AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

205-2978 LIGHTING GP-FLOOD -CUSTOM S/N 9CM1-UP PART OF 147-7261 MACHINE AR 980G WHEEL LOADER


ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
SOLENOID GP-SHUTOFF
STARTING MOTOR GP
SWITCH GP
WIRING GP

WHEEL LOADER 980G WHEEL LOADER 9CM
 4Q-1795 Conversion Ar-Underground Mine Custom Product Support Literature for 980G Wheel Loader 9CM00001-UP (MACHINE) SEBC1280 980G 9CM   (1996)

ELECTRICAL AND STARTING SYSTEM

LIGHTING GP
LAMP GP-DOME
3E-6389 LAMP GP-DOME
LAMP GP-FLOOD
9X-1439 LAMP GP-FLOOD
LAMP GP-FLOOD
9X-4381 LAMP GP-FLOOD
LAMP GP-FLOOD
172-9973 LAMP GP-FLOOD
LAMP GP-SIGNAL
3E-6466 LAMP GP-SIGNAL
LAMP GP-SIGNAL
135-0426 LAMP GP-SIGNAL
LAMP GP-SIGNAL
162-2073 LAMP GP-SIGNAL
LIGHTING GP-FLOOD
185-9889 LIGHTING GP-FLOOD
205-2978 LIGHTING GP-FLOOD
LIGHTING GP-SIGNAL
176-1698 LIGHTING GP-SIGNAL
 

#SEBC12800090
 

205-2978: LIGHTING GP-FLOOD

205-2978 LIGHTING GP-FLOOD -CUSTOM
S/N 9CM1-UP
PART OF 147-7261 MACHINE AR
i01599346 SEBC1280
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5C-9553 M [8] BOLT (M6X1X16MM)  
  8T-4136 M [4] BOLT (M10X1.5X25MM)  
  8T-4189 M [18] BOLT (M8X1.25X20MM)  
  8T-4195 M [8] BOLT (M10X1.5X30MM)  
  130-5300 [2] CLIP  
  174-5907 [2] CLIP  
  8R-7911 [2] COVER AS  
    (EACH INCLUDES)
  8C-8778 M [2] STUD-WELD (M8X1.25X25MM OAL)  
  8R-7912 [1] PLATE  
  146-7720 [1] COVER AS  
  8T-3612 M [4] NUT-WELD (M8X1.25 THD)  
  147-7904 [1] COVER AS  
  8T-3612 M [4] NUT-WELD (M8X1.25 THD)  
  147-8462 [2] COVER AS  
  2D-1290 [4] GROMMET  
  5P-7648 [6] GROMMET  
  9D-3769 [2] GROMMET  
  176-1347 [1] HARNESS AS-LIGHTING (RH-FRONT)  
  102-8802 [1] KIT-RECEPTACLE (2 PIN)  
    (INCLUDES RECEPTACLE AS AND WEDGE)
  155-2270 [3] KIT-REPAIR (2 PIN PLUG)  
  155-2274 [1] KIT-CONNECTING PLUG (6 PIN)  
    (EACH KIT INCLUDES PLUG AS AND WEDGE)
  176-1348 [1] HARNESS AS-LIGHTING (LH-FRONT)  
  102-8802 [1] KIT-RECEPTACLE (2 PIN)  
  102-8805 [1] KIT-RECEPTACLE (6 PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS AND WEDGE)
  186-3735 [4] PIN-CONNECTOR  
  155-2270 [3] KIT-REPAIR (2 PIN PLUG)  
    (EACH KIT INCLUDES PLUG AS AND WEDGE)
  180-3412 [1] HARNESS AS-LIGHTING (RH-REAR)  
  102-8802 [1] KIT-RECEPTACLE (2 PIN)  
    (INCLUDES RECEPTACLE AS AND WEDGE)
  155-2265 [1] KIT-CONNECTING PLUG (8 PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3 PIN)  
  155-2270 [2] KIT-REPAIR (2 PIN PLUG)  
    (EACH KIT INCLUDES PLUG AS AND WEDGE)
  180-3413 [1] HARNESS AS-LIGHTING (LH-REAR)  
  102-8802 [1] KIT-RECEPTACLE (2 PIN)  
  102-8806 [1] KIT-RECEPTACLE (8 PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS AND WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3 PIN)  
  155-2270 [2] KIT-REPAIR (2 PIN PLUG)  
    (EACH KIT INCLUDES PLUG AS AND WEDGE)
  8R-7909 [2] HOUSING AS  
    (EACH INCLUDES)
  6V-9632 M [4] NUT-WELD (M6X1 THD)  
  172-9973 Y [4] LAMP GP-FLOOD  
  135-0426 Y [2] LAMP GP-SIGNAL  
  5C-2890 M [6] NUT (M6X1 THD)  
  5C-7261 M [4] NUT (M8X1.25 THD)  
  8T-4133 M [4] NUT (M10X1.5 THD)  
  148-0187 [2] PLATE  
  133-3561 [2] SHEET  
  9X-8256 [14] WASHER (6.6X12X2MM THK)  
  8T-4121 [16] WASHER-HARD (11X21X2.5MM THK)  
  8T-4224 [22] WASHER-HARD (8.8X16X2MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC12800091
 

