AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

980G 2Z-9980 Waste AR, 2Q-8329 Waste AR, 2Z-9981 Waste AR-High Ambient Temperature Custom Product Support Literature For 980G Wheel Loader 2KR00001-UP (MACHINE) POWER TRAIN Caterpillar SIS



WHEEL LOADER 980G WHEEL LOADER 2KR
 980G 2Z-9980 Waste AR, 2Q-8329 Waste AR, 2Z-9981 Waste AR-High Ambient Temperature Custom Product Support Literature For 980G Wheel Loader 2KR00001-UP (MACHINE) SEBC1279 980G 2KR   (1995)

Parts group 980G:

  For full view, you need register
POWER TRAIN
GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
2Q-7705 GAUGE GP-OIL LEVEL (DIPSTICK)
2Q-7705 GAUGE GP-OIL LEVEL (DIPSTICK) -POWERTRAIN-CUSTOM
PIN 2KR1-UP
PART OF 2Q-8329, 2Z-9980 WASTE AR
SHAFT GP
2Q-7713 GUARD GP-DRIVE SHAFT
2Q-7713 GUARD GP-DRIVE SHAFT -CUSTOM
PIN 2KR1-UP
PART OF 2Q-8329, 2Z-9980 WASTE AR
TRANSMISSION GP
SUPPORT GP-ENGINE & TMSN
116-7367 SUPPORT GP-ENGINE & TMSN
116-7367 SUPPORT GP-ENGINE & TMSN
PIN 2KR1-UP
PART OF 2Q-7222 SUPPORT GP-ENGINE
GAUGE GP-OIL LEVEL (DIPSTICK)
2Q-7705 GAUGE GP-OIL LEVEL (DIPSTICK)
2Q-7705 GAUGE GP-OIL LEVEL (DIPSTICK) -POWERTRAIN-CUSTOM
PIN 2KR1-UP
PART OF 2Q-8329, 2Z-9980 WASTE AR

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Service Magazine
Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Operation and Maintenance Manual
Axle Oscillation Bearings - Lubricate
980G Wheel Loader
Differential and Final Drive Oil - Change
980G Wheel Loader
Differential and Final Drive Oil Level - Check
980G Wheel Loader
Service Brake Control
980G Wheel Loader
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Dimensions for Oscillating Rear Axle Components and Supports{3278, 3282}
Dimensions for Oscillating Rear Axle Components and Supports{3278, 3282}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Letter-NACD
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Casting Irregularities In Some 105-8698 Axle Housings And 105-8699 Axle Housings May Allow Oil Seepage In Certain Areas Of The Axle Housing
Casting Irregularities In Some 105-8698 Axle Housings And 105-8699 Axle Housings May Allow Oil Seepage In Certain Areas Of The Axle Housing
The Final Drive Wheel Bearing Retainer Plate 108-0059 On The Machines Listed Above May Need To Be Replaced.
The Final Drive Wheel Bearing Retainer Plate 108-0059 On The Machines Listed Above May Need To Be Replaced.
Specifications
Fixed Axle (Front)
980G Wheel Loader Power Train
Oscillating Axle (Rear)
980G Wheel Loader Power Train
Final Drive and Wheel
980G Wheel Loader Power Train
Service Letter-China
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
Service Letter-Asia
Systems Operation
Final Drive and Wheel
980G Wheel Loader Power Train
Reuse And Salvage Guidelines
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion {0679, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion {0679, 3268}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
980 Non-Engine End Frame Axle Mount Pad Cracking Repair{3013, 3278}
980 Non-Engine End Frame Axle Mount Pad Cracking Repair{3013, 3278}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
Product Support Program For Replacing The Wheel Bearing Retainer Plate In Final Drive On Certain 824G, 834B, 825G, 826G, 836C Compactors And 980G And 988F II Wheel Loaders
Testing and Adjusting
Differential and Final Drive Troubleshooting
980G Wheel Loader Power Train
Wheel Bearings - Adjust
980G Wheel Loader Power Train
Disassembly and Assembly
Duo-Cone Conventional Seals - Install
980G Wheel Loader Power Train
Fixed Axle (Front) - Remove and Install
980G Wheel Loader Power Train
Oscillating Axle (Rear) - Remove and Install
980G Wheel Loader Power Train
Trunnion Support (Oscillating Axle, Front) - Remove and Install
980G Wheel Loader Power Train
Trunnion Support (Oscillating Axle, Rear) - Remove and Install
980G Wheel Loader Power Train
Axle Shaft - Remove and Install
980G Wheel Loader Power Train
Final Drive, Brake and Wheel - Remove
980G Wheel Loader Power Train
Final Drive Planetary Carrier - Disassemble
980G Wheel Loader Power Train
Final Drive Planetary Carrier - Assemble
980G Wheel Loader Power Train
Final Drive and Wheel - Disassemble
980G Wheel Loader Power Train
Final Drive and Wheel - Assemble
980G Wheel Loader Power Train
Final Drive Spindle and Service Brake - Disassemble
980G Wheel Loader Power Train
Final Drive, Brake and Wheel - Install
980G Wheel Loader Power Train
Final Drive Spindle and Service Brake - Assemble
980G Wheel Loader Power Train
Differential and Bevel Gear - Remove
980G Wheel Loader Power Train
Differential and Bevel Gear - Install
980G Wheel Loader Power Train
Service Magazine
New Seals And Retainers Improve Service Life Of The Front Axle Input Yoke And Rear Axle Input Yoke {3250}
1997/03/03
New Brake Piston D-ring Seals Improve Service Life Of The Service Brake Group {4251}
1999/03/22
A Special Instruction Is Available for the Dimensions of Oscillating Rear Axle Components and Supports on Wheel Loaders and Integrated Toolcarriers {3278}
2000/07/24
Correction to the Allowable Oil Viscosity on the Driveline {3258, 4011, 4051, 7581}
2001/01/22
New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
2001/01/22
New Tools are Available for Removing and Installing the Bolts of the Retainer Plate for the Bearing of the Final Drive {0727, 4050}
2002/07/15
The Relief Fitting for the Rear Axle is Relocated {3260}
2002/09/30
A New Retainer Plate For The Final Drive Bearing And Thrust Washer Improves The Service Life {4050}
2004/02/16
A New Retainer Plate For The Final Drive Bearing And Thrust Washer Improves The Service Life {4050}
2004/03/22
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Correction toTesting and Adjusting , "Service Brake Discs - Check" {4255}
2004/10/11
Correction to Specifications , "Service Brakes" {4251}
2004/10/25
New Final Drive Sun Gear Improves Service Life {4051, 4055}
2005/07/18
New Extended Life Brake Discs for Severe Applications Are Now Available {4251, 4255}
2005/12/12
New Final Drive Sun Gear Improves Service Life {3278, 4050}
2006/03/13
New Planetary Shafts Improve the Durability of the Final Drive {4001, 4051}
2007/10/01
The New Wheel Will Increase Face Load of Duo-cone Seal Gp {4051}
2008/10/13
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Reuse And Salvage Guidelines
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Reuse And Salvage Guidelines
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Technical Information Bulletin
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Special Instruction
Bench Test Procedure For A 980G and 980G Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure For A 980G and 980G Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure for a 980G and 980G Series 2 Wheel Loader Transmission (Heavy Duty) {3030, 3073}
Bench Test Procedure for a 980G and 980G Series 2 Wheel Loader Transmission (Heavy Duty) {3030, 3073}
Service Letter-NACD
102-4167 And 128-4111 Screens Need To Be Removed From Parts Stock
102-4167 And 128-4111 Screens Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Specifications
Transmission Hydraulic Control
980G Wheel Loader Power Train
Service Letter-China
102-4167 And 128-4111 Screens Need To Be Removed From Parts Stock
102-4167 And 128-4111 Screens Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Transmission Hydraulic Control
980G Wheel Loader Power Train
Transmission Hydraulic Control Operation
980G Wheel Loader Power Train
Service Letter-APD
102-4167 And 128-4111 Screens Need To Be Removed From Parts Stock
102-4167 And 128-4111 Screens Need To Be Removed From Parts Stock
Testing and Adjusting
Transmission Pressures - Test and Adjust
980G Wheel Loader Power Train
Bench Test Procedures
Bench Test Procedure For A 980G and 980G Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure For A 980G and 980G Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure for a 980G and 980G Series 2 Wheel Loader Transmission (Heavy Duty) {3030, 3073}
Bench Test Procedure for a 980G and 980G Series 2 Wheel Loader Transmission (Heavy Duty) {3030, 3073}
Disassembly and Assembly
Transmission Hydraulic Control Valve - Remove
980G Wheel Loader Power Train
Transmission Hydraulic Control Valve - Disassemble
980G Wheel Loader Power Train
Transmission Hydraulic Control Valve - Assemble
980G Wheel Loader Power Train
Transmission Hydraulic Control Valve - Install
980G Wheel Loader Power Train
Service Magazine
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Service Letter-NACD
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
Spherical Washer In The Differential Group May Crack And Disintegrate Causing The Differential To Fail On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Spherical Washer In The Differential Group May Crack And Disintegrate Causing The Differential To Fail On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Service Letter-Australia
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
Spherical Washer In The Differential Group May Crack And Disintegrate Causing The Differential To Fail On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Spherical Washer In The Differential Group May Crack And Disintegrate Causing The Differential To Fail On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Service Letter-CFEL
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
Spherical Washer In The Differential Group May Crack And Disintegrate Causing The Differential To Fail On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Spherical Washer In The Differential Group May Crack And Disintegrate Causing The Differential To Fail On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Service Letter-CSARL
Service Letter-Americas
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
Spherical Washer In The Differential Group May Crack And Disintegrate Causing The Differential To Fail On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Spherical Washer In The Differential Group May Crack And Disintegrate Causing The Differential To Fail On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Service Letter-Brazil
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
Specifications
Limited Slip Differential
980G Wheel Loader Power Train
Limited Slip Differential
980G Wheel Loader Power Train
NoSPIN Differential
980G Wheel Loader Power Train
Differential and Bevel Gear
980G Wheel Loader Power Train
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Service Letter-China
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
Spherical Washer In The Differential Group May Crack And Disintegrate Causing The Differential To Fail On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Spherical Washer In The Differential Group May Crack And Disintegrate Causing The Differential To Fail On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Service Letter-Asia
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
Spherical Washer In The Differential Group May Crack And Disintegrate Causing The Differential To Fail On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Spherical Washer In The Differential Group May Crack And Disintegrate Causing The Differential To Fail On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Systems Operation
Differential
980G Wheel Loader Power Train
Limited Slip Differential
980G Wheel Loader Power Train
NoSPIN Differential
980G Wheel Loader Power Train
Reuse And Salvage Guidelines
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Salvage of Differential Carriers {3258, 3284}
Salvage of Differential Carriers {3258, 3284}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
The Cap Bolts In The Differential Carrier Need To Be Checked And Tightened To The Proper Torque On Certain 824G, 825G, 826G And 980G Wheel Loaders
Spherical Washer In The Differential Group May Crack And Disintegrate Causing The Differential To Fail On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Spherical Washer In The Differential Group May Crack And Disintegrate Causing The Differential To Fail On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Testing and Adjusting
Differential and Final Drive Troubleshooting
980G Wheel Loader Power Train
Limited Slip Differential Disc End Play Check - Check
980G Wheel Loader Power Train
Differential Pinion Preload - Adjust
980G Wheel Loader Power Train
Differential Backlash and Bearings - Adjust
980G Wheel Loader Power Train
Disassembly and Assembly
NoSPIN Differential - Disassemble
980G Wheel Loader Power Train
NoSPIN Differential - Assemble
980G Wheel Loader Power Train
Differential and Bevel Gear - Remove
980G Wheel Loader Power Train
Differential and Bevel Gear - Disassemble
980G Wheel Loader Power Train
Differential and Bevel Gear - Assemble
980G Wheel Loader Power Train
Differential and Bevel Gear - Install
980G Wheel Loader Power Train
Limited Slip Differential - Disassemble
980G Wheel Loader Power Train
Limited Slip Differential - Assemble
980G Wheel Loader Power Train
Service Magazine
Disassembly And Assembly Supplement Available For Limited Slip Differentials{3263}
1997/08/04
Correction To Service Manual Module, SENR5887 {0375}
1997/12/01
Correction To Disassembly And Assembly Manual, SENR5877 {0374,3258}
1998/06/22
Correction to the Allowable Oil Viscosity on the Driveline {3258, 4011, 4051, 7581}
2001/01/22
New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
2001/01/22
Corrections to Specifications , "Differential and Bevel Gear" {3258}
2003/05/19
Correction to Disassembly and Assembly , "Differential and Bevel Gear - Assemble" {3258}
2005/12/19
Use <NOBR> 1U-9891</NOBR> Hydraulic Oil Additive to Eliminate Brake Chatter and Reduce Noise in the Limited Slip Differential {3263, 5095}
2003/10/06
Correction to Disassembly and Assembly , "Differential and Bevel Gear - Assemble" {3258}
2004/09/27
Updates to the Differential Gear Group Accommodate an Increased Payload {3258, 3263, 3265}
2005/04/25
New High Strength Bolts Are Now Used for the Spiral Bevel Gears in Order To Improve Service Life in High Load Applications {3256, 3258}
2006/12/18
Correction to Testing and Adjusting , "Differential Backlash and Bearings - Adjust" {3258}
2008/05/12
An Improved Bevel Gear Set is Now Used {3256}
2008/10/06
Special Instruction
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Salvage of Differential Carriers {3258, 3284}
Salvage of Differential Carriers {3258, 3284}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Special Instruction
Dismounting Tires on Caterpillar Machines with Five Piece Rims{4202}
Dismounting Tires on Caterpillar Machines with Five Piece Rims{4202}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Service Magazine
Improved Drive Gears Increase Torque Converter Service Life {3101,3108}
1997/11/10
New Tightening Procedure For 129-0987 Drain Assembly{3001,3002,3030,3101,3159,5056}
1998/03/16
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Operation and Maintenance Manual
Transmission Oil Level - Check
980G Wheel Loader
Transmission Oil - Change
980G Wheel Loader
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Operation and Maintenance Manual
Oil Filter - Inspect
980G Wheel Loader
Transmission Oil Filter - Replace
980G Wheel Loader
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Service Letter-NACD
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Oil Filter (Power Train)
980G Wheel Loader Power Train
Service Letter-China
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Service Letter-Asia
