AVSPARE.COM
parts catalog

147-9592 PISTON & ROD GP S/N 6JK4931-UP 17:1 RATIO PART OF 153-7319 ENGINE AR-CORE 962G WHEEL LOADER


BASIC ENGINE
PISTON & ROD GP
SUPPRESSION GP-SOUND
CYLINDER BLOCK GP
PULLEY GP
VALVE MECHANISM GP
CRANKSHAFT GP
HOUSING GP-FLYWHEEL
LUBRICATION SYSTEM
BREATHER GP
FILLER GP-ENGINE OIL
FILTER GP-ENGINE OIL


BASIC ENGINE

PISTON & ROD GP
 

#SEBC13030030
 

147-9592: PISTON & ROD GP

147-9592 PISTON & ROD GP
S/N 6JK4931-UP
17:1 RATIO
PART OF 153-7319 ENGINE AR-CORE
i00695314 SEBC1303
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-4983 [1] CROWN AS-PISTON  
2. 132-5246 [1] RING-PISTON (TOP)  
3. 107-7630 [1] RING-PISTON (INTERMEDIATE)  
4. 107-7566 [1] RING-PISTON (OIL REGULATING)  
5. 7C-0111 [2] RETAINER-PIN  
6. 168-7226 [1] PIN-PISTON  
7. 2W-9128 [1] ROD AS-CONNECTING  
8. 2W-0027 [1] BEARING  
9. 9N-3832 [2] BOLT-CONNECTING ROD  
10. 9L-7669 [2] NUT-CONNECTING ROD (7/16-20 THD)  
11. 7W-9415 [1] BEARING-CONNECTING ROD (STANDARD)  
  7C-6976 A [1] BEARING (.25MM US)  
  7C-6977 A [1] BEARING (.5MM US)  
12. 115-4083 [1] SKIRT-PISTON  
13. 135-5970 [1] TUBE AS-PISTON COOLING JET  
14. 6V-3940 M [1] BOLT (M8X1.25X25MM)  
  A   NOT PART OF THIS GROUP
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBC13030031
 

7C-5034: PLATE GP-SOUND SUPPRESSION

7C-5034 PLATE GP-SOUND SUPPRESSION
S/N 6JK4931-UP
PART OF 153-7319 ENGINE AR-CORE
i00187682 SEBC1303
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-4648 [1] PLATE-SOUND SUPPRESSION  
2. 6V-3940 M [2] BOLT (M8X1.25X25MM)  
3. 9M-1974 [2] WASHER-HARD (2MM THK)  
4. 6V-3822 M [10] BOLT (M10X1.50X35MM)  
5. 6V-5839 [10] WASHER (2.5MM THK)  
  M   METRIC PART
 

#SEBC13030032
 

156-0228: PLUG GP-ENGINE

156-0228 PLUG GP-ENGINE
S/N 6JK4931-UP
PART OF 153-7318 ENGINE AR
i00953032 SEBC1303
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8008 [2] PLUG-O-RING (1 1/16-12 THD)  
2. 3D-2824 [2] SEAL-O-RING (23.47MM ID)  
3. 9S-8005 [1] PLUG-O-RING (3/4-16 THD)  
4. 3K-0360 [1] SEAL-O-RING (16.36MM ID)  
5. 6F-7062 [1] WASHER (1.83MM THK)  
6. 8T-0293 M [1] BOLT (M12X1.75X20MM)  
  M   METRIC PART
 

#SEBC13030033
 

4W-5429: PULLEY GP-CRANKSHAFT

4W-5429 PULLEY GP-CRANKSHAFT
S/N 6JK4931-UP
148MM (5.83 IN) DIAMETER PULLEY. WATER PUMP
PART OF 153-7318 ENGINE AR
i00187494 SEBC1303
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3773 [1] PULLEY-CRANKSHAFT  
2. 8T-3666 M [4] BOLT  
3. 2W-7381 [1] WASHER-CLAMP  
  M   METRIC PART
 

#SEBC13030034
 

107-7722: ROCKER ARM GP

107-7722 ROCKER ARM GP
S/N 6JK4931-UP
PART OF 4P-4372 MECHANISM GP-FUEL PUMP & VALVE
i00188359 SEBC1303
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-4832 M [2] SCREW-VALVE ADJUSTMENT  
2. 2Y-5829 M [2] NUT (M10X1.5 THD)  
3. 4P-7790 [1] SHAFT AS-ARM  
4. 2D-6642 [1] BALL  
5. 7M-5130 [1] PIN  
6. 7W-4137 [1] SHAFT AS  
7. 0L-1026 [1] PLUG-CