A Seal Needs To Be Added To The Axle Oil Cooler Pump On Certain 950G And 962G Wheel Loaders And IT62G Integrated Toolcarriers
Bench Test Procedures
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission<BR>IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission
IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Disassembly and Assembly
Transmission Oil Pump - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Transmission Oil Pump - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Transmission Oil Pump - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Transmission Oil Pump - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Axle Oil Cooler Pump and Clutch - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Specifications
Torque Converter Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2009/01/26
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Operation and Maintenance Manual
Drive Shaft Spline (Center) - Lubricate
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Drive Shaft Support Bearing - Lubricate
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Drive Shaft Universal Joints - Lubricate
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Specifications
Drive Shaft
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Drive Shaft
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Disassembly and Assembly
Drive Shaft (Front) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Drive Shaft (Center) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Drive Shaft (Rear) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Service Magazine
Thread Lock Compound and a New Torque is Used on the Bolt for the Front Drive Shaft {3253}
2002/07/01
Correction to Specifications , "Drive Shaft" {3253}
2002/07/15
Corrections to Specifications , "Drive Shaft" {0645, 3253}
2006/04/24
Improved Drive Shaft Groups for Medium Wheel Loaders {3253}
2008/02/04
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Technical Information Bulletin
For Calibration Of Transmission Clutch Engagement - Use Only 4C-8195 Control Service Tool
For Calibration Of Transmission Clutch Engagement - Use Only 4C-8195 Control Service Tool
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Correction To Power Train Disassembly And Assembly Manual SENR1381-01 {0600,0722,3254,3258,3260}
1999/01/25
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Special Instruction
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission<BR>IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission
IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Procedure to Rework Housings for the Installation of New Planetary Bolts{3030, 3064, 3105}
Procedure to Rework Housings for the Installation of New Planetary Bolts{3030, 3064, 3105}
Technical Information Bulletin
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
Specifications
Pump Drive Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Torque Converter Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Torque Converter and Pump Drive Housing
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Torque Converter
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Speed Sensor (Torque Converter Output)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Systems Operation
Torque Converter and Pump Drive Housing
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Torque Converter
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101}
Thermal Spray Procedures for Pump Gear Drive Inside Diameter{0374, 0599, 0679, 3101}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Testing and Adjusting
Torque Converter Stall - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Speed Sensor - Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0672 FMI 02 Speed Sensor (Torque Converter Output) Signal Incorrect - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Bench Test Procedures
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission<BR>IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission
IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Engine, Torque Converter, Transmission and Output Transfer Gears - Remove
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Engine, Torque Converter, Transmission and Output Transfer Gears - Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Engine from Torque Converter, Transmission, Output Transfer Gears - Separate
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Engine to Torque Converter, Transmission, Output Transfer Gears - Connect
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Torque Converter from Transmission, Output Transfer Gears - Separate
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Torque Converter to Transmission, Output Transfer Gears - Connect
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Torque Converter - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Torque Converter - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Service Magazine
The Torque Converter Housing Has Been Improved {3101, 3105}
2005/01/10
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
Procedure for Cleaning the Power Train {3065, 3139}
2014/03/21
A New Planetary Transmission Bolt That Improves Service Life Is Now Available {3030, 3064, 3105}
2008/09/29
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Operation and Maintenance Manual
Transmission Oil Level - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Transmission Oil - Change
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Transmission Oil Sample - Obtain
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission<BR>IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission
IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Rework Housings for the Installation of New Planetary Bolts{3030, 3064, 3105}
Procedure to Rework Housings for the Installation of New Planetary Bolts{3030, 3064, 3105}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Service Letter-NACD
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
Service Letter-Australia
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
Service Letter-CFEL
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
Service Letter-CSARL
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
Service Letter-Americas
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
Technical Information Bulletin
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
Transmission Controls (Shift Lever) May Fail
Transmission Controls (Shift Lever) May Fail
Inspect Transmission Bolts
Inspect Transmission Bolts
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
Specifications
Transmission Oil Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Torque Converter Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Speed Sensor (Transmission Output)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Transmission Planetary
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Engine and Transmission Mounting
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Transmission Planetary
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Letter-China
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
Service Letter-Asia
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
Systems Operation
Output Transfer Gears
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Transmission Planetary
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Transmission Hydraulic System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Transmission Lubrication
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Service Letter-APD
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
The Transmission Needs To Be Inspected And Reworked If A Lubrication Passage Is Missing On Certain 950G, And 962G Wheel Loaders; And IT62G Integrated Toolcarriers
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE ROTATING CLUTCH SUPPORT BEARING IN THE TRANSMISSION OF CERTAIN 950F, 950G, 960F, 962G, WHEEL LOADERS AND IT62G INTEGRATED TOOLCARRIERS
Testing and Adjusting
Output Transfer Gears - Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Transmission Pressures - Test and Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Speed Sensor - Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0674 FMI 02 Speed Sensor (No. 1) (Transmission Intermediate) Incorrect Signal - Test - If Equipped
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0675 FMI 02 Speed Sensor (No. 2) (Transmission Intermediate) Abnormal Signal) - Test - If Equipped
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Fill Time for the Transmission Clutch - Calibrate
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Engagement Pressure for the Transmission Clutch - Calibrate
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Bench Test Procedures
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission<BR>IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Bench Test Procedure for a 950G, 950G Series 2, 962G, and 962G Series 2 Wheel Loader Transmission
IT62G and IT62G Series 2 Integrated Toolcarrier Transmission{3030, 3066, 3073, 3101}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Engine, Torque Converter, Transmission and Output Transfer Gears - Remove
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Engine, Torque Converter, Transmission and Output Transfer Gears - Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Engine from Torque Converter, Transmission, Output Transfer Gears - Separate
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Engine to Torque Converter, Transmission, Output Transfer Gears - Connect
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement
Torque Converter from Transmission, Output Transfer Gears - Separate
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Torque Converter to Transmission, Output Transfer Gears - Connect
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Transmission from Output Transfer Gears - Separate
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Transmission to Output Transfer Gears - Connect
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Transmission Planetary - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Transmission Planetary - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Service Magazine
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
A New Slotted Transmission Clutch Piston Improves Seal Inflation {3170}
2000/06/12
New Reaction Plates in Transmissions Are Now Used {3160}
2002/09/30
A Spool in ECPC Valves is No Longer Serviced {3030, 3155}
2003/08/04
A New Transmission Bolt Improves Service Life {3030}
2004/11/01
A New Transmission Breather Is Now Used {3030}
2004/12/20
A New Lip Seal Improves the Durability of the Transmission {3075, 3159}
2005/06/27
A New Retainer and a New Output Shaft Improve the Durability of the Transmission {3063, 3075, 3159}
2005/08/08
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Procedure for Cleaning the Power Train {3065, 3139}
2014/03/21
A New Planetary Transmission Bolt That Improves Service Life Is Now Available {3030, 3064, 3105}
2008/09/29
An Improved O-Ring Seal is Now Used in the Transmission Clutch Solenoid Modulating Valves {3073, 3167}
2015/09/10
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Ensure Ring Gear Part Number when Servicing Transmission Planetary Group on Certain Wheel Loaders {3054, 3160, 7552}
2014/03/12
Cat&reg; Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
2014/09/11
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Operation and Maintenance Manual
Transmission Oil Sample - Obtain
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Technical Information Bulletin
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
For Calibration Of Transmission Clutch Engagement - Use Only 4C-8195 Control Service Tool
For Calibration Of Transmission Clutch Engagement - Use Only 4C-8195 Control Service Tool
Modulating Valve Connectors May Not Be Fully Seated
Modulating Valve Connectors May Not Be Fully Seated
New Software Corrects Calibration Failures
New Software Corrects Calibration Failures
ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}
ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}
Specifications
Modulating Valve (Transmission Clutch)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Modulating Valve (Transmission Clutch)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Systems Operation
Modulating Valve (Transmission Clutch)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Testing and Adjusting
Transmission Pressures - Test and Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0631 FMI 03 Modulating Valve (Clutch 1 Solenoid) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0631 FMI 05 Modulating Valve (Clutch 1 Solenoid) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0631 FMI 06 Modulating Valve (Clutch 1 Solenoid) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0631 FMI 07 Modulating Valve (Clutch 1 Solenoid) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0631 FMI 13 Modulating Valve (Clutch 1 Solenoid) Out of Calibration - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0632 FMI 03 Modulating Valve (Clutch 2 Solenoid) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0632 FMI 05 Modulating Valve (Clutch 2 Solenoid) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0632 FMI 06 Modulating Valve (Clutch 2 Solenoid) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0632 FMI 07 Modulating Valve (Clutch 2 Solenoid) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0633 FMI 03 Modulating Valve (Clutch 3 Solenoid) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0633 FMI 05 Modulating Valve (Clutch 3 Solenoid) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0633 FMI 06 Modulating Valve (Clutch 3 Solenoid) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0633 FMI 07 Modulating Valve (Clutch 3 Solenoid) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0633 FMI 13 Modulating Valve (Clutch 3 Solenoid) Out of Calibration - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0634 FMI 03 Modulating Valve (Clutch 4 Solenoid) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0634 FMI 05 Modulating Valve (Clutch 4 Solenoid) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0634 FMI 06 Modulating Valve (Clutch 4 Solenoid) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0634 FMI 07 Modulating Valve (Clutch 4 Solenoid) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0634 FMI 13 Modulating Valve (Clutch 4 Solenoid) Out of Calibration - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0635 FMI 03 Modulating Valve (Clutch 5 Solenoid) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0635 FMI 05 Modulating Valve (Clutch 5 Solenoid) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0635 FMI 06 Modulating Valve (Clutch 5 Solenoid) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0635 FMI 07 Modulating Valve (Clutch 5 Solenoid) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0635 FMI 13 Modulating Valve (Clutch 5 Solenoid) Out of Calibration - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0636 FMI 03 Modulating Valve (Clutch 6 Solenoid) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0636 FMI 05 Modulating Valve (Clutch 6 Solenoid) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0636 FMI 06 Modulating Valve (Clutch 6 Solenoid) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0636 FMI 07 Modulating Valve (Clutch 6 Solenoid) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0636 FMI 13 Modulating Valve (Clutch 6 Solenoid) Out of Calibration - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
CID 0632 FMI 13 Modulating Valve (Clutch 2 Solenoid) Out of Calibration - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Fill Time for the Transmission Clutch - Calibrate
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Engagement Pressure for the Transmission Clutch - Calibrate
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Calibration and Programming
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Disassembly and Assembly
Modulating Valve (Transmission Clutch) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Modulating Valve (Transmission Clutch) - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Modulating Valve (Transmission Clutch) - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Modulating Valve (Transmission Clutch) - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Service Magazine
An Improved Modulating Valve is Available for Transmissions {3139}
2001/07/30
Technical Information Bulletin
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
The Check Ball in the Spool Assembly of the Main Relief Valve May be Missing on Various Products{3133, 3182, 3210, 3213}
The Check Ball in the Spool Assembly of the Main Relief Valve May be Missing on Various Products{3133, 3182, 3210, 3213}
Specifications
Relief Valve (Transmission Hydraulic Control)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Testing and Adjusting
Transmission Pressures - Test and Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Relief Valve (Transmission Hydraulic Control) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Relief Valve (Transmission Hydraulic Control) - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Relief Valve (Transmission Hydraulic Control) - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Relief Valve (Transmission Hydraulic Control) - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Service Magazine
A New Coil Assembly is Now Used {5479}
2011/05/04
Special Instruction
Field Service of the Transmission Hydraulic Control Valves (Modulating Valves) with the 160-8408 Modulating Valve {3073, 3139, 7620}
Field Service of the Transmission Hydraulic Control Valves (Modulating Valves) with the 160-8408 Modulating Valve {3073, 3139, 7620}
Technical Information Bulletin
Incorrect Speed Sensor Wiring Causes Fill Calibration to Abort
Incorrect Speed Sensor Wiring Causes Fill Calibration to Abort
Specifications
Transmission Hydraulic Control
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Testing and Adjusting
Transmission Pressures - Test and Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train
Service Magazine
Correction To Parts Manual SEBP2700-03 {0374,3073,3167}
1999/03/15
An Improved O-Ring Seal is Now Used in the Transmission Clutch Solenoid Modulating Valves {3073, 3167}
2015/09/10
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Planetary Final Drives for Small and Medium Wheel Loaders and Small Integrated Tool Carriers{4050, 4051}
Planetary Final Drives for Small and Medium Wheel Loaders and Small Integrated Tool Carriers{4050, 4051}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Operation and Maintenance Manual
Tire Inflation Pressure Adjustment
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Tire Inflation with Nitrogen
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Tire Inflation - Check
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Tire Inflation Pressure
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Specifications
Rim Mounting
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Planetary Final Drives for Small and Medium Wheel Loaders and Small Integrated Tool Carriers{4050, 4051}
Planetary Final Drives for Small and Medium Wheel Loaders and Small Integrated Tool Carriers{4050, 4051}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Disassembly and Assembly
Tire and Rim (Front) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Tire and Rim (Rear) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Service Letter-NACD
A Seal Needs To Be Added To The Axle Oil Cooler Pump On Certain 950G And 962G Wheel Loaders And IT62G Integrated Toolcarriers
A Seal Needs To Be Added To The Axle Oil Cooler Pump On Certain 950G And 962G Wheel Loaders And IT62G Integrated Toolcarriers
Service Letter-Australia
Service Letter-CFEL
Specifications
Check Valve (Axle Oil Cooler Bypass)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Axle Oil Cooler Pump and Clutch
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Temperature Switch (Axle Oil Cooler)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Temperature Switch (Front and Rear Axle Oil)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Service Letter-China
A Seal Needs To Be Added To The Axle Oil Cooler Pump On Certain 950G And 962G Wheel Loaders And IT62G Integrated Toolcarriers
A Seal Needs To Be Added To The Axle Oil Cooler Pump On Certain 950G And 962G Wheel Loaders And IT62G Integrated Toolcarriers
Service Letter-Asia
Systems Operation
Axle Oil Cooler
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train
Service Letter-APD
A Seal Needs To Be Added To The Axle Oil Cooler Pump On Certain 950G And 962G Wheel Loaders And IT62G Integrated Toolcarriers
A Seal Needs To Be Added To The Axle Oil Cooler Pump On Certain 950G And 962G Wheel Loaders And IT62G Integrated Toolcarriers
Disassembly and Assembly
Axle Oil Cooler Pump and Clutch - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Axle Oil Cooler - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Service Magazine
New Magnetic Filter for Axle Oil Cooler Lines {1365, 3004}
2004/11/01
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Planetary Final Drives for Small and Medium Wheel Loaders and Small Integrated Tool Carriers{4050, 4051}
Planetary Final Drives for Small and Medium Wheel Loaders and Small Integrated Tool Carriers{4050, 4051}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Truck sale:

Caterpillar 950G
 
Caterpillar 950G
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
129,900 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 950GC, Wheel Loaders, Construction
185,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Caterpillar 950GC, Wheel Loaders, Construction
190,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
215,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
THOMPSON TRACTOR CO., INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.