AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

176-6235 Protection Ar-Corrosion Custom Product Support Literature for 966G and 972G Wheel Loaders 1EW00001-UP (MACHINE) OPERATOR STATION Caterpillar SIS



WHEEL LOADER 972G WHEEL LOADER 1EW
 176-6235 Protection Ar-Corrosion Custom Product Support Literature for 966G and 972G Wheel Loaders 1EW00001-UP (MACHINE) SEBC1295 972G 1EW   (1997)

Parts group 972G:

  For full view, you need register
OPERATOR STATION
AIR CONDITIONER GP
4Q-1786 AIR CONDITIONER GP
4Q-1786 AIR CONDITIONER GP -CUSTOM
162-2427 AIR CONDITIONER GP
162-2427 AIR CONDITIONER GP -CUSTOM
PART OF 4Q-1786 AIR CONDITIONER GP

Information:

(For parts list, see above)

Operation and Maintenance Manual
Heating and Air Conditioning Control
966G and 972G Wheel Loaders
Belts - Inspect/Adjust/Replace
966G and 972G Wheel Loaders
In-Line Refrigerant Dryer - Replace
966G and 972G Wheel Loaders
Special Instruction
Installation Instructions for the Air Conditioner Conversion Arrangements for 950G, 962G, 966G, 972G Wheel Loaders, and IT62G Integrated Toolcarrier
Installation Instructions for the Air Conditioner Conversion Arrangements for 950G, 962G, 966G, 972G Wheel Loaders, and IT62G Integrated Toolcarrier
Refrigerant Compressor Functional Test for All Caterpillar Machines{1802}
Refrigerant Compressor Functional Test for All Caterpillar Machines{1802}
Specifications
Refrigerant Compressor
Air Conditioning and Heating R134a for All Caterpillar Machines
System Capacities for Refrigerant (Medium Wheel Loaders)
Air Conditioning and Heating R134a for All Caterpillar Machines
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Systems Operation
Refrigerant Compressor
Air Conditioning and Heating R134a for All Caterpillar Machines
Glossary of Terms
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Expansion Valve System
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Orifice Tube System
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Condenser
Air Conditioning and Heating R134a for All Caterpillar Machines
Evaporator Coil
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor Protection System
Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Air Conditioning System
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Expansion Valve
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Accumulator
Air Conditioning and Heating R134a for All Caterpillar Machines
In-line Refrigerant Dryer
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Receiver-Dryer
Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Heating System
Air Conditioning and Heating R134a for All Caterpillar Machines
Temperature Control
Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Refrigerant
Air Conditioning and Heating R134a for All Caterpillar Machines
Service Intervals
Air Conditioning and Heating R134a for All Caterpillar Machines
Condensate Drainage System
Air Conditioning and Heating R134a for All Caterpillar Machines
Cab Pressurization and Filtration System
Air Conditioning and Heating R134a for All Caterpillar Machines
General Information
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Orifice Tube Assembly
Air Conditioning and Heating R134a for All Caterpillar Machines
Information Release Memo
CAT FIELD INSTALLED AIR
CAT FIELD INSTALLED AIR
EXPANDED PRODUCT OFFERING FOR AIR
EXPANDED PRODUCT OFFERING FOR AIR
Testing and Adjusting
Refrigerant Recovery
Air Conditioning and Heating R134a for All Caterpillar Machines
Manifold Gauge Set (Refrigerant) - Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant System - Charge
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant System - Evacuate
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Leakage - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Manifold Gauge Set (Refrigerant) - Remove
Air Conditioning and Heating R134a for All Caterpillar Machines
Electronic Heat Control - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning Performance - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Oil - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant System - Flush
Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Testing and Adjusting
Air Conditioning and Heating R134a for All Caterpillar Machines
Compressor Protection System - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Heater Performance - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting
Required Tools
Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
General Troubleshooting Information
Air Conditioning and Heating R134a for All Caterpillar Machines
Visual Inspection (Troubleshooting)
Air Conditioning and Heating R134a for All Caterpillar Machines
Heating System Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting Condensate Drainage System
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning System Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting Heating and Air Conditioning Control System
Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control Panel Troubleshooting - 584 and 584HD Forwarders
Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control System (ECM Controlled) Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
General Troubleshooting Information
Air Conditioning and Heating R134a for All Caterpillar Machines
Disassembly and Assembly
Refrigerant Compressor - Remove and Install
966G Wheel Loader and 972G Wheel Loader Engine Supplement
Refrigerant Condenser - Remove and Install
966G Wheel Loader and 972G Wheel Loader Engine Supplement
Evaporator Coil - Remove and Install
966G Wheel Loader and 972G Wheel Loader Machine Systems
Heater Coil - Remove and Install
966G Wheel Loader and 972G Wheel Loader Machine Systems
Refrigerant Expansion Valve - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Accumulator - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Accumulator - Remove and Install
966G Wheel Loader and 972G Wheel Loader Machine Systems
In-Line Refrigerant Dryer - Remove and Install
966G Wheel Loader and 972G Wheel Loader Machine Systems