Systems Operation
Oil Filter (Power Train)
980G Wheel Loader Power Train
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Letter-APD
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Service Magazine
Corrections To Alert Indicator Reference In 980G Operation And Maintenance Manual {3067}
1997/04/07
Addition of Serial Numbers to An Improved Bypass Switch Is Now Used {1435}
2000/05/01
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
New Advanced Efficiency Filters Are Now Available {1408, 1435, 3004, 3067, 5068}
2010/10/01
New Advanced Efficiency Filters Are Now Available for the Transmission Assembly and the Torque Converter Assembly Used on Certain Wheel Loaders {1408, 1435, 3004, 3006, 3067, 5068}
2011/07/07
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Specifications
Speed Sensor (Transmission Output)
980G Wheel Loader Power Train
Output Transfer Gears
980G Wheel Loader Power Train
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Output Transfer Gears
980G Wheel Loader Power Train
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Salvage of Transmission Transfer Gear Case and Cover for Articulated Trucks, Compactors, Load Haul Dump, Wheel Loaders, Wheel Tractors, and Motor Graders {3075, 3159}
Salvage of Transmission Transfer Gear Case and Cover for Articulated Trucks, Compactors, Load Haul Dump, Wheel Loaders, Wheel Tractors, and Motor Graders {3075, 3159}
Testing and Adjusting
Speed Sensor - Adjust
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
Output Transfer Gears - Adjust
980G Wheel Loader Power Train
Calibration
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
Troubleshooting
MID 081 - CID 0671 - FMI 01
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
Disassembly and Assembly
Torque Converter from Transmission, Output Transfer Gears - Separate
980G Wheel Loader Power Train
Torque Converter to Transmission, Output Transfer Gears - Connect
980G Wheel Loader Power Train
Output Transfer Gears from Transmission, Torque Converter - Separate
980G Wheel Loader Power Train
Output Transfer Gears - Disassemble
980G Wheel Loader Power Train
Output Transfer Gears - Assemble
980G Wheel Loader Power Train
Output Transfer Gears to Transmission, Torque Converter - Connect
980G Wheel Loader Power Train
Parking Brake Actuator - Remove and Install
980G Wheel Loader Power Train
Parking Brake - Remove and Install
980G Wheel Loader Power Train
Engine, Torque Converter, Transmission and Output Transfer Gears - Remove
980G Wheel Loader Engine Supplement
Engine, Torque Converter, Transmission and Output Transfer Gears - Install
980G Wheel Loader Engine Supplement
Engine from Torque Converter, Transmission, Output Transfer Gears - Separate
980G Wheel Loader Engine Supplement
Engine to Torque Converter, Transmission, Output Transfer Gears - Connect
980G Wheel Loader Engine Supplement
Service Magazine
New Tightening Procedure For 129-0987 Drain Assembly{3001,3002,3030,3101,3159,5056}
1998/03/16
Replacement Covers for the Transfer Gear Cases are Available {3159}
2002/11/18
Correction to Troubleshooting , "MID 081 - CID 0671 - FMI 01" {3175}
2003/03/17
Improvement to the Seal Reduces Leaks in the Transfer Case {3159}
2004/01/26
Improved Transmission Output Bearings Are Available {3075, 3159}
2004/12/27
A New Retainer Improves the Durability of the Transmission {3063, 3075, 3159}
2005/08/08
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
2005/12/26
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Letter-NACD
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
The Internal Wall May Degrade On Hoses Used In Certain 938F, 950F Series II, 960F, 966F Series II, 970F And 980G Wheel Loaders, 815F, 816F, 824G, 825G And 826G Compactors And IT38F Toolcarriers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Service Letter-APD
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
The Transmission Drain Filter Valve May Have Been Installed Incorrectly
The Transmission Drain Filter Valve May Have Been Installed Incorrectly
8C-3446 Fluid Sampling Valve And 6V-3965 Nipple Assembly May Leak
8C-3446 Fluid Sampling Valve And 6V-3965 Nipple Assembly May Leak
Service Magazine
New Ball Valve Provides Improved Durability {1372}
1997/07/21
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Service Magazine
Disassembly And Assembly Supplement Available For Limited Slip Differentials{3263}
1997/08/04
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Service Magazine
Correct Retaining Ring Specified For Shaft Seal In Piston Motor Group For Fan Drive{5058}
1997/10/20
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Transmission Oil Pump
980G Wheel Loader Power Train
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Transmission Oil Pump
980G Wheel Loader Power Train
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Transmission Oil Pump - Remove
980G Wheel Loader Power Train
Transmission Oil Pump - Disassemble
980G Wheel Loader Power Train
Transmission Oil Pump - Assemble
980G Wheel Loader Power Train
Transmission Oil Pump - Install
980G Wheel Loader Power Train
Service Magazine
Wear that is Acceptable in Specific Gear Pumps {4007, 5073, 5073, 7516}
2008/02/04
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2009/01/26
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Operation and Maintenance Manual
Drive Shaft Spline (Center) - Lubricate
980G Wheel Loader
Drive Shaft Support Bearing - Lubricate
980G Wheel Loader
Service Letter-NACD
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Service Letter-Australia
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Service Letter-CFEL
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Service Letter-CSARL
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Service Letter-Americas
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Service Letter-Brazil
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Specifications
Drive Shaft
980G Wheel Loader Power Train
Service Letter-China
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Service Letter-Asia
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Service Letter-APD
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The Driveshaft Yoke Assembly To Prevent The Axle Input Shaft From Leaking Or Cap Coming Off On Certain 980G Wheel Loaders And 824G, 825G And 826G Compactors
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Product Support Program For Replacing The 9X8272 Bolts May Prematurely Fracture On Certain 980G Wheel Loaders
Disassembly and Assembly
Carrier Bearing (Drive Shaft) - Remove and Install
980G Wheel Loader Power Train
Drive Shaft (Front) - Remove and Install
980G Wheel Loader Power Train
Drive Shaft (Center) - Remove and Install
980G Wheel Loader Power Train
Drive Shaft (Rear) - Remove and Install
980G Wheel Loader Power Train
Service Magazine
Correction To Service Manual Module, SEBU6946-02, Operation And Maintenance Manual, 980G Wheel Loader{0374,3251}
1998/02/23
A New Addition to the Torque Procedure for the Drive Shaft Bolts {3253}
2000/02/07
Correction to the Torque Procedure for the Drive Shaft Bolts {3253}
2001/04/02
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
New Tools are Available for Removing and Installing the Bolts of the Retainer Plate for the Bearing of the Final Drive {0727, 4050}
2002/07/15
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
New Installation Sleeves for the Transmission Clutches Are Now Available {0720, 3030, 3155}
2007/07/09
Service Letter-NACD
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
Specifications
Torque Converter
980G Wheel Loader Power Train
Torque Converter and Pump Drive Housing
980G Wheel Loader Power Train
Service Letter-China
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Service Letter-Asia
Systems Operation
Torque Converter
980G Wheel Loader Power Train
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Letter-APD
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Product Support Program For Inspecting Torque Converter Housing And/Or Replacing The Implement Pump At Relatively Low Service Hours On Certain 980G Wheel Loaders
Testing and Adjusting
Torque Converter Troubleshooting
980G Wheel Loader Power Train
Torque Converter Stall - Test
980G Wheel Loader Power Train
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Torque Converter from Transmission, Output Transfer Gears - Separate
980G Wheel Loader Power Train
Torque Converter to Transmission, Output Transfer Gears - Connect
980G Wheel Loader Power Train
Engine, Torque Converter, Transmission and Output Transfer Gears - Remove
980G Wheel Loader Engine Supplement
Engine, Torque Converter, Transmission and Output Transfer Gears - Install
980G Wheel Loader Engine Supplement
Engine from Torque Converter, Transmission, Output Transfer Gears - Separate
980G Wheel Loader Engine Supplement
Engine to Torque Converter, Transmission, Output Transfer Gears - Connect
980G Wheel Loader Engine Supplement
Transmission from Torque Converter - Separate
980G Wheel Loader Power Train
Transmission to Torque Converter - Connect
980G Wheel Loader Power Train
Torque Converter - Disassemble - Heavy Duty
980G Wheel Loader Power Train
Torque Converter - Assemble - Heavy duty
980G Wheel Loader Power Train
Service Magazine
New Vane Pump Group, Assures Clearance For Drive Gear, And Correct Alignment Of Vane Pump Group With Torque Converter Cover{5055}
1997/10/27
Improved Drive Gears Increase Torque Converter Service Life {3101,3108}
1997/11/10
New Tightening Procedure For 129-0987 Drain Assembly{3001,3002,3030,3101,3159,5056}
1998/03/16
Correction To Systems Operation Testing And Adjusting Manual, SENR5883-02 {0374,3101,5055}
1998/11/23
New Tube Assemblies Used In Torque Converter Lines Group {3101}
1999/07/05
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
2005/12/26
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2015/09/28
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2015/09/28
Operation and Maintenance Manual
Transmission Oil Level - Check
980G Wheel Loader
Transmission Oil - Change
980G Wheel Loader
Special Instruction
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Bench Test Procedure For A 980G and 980G Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure For A 980G and 980G Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure for a 980G and 980G Series 2 Wheel Loader Transmission (Heavy Duty) {3030, 3073}
