AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

980G 2Z-9980 Waste AR, 2Q-8329 Waste AR, 2Z-9981 Waste AR-High Ambient Temperature Custom Product Support Literature For 980G Wheel Loader 2KR00001-UP (MACHINE) HYDRAULIC SYSTEM Caterpillar SIS



WHEEL LOADER 980G WHEEL LOADER 2KR
 980G 2Z-9980 Waste AR, 2Q-8329 Waste AR, 2Z-9981 Waste AR-High Ambient Temperature Custom Product Support Literature For 980G Wheel Loader 2KR00001-UP (MACHINE) SEBC1279 980G 2KR   (1995)

Parts group 980G:

  For full view, you need register
HYDRAULIC SYSTEM
COOLER GP
LINES GP-HYDRAULIC OIL COOLER
189-7039 LINES GP-HYDRAULIC OIL COOLER
189-7039 LINES GP-HYDRAULIC OIL COOLER -CUSTOM
PIN 2KR3722-UP
PART OF 2Q-8414 FAN GP-REVERSIBLE
LINES GP-HYDRAULIC OIL COOLER
189-7274 LINES GP-HYDRAULIC OIL COOLER
189-7274 LINES GP-HYDRAULIC OIL COOLER
PIN 2KR3722-UP
PART OF 2Q-8414 FAN GP-REVERSIBLE
MOTOR GP
MOTOR GP-PISTON
128-0038 MOTOR GP-PISTON
128-0038 MOTOR GP-PISTON -FAN DRIVE
PIN 2KR1-UP
PART OF 2Q-8414, 2Z-9634 FAN GP-REVERSIBLE
TANK GP
TANK & FILTER GP-HYDRAULIC
4Z-6279 TANK & FILTER GP-HYDRAULIC
4Z-6279 TANK & FILTER GP-HYDRAULIC -CUSTOM
PIN 2KR1-UP
PART OF 2Z-9624 GUARD GP-FUEL TANK
VALVE GP-CHECK
128-2780 VALVE GP-CHECK
128-2780 VALVE GP-CHECK
PIN 2KR3722-UP
PART OF 174-8954 VALVE GP-FAN REVERSING
VALVE GP-SOLENOID
VALVE GP-SOLENOID
118-9701 VALVE GP-SOLENOID
118-9701 VALVE GP-SOLENOID
PIN 2KR1-UP
PART OF 119-5021 VALVE & MTG GP-FAN REVERSING
VALVE GP-SOLENOID
152-8340 VALVE GP-SOLENOID
152-8340 VALVE GP-SOLENOID
PIN 2KR3722-UP
24 VOLTS DC
PART OF 174-8954 VALVE GP-FAN REVERSING
VALVE GP-SOLENOID
152-8345 VALVE GP-SOLENOID
152-8345 VALVE GP-SOLENOID
PIN 2KR3722-UP
24 VOLT
PART OF 174-8954 VALVE GP-FAN REVERSING
VALVE GP-FAN REVERSING
VALVE & MTG GP-FAN REVERSING
119-5021 VALVE & MTG GP-FAN REVERSING
119-5021 VALVE & MTG GP-FAN REVERSING
PIN 2KR1-UP
PART OF 2Z-9634 FAN GP-REVERSIBLE
174-8954 VALVE GP-FAN REVERSING
174-8954 VALVE GP-FAN REVERSING
PIN 2KR3722-UP
PART OF 189-7039 LINES GP-HYDRAULIC OIL COOLER
Type 1
VALVE GP-FAN REVERSING
174-8954 VALVE GP-FAN REVERSING
174-8954 VALVE GP-FAN REVERSING
PIN 2KR3722-UP
PART OF 189-7039, 189-7274 LINES GP-HYDRAULIC OIL COOLER
Type 2

Information:

(For parts list, see above)

Operation and Maintenance Manual
Ride Control Accumulator - Check
980G Wheel Loader
Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Service Letter-NACD
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Modification To Ride Control Valve To Alleviate Lift Arm Movement
Modification To Ride Control Valve To Alleviate Lift Arm Movement
108-5933 Ride Control Accumulator
108-5933 Ride Control Accumulator
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Specifications
Ride Control Accumulator
980G Wheel Loader Hydraulic System
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Service Letter-China
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Ride Control Accumulator - Test and Charge
980G Wheel Loader Hydraulic System
Ride Control Pressure Equalization Time - Adjust
980G Wheel Loader Hydraulic System
Disassembly and Assembly
Ride Control Accumulator - Remove and Install
980G Wheel Loader Machine Systems
Service Magazine
Improvements To The Medium Wheel Loader Ride Control Accumulator {5004, 5077}
2011/02/21
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Operation and Maintenance Manual
Ride Control
980G Wheel Loader
Ride Control Accumulator - Check
980G Wheel Loader
Special Instruction
Installation Instructions for Improved Ride Control System{5004}
Installation Instructions for Improved Ride Control System{5004}
Technical Information Bulletin
Corrected Information Provided For 7J-5311 Warning Plate On Certain Medium Wheel Loaders And Integrated Toolcarriers Equipped With Ride Control
Corrected Information Provided For 7J-5311 Warning Plate On Certain Medium Wheel Loaders And Integrated Toolcarriers Equipped With Ride Control
Modification To Ride Control Valve To Alleviate Lift Arm Movement
Modification To Ride Control Valve To Alleviate Lift Arm Movement
108-5933 Ride Control Accumulator
108-5933 Ride Control Accumulator
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Specifications
Ride Control Accumulator
980G Wheel Loader Hydraulic System
Check Valve (Ride Control)
980G Wheel Loader Hydraulic System
Systems Operation
Ride Control System
980G Wheel Loader Hydraulic System
Testing and Adjusting
Ride Control Pressure Equalization Time - Adjust
980G Wheel Loader Hydraulic System
Disassembly and Assembly
Ride Control Valve - Remove
980G Wheel Loader Machine Systems
Ride Control Valve - Install
980G Wheel Loader Machine Systems
Ride Control Valve - Disassemble
980G Wheel Loader Machine Systems
Ride Control Valve - Assemble
980G Wheel Loader Machine Systems
Diverter Valve (Ride Control) - Remove
980G Wheel Loader Machine Systems
Diverter Valve (Ride Control) - Disassemble
980G Wheel Loader Machine Systems
Diverter Valve (Ride Control) - Install
980G Wheel Loader Machine Systems
Diverter Valve (Ride Control) - Assemble
980G Wheel Loader Machine Systems
Service Magazine
Special Instruction, "Installation Instructions For Improved Ride Control System", Now Available {0374,1408,4812,5051,5057,5077,5479,7332}
1999/02/08
New Check Valve For The Ride Control System {5067}
2003/09/08
New Tightening Procedure For 129-0987 Drain Assembly{3001,3002,3030,3101,3159,5056}
1998/03/16
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TUBE IN HYDRAULIC OIL COOLER LINES GROUP ON CERTAIN 980G MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TUBE IN HYDRAULIC OIL COOLER LINES GROUP ON CERTAIN 980G MEDIUM WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Modification To Cooling System Prevents Hydraulic Oil System Overheating In Very Cold Operating Environments
Modification To Cooling System Prevents Hydraulic Oil System Overheating In Very Cold Operating Environments
Correct Operation Of Machines Equipped With "On Demand Fan"
Correct Operation Of Machines Equipped With "On Demand Fan"
Specifications
Check Valve (Hydraulic Oil Cooler Bypass)
980G Wheel Loader Hydraulic System
Thermostatic Valve (Hydraulic Fan)
980G Wheel Loader Hydraulic System
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TUBE IN HYDRAULIC OIL COOLER LINES GROUP ON CERTAIN 980G MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TUBE IN HYDRAULIC OIL COOLER LINES GROUP ON CERTAIN 980G MEDIUM WHEEL LOADERS
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Hydraulic Oil Cooler - Remove and Install
980G Wheel Loader Engine Supplement
Service Magazine
Updated Clipping Method Improves Durability Of Fan Motor Inlet Tube Assemblies{5057}
1997/12/08
New Hose Assembly Routing For Hydraulic Oil Cooler Lines Group {1374,5057}
1998/08/31
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Operation and Maintenance Manual
Bucket Linkage and Loader Cylinder Bearings - Lubricate
980G Wheel Loader
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Lift Cylinder Hoses May Interfere With The Non-Engine End Frame
Lift Cylinder Hoses May Interfere With The Non-Engine End Frame
113-1721 Tube Assembly Failure
113-1721 Tube Assembly Failure
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Tilt Cylinder
980G Wheel Loader Hydraulic System
Tilt Cylinder (Logging)
980G Wheel Loader Hydraulic System
Tilt Cylinder (High Lift)
980G Wheel Loader Hydraulic System
Lift Cylinder
980G Wheel Loader Hydraulic System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
Testing and Adjusting
Lift and Tilt Cylinder Drift - Check
980G Wheel Loader Hydraulic System
Lift Cylinder - Isolation and Drift Check
980G Wheel Loader Hydraulic System
Ride Control Pressure Equalization Time - Adjust
980G Wheel Loader Hydraulic System
Tilt Cylinder - Isolation and Drift Check
980G Wheel Loader Hydraulic System
Implement Cycle Time - Check
980G Wheel Loader Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Tilt Cylinder - Remove and Install
980G Wheel Loader Machine Systems
Lift Cylinder - Remove and Install