Air Conditioner Lines - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Disassembly and Assembly
Air Conditioning and Heating R134a for All Caterpillar Machines
In-Line Refrigerant Dryer - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Receiver-Dryer - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
General Information
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Orifice Tube Assembly - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Service Magazine
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
The In-line Refrigerant Dryer Is Improved And A New Dryer For Service Replacement Is Available {7320, 7322}
2000/02/07
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2003/05/05
Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
2000/10/30
Preparation of Air Conditioner Units for Seasonal Use {7320}
2002/05/27
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
2004/05/17
Heater and Air Conditioner Kits Are Now Available {7304, 7320}
2010/08/06
Correction to Service Magazine , "Heater and Air Conditioner Kits are Now Available" {7304, 7320}
2004/11/01
Refrigerant Identification Instrument is Available {1809}
2006/08/14
An Improved Motor For The Air Conditioning Condenser Is Now Available {1805, 1815, 5927, 7320}
2009/09/14
Correction to Troubleshooting , "Required Tools" {1808}
2010/10/06
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/06/06
An Air Conditioner Kit for Use When Servicing the Air Conditioning System Is Now Available {7320, 7320}
2012/08/24
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/08/19
Operation and Maintenance Manual
Rollover Protective Structure (ROPS) - Inspect
966G and 972G Wheel Loaders
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Replacing Bonded Windows {7310}
Replacing Bonded Windows {7310}
Improving the Environment of the Operator{7301}
Improving the Environment of the Operator{7301}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}
Technical Information Bulletin
Rust Developing On Cab Doors
Rust Developing On Cab Doors
Accessibility Underneath Cab
Accessibility Underneath Cab
Specifications
Cab Mounting
966G Wheel Loader and 972G Wheel Loader Power Train
Disassembly and Assembly
Cab - Remove
966G Wheel Loader and 972G Wheel Loader Machine Systems
Cab - Install
966G Wheel Loader and 972G Wheel Loader Machine Systems
Service Magazine
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Use 147-1924 Portable Printer For Use On Wheel Loaders Equipped With The Payload Control System
1999/03/08
Correction To Testing And Adjusting Manual, RENR2148-01 {0374,1435,5700,5700}
1999/03/08
Effectivity Of Product Support Literature For Caterpillar Monitoring System {0374,7490}
1999/09/20
Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
2000/10/30
Material for Sound Suppression in the Cab is Available {7301, 7325, 7329, 7330}
2001/01/22
A Repair Kit is Now Available for Cabs with Nonmetallic Floors {7301}
2003/06/30
Cab Certification {7323, 7325}
2005/03/21
Ordering a Replacement Operator Protective Structure (OPS) Certification Film {7323, 7325, 7405, 7557}
2007/02/12
Direct Shipping Process and New Packaging for Replacement Glass {7301, 7308, 7310, 7325}
2007/03/26
Use of Dry Lubricant is Recommended {0645, 7301}
2008/08/11
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
2009/11/02
Technical Information Bulletin
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Improved Start Switch Used{1416}
1987/05/25
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Four Bearings Are Now Used On the Hydraulic Control Support (Armrest) {5258}
2010/10/13
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Operation and Maintenance Manual
Steering Control
966G and 972G Wheel Loaders
Steering Column Tilt Control
966G and 972G Wheel Loaders
Steering Wheel Telescopic Control - Command Control Steering
966G and 972G Wheel Loaders
Steering Shaft (Command Control Steering) - Lubricate
966G and 972G Wheel Loaders
Special Instruction
Procedure to Install the Horn Button{7332, 7402}
Procedure to Install the Horn Button{7332, 7402}
Service Letter-NACD
A COVER ASSEMBLY NEEDS TO BE INSTALLED OVER THE STEERING SHAFT ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
A COVER ASSEMBLY NEEDS TO BE INSTALLED OVER THE STEERING SHAFT ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Steering Control
966G Wheel Loader and 972G Wheel Loader Steering System
Service Letter-China
A COVER ASSEMBLY NEEDS TO BE INSTALLED OVER THE STEERING SHAFT ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
A COVER ASSEMBLY NEEDS TO BE INSTALLED OVER THE STEERING SHAFT ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Command Control Steering - Adjust
966G Wheel Loader and 972G Wheel Loader Steering System
Steering Time - Check - Command Control Steering
966G Wheel Loader and 972G Wheel Loader Steering System
Disassembly and Assembly
Steering Wheel - Remove and Install
966G Wheel Loader and 972G Wheel Loader Machine Systems
Steering Shaft - Remove and Install
966G Wheel Loader and 972G Wheel Loader Machine Systems
Service Magazine
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Maintenance Instruction Has Been Added for HMU Steering {4310, 4343}
2007/03/12
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/08/19
Special Instruction
Replacing Bonded Windows {7310}
Replacing Bonded Windows {7310}
Technical Information Bulletin
Rust Developing On Cab Doors
Rust Developing On Cab Doors
Service Magazine
Direct Shipping Process and New Packaging for Replacement Glass {7301, 7308, 7310, 7325}
2007/03/26
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Operation and Maintenance Manual
Cab Air Filter - Clean/Replace
966G and 972G Wheel Loaders
Service Magazine
Air Filter Maintenance{1051,1054}
1991/09/30
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Operation and Maintenance Manual
Cab Air Filter - Clean/Replace
966G and 972G Wheel Loaders
Special Instruction
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}
Service Magazine