176-1698: LIGHTING GP-SIGNAL

176-1698 LIGHTING GP-SIGNAL
S/N 9CM1-UP
PART OF 147-7261 MACHINE AR
i01256241 SEBC1280
1761698 LIGHTING GP-SIGNAL Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6466 Y [2] LAMP GP-SIGNAL (FRONT TURN)  
2. 162-2073 Y [2] LAMP GP-SIGNAL (REAR TURN)  
3. 5C-2890 M [12] NUT (M6X1 THD)  
4. 9X-8256 [12] WASHER (6.6X12X2MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC12800092
 

1W-0141: SOLENOID GP-SHUTOFF

1W-0141 SOLENOID GP-SHUTOFF
S/N 41Z1-UP
PART OF 9Q-3733 ENGINE AR
i00188629 SEBC1280
1W0141 SOLENOID GP-SHUTOFF Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-6465 C [1] SOLENOID  
2. 7B-2742 [2] BOLT (1/4X1.25IN)  
  5G-2003 [2] SPACER  
3. 6I-2002 [1] GASKET  
  9S-3263 AB COMPOUND-THREAD LOCK  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBC12800093
 

124-9780: STARTING MOTOR GP-PRELUB SYS

124-9780 STARTING MOTOR GP-PRELUB SYS
S/N 9CM1-UP
PART OF 185-9898 PRELUBRICATION AR-ENGINE
i01608393 SEBC1280
1249780 STARTING MOTOR GP-PRELUB SYS Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094 IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437 THD)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13MM)(#8)  
6. 4L-7124 [4] BOLT (1/4-20X1.25 IN)  
7. 117-0610 [1] KIT-BEARING  
8. 3T-9525 [1] PLATE AS-BRUSH  
  5P-6298 [12] SCREW-MACHINE (10-32X0.5 IN)  
  6T-0363 [6] HOLDER AS-BRUSH  
    (EACH INCLUDES)
  3T-9494 [1] SPRING  
  6T-0371 [1] INSULATOR  
  7F-3525 [6] WASHER-BUSHING  
  9F-5599 [12] LOCKWASHER  
9. 7F-3491 [2] WASHER (0.516X1X0.094 IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88 IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5 IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 4M-1829 [1] BOOT-RUBBER  
19. 9M-7606 [1] PLUNGER AS  
20. 9M-7609 [1] SPRING  
21. 4M-1827 [1] RETAINER-SPRING  
22. 8C-3089 [1] SEAL-O-RING  
23. 4M-1853 [1] LEVER AS-SHIFT  
24. 5M-3034 [1] LOCKNUT  
25. 7L-2894 [4] GASKET  
26. 4M-1831 [4] PLUG-LEVER HOUSING  
27. 4M-1854 [1] SHAFT-LEVER  
28. 1H-1023 [1] SEAL-O-RING  
29. 2D-6392 [1] SEAL-O-RING  
30. 7T-3974 [1] HOUSING AS-DRIVE  
31. 6N-3826 [1] DRIVE AS-MOTOR  
32. 2H-3429 [2] RING-RETAINING  
33. 6V-1322 [4] BOLT (1/4-20X0.375 IN)  
34. 8T-4205 [4] WASHER-HARD (7.2X14.5X2MM THK)  
35. 6N-3279 [1] INSULATOR  
36. 036-9823 [13] BOLT  
37. 111-9862 [1] COVER-STARTING MOTOR  
38. 1H-2629 [3] STRIP-INSULATION  
39. 7M-0324 [1] COIL AS-FIELD  
40. 3F-0379 [12] SCREW-POLE SHOE  
41. 7F-3488 [6] SHOE-POLE  
42. 111-9864 [1] GASKET  
43. 7M-0325 [1] INSULATOR-COIL  
44. 3T-9524 [6] BRUSH AS  
45. 3N-3763 [1] KIT-TERMINAL  
46. 125-6537 [1] INSULATOR  
47. 3R-8801 [1] CLAMP  
48. 8F-1434 [2] LOCKWASHER  
49. 6V-8188 [6] NUT (1/2-13 THD)  
50. 7X-0562 [6] WASHER-HARD (13.5X19X0.8MM THK)  
51. 4B-2049 [6] NUT (10-32 THD)  
52. 8T-0328 [10] WASHER-HARD (5.5X10X1MM THK)  
53. 3T-9494 [6] SPRING  
54. 123-9776 [1] ARMATURE AS-STARTING MOTOR  
55. 123-9773 [1] HOUSING AS-STARTING MOTOR  
56. 3T-3424 [2] PLUG-FELT  
57. 3T-3423 [2] CUP  
58. 1M-9968 [1] BUSHING  
59. 2F-6678 [1] SEAL-LIP  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75 IN)  
62. 6V-8373 [3] SCREW-MACHINE (6-32X0.187 IN)  
63. 9G-6770 [1] CONTACT AS  
64. 6T-1120 [1] BUSHING-TERMINAL  
65. 4M-1815 [1] SPRING-CONTACT  
66. 125-6535 [1] COVER-STARTING MOTOR  
67. 7T-9123 [1] GASKET-PLATE  
68. 125-6533 [1] SOLENOID AS  
  3R-8801 [1] CLAMP  
69. 125-6536 [1] TERMINAL AS  
 

#SEBC12800094
 

205-3950: SWITCH GP-ROADING

205-3950 SWITCH GP-ROADING -CUSTOM
S/N 9CM1-UP
PART OF 185-9897 CANOPY AR-OPEN ROPS
i01601947 SEBC1280
2053950 SWITCH GP-ROADING Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-1855 [1] SWITCH AS-DIMMER  
  6V-8362 [3] SCREW-MACHINE (8-32X0.31 IN)  
  9B-7233 [3] LOCKWASHER  
2. 5S-7349 [2] BOLT (1/4-20X0.5 IN)  
3. 8T-4205 [2] WASHER-HARD (7.2X14.5X2MM THK)  
4. 121-8039 [1] WIRE AS  
  187-0788 F [2] BOLT  
  187-0789 F [2] WASHER  
  206-6304 F [1] BRACKET  
  F   NOT SHOWN
 

#SEBC12800095
 

205-3919: SWITCH GP-SIGNAL

205-3919 SWITCH GP-SIGNAL -CUSTOM
S/N 9CM1-UP
PART OF 185-9897 CANOPY AR-OPEN ROPS
i01601941 SEBC1280
2053919 SWITCH GP-SIGNAL Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-0358 [1] FLASHER AS-ELECTRONIC  
2. 112-6167 [1] SWITCH AS-ROCKER (HAZARD FLASHER)  
  3E-8771 [1] SWITCH AS  
  3E-8825 [1] LAMP (24 VOLT)  
  112-6166 [1] ACTUATOR-ROCKER  
3. 3E-5239 [2] RELAY AS (24 VOLT)(TURN SIGNALS)  
4. 6V-8225 M [2] NUT (M6X1 THD)  
5. 8T-4970 M [2] BOLT (M6X1X14MM)  
6. 131-4795 [1] HARNESS AS-LIGHTING (TURN SIGNAL)  
  155-2274 [1] KIT-CONNECTING PLUG (6 PIN)  
    (INCLUDES PLUG AS AND WEDGE)
  8L-8413 [5] STRAP-CABLE  
  9X-1054 [2] PLUG AS-CONNECTOR (4 PIN)  
7. 131-7220 [1] PLATE AS  
8. 8T-4205 [4] WASHER-HARD (7.2X14.5X2MM THK)  
  M   METRIC PART
 

#SEBC12800096
 

9G-7641: SWITCH GP-START

9G-7641 SWITCH GP-START
S/N 9CM1-UP
PART OF 185-9894 PANEL GP-INSTRUMENT
i00188049 SEBC1280
9G7641 SWITCH GP-START Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8362 [4] SCREW-MACHINE (8-32X.31 IN)  
2. 9B-7233 [4] LOCKWASHER (NO.8)  
3. 7T-6799 [1] NUT-MOUNTING  
 