980G Wheel Loader Machine Systems
Service Magazine
Retaining Ring Replaces Four Bolts And Washers for Wiper Seal In Tilt Cylinder Groups {5104,7526}
1998/02/02
Steering Cylinder Seal Assembly Available{4303}
1998/07/13
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Corrections to Specifications , "Lift Cylinder" {5102}
2003/10/06
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24
Operation and Maintenance Manual
Oil Filter - Inspect
980G Wheel Loader
Hydraulic System Oil Filter - Replace
980G Wheel Loader
Hydraulic System Biodegradable Oil Filter Restriction - Check - If Equipped
980G Wheel Loader
Hydraulic System Biodegradable Oil Filter Element - Replace - If Equipped
980G Wheel Loader
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Specifications
Oil Filter (Biodegradable Hydraulic)
980G Wheel Loader Hydraulic System
Oil Filter (Hydraulic)
980G Wheel Loader Hydraulic System
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Addition of Serial Numbers to An Improved Bypass Switch Is Now Used {1435}
2000/05/01
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
New Advanced Efficiency Filters Are Now Available for the Transmission Assembly and the Torque Converter Assembly Used on Certain Wheel Loaders {1408, 1435, 3004, 3006, 3067, 5068}
2011/07/07
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Service Letter-NACD
Remove All 9X2354 Hose From Parts Stock
Remove All 9X2354 Hose From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Operation and Maintenance Manual
Bucket Lift Kickout
980G Wheel Loader
Bucket Positioner
980G Wheel Loader
Bucket Lift Kickout Control
980G Wheel Loader
Service Letter-NACD
Product Support Program For Updating The Electronic Hydraulic Control Hardware On Certain 980G Wheel Loaders
Product Support Program For Updating The Electronic Hydraulic Control Hardware On Certain 980G Wheel Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Tilt Kickout Switch Adjustment May Be Necessary When Implementing PS8851, &quot;PSP For Replacing The Implement System Electronic Control On Certain 980G Wheel Loaders&quot;.
Tilt Kickout Switch Adjustment May Be Necessary When Implementing PS8851, "PSP For Replacing The Implement System Electronic Control On Certain 980G Wheel Loaders".
Service Letter-China
Product Support Program For Updating The Electronic Hydraulic Control Hardware On Certain 980G Wheel Loaders
Product Support Program For Updating The Electronic Hydraulic Control Hardware On Certain 980G Wheel Loaders
Service Letter-Asia
Systems Operation
Kickout System
980G Wheel Loader Hydraulic System
Sensors
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
Service Letter-APD
Product Support Program For Updating The Electronic Hydraulic Control Hardware On Certain 980G Wheel Loaders
Product Support Program For Updating The Electronic Hydraulic Control Hardware On Certain 980G Wheel Loaders
Testing and Adjusting
Lift Kickout and Bucket Positioner - Adjust
980G Wheel Loader Hydraulic System
Position Sensor (Lift Linkage) - Calibrate
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
Position Sensor (Lift Linkage) - Adjust
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
Troubleshooting
MID 082 - CID 0350 - FMI 00
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0350 - FMI 01
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0350 - FMI 02
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0350 - FMI 08
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0350 - FMI 13
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 074 - CID 0350 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0350 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0350 - FMI 13
Payload Control System (PCS) 2.X
Disassembly and Assembly
Work Tool Positioner Control - Remove and Install
980G Wheel Loader Machine Systems
Lift Kickout Control - Remove and Install
980G Wheel Loader Machine Systems
Service Magazine
Tilt Kickout Adjustment for Electro-Hydraulic Systems {6540}
2001/04/16
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Service Letter-NACD
Remove All 9X2354 Hose From Parts Stock
Remove All 9X2354 Hose From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Special Instruction
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
New Protective Caps For Hose Clamps Are Now Available {5057}
2001/11/19
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Special Instruction
Installation Procedure for the Implement Lines Group{5057}
Installation Procedure for the Implement Lines Group{5057}
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Letter-NACD
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Special Instruction
Installation Procedure for the Implement Lines Group{5057}
Installation Procedure for the Implement Lines Group{5057}
Service Letter-NACD
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Service Letter-NACD
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
Service Letter-Australia
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
Service Letter-CFEL
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
Service Letter-CSARL
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
Service Letter-Americas
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
Service Letter-Brazil
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
Technical Information Bulletin
Lift Cylinder Hoses May Interfere With The Non-Engine End Frame
Lift Cylinder Hoses May Interfere With The Non-Engine End Frame
Service Letter-China
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
Service Letter-Asia
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Letter-APD
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
The 1162155 Manifold Needs To Be Inspected And/Or Replaced On Certain 980G Wheel Loaders
Service Magazine
Medium Wheel Loader Hydraulic Lines For the Lift Cylinder Have Been Improved {5057, 5102}
2009/12/07
Service Letter-NACD
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Special Instruction
Installation Procedure for the 222-5269 Front Lines Gp {5057, 6129}
Installation Procedure for the 222-5269 Front Lines Gp {5057, 6129}
Installation Procedure for the Implement Lines Group{5057}
Installation Procedure for the Implement Lines Group{5057}
Service Letter-NACD
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
An Unexpected Drop Of The Lift Arms Can Occur On Certain 980G Wheel Loaders
An Unexpected Drop Of The Lift Arms Can Occur On Certain 980G Wheel Loaders
Service Letter-Australia
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
An Unexpected Drop Of The Lift Arms Can Occur On Certain 980G Wheel Loaders
An Unexpected Drop Of The Lift Arms Can Occur On Certain 980G Wheel Loaders
Service Letter-Brazil
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-China
Service Letter-Asia
Service Letter-APD
Operation and Maintenance Manual
Hydraulic Tank Breaker Relief Valve - Clean
980G Wheel Loader
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Installation Procedure for the Implement Lines Group{5057}
Installation Procedure for the Implement Lines Group{5057}
Service Letter-NACD
Remove All 9X2354 Hose From Parts Stock
Remove All 9X2354 Hose From Parts Stock
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
An Unexpected Drop Of The Lift Arms Can Occur On Certain 980G Wheel Loaders
An Unexpected Drop Of The Lift Arms Can Occur On Certain 980G Wheel Loaders
Service Letter-Australia
Remove All 9X2354 Hose From Parts Stock
Remove All 9X2354 Hose From Parts Stock
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-CFEL
Remove All 9X2354 Hose From Parts Stock
Remove All 9X2354 Hose From Parts Stock
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-CSARL
Remove All 9X2354 Hose From Parts Stock
Remove All 9X2354 Hose From Parts Stock
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Americas
Remove All 9X2354 Hose From Parts Stock
Remove All 9X2354 Hose From Parts Stock
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
An Unexpected Drop Of The Lift Arms Can Occur On Certain 980G Wheel Loaders
An Unexpected Drop Of The Lift Arms Can Occur On Certain 980G Wheel Loaders
Service Letter-Brazil
Remove All 9X2354 Hose From Parts Stock
Remove All 9X2354 Hose From Parts Stock
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Technical Information Bulletin
8C-3446 Fluid Sampling Valve And 6V-3965 Nipple Assembly May Leak
8C-3446 Fluid Sampling Valve And 6V-3965 Nipple Assembly May Leak
Hydraulic System May Pulsate when the Machine is at Low Idle and the Lift Arm Lower Function is in the "FLOAT" Position
Hydraulic System May Pulsate when the Machine is at Low Idle and the Lift Arm Lower Function is in the "FLOAT" Position
Fan Reversing Valve Failures
Fan Reversing Valve Failures
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Breaker Relief Valve
980G Wheel Loader Hydraulic System
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Service Letter-China
Remove All 9X2354 Hose From Parts Stock
Remove All 9X2354 Hose From Parts Stock
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Asia
Remove All 9X2354 Hose From Parts Stock
Remove All 9X2354 Hose From Parts Stock
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Letter-APD
Remove All 9X2354 Hose From Parts Stock
Remove All 9X2354 Hose From Parts Stock
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Magazine
New Hose Assembly Routing For Hydraulic Oil Cooler Lines Group {1374,5057}
1998/08/31
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Service Letter-NACD
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Fan Reversing Valve Failures
Fan Reversing Valve Failures
Specifications
Thermostatic Valve (Hydraulic Fan)
980G Wheel Loader Hydraulic System
Service Letter-China
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Asia
Service Letter-APD
Service Letter-NACD
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Service Letter-Australia
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Service Letter-CFEL
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Service Letter-CSARL
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Service Letter-Americas
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Service Letter-Brazil
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Service Letter-China
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Service Letter-Asia
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Service Letter-APD
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Service Magazine
New Solenoid Valve Eliminates Need For Orifices In Pilot Lines For Some Wheel Loaders {5059,5479}
1998/08/31
Service Letter-NACD
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Service Letter-China
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Asia
Service Letter-APD
Special Instruction
Installation Instructions for Improved Ride Control System{5004}
Installation Instructions for Improved Ride Control System{5004}
Service Letter-NACD
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Ride Control Accumulator - Test and Charge
980G Wheel Loader Hydraulic System
Service Magazine
New Check Valve For The Ride Control System {5067}
2003/09/08
Service Letter-NACD
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
Joint Compound Needs To Be Applied To The Fan Adapter To Improve The Service Life Of The Tapered Retention Joint On Certain 980G Wheel Loaders
Joint Compound Needs To Be Applied To The Fan Adapter To Improve The Service Life Of The Tapered Retention Joint On Certain 980G Wheel Loaders
Internal Components Of The Hydraulic Fan Motors May Have Been Damaged During Assembly And Need To Be Replaced On Certain 980G Wheel Loaders
Internal Components Of The Hydraulic Fan Motors May Have Been Damaged During Assembly And Need To Be Replaced On Certain 980G Wheel Loaders
Technical Information Bulletin
Correct Operation Of Machines Equipped With &quot;On Demand Fan&quot;
Correct Operation Of Machines Equipped With "On Demand Fan"
Specifications
Piston Motor (Hydraulic Fan)
980G Wheel Loader Hydraulic System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Piston Motor (Hydraulic Fan)
980G Wheel Loader Hydraulic System
Hydraulic Fan System - Machines that are Not Equipped with the On Demand Fan
980G Wheel Loader Hydraulic System
Hydraulic Fan System - For Machines that are Equipped with the On Demand Fan
980G Wheel Loader Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Hydraulic Fan Speed - Test and Adjust
980G Wheel Loader Hydraulic System
Hydraulic Fan Speed (On Demand) - Test and Adjust
980G Wheel Loader Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Fan and Piston Motor (Hydraulic Fan) - Remove
980G Wheel Loader Machine Systems
Fan and Piston Motor (Hydraulic Fan) - Install
980G Wheel Loader Machine Systems
Piston Motor (Hydraulic Fan) - Disassemble
980G Wheel Loader Machine Systems
Piston Motor (Hydraulic Fan) - Assemble
980G Wheel Loader Machine Systems
Service Magazine
Correct Retaining Ring Specified For Shaft Seal In Piston Motor Group For Fan Drive{5058}
1997/10/20
Additional Information on the On Demand Fan for Wheel Loaders {1386, 1387}
2001/05/14
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED VANE-TYPE IMPLEMENT PUMP WITH A GEAR-TYPE PUMP ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED VANE-TYPE IMPLEMENT PUMP WITH A GEAR-TYPE PUMP ON CERTAIN 980G WHEEL LOADERS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED VANE-TYPE IMPLEMENT PUMP WITH A GEAR-TYPE PUMP ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED VANE-TYPE IMPLEMENT PUMP WITH A GEAR-TYPE PUMP ON CERTAIN 980G WHEEL LOADERS
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED VANE-TYPE IMPLEMENT PUMP WITH A GEAR-TYPE PUMP ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED VANE-TYPE IMPLEMENT PUMP WITH A GEAR-TYPE PUMP ON CERTAIN 980G WHEEL LOADERS
Service Letter-Brazil
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Service Letter-Truck/Ag/Marine
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
Technical Information Bulletin
3L1425 Failures Of The Main Bearing For The Implement Pump
3L1425 Failures Of The Main Bearing For The Implement Pump
Correct Operation Of Machines Equipped With &quot;On Demand Fan&quot;
Correct Operation Of Machines Equipped With "On Demand Fan"
PROCEDURE TO DETERMINE WHICH SEAL IS LEAKING ON STEERING PUMPS ON 950/962 Series G/G II &amp; 980 Series G/G II/H WHEEL LOADERS
PROCEDURE TO DETERMINE WHICH SEAL IS LEAKING ON STEERING PUMPS ON 950/962 Series G/G II & 980 Series G/G II/H WHEEL LOADERS
Supplemental Steering Pump Housing Cracking{4304, 4306, 5073}
Supplemental Steering Pump Housing Cracking{4304, 4306, 5073}
Specifications
Gear Pump (Pilot and Braking)
980G Wheel Loader Hydraulic System
Vane Pump (Implement and Hydraulic Fan)
980G Wheel Loader Hydraulic System
Vane Pump (Implement)
980G Wheel Loader Hydraulic System
Gear Pump (Hydraulic Fan)
980G Wheel Loader Hydraulic System
Piston Pump (Hydraulic Fan)
980G Wheel Loader Hydraulic System
Vane Pump (Implement)
980G Wheel Loader Hydraulic System
Pump Control Valve (Hydraulic Fan)
980G Wheel Loader Hydraulic System
Gear Pump (Implement)
980G Wheel Loader Hydraulic System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
Systems Operation
Gear Pump (Pilot and Braking)
980G Wheel Loader Hydraulic System
Hydraulic Fan System - Machines that are Not Equipped with the On Demand Fan
980G Wheel Loader Hydraulic System
Vane Pump (Implement)
980G Wheel Loader Hydraulic System
Gear Pump (Hydraulic Fan)
980G Wheel Loader Hydraulic System
Vane Pump (Hydraulic Fan)
980G Wheel Loader Hydraulic System
Piston Pump (Hydraulic Fan)
980G Wheel Loader Hydraulic System
Hydraulic Fan System - For Machines that are Equipped with the On Demand Fan
980G Wheel Loader Hydraulic System
Gear Pump (Implement)
980G Wheel Loader Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
Product Support Program For Updating The Hydraulic Fan System To Improve Life Of The Fan Pump On Certain 826G Compactors
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE VANE FAN AND IMPLEMENT PUMPS THAT EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
Testing and Adjusting
Torque Converter Stall and Implement Pump Double Stall - Test
980G Wheel Loader Hydraulic System
Hydraulic Fan Speed - Test and Adjust
980G Wheel Loader Hydraulic System
Pump Performance (Implement) - Test
980G Wheel Loader Hydraulic System
Hydraulic Fan Speed (On Demand) - Test and Adjust
980G Wheel Loader Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}
Disassembly and Assembly
Vane Pump (Implement) - Remove
980G Wheel Loader Machine Systems
Vane Pump (Implement) - Install
980G Wheel Loader Machine Systems
Vane Pump (Implement) - Disassemble
980G Wheel Loader Machine Systems
Vane Pump (Implement) - Assemble
980G Wheel Loader Machine Systems
Vane Pump (Hydraulic Fan) - Remove
980G Wheel Loader Machine Systems
Vane Pump (Hydraulic Fan) - Install
980G Wheel Loader Machine Systems
Vane Pump (Hydraulic Fan) - Disassemble
980G Wheel Loader Machine Systems
Vane Pump (Hydraulic Fan) - Assemble
980G Wheel Loader Machine Systems
Gear Pump (Hydraulic Fan) - Remove
980G Wheel Loader Machine Systems
Gear Pump (Hydraulic Fan) - Install
980G Wheel Loader Machine Systems
Gear Pump (Hydraulic Fan) - Disassemble
980G Wheel Loader Machine Systems
Gear Pump (Pilot, Brake) - Remove
980G Wheel Loader Machine Systems
Gear Pump (Pilot, Brake) - Install
980G Wheel Loader Machine Systems
Gear Pump (Hydraulic Fan) - Assemble
980G Wheel Loader Machine Systems
Service Magazine
New Implement Cartridge Used In Vane Pump Group{5055}
1996/10/21
New Vane Pump Group, Assures Clearance For Drive Gear, And Correct Alignment Of Vane Pump Group With Torque Converter Cover{5055}
1997/10/27
Correction To Parts Manual, SEBP2395-04 {0374,5055}
1998/10/05
Correction To Systems Operation Testing And Adjusting Manual, SENR5883-02 {0374,3101,5055}
1998/11/23
The Swashplate Stop for the Piston Pump is now Retained with a Dowel Pin {5070}
2000/08/14
Additional Information on the On Demand Fan for Wheel Loaders {1386, 1387}
2001/05/14
Improved Analysis of Non-Warrantable Failures for Reman Vane Cartridges {5055}
2004/07/05
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Wear that is Acceptable in Specific Gear Pumps {4007, 5073, 5073, 7516}
2008/02/04
A New Service Tool for Installing the Service Sleeve Bearings in Hydraulic Gear Pumps Is Now Available for Certain CAT Machines {0738, 5073, 5073, 7551}
2011/12/15
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/01/27
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Operation and Maintenance Manual
Oil Filter - Inspect
980G Wheel Loader
Hydraulic System Oil Level - Check
980G Wheel Loader
Hydraulic System Oil Filter - Replace
980G Wheel Loader
Hydraulic System Oil - Change
980G Wheel Loader
Hydraulic System Biodegradable Oil Filter Restriction - Check - If Equipped
980G Wheel Loader
Special Instruction
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Hydraulic System Cleanup Recommendations Following Catastrophic Component Failures on Wheel Loader Hydraulic Systems {0645, 0680, 0738, 0768, 5050, 5056, 5095}
Hydraulic System Cleanup Recommendations Following Catastrophic Component Failures on Wheel Loader Hydraulic Systems {0645, 0680, 0738, 0768, 5050, 5056, 5095}
Technical Information Bulletin
Hydraulic System May Pulsate when the Machine is at Low Idle and the Lift Arm Lower Function is in the "FLOAT" Position
Hydraulic System May Pulsate when the Machine is at Low Idle and the Lift Arm Lower Function is in the "FLOAT" Position
HYDRAULIC TANK FILLER TUBE STRAINER MAY RUST
HYDRAULIC TANK FILLER TUBE STRAINER MAY RUST
Specifications
Hydraulic Tank and Filter
980G Wheel Loader Hydraulic System
Hydraulic Tank
980G Wheel Loader Hydraulic System
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Disassembly and Assembly
Hydraulic Tank - Remove
980G Wheel Loader Machine Systems
Hydraulic Tank - Disassemble
980G Wheel Loader Machine Systems
Hydraulic Tank - Assemble
980G Wheel Loader Machine Systems
Hydraulic Tank - Install
980G Wheel Loader Machine Systems
Service Magazine
New Tightening Procedure For 129-0987 Drain Assembly{3001,3002,3030,3101,3159,5056}
1998/03/16
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Barrel Adapter Allows Technician to Attach Filter Unit to Barrel {0645, 0680}
2006/02/13
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
A Plate is Now Used to Reinforce the Hydraulic Tank {5056, 5056}
2008/12/29
New Pressure Relief Breather for Hydraulic Tank Is Now Used on Certain Cat Products {1354}
New Pressure Relief Breather for Hydraulic Tank Is Now Used on Certain Cat Products {1354}
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Hydraulic System Cleanup Recommendations Following Catastrophic Component Failures on Wheel Loader Hydraulic Systems {0645, 0680, 0738, 0768, 5050, 5056, 5095}
Hydraulic System Cleanup Recommendations Following Catastrophic Component Failures on Wheel Loader Hydraulic Systems {0645, 0680, 0738, 0768, 5050, 5056, 5095}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Service Magazine
New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Barrel Adapter Allows Technician to Attach Filter Unit to Barrel {0645, 0680}
2006/02/13
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
A New Service Tool for Installing the Service Sleeve Bearings in Hydraulic Gear Pumps Is Now Available for Certain CAT Machines {0738, 5073, 5073, 7551}
2011/12/15
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Operation and Maintenance Manual
Hydraulic Tank Breaker Relief Valve - Clean
980G Wheel Loader
Specifications
Breaker Relief Valve
980G Wheel Loader Hydraulic System
Service Letter-NACD
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New Check Valve For The Ride Control System {5067}
2003/09/08
Service Letter-NACD
Product Support Program For Installation Of A Rubber Deflector To The Implement Control Levers To Reduce Bearing Contamination On Certain 980G Loaders
Product Support Program For Installation Of A Rubber Deflector To The Implement Control Levers To Reduce Bearing Contamination On Certain 980G Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
Service Letter-Australia
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
Service Letter-CFEL
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
Service Letter-CSARL
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
Service Letter-Americas
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
Specifications
Main Control Valve
980G Wheel Loader Hydraulic System
Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
Service Letter-Asia
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
Systems Operation
Main Control Valve
980G Wheel Loader Hydraulic System
Service Letter-APD
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
Testing and Adjusting
Pilot Control Valve Chamber Pressure - Check
980G Wheel Loader Hydraulic System
Diverter Valve (Ride Control) - Isolation and Drift Check
980G Wheel Loader Hydraulic System
Disassembly and Assembly
Main Control Valve - Remove
980G Wheel Loader Machine Systems
Main Control Valve - Install