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2003/05/05
An Improved Handle Control Group is Now Available {5063, 5705}
2006/11/20
Operation and Maintenance Manual
Heating and Air Conditioning Control
966G and 972G Wheel Loaders
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Systems Operation
Glossary of Terms
Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Heating System
Air Conditioning and Heating R134a for All Caterpillar Machines
Service Intervals
Air Conditioning and Heating R134a for All Caterpillar Machines
Testing and Adjusting
Electronic Heat Control - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting
Required Tools
Air Conditioning and Heating R134a for All Caterpillar Machines
Heating System Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting Heating and Air Conditioning Control System
Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control Panel Troubleshooting - 584 and 584HD Forwarders
Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control System (ECM Controlled) Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Disassembly and Assembly
Heater Coil - Remove and Install
966G Wheel Loader and 972G Wheel Loader Machine Systems
Service Magazine
Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
2000/10/30
Heater and Air Conditioner Kits Are Now Available {7304, 7320}
2010/08/06
Correction to Service Magazine , "Heater and Air Conditioner Kits are Now Available" {7304, 7320}
2004/11/01
New Gauges Available {7450}
2010/07/08
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Use Improved Heat Start Switch{1416}
1987/04/20
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Improved Start Switch Used{1416}
1987/05/25
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Operation and Maintenance Manual
Payload Control System (PCS) - If Equipped
966G and 972G Wheel Loaders
General Information
Payload Control System
Weighing Material
Payload Control System
General Keypad Operations
Payload Control System
Operator Setup Functions
Payload Control System
Owner Setup Functions
Payload Control System
System Calibration
Payload Control System
Normal Weighing Mode
Payload Control System
Keypad Modes and Functions
Payload Control System
Payload Control System/PC Off-Board System
Payload Control System
Caterpillar Reference Material
Payload Control System
Additional Reference Material
Payload Control System
Warranty Information
Payload Control System
Display - Clean
Work Area Vision System
Display Position Adjustment
Work Area Vision System
Display Picture Adjustment - Select Display Settings
Work Area Vision System
Display Description
Work Area Vision System
Special Instruction
Installation and Operation of the Caterpillar Messenger Driver Information Display{7490}
Installation and Operation of the Caterpillar Messenger Driver Information Display{7490}
Supplemental Documentation for the Payload Control System{7494}
Supplemental Documentation for the Payload Control System{7494}
Installation Instructions for the 267-6573 Camera Ar (Kit){7347, 7348}
Installation Instructions for the 267-6573 Camera Ar (Kit){7347, 7348}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
WAVS Installation Guide for Generic Applications{7347, 7348}
WAVS Installation Guide for Generic Applications{7347, 7348}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of Cat<SUP>&reg;</SUP> Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of Cat® Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
WAVS Generic Installation Guide for Certain Cat<SUP>&reg;</SUP> Products{7347, 7348}
WAVS Generic Installation Guide for Certain Cat® Products{7347, 7348}
WAVS Light Duty Installation Guide for Certain Cat<SUP>&reg;</SUP> Products{7347, 7348}
WAVS Light Duty Installation Guide for Certain Cat® Products{7347, 7348}
Updating Certain Cat<SUP>&reg;</SUP> Machines from EMS II to EMS III {7490, 7610, 7620}
Updating Certain Cat® Machines from EMS II to EMS III {7490, 7610, 7620}
Installation of G610 Hardware for Cat<SUP>&reg;</SUP> Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Technical Information Bulletin
Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off
Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off
Multiple Registration Messages Occur with Product Link{733T, 7606}
Multiple Registration Messages Occur with Product Link{733T, 7606}
Systems Operation
Service Meter Mode
Caterpillar Monitoring System
Odometer Mode
Caterpillar Monitoring System
Numeric Readout Mode
Caterpillar Monitoring System
Tattletale Mode
Caterpillar Monitoring System
Units Mode
Caterpillar Monitoring System
Setup Mode
Caterpillar Monitoring System
General Information
Caterpillar Monitoring System
Component Description
Caterpillar Monitoring System
Related Components
Caterpillar Monitoring System
Scrolling Mode
Caterpillar Monitoring System
Display Components
Caterpillar Monitoring System
Speedometer/Tachometer Module
Caterpillar Monitoring System
Warning Operation
Caterpillar Monitoring System
Main Display Module
Caterpillar Monitoring System
Service Mode
Caterpillar Monitoring System
System Setup Procedure
Payload Control System (PCS) 2.X
Normal Mode
Caterpillar Monitoring System
Harness Code Mode
Caterpillar Monitoring System
Alert Indicator Description
Caterpillar Monitoring System
Quad Gauge Module
Caterpillar Monitoring System
Tachometer Mode
Caterpillar Monitoring System
Calibration Mode
Caterpillar Monitoring System
Maintenance Mode
Caterpillar Monitoring System
Component Description
Work Area Visual System
Configuration
Work Area Visual System
General Information
Work Area Visual System
Modes of Operation
Work Area Visual System
System Setup
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Additional Key Functions
Payload Control System (PCS) 2.X
Component Description
Payload Control System (PCS) 2.X
Payload Electronic Control Module
Payload Control System (PCS) 2.X
Keypad
Payload Control System (PCS) 2.X
Service Display Mode
Payload Control System (PCS) 2.X
Calibration (Fine Tune)
Payload Control System (PCS) 2.X