Bench Test Procedure for a 980G and 980G Series 2 Wheel Loader Transmission (Heavy Duty) {3030, 3073}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Installation Procedure for the <NOBR>5P-6261</NOBR> Retaining Rings on ELRT Control Valves {3083, 3157}
Installation Procedure for the 5P-6261 Retaining Rings on ELRT Control Valves {3083, 3157}
Service Letter-NACD
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
Service Letter-Australia
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
Service Letter-CFEL
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
Service Letter-CSARL
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
Service Letter-Americas
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
Technical Information Bulletin
Clutch Failures And Inadequate Lubrication Of Planetary Group Parts
Clutch Failures And Inadequate Lubrication Of Planetary Group Parts
Transmission May Neutralize While Operating The Transmission Directional Switch
Transmission May Neutralize While Operating The Transmission Directional Switch
Discs May Fail in 980 and 988 Transmissions
Discs May Fail in 980 and 988 Transmissions
A Quality Problem Is Identified on Friction Disc on Certain Caterpillar Products{3160}
A Quality Problem Is Identified on Friction Disc on Certain Caterpillar Products{3160}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
Specifications
Transmission Planetary
980G Wheel Loader Power Train
Output Transfer Gears
980G Wheel Loader Power Train
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Letter-China
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
Service Letter-Asia
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
Systems Operation
Output Transfer Gears
980G Wheel Loader Power Train
Transmission Planetary
980G Wheel Loader Power Train
Transmission Hydraulic System
980G Wheel Loader Power Train
Transmission Lubrication - <B>6P-3761</B> Transmission Planetary
980G Wheel Loader Power Train
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Caterpillar Wheel Loader and Wheel Dozer Technician Checklist Transmission Removal and Installation {0372, 0374, 3030, 3030}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Service Letter-APD
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
Product Support Program For Installing A New Transmission Filter Drain And Oil Fill Tube On Certain 980G Wheel Loaders, 824G, 825G And 826G Compactors
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
New Clutch Discs Need To Be Installed In The Transmission 1st Speed Clutch Of Certain 980G Loaders
Testing and Adjusting
Transmission Troubleshooting
980G Wheel Loader Power Train
Transmission Pressures - Test and Adjust
980G Wheel Loader Power Train
Bench Test Procedures
Bench Test Procedure For A 980G and 980G Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure For A 980G and 980G Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure for a 980G and 980G Series 2 Wheel Loader Transmission (Heavy Duty) {3030, 3073}
Bench Test Procedure for a 980G and 980G Series 2 Wheel Loader Transmission (Heavy Duty) {3030, 3073}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Torque Converter from Transmission, Output Transfer Gears - Separate
980G Wheel Loader Power Train
Torque Converter to Transmission, Output Transfer Gears - Connect
980G Wheel Loader Power Train
Output Transfer Gears from Transmission, Torque Converter - Separate
980G Wheel Loader Power Train
Output Transfer Gears - Disassemble
980G Wheel Loader Power Train
Output Transfer Gears - Assemble
980G Wheel Loader Power Train
Transmission Planetary - Disassemble
980G Wheel Loader Power Train
Transmission Planetary - Assemble
980G Wheel Loader Power Train
Output Transfer Gears to Transmission, Torque Converter - Connect
980G Wheel Loader Power Train
Engine, Torque Converter, Transmission and Output Transfer Gears - Remove
980G Wheel Loader Engine Supplement
Engine, Torque Converter, Transmission and Output Transfer Gears - Install
980G Wheel Loader Engine Supplement
Engine from Torque Converter, Transmission, Output Transfer Gears - Separate
980G Wheel Loader Engine Supplement
Engine to Torque Converter, Transmission, Output Transfer Gears - Connect
980G Wheel Loader Engine Supplement
Transmission from Torque Converter - Separate
980G Wheel Loader Power Train
Transmission to Torque Converter - Connect
980G Wheel Loader Power Train
Transmission Planetary - Disassemble
980G Wheel Loader Power Train
Transmission Planetary - Assemble
980G Wheel Loader Power Train
Transmission Planetary - Disassemble - Standard
980G Wheel Loader Power Train
Transmission Planetary - Assemble - Standard
980G Wheel Loader Power Train
Service Magazine
Correction To The Control Replacement Procedure In Service Manual Module, SENR5890, Electronic Transmission Control System {3168}
1997/04/07
Corrections To Power Train Service Manual Modules {3030}
1997/07/21
Supplement To Service Manual, SENR5890, Electronic Transmission Control System{1408,3168}
1997/08/11
Transmission Control Switches Serviceable{3171}
1997/09/22