980G Wheel Loader Machine Systems
Main Control Valve - Disassemble
980G Wheel Loader Machine Systems
Main Control Valve - Assemble
980G Wheel Loader Machine Systems
Service Magazine
A New Guard for the Main Control Valve is Available {5051, 5051}
2002/03/18
A New Filter Screen May be Installed in the Dead Engine Lower System and the Implement Pilot System {5051}
2003/02/24
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
New Tube Assembly is Available for Wheel Loaders {5051, 5057}
2005/10/24
Correction to Specifications , "Main Control Valve" {5051}
2006/03/06
Correction to Specifications , "Main Control Valve" {5051}
2006/09/11
New Material Is Now Used for the Main Control Valve {5051}
2007/04/02
Adjustment Procedure For Retainer And Return Springs For Valve Stems In Main Control Valve Group {5051}
2008/11/24
Specifications
Check Valve (Hydraulic Oil Cooler Bypass)
980G Wheel Loader Hydraulic System
Diverter Valve (Ride Control)
980G Wheel Loader Hydraulic System
Testing and Adjusting
Diverter Valve (Ride Control) - Isolation and Drift Check
980G Wheel Loader Hydraulic System
Disassembly and Assembly
Diverter Valve (Ride Control) - Remove
980G Wheel Loader Machine Systems
Diverter Valve (Ride Control) - Disassemble
980G Wheel Loader Machine Systems
Diverter Valve (Ride Control) - Install
980G Wheel Loader Machine Systems
Diverter Valve (Ride Control) - Assemble
980G Wheel Loader Machine Systems
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Special Instruction
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Service Letter-NACD
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Letter-NACD
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
Service Letter-Australia
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
Service Letter-CFEL
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
Service Letter-CSARL
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
Service Letter-Americas
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
Specifications
Pilot Valve (Oil Manifold)
980G Wheel Loader Hydraulic System
Pressure Reducing Valve
980G Wheel Loader Hydraulic System
Service Letter-China
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
Service Letter-Asia
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
Systems Operation
Pilot Valve
980G Wheel Loader Hydraulic System
Service Letter-APD
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Updating The Temperature Sensors, Pilot Line Routing And The Implement Valve Pilot Hose Assembly On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
Testing and Adjusting
Pilot Control Valve Chamber Pressure - Check
980G Wheel Loader Hydraulic System
Pilot Control Valve (Implement System) Internal Leakage - Test
980G Wheel Loader Braking System
Maximum Modulation Current to Solenoid Valves - Calibrate
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
Start of Modulation Current to Solenoid Valves - Calibrate
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
Solenoid Valve (Bucket Raise and Lower) - Calibrate
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
Troubleshooting
MID 082 - CID 0354 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0354 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0354 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0355 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0355 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0355 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0356 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0356 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0356 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0357 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0357 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0357 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0491 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0358 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0358 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0358 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0491 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0491 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0492 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0492 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0492 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0354 - FMI 12
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0355 - FMI 12
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0356 - FMI 12
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0357 - FMI 12
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0491 - FMI 12
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0492 - FMI 12
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
Disassembly and Assembly
Pilot Valve (Oil Manifold) - Disassemble
980G Wheel Loader Machine Systems
Pilot Valve (Oil Manifold) - Assemble
980G Wheel Loader Machine Systems
Service Magazine
Improved Pilot Valve Group Now Available {4805}
1998/08/17
New Solenoid Valve Eliminates Need For Orifices In Pilot Lines For Some Wheel Loaders {5059,5479}
1998/08/31
Special Instruction, REHS0209, &quot;Installation Of Selector And Pressure Control Valve&quot; Available {0374,4349}
1998/05/25
Specifications
Pressure Reducing Valve
980G Wheel Loader Hydraulic System
Service Magazine
A New Pressure Reducing Valve Is Now Available {5467}
2004/11/29
Technical Information Bulletin
Warming The Hydraulic System
Warming The Hydraulic System
Specifications
Relief Valve (Main)
980G Wheel Loader Hydraulic System
Relief Valve (Line)
980G Wheel Loader Hydraulic System
Relief Valve (Ride Control)
980G Wheel Loader Hydraulic System
Tool Operating Manual
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Systems Operation
Relief Valve (Main)
980G Wheel Loader Hydraulic System
Relief Valve (Line)
980G Wheel Loader Hydraulic System
Testing and Adjusting
Relief Valve (Main) - Test and Adjust
980G Wheel Loader Hydraulic System
Relief Valve (Line) - Test and Adjust
980G Wheel Loader Hydraulic System
Technical Information Bulletin
Modification To Ride Control Valve To Alleviate Lift Arm Movement
Modification To Ride Control Valve To Alleviate Lift Arm Movement
Specifications
Relief Valve (Ride Control)
980G Wheel Loader Hydraulic System
Ride Control Valve
980G Wheel Loader Hydraulic System
Disassembly and Assembly
Ride Control Valve - Remove
980G Wheel Loader Machine Systems
Ride Control Valve - Install
980G Wheel Loader Machine Systems
Ride Control Valve - Disassemble
980G Wheel Loader Machine Systems
Ride Control Valve - Assemble
980G Wheel Loader Machine Systems
Service Magazine
Special Instruction, REHS0209, &quot;Installation Of Selector And Pressure Control Valve&quot; Available {0374,4349}
1998/05/25
Service Letter-NACD
The 1411481 Shuttle Valve Group Needs To Be Replaced On Certain 980G Wheel Loaders
The 1411481 Shuttle Valve Group Needs To Be Replaced On Certain 980G Wheel Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
The Reliability of the Shuttle Valve Has Been Improved {4289, 5079}
2005/06/13
Service Letter-NACD
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Solenoid Valve (Pilot Proportioning)
980G Wheel Loader Hydraulic System
Solenoid Valve (Ride Control)
980G Wheel Loader Hydraulic System
Solenoid Valve (Pilot Pressure Supply)
980G Wheel Loader Hydraulic System
Service Letter-China
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
Service Letter-Asia
Systems Operation
Solenoid Valves
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
Solenoid Valves
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
Service Letter-APD
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable &quot;On/Off&quot; Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
A New Manual Valve Group Allowing For Lift Arm Lowering Capability With An Inoperable "On/Off" Hydraulic Pilot Solenoid Needs To Be Installed On Certain 980G Wheel Loaders
Testing and Adjusting
Calibration
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
Maximum Modulation Current to Solenoid Valves - Calibrate
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
Start of Modulation Current to Solenoid Valves - Calibrate
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
Solenoid Valve (Bucket Raise and Lower) - Calibrate
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
Troubleshooting
MID 082 - CID 0354 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0354 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0354 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0355 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0355 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0355 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0356 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0356 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0356 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0357 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0357 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0357 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0491 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0358 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0358 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0358 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0491 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0491 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0492 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0492 - FMI 03
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0492 - FMI 05
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0354 - FMI 12
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0355 - FMI 12
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0356 - FMI 12
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0357 - FMI 12
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0491 - FMI 12
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 082 - CID 0492 - FMI 12
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System
MID 081 - CID 0363 - FMI 03
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0363 - FMI 05
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0363 - FMI 06
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0149 - FMI 03
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0149 - FMI 05
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0149 - FMI 06
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
Service Magazine
Improved Pilot Valve Group Now Available {4805}
1998/08/17
New Solenoid Valve Eliminates Need For Orifices In Pilot Lines For Some Wheel Loaders {5059,5479}
1998/08/31
Improved Solenoid Valve Group Available {5479}
1999/01/25
A New Coil Assembly is Now Used {5479}
2011/05/04
Service Letter-NACD
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Fan Reversing Valve Failures
Fan Reversing Valve Failures
Service Letter-China
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
An Improved 3rd Lever Implement Control Needs Parts Stock To Be Installed To Eliminate The Possibility Of Inadvertent Reversing Of 3rd Lever When Updating Software On Certain 980G Wheel Loaders
Service Letter-Asia
Service Letter-APD

Truck sale:

Caterpillar 980G
 
Caterpillar 980G
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
 
78,208 
Caterpillar 980G, Wheel Loaders, Construction


 
69,976 
Caterpillar 980G, Wheel Loaders, Construction


Caterpillar 980G
 
Caterpillar 980G
- Wheel Loaders
ZIEGLER CAT
 
368,500 
Caterpillar 980G, Wheel Loaders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.