Normal Weighing Operation
Payload Control System (PCS) 2.X
General Information
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Modes of Operation
Caterpillar Monitoring System
Sensors
Payload Control System (PCS) 2.X
Calibration
Payload Control System (PCS) 2.X
Payload Control System/PC Off-Board System
Payload Control System (PCS) 2.X
Component Description
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Zero Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Reweigh Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Download Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Weighing Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
General Information
Payload Control System (PCS) 2.X
Custom Service Information
Installation Instructions for the 267-6573 Camera Ar (Kit){7347, 7348}
Installation Instructions for the 267-6573 Camera Ar (Kit){7347, 7348}
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
Testing and Adjusting
Glossary of Terms
Caterpillar Monitoring System
System Self Test
Caterpillar Monitoring System
Module - Replace
Caterpillar Monitoring System
Main Display Module Initialization - Adjust
Caterpillar Monitoring System
Wiring Harness (Open Circuit) - Test
Payload Control System (PCS) 2.X
Wiring Harness (Short Circuit) - Test
Payload Control System (PCS) 2.X
Connector Contact Description of Main Display Module
Caterpillar Monitoring System
Main Display Module - Flash Program
Caterpillar Monitoring System
Electrical Connector - Inspect
Payload Control System (PCS) 2.X
Electronic Control Module (ECM) - Flash Program
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
System Schematic
Work Area Visual System
Troubleshooting
Work Area Visual System
General Information
Work Area Visual System
System Tests
Work Area Visual System
Electronic Control Module (ECM) - Replace
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Payload Electronic Control Module - Replace
Payload Control System (PCS) 2.X
Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X
Battery (Internal Backup) - Replace
Payload Control System (PCS) 2.X
Glossary of Electrical Terms
Payload Control System (PCS) 2.X
System Schematic
Payload Control System (PCS) 2.X
Calibration
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Electronic Control Module (ECM) - Configure
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Troubleshooting
General Information
Payload Control System (PCS) 2.X
MID 030 - CID 0248 - FMI 02
Caterpillar Monitoring System
Diagnostic Code List
Caterpillar Monitoring System
MID 030 - CID 0821 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0821 - FMI 04
Caterpillar Monitoring System
Alert Indicator Is Always Flashing
Caterpillar Monitoring System
Alert Indicator Never Flashes
Caterpillar Monitoring System
Harness Code
Caterpillar Monitoring System
MID 030 - CID 0819 - FMI 02
Caterpillar Monitoring System
General Information
Caterpillar Monitoring System
Diagnostic Capabilities
Caterpillar Monitoring System
Using Caterpillar Monitoring System to Determine Diagnostic Codes
Caterpillar Monitoring System
General Information
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Using Messenger to Determine Diagnostic Codes
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0591 - FMI 12
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Error and Warning Messages
Payload Control System (PCS) 2.X
Payload Control System Troubleshooting without Diagnostic Codes
Payload Control System (PCS) 2.X
Using Service Display Mode to Determine Diagnostic Codes
Payload Control System (PCS) 2.X
Diagnostic Code List
Payload Control System (PCS) 2.X
MID 074 - CID 0254 - FMI 12
Payload Control System (PCS) 2.X
MID 074 - CID 0254 - FMI 13
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0817 - FMI 04
Payload Control System (PCS) 2.X
MID 074 - CID 0817 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0817 - FMI 12
Payload Control System (PCS) 2.X
MID 074 - CID 0820 - FMI 02
Payload Control System (PCS) 2.X
MID 030 - CID 0819 - FMI 15
Caterpillar Monitoring System
MID 030 - CID 0819 - FMI 31
Caterpillar Monitoring System
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Use 147-1924 Portable Printer For Use On Wheel Loaders Equipped With The Payload Control System
1999/03/08
Flash Software Now Available For Wheel Loader Payload Control System (PCS) {7620,7494}
1999/08/09
New Keypad Now Used With Payload Control System (PCS) {7494}
1999/08/09
Effectivity Of Product Support Literature For Caterpillar Monitoring System {0374,7490}
1999/09/20
Resetting the Date on the Wheel Loader's Payload Control System (PCS) for Y2K {7494}
2000/01/03
Procedure to Enter the Correct Password for the Calibration Procedure on the Payload Control System (PCS) {7494}
2000/03/27
Replacement Procedure for the Internal Backup Battery of the Payload Control System (PCS) {1401}
2001/04/09
Special Instruction, REHS1640, &quot;Additional Documentation for the Payload Control System&quot; Is Available {0374, 7494}
2003/04/14
Latest Version of Payload Control System (PCS) Software Is Now Available {7620}
2003/04/07
Latest Version of Payload Control System (PCS) Software Is Now Available {7620}
2003/11/10
New Software Available for Payload Control System (PCS) {7494, 7620}
2006/08/14
New Gauges Available {7450}
2010/07/08
Improved VisionLink<SUP>TM</SUP> Software Is Now Available for Certain Caterpillar Machines {7601}
2012/09/11
New Electronic Monitoring System (EMS III) is Now Used on Certain Cat Products {7490}
2013/04/03
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
New Phone Number for VIMS Support Is Now Available for All Cat<SUP>&reg;</SUP> Products Equipped with VIMS {7601}
2015/03/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Ether Starting Aid - If Equipped
966G and 972G Wheel Loaders
Engine Start Switch
966G and 972G Wheel Loaders
Directional Turn Signal and Hazard Flasher Control - If Equipped
966G and 972G Wheel Loaders
Display Modules (Caterpillar Monitoring System)
966G and 972G Wheel Loaders
Light Switches
966G and 972G Wheel Loaders
Window Wiper and Washer Control
966G and 972G Wheel Loaders
Heating and Air Conditioning Control
966G and 972G Wheel Loaders
Transmission Neutralizer Override Control
966G and 972G Wheel Loaders
Autoshift Control - Earlier Machines
966G and 972G Wheel Loaders
Fuses - Replace
966G and 972G Wheel Loaders
General Information
Payload Control System
Weighing Material
Payload Control System
General Keypad Operations
Payload Control System
Operator Setup Functions
Payload Control System
Owner Setup Functions
Payload Control System
System Calibration
Payload Control System
Normal Weighing Mode
Payload Control System
Keypad Modes and Functions
Payload Control System
Payload Control System/PC Off-Board System
Payload Control System
Caterpillar Reference Material
Payload Control System
Additional Reference Material
Payload Control System
Warranty Information
Payload Control System
Functional Test (Caterpillar Monitoring System)
966G and 972G Wheel Loaders
Indicators
966G and 972G Wheel Loaders
Diagnostic Codes (Caterpillar Monitoring System)
966G and 972G Wheel Loaders
Variable Shift Control
966G and 972G Wheel Loaders
Autoshift Control - Later Machines
966G and 972G Wheel Loaders
Warning Categories (Caterpillar Monitoring System)
966G and 972G Wheel Loaders
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Technical Information Bulletin
Removing Invalid Service Codes (MID 030, CID 511, FMI 55)
Removing Invalid Service Codes (MID 030, CID 511, FMI 55)
Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off
Logged Service Codes Are Erased On Certain Monitoring System Modules When The Key Switch Is Turned Off
Systems Operation
Action Lamp
Caterpillar Monitoring System
Action Alarm
Caterpillar Monitoring System
Monitoring System (Hydraulic Functions)
966G Wheel Loader and 972G Wheel Loader Hydraulic System
Monitoring System
966G Wheel Loader and 972G Wheel Loader Steering System
Monitoring System (Power Train Functions)
966G Wheel Loader and 972G
Wheel Loader Power Train
Rocker Switch (Transmission Neutralizer Override Control)
966G Wheel Loader and 972G Wheel Loader Braking System
Display Components
Caterpillar Monitoring System
Speedometer/Tachometer Module
Caterpillar Monitoring System
System Setup Procedure
Payload Control System (PCS) 2.X
Monitoring System (Braking Functions)
966G Wheel Loader and 972G Wheel Loader Braking System
Quad Gauge Module
Caterpillar Monitoring System
System Setup
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Additional Key Functions
Payload Control System (PCS) 2.X
Component Description
Payload Control System (PCS) 2.X
Payload Electronic Control Module
Payload Control System (PCS) 2.X
Keypad
Payload Control System (PCS) 2.X
Service Display Mode
Payload Control System (PCS) 2.X
Calibration (Fine Tune)
Payload Control System (PCS) 2.X
Normal Weighing Operation
Payload Control System (PCS) 2.X
General Information
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Sensors
Payload Control System (PCS) 2.X
Calibration
Payload Control System (PCS) 2.X
Payload Control System/PC Off-Board System
Payload Control System (PCS) 2.X
Component Description
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Zero Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Reweigh Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Download Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Weighing Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
General Information
Payload Control System (PCS) 2.X
Custom Service Information
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
Testing and Adjusting
CID 0270 FMI 09 Caterpillar Monitoring System Harness Code Abnormal Update - Test
966G Wheel Loader and 972G
Wheel Loader Power Train
CID 0270 FMI 12 Caterpillar Monitoring System Harness Code Failed - Test
966G Wheel Loader and 972G
Wheel Loader Power Train
CID 0562 FMI 09 Caterpillar Monitoring System Abnormal Update - Test
966G Wheel Loader and 972G
Wheel Loader Power Train
CID 0795 FMI 03 Relay (Secondary Steering Intermediate) Voltage Above Normal - Test
966G Wheel Loader and 972G
Wheel Loader Power Train
CID 0795 FMI 05 Relay (Secondary Steering Intermediate) Current Below Normal - Test
966G Wheel Loader and 972G
Wheel Loader Power Train
CID 0795 FMI 06 Relay (Secondary Steering Intermediate) Current Above Normal - Test
966G Wheel Loader and 972G
Wheel Loader Power Train
CID 0795 FMI 07 Relay (Secondary Steering Intermediate) Improper Mechanical Response - Test
966G Wheel Loader and 972G
Wheel Loader Power Train
CID 0270 FMI 02 Caterpillar Monitoring System Harness Code Incorrect - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0270 FMI 09 Caterpillar Monitoring System Harness Code Abnormal Update - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0365 FMI 04 Switch (Kickout Set) Voltage Below Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0365 FMI 05 Switch (Kickout Set) Current Below Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0368 FMI 03 Rotary Switch (Transmission Auto/Man) Voltage Above Normal - Test - Command Control Steering-Without Integrated Braking System
966G Wheel Loader and 972G
Wheel Loader Power Train
CID 0368 FMI 04 Rotary Switch (Transmission Auto/Man) Voltage Below Normal - Test - Command Control Steering-Without Integrated Braking System
966G Wheel Loader and 972G
Wheel Loader Power Train
Wiring Harness (Open Circuit) - Test
Payload Control System (PCS) 2.X
Wiring Harness (Short Circuit) - Test
Payload Control System (PCS) 2.X
CID 1521 FMI 03 Rotary Switch (Variable Shift Control) Voltage Above Normal - Test
966G Wheel Loader and 972G
Wheel Loader Power Train
CID 1521 FMI 04 Rotary Switch (Variable Shift Control) Voltage Below Normal - Test
966G Wheel Loader and 972G
Wheel Loader Power Train
CID 0368 FMI 03 Rotary Switch (Transmission Auto/Man) Voltage Above Normal - Test - Command Control Steering-Integrated Braking System
966G Wheel Loader and 972G
Wheel Loader Power Train
CID 0368 FMI 04 Rotary Switch (Transmission Auto/Man) Voltage Below Normal - Test - Command Control Steering-Integrated Braking System