Revised Testing And Adjusting Service Manual For The 980G Wheel Loader Power Shift Transmission Available {0374,0375}
1997/11/17
New Transmission Oil Cooler Improves Heat Transfer Performance{1307,1375,3103}
1997/12/08
Serviceable Transmission Control Switches And New Improved Retention Bolts Are Available For The 123-7406 And 132-3110 Steering Wheel Groups{3171}
1997/12/08
Revised Systems Operation Testing And Adjusting Manual, SENR5890-02, Transmission Electronic Control System, Now Available {0375,3168}
1997/12/22
New Tightening Procedure For 129-0987 Drain Assembly{3001,3002,3030,3101,3159,5056}
1998/03/16
New Transmission Control Group and Flash Software Available, Featuring Improved Downshifting{3168}
1998/07/20
New Transmission Control Group And Flash Software Available, Featuring Improved Downshifting {3168}
1998/08/24
New Transmission Control Group And Flash Software Available, Featuring Improved Downshifting {3168}
1998/09/28
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Actuator For Transmission Switch Can Be Service Replaced {7332}
1999/06/28
Transmission Maximum Gear is Programmable with Electronic Technician {3168,7610}
1999/07/05
Clutch Plates Should be Inspected and the Clutch Plates Should be Circumferentially Ground {3190}
2002/04/29
The Assembly Procedure of the Carrier for the Transmission Planetary has Changed {3160, 3186}
2002/11/25
Transmission Lubrication Has Been Improved {3030}
2003/10/27
New Carriers and New Thrust Washers Improve the Durability of the Transmission {3030}
2005/12/05
A New Retainer Improves the Durability of the Transmission {3063, 3075, 3159}
2005/08/08
Steel Ecology Drains Are Now Used {3030, 3064, 3075, 3101, 3105}
2005/12/26
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
New Installation Sleeves for the Transmission Clutches Are Now Available {0720, 3030, 3155}
2007/07/09
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
A New Spring Is Now Used in Clutch 5 of the Transmission on Certain Landfill Compactors, Soil Compactors, Load Haul Dumps, Underground Articulated Trucks, Wheel Dozers, and Wheel Loaders {3030, 3160}
2012/10/25
Cat&reg; Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
Cat® Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
Special Instruction
Installation Procedure for the <NOBR>5P-6261</NOBR> Retaining Rings on ELRT Control Valves {3083, 3157}
Installation Procedure for the 5P-6261 Retaining Rings on ELRT Control Valves {3083, 3157}
Service Magazine
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Special Instruction
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Specifications
Relief Valve (Torque Converter Outlet)
980G Wheel Loader Power Train
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Disassembly and Assembly
Relief Valve (Torque Converter Outlet) - Remove
980G Wheel Loader Power Train
Relief Valve (Torque Converter Outlet) - Disassemble
980G Wheel Loader Power Train
Relief Valve (Torque Converter Outlet) - Assemble
980G Wheel Loader Power Train
Relief Valve (Torque Converter Outlet) - Install
980G Wheel Loader Power Train
Service Magazine
Special Instruction, REHS0209, &quot;Installation Of Selector And Pressure Control Valve&quot; Available {0374,4349}
1998/05/25
An Improved Retaining Ring Is Now Available for Machines Equipped with ELRT Transmission Control Valves {3083, 3157}
2013/10/10
Specifications
Selector and Pressure Control Valve (Transmission)
980G Wheel Loader Power Train
Service Magazine
Special Instruction, REHS0209, &quot;Installation Of Selector And Pressure Control Valve&quot; Available {0374,4349}
1998/05/25
An Improved Retaining Ring Is Now Available for Machines Equipped with ELRT Transmission Control Valves {3083, 3157}
2013/10/10
Technical Information Bulletin
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Specifications
Solenoid Valve (Clutch)
980G Wheel Loader Power Train
Systems Operation
Solenoid Valves
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
Testing and Adjusting
Calibration
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
Troubleshooting
MID 081 - CID 0631 - FMI 03
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0632 - FMI 03
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0633 - FMI 03
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0634 - FMI 03
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0635 - FMI 03
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0636 - FMI 03
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0631 - FMI 05
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0632 - FMI 05
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0633 - FMI 05
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0634 - FMI 05
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0635 - FMI 05
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0636 - FMI 05
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0631 - FMI 06
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0632 - FMI 06
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0633 - FMI 06
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0634 - FMI 06
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0635 - FMI 06
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
MID 081 - CID 0636 - FMI 06
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
Service Magazine
New Solenoid Valve Eliminates Need For Orifices In Pilot Lines For Some Wheel Loaders {5059,5479}
1998/08/31
Improved Solenoid Valve Group Available {5479}
1999/01/25
A New Coil Assembly is Now Used {5479}
2011/05/04
White Color Teflon Insulation is Now Used in (24V) Coil Wire Leads {1554, 3174, 445L, 4804, 4805, 5479, 7556}
2011/03/02
Special Instruction
Bench Test Procedure For A 980G and 980G Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure For A 980G and 980G Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure for a 980G and 980G Series 2 Wheel Loader Transmission (Heavy Duty) {3030, 3073}
Bench Test Procedure for a 980G and 980G Series 2 Wheel Loader Transmission (Heavy Duty) {3030, 3073}
Service Letter-NACD
102-4167 And 128-4111 Screens Need To Be Removed From Parts Stock
102-4167 And 128-4111 Screens Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Specifications
Solenoid Valve (Clutch)
980G Wheel Loader Power Train
Selector and Pressure Control Valve (Transmission)
980G Wheel Loader Power Train
Transmission Hydraulic Control
980G Wheel Loader Power Train
Service Letter-China
102-4167 And 128-4111 Screens Need To Be Removed From Parts Stock
102-4167 And 128-4111 Screens Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Solenoid Valves
826G Landfill Compactor, 825G Soil Compactor, 824G Wheel Dozer and 980G Wheel Loader Power Train Electronic Control System
Transmission Hydraulic Control
980G Wheel Loader Power Train
Transmission Hydraulic Control Operation
980G Wheel Loader Power Train
Service Letter-APD
102-4167 And 128-4111 Screens Need To Be Removed From Parts Stock
102-4167 And 128-4111 Screens Need To Be Removed From Parts Stock
Testing and Adjusting
Transmission Pressures - Test and Adjust
980G Wheel Loader Power Train
Bench Test Procedures
Bench Test Procedure For A 980G and 980G Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure For A 980G and 980G Series 2 Wheel Loader Transmission{3030, 3073}
Bench Test Procedure for a 980G and 980G Series 2 Wheel Loader Transmission (Heavy Duty) {3030, 3073}
Bench Test Procedure for a 980G and 980G Series 2 Wheel Loader Transmission (Heavy Duty) {3030, 3073}
Disassembly and Assembly
Transmission Hydraulic Control Valve - Remove
980G Wheel Loader Power Train
Transmission Hydraulic Control Valve - Disassemble
980G Wheel Loader Power Train
Transmission Hydraulic Control Valve - Assemble
980G Wheel Loader Power Train
Transmission Hydraulic Control Valve - Install
980G Wheel Loader Power Train
Service Magazine
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
New Final Drive Sun Gear Improves Service Life {4051, 4055}
2005/07/18
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Operation and Maintenance Manual
Tire Inflation Pressure Adjustment
980G Wheel Loader
Tire Inflation with Nitrogen
980G Wheel Loader
Tire Inflation - Check
980G Wheel Loader
Tire Inflation Pressure
980G Wheel Loader
Special Instruction
Dismounting Tires on Caterpillar Machines with Five Piece Rims{4202}
Dismounting Tires on Caterpillar Machines with Five Piece Rims{4202}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Specifications
Rim Group
980G Wheel Loader Power Train
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Disassembly and Assembly
Tire and Rim (Front) - Remove and Install
980G Wheel Loader Power Train
Tire and Rim (Rear) - Remove and Install
980G Wheel Loader Power Train
Service Magazine
Serviceable Transmission Control Switches And New Improved Retention Bolts Are Available For The 123-7406 And 132-3110 Steering Wheel Groups{3171}
1997/12/08
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Special Instruction
Installation of 2Q-8471 Axle Oil Cooler Kit {1365}
Installation of 2Q-8471 Axle Oil Cooler Kit {1365}
Disassembly and Assembly
Transmission Oil Cooler - Remove and Install
980G Wheel Loader Engine Supplement
Service Magazine
New Transmission Oil Cooler Improves Heat Transfer Performance{1307,1375,3103}
1997/12/08
New Magnetic Filter for Axle Oil Cooler Lines {1365, 3004}
2004/11/01
A New Hose Is Now Used on The Transmission Cooler Line on Some Medium Wheel Loaders {1375, 3016}
2008/09/29
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
128-4775 Lifting Bracket Assembly{0599, 0632, 0727, 1122, 4050}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
New Final Drive Sun Gear Improves Service Life {4051, 4055}
2005/07/18
New Final Drive Sun Gear Improves Service Life {3278, 4050}
2006/03/13
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
New Tightening Procedure For 129-0987 Drain Assembly{3001,3002,3030,3101,3159,5056}
1998/03/16

Truck sale:

Caterpillar 980G
 
Caterpillar 980G
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
 
78,208 
Caterpillar 980G, Wheel Loaders, Construction


 
69,976 
Caterpillar 980G, Wheel Loaders, Construction


Caterpillar 980G
 
Caterpillar 980G
- Wheel Loaders
ZIEGLER CAT
 
368,500 
Caterpillar 980G, Wheel Loaders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.