#SEBC12800097
 

145-9994: SWITCH GP-TRANSMISSION

145-9994 SWITCH GP-TRANSMISSION
S/N 9CM1-UP
PART OF 173-5784 KIT-CAB, 132-3110 STEERING WHEEL GP
i01064326 SEBC1280
1459994 SWITCH GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-8668 [1] SWITCH AS-PUSH BUTTON (TRANSMISSION UPSHIFT)  
  3K-0835 [1] NUT (5/8-24 THD)  
  6F-0253 [1] LOCKWASHER  
  8T-8729 [2] PIN-CONNECTOR  
2. 145-8669 [1] SWITCH AS-PUSH BUTTON (TRANSMISSION DOWNSHIFT)  
  3K-0835 [1] NUT (5/8-24 THD)  
  6F-0253 [1] LOCKWASHER  
  8T-8729 [2] PIN-CONNECTOR  
3. 177-2373 [1] SWITCH AS-ROCKER (TRANSMISSION DIRECTION)  
  5S-4246 [2] LOCKWASHER  
  096-5962 [2] WASHER-HARD (3.4X7X0.8MM THK)  
  8T-8729 [3] PIN-CONNECTOR  
  9X-8917 [2] SCREW-MACHINE  
4. 146-0209 [1] HOUSING  
 

#SEBC12800098
 

185-9892: WIRING GP-CAB

185-9892 WIRING GP-CAB -CUSTOM
S/N 9CM1-UP
PART OF 185-9897 CANOPY AR-OPEN ROPS
i01601934 SEBC1280
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4138 M [12] BOLT (M6X1X20MM)  
  099-3649 M [4] BOLT (M8X1.25X40MM)  
  4P-7429 [1] CLIP  
  4P-8134 [2] CLIP  
  172-9389 Y [1] CONTROL GP-UNPROGRAMMED  
  122-9854 [1] GASKET  
  123-2896 [1] GASKET  
  123-4627 [1] GASKET  
  2S-1647 [1] GROMMET  
  185-2630 [1] HARNESS AS-CAB (MAIN)  
  102-8803 [1] KIT-RECEPTACLE (3 PIN)  
  102-8804 [3] KIT-RECEPTACLE (4 PIN)  
  102-8805 [2] KIT-RECEPTACLE (6 PIN)  
  102-8806 [1] KIT-RECEPTACLE (8 PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS AND WEDGE)
  110-6846 [1] PLUG AS-CONNECTOR (40 PIN)  
  110-6844 [1] SEAL  
  8L-8413 [50] STRAP-CABLE  
  8N-1513 [1] RECEPTACLE AS  
  8N-1522 [1] NUT (2 1/4-16 THD)  
  8N-1519 [1] RECEPTACLE AS  
  8N-1522 [1] NUT (2 1/4-16 THD)  
  8N-1521 [2] BELL AS-END  
  8N-1530 [1] RECEPTACLE AS (12 PIN)  
  8N-1536 [1] NUT (1 5/8-18 THD)  
  8N-1534 [1] RECEPTACLE AS (20 PIN)  
  8N-1536 [1] NUT (1 5/8-18 THD)  
  8N-1535 [2] BELL AS-END  
  8T-8737 [83] PLUG-SEAL  
  9X-0141 [1] PLUG AS-CONNECTOR (40 PIN)  
  9X-1339 [1] RECEPTACLE AS (40 PIN)  
  9X-7146 [1] PLUG AS-CONNECTOR (24 PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3 PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4 PIN)  
    (EACH KIT INCLUDES PLUG AS AND WEDGE)
  169-8672 [3] PLUG AS-CONNECTOR  
  185-2101 [1] HARNESS AS-CONTROL (PILOT CONTROL CONSOLE)  
  8L-8413 [6] STRAP-CABLE  
  155-2271 [1] KIT-CONNECTING PLUG (4 PIN)  
    (INCLUDES PLUG AS AND WEDGE)
  185-2580 [1] HARNESS AS-LIGHTING (CAB FLOOD LIGHTS)  
  8T-8737 [2] PLUG-SEAL  
  155-2271 [1] KIT-CONNECTING PLUG (4 PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3 PIN)  
    (EACH KIT INCLUDES PLUG AS AND WEDGE)
  8T-9655 [8] MOUNT (ISOLATION)  
  8T-4244 M [1] NUT (M12X1.75 THD)  
  122-4429 [1] PLATE  
  123-2895 [1] PLATE  
  123-4628 [2] PLATE  
  6I-1418 [4] SPACER (8.2X12.7X28.7MM THK)  
  6Y-6584 [1] STRAP AS-GROUND  
  3S-2093 [15] STRAP-CABLE  
  7K-1181 [15] STRAP-CABLE  
  8T-4205 [12] WASHER-HARD (7.2X14.5X2MM THK)  
  8T-4223 [1] WASHER-HARD (13.5X25.5X3MM THK)  
  9N-0869 [4] WASHER-HARD (8.8X25.5X2MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC12800099
 

186-3102: WIRING GP-FRONT

186-3102 WIRING GP-FRONT -CUSTOM
S/N 9CM1-UP
PART OF 147-7261 MACHINE AR
i01599312 SEBC1280
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4137 M [20] BOLT (M10X1.5X20MM)  
  9X-2480 M [4] BOLT (M6X1.0X45MM)  
  4V-1939 [4] CLAMP  
  4D-7794 [5] CLIP  
  4K-8864 [11] CLIP  
  6D-4246 [6] CLIP  
  9X-8402 [1] CLIP  
  130-5300 [3] CLIP  
  3T-3045 [1] CLIP AS  
  185-1734 [1] HARNESS AS-FRONT CHASSIS  
  102-8802 [2] KIT-RECEPTACLE (2 PIN)  
  102-8803 [1] KIT-RECEPTACLE (3 PIN)  
  102-8805 [1] KIT-RECEPTACLE (6 PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS AND WEDGE)
  3S-2093 [2] STRAP-CABLE  
  8T-8737 [26] PLUG-SEAL  
  9X-0141 [1] PLUG AS-CONNECTOR (40 PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8557 M [1] BOLT (M5X0.8X39.37MM)  
  9X-3490 [2] SEAL-CONNECTOR  
  155-2260 [1] KIT-CONNECTING PLUG (3 PIN)  
  155-2270 [2] KIT-REPAIR (2 PIN PLUG)  
  155-2274 [1] KIT-CONNECTING PLUG (6 PIN)  
    (EACH KIT INCLUDES PLUG AS AND WEDGE)
  115-5697 [1] HARNESS AS-WORK TOOL  
  155-2260 [1] KIT-CONNECTING PLUG (3 PIN)  
    (INCLUDES PLUG AS AND WEDGE)
  5V-6439 [2] PLATE  
  3S-2093 [3] STRAP-CABLE  
  5P-5148 [2] STRAP-TIE  
  9X-8256 [4] WASHER (6.6X12X2MM THK)  
  8T-4121 [20] WASHER-HARD (11X21X2.5MM THK)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 980G :

LIGHTING GP-FLOOD
185-9889 LIGHTING GP-FLOOD
LAMP GP-SIGNAL
162-2073 LAMP GP-SIGNAL
LAMP GP-SIGNAL
135-0426 LAMP GP-SIGNAL
LAMP GP-SIGNAL
3E-6466 LAMP GP-SIGNAL
LAMP GP-FLOOD
172-9973 LAMP GP-FLOOD
LAMP GP-FLOOD
9X-4381 LAMP GP-FLOOD
LAMP GP-FLOOD
9X-1439 LAMP GP-FLOOD
LAMP GP-DOME
3E-6389 LAMP GP-DOME
LIGHTING GP-SIGNAL
176-1698 LIGHTING GP-SIGNAL
SOLENOID GP-SHUTOFF
1W-0141 SOLENOID GP-SHUTOFF
STARTING MOTOR GP-PRELUB SYS
124-9780 STARTING MOTOR GP-PRELUB SYS
SWITCH GP-ROADING
205-3950 SWITCH GP-ROADING
SWITCH GP-SIGNAL
205-3919 SWITCH GP-SIGNAL
SWITCH GP-START
9G-7641 SWITCH GP-START
SWITCH GP-TRANSMISSION
145-9994 SWITCH GP-TRANSMISSION
185-9892 WIRING GP-CAB

Truck sale:

Caterpillar 980G
 
Caterpillar 980G
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
 
78,208 
Caterpillar 980G, Wheel Loaders, Construction


 
69,976 
Caterpillar 980G, Wheel Loaders, Construction


Caterpillar 980G
 
Caterpillar 980G
- Wheel Loaders
ZIEGLER CAT
 
368,500 
Caterpillar 980G, Wheel Loaders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.