966G Wheel Loader and 972G
Wheel Loader Power Train
Electrical Connector - Inspect
Payload Control System (PCS) 2.X
Electronic Control Module (ECM) - Flash Program
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Electronic Control Module (ECM) - Replace
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Payload Electronic Control Module - Replace
Payload Control System (PCS) 2.X
Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X
Battery (Internal Backup) - Replace
Payload Control System (PCS) 2.X
Glossary of Electrical Terms
Payload Control System (PCS) 2.X
System Schematic
Payload Control System (PCS) 2.X
Calibration
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Electronic Control Module (ECM) - Configure
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Troubleshooting
General Information
Payload Control System (PCS) 2.X
General Information
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Using Messenger to Determine Diagnostic Codes
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0591 - FMI 12
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Error and Warning Messages
Payload Control System (PCS) 2.X
Payload Control System Troubleshooting without Diagnostic Codes
Payload Control System (PCS) 2.X
Using Service Display Mode to Determine Diagnostic Codes
Payload Control System (PCS) 2.X
Diagnostic Code List
Payload Control System (PCS) 2.X
MID 074 - CID 0254 - FMI 12
Payload Control System (PCS) 2.X
MID 074 - CID 0254 - FMI 13
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0817 - FMI 04
Payload Control System (PCS) 2.X
MID 074 - CID 0817 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0817 - FMI 12
Payload Control System (PCS) 2.X
MID 074 - CID 0820 - FMI 02
Payload Control System (PCS) 2.X
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Use 147-1924 Portable Printer For Use On Wheel Loaders Equipped With The Payload Control System
1999/03/08
Flash Software Now Available For Wheel Loader Payload Control System (PCS) {7620,7494}
1999/08/09
New Keypad Now Used With Payload Control System (PCS) {7494}
1999/08/09
Effectivity Of Product Support Literature For Caterpillar Monitoring System {0374,7490}
1999/09/20
New Caterpillar Monitoring System Warning Category {7490}
2000/04/10
Correction to Systems Operation, SENR1394 , "Harness Code Mode" {7490}
2000/07/03
Correction to the Directional Turn Signal and Hazard Flasher Control in the Operation and Maintenance Manual {1429, 7332, 7451}
2000/08/14
Harness Codes for Medium Wheel Loaders Equipped with the Integrated Braking System Omitted from Service Manual, SENR1394 {7490}
2001/08/06
Correction to Operation and Maintenance Manual , "Fuses-Replace" {1417}
2002/06/10
Latest Version of Payload Control System (PCS) Software Is Now Available {7620}
2003/11/10
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
Operation and Maintenance Manual
Governor Control
966G and 972G Wheel Loaders
Technical Information Bulletin
Foot Brake Control Pedal Assembly
Foot Brake Control Pedal Assembly
Special Instruction
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}
Service Magazine
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Special Instruction
Change the Frequency Band of Entertainment Radios {7338}
Change the Frequency Band of Entertainment Radios {7338}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Technical Information Bulletin
Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606}
Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606}
Product Link Registration Problems{733T, 7606}
Product Link Registration Problems{733T, 7606}
Leaks Have Been Reported Between the Antenna and the Cab on Certain Cat Product{7338}
Leaks Have Been Reported Between the Antenna and the Cab on Certain Cat Product{7338}
Tool Operating Manual
317-7492 Wireless Radio{7338}
317-7492 Wireless Radio{7338}
Service Magazine
New 12 Volt AM/FM Radios Are Available {7338}
2000/03/20
New TC900B Radio Part Numbers {733T}
2003/06/02
New Processes Improve Registration of Product Link {7338, 7606}
2008/04/14
A New Antenna For The Product Link Is Available {7010, 733T}
2008/06/09
Special Instruction
Inspection, Maintenance, and Repair of Operator Protective Structures (OPS) and Attachment Installation Guidelines for All Earthmoving Machinery, If Equipped {7323, 7325}
Inspection, Maintenance, and Repair of Operator Protective Structures (OPS) and Attachment Installation Guidelines for All Earthmoving Machinery, If Equipped {7323, 7325}
Technical Information Bulletin
Accessibility Underneath Cab
Accessibility Underneath Cab
Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS) {7323, 7325, 7715}
Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS) {7323, 7325, 7715}
Service Magazine
Ordering a Replacement Operator Protective Structure (OPS) Certification Film {7323, 7325, 7405, 7557}
2007/02/12
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27
Operation and Maintenance Manual
Seat Adjustment and Seat Belt Inspection
966G and 972G Wheel Loaders
Seat
966G and 972G Wheel Loaders
Suspension Seat
966G and 972G Wheel Loaders
Seat Belt - Replace
966G and 972G Wheel Loaders
Seat Belt
966G and 972G Wheel Loaders
Special Instruction
Installation Instruction for 212-7779 Shock Absorber Kit , 192-7848 Shock Absorber Kit , and 213-5170 Indicator Kit on Toggle Link Vertical (TLV) Seat Suspensions {7324}
Installation Instruction for 212-7779 Shock Absorber Kit , 192-7848 Shock Absorber Kit , and 213-5170 Indicator Kit on Toggle Link Vertical (TLV) Seat Suspensions {7324}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Technical Information Bulletin
Operator Seat Belt Not Retracting {7327}
Operator Seat Belt Not Retracting {7327}
Systems Operation
Mechanical Suspension
Contour Series Seat
Comfort Seat Air Suspension with Air Compressor
Comfort Series Seat For Caterpillar Machines
Comfort Seat with Lumbar, Side Controls, and Slide Swivel
Comfort Series Seat For Caterpillar Machines
Serial Number Effectivity
Comfort Series Seat For Caterpillar Machines
Comfort Seat Air Suspension with System Air
Comfort Series Seat For Caterpillar Machines
Comfort Seat Controls
Comfort Series Seat For Caterpillar Machines
Optimized Seat Air Suspension with Air Compressor
Comfort Series Seat For Caterpillar Machines
Optimized Seat Controls
Comfort Series Seat For Caterpillar Machines
Optimized Seat with Lumbar, Side Controls, and Slide Swivel
Comfort Series Seat For Caterpillar Machines
Seat Maintenance Interval Schedule
Comfort Series Seat For Caterpillar Machines
General Information
Comfort Series Seat For Caterpillar Machines
Component Descriptions
Comfort Series Seat For Caterpillar Machines
Troubleshooting
Comfort Series Seat For Caterpillar Machines
General Information
Caterpillar Advanced Ride Management (CARM) Seat Suspension System
Component Descriptions
Caterpillar Advanced Ride Management (CARM) Seat Suspension System
Testing and Adjusting
Troubleshooting Chart
Comfort Series Seat For Caterpillar Machines
Troubleshooting
Troubleshooting
Caterpillar Advanced Ride Management (CARM) Seat Suspension System
Disassembly and Assembly
Swivel Seat - Disassemble
Contour Series Seat
Swivel Seat - Assemble
Contour Series Seat
Air Suspension With Toggle Switch Height Adjustment - Disassemble
Contour Series Seat
Air Suspension With Toggle Switch Height Adjustment - Assemble
Comfort Series Seat For Caterpillar Machines
Air Suspension With System Air - Disassemble
Comfort Series Seat For Caterpillar Machines
Air Suspension With System Air - Assemble
Contour Series Seat
Mechanical Suspension With Fixed Damper - Disassemble
Comfort Series Seat For Caterpillar Machines
Mechanical Suspension With Fixed Damper - Assemble
Contour Series Seat
Mechanical Suspension With Variable Damper - Disassemble
Contour Series Seat
Mechanical Suspension With Variable Damper - Assemble
Contour Series Seat
Seat - Remove and Install
966G Wheel Loader and 972G Wheel Loader Machine Systems
Comfort Seat with Lumbar Option and Side Controls - Disassemble
Comfort Series Seat For Caterpillar Machines
Comfort Seat with Lumbar Option and Side Controls - Assemble
Comfort Series Seat For Caterpillar Machines
Air Suspension with Air Valve Knob Height Adjustment - Disassemble
Contour Series Seat
Air Suspension With Air Valve Knob Height Adjustment - Assemble
Contour Series Seat
Comfort Seat Air Suspension with Air Compressor - Assemble
Comfort Series Seat For Caterpillar Machines
Comfort Seat Air Suspension with Air Compressor - Disassemble
Comfort Series Seat For Caterpillar Machines
Comfort Seat with Front Controls - Disassemble
Comfort Series Seat For Caterpillar Machines
Comfort Seat with Front Controls - Assemble
Comfort Series Seat For Caterpillar Machines
Optimized Seat with Front Controls - Disassemble and Assemble
Comfort Series Seat For Caterpillar Machines
Service Magazine
Correction to Service Magazine , "New Slider Block Kit Improves Suspension Seat Ride" {7324}
2000/05/15
Longer Seat Belts Can Be Installed If Necessary {7327}
2005/09/19
A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324}
A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324}
An Increased Capacity Shock is Now Available for Cat Comfort Seats That Are Equipped With Toggle Link Vertical Suspensions {7324}
2009/09/21
Operation and Maintenance Manual
Hydraulic Control Support
966G and 972G Wheel Loaders
Special Instruction
Procedure for Changing a Hydraulic Control Support That Has Three Bearings to a Hydraulic Control Support That Has Four Bearings{5258}
Procedure for Changing a Hydraulic Control Support That Has Three Bearings to a Hydraulic Control Support That Has Four Bearings{5258}
Service Magazine
Material for Sound Suppression in the Cab is Available {7301, 7325, 7329, 7330}
2001/01/22
Engine News
New Electronic Tachometers Have Different Connection To Wiring Harness {7462}
2001/08/01
Service Magazine
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Special Instruction
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Troubleshooting
Service Tools
Payload Control System (PCS) 2.X
Service Magazine
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Operation and Maintenance Manual
Window Wiper and Washer Control
966G and 972G Wheel Loaders
Window Washer Reservoir - Fill
966G and 972G Wheel Loaders
Service Magazine
Washer Pump Assemblies Must Be Primed Properly {7306}
2007/08/06
Operation and Maintenance Manual
Windows - Clean
966G and 972G Wheel Loaders
Alternate Exit
966G and 972G Wheel Loaders
Special Instruction
Replacing Bonded Windows {7310}
Replacing Bonded Windows {7310}
Service Magazine
Washer Pump Assemblies Must Be Primed Properly {7306}
2007/08/06
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
2009/11/02
Operation and Maintenance Manual
Window Wiper and Washer Control
966G and 972G Wheel Loaders
Window Wiper - Inspect/Replace
966G and 972G Wheel Loaders
Specifications
Window Wiper and Wiper Motor
966G Wheel Loader and 972G Wheel Loader Power Train
Disassembly and Assembly
Window Wiper and Wiper Motor (Front) - Remove
966G Wheel Loader and 972G Wheel Loader Machine Systems
Window Wiper and Wiper Motor (Front) - Install
966G Wheel Loader and 972G Wheel Loader Machine Systems
Window Wiper and Wiper Motor (Rear) - Remove
966G Wheel Loader and 972G Wheel Loader Machine Systems
Window Wiper and Wiper Motor (Rear) - Install
966G Wheel Loader and 972G Wheel Loader Machine Systems
Service Magazine
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Washer Pump Assemblies Must Be Primed Properly {7306}
2007/08/06
The Length of the Wires Leading to the Wiper Motor Have Been Lengthened to Improve Reliability {5927, 7305}
2005/12/19
Improved Window Wiper Motors Now Used {7305}
2008/11/10
Technical Information Bulletin
Product Link Antenna Placement{7606}
Product Link Antenna Placement{7606}
Operation and Maintenance Manual
Tilt Control
966G and 972G Wheel Loaders
Multipurpose Bucket Control - If Equipped
966G and 972G Wheel Loaders
Implement Lockout Control
966G and 972G Wheel Loaders
Lift Control
966G and 972G Wheel Loaders
Side Dump Bucket Control - If Equipped
966G and 972G Wheel Loaders
Logging Fork Clamp Control - If Equipped
966G and 972G Wheel Loaders
Auxiliary Control (Third Lever Function)
966G and 972G Wheel Loaders
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
Technical Information Bulletin
Machines Equipped With Third Implement Control Lever
Machines Equipped With Third Implement Control Lever
Specifications
Detent Coil (Control Lever)
966G Wheel Loader and 972G
Wheel Loader Hydraulic System
Hydraulic Electronic Control
966G Wheel Loader and 972G
Wheel Loader Hydraulic System
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
Systems Operation
Detent Coils (Control Lever)
966G Wheel Loader and 972G Wheel Loader Hydraulic System
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC/ELECTRICAL CONTROLS MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTROHYDRAULIC CONTROLS THAT MAY BIND ON CERTAIN 950G, 962G, 966G, 972G AND 980G WHEEL LOADERS
Testing and Adjusting
CID 0352 FMI 00 Position Sensor (Lift Lever) Above Normal Range - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0353 FMI 00 Position Sensor (Tilt Lever) Above Normal Range - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0487 FMI 00 Position Sensor (Auxiliary Lever) Above Normal Range - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0352 FMI 01 Position Sensor (Lift Lever) Below Normal Range - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0353 FMI 01 Position Sensor (Tilt Lever) Below Normal Range - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0352 FMI 13 Position Sensor (Lift Lever) Out of Calibration - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0353 FMI 13 Position Sensor (Tilt Lever) Out of Calibration - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0487 FMI 13 Position Sensor (Auxiliary Lever) Out of Calibration - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0359 FMI 03 Detent Coil (Lift Lever Raise) Voltage Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0360 FMI 03 Detent Coil (Lift Lever Lower) Voltage Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0361 FMI 03 Detent Coil (Tilt Lever Tilt Back) Voltage Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0489 FMI 04 Rocker Switch (Implement Function Selector) Voltage Below Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0490 FMI 04 Switch (Implement Lockout) Voltage Below Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0489 FMI 05 Rocker Switch (Implement Function Selector) Current Below Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0490 FMI 05 Switch (Implement Lockout) Current Below Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0359 FMI 05 Detent Coil (Lift Lever Raise) Current Below Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0359 FMI 06 Detent Coil (Lift Lever Raise) Current Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0360 FMI 05 Detent Coil (Lift Lever Lower) Current Below Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0360 FMI 06 Detent Coil (Lift Lever Lower) Current Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0361 FMI 05 Detent Coil (Tilt Lever Tilt Back) Current Below Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
CID 0361 FMI 06 Detent Coil (Tilt Lever Tilt Back) Current Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Electro-Hydraulic System
Disassembly and Assembly
Hydraulic Electronic Control - Remove and Install
966G Wheel Loader and 972G Wheel Loader Machine Systems
Service Magazine
Improved Procedure for Adjusting The Bracket Assembly In The Control Group On Certain Wheel Loaders {5702}
2010/10/01
Operation and Maintenance Manual
Tilt Control
966G and 972G Wheel Loaders
Multipurpose Bucket Control - If Equipped
966G and 972G Wheel Loaders
Implement Lockout Control
966G and 972G Wheel Loaders
Lift Control
966G and 972G Wheel Loaders
Side Dump Bucket Control - If Equipped
966G and 972G Wheel Loaders
Logging Fork Clamp Control - If Equipped
966G and 972G Wheel Loaders
Auxiliary Control (Third Lever Function)
966G and 972G Wheel Loaders
Technical Information Bulletin
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
Operation and Maintenance Manual
Transmission Control - Command Control Steering
966G and 972G Wheel Loaders
Autoshift Control - Earlier Machines
966G and 972G Wheel Loaders
Autoshift Control - Later Machines
966G and 972G Wheel Loaders
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION SHIFTER IN CERTAIN IT28G, IT38G, AND IT62G INTEGRATED TOOL CARRIERS; AND 924G, 928G, 938G, 950G, 962G, 966G, AND 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION SHIFTER IN CERTAIN IT28G, IT38G, AND IT62G INTEGRATED TOOL CARRIERS; AND 924G, 928G, 938G, 950G, 962G, 966G, AND 972G WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
For Calibration Of Transmission Clutch Engagement - Use Only 4C-8195 Control Service Tool
For Calibration Of Transmission Clutch Engagement - Use Only 4C-8195 Control Service Tool
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION SHIFTER IN CERTAIN IT28G, IT38G, AND IT62G INTEGRATED TOOL CARRIERS; AND 924G, 928G, 938G, 950G, 962G, 966G, AND 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION SHIFTER IN CERTAIN IT28G, IT38G, AND IT62G INTEGRATED TOOL CARRIERS; AND 924G, 928G, 938G, 950G, 962G, 966G, AND 972G WHEEL LOADERS
Service Letter-Asia
Service Letter-APD
Service Magazine
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27

Truck sale:

Caterpillar 972G
 
Caterpillar 972G
- bucket
FINNING CANADA
Caterpillar 972G, Construction
71,000 
Caterpillar 972G, Construction
- Wheel Loaders
BUTLER MACHINERY COMPANY
Caterpillar 972G, Construction
53,385 
Caterpillar 972G, Construction
- Wheel Loaders
WILLIAM ADAMS PTY. LTD.
Australia
 
55,000 
Caterpillar 972G, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 972G, Construction
49,000 
Caterpillar 972G, Construction
- Wheel Loaders
QUINN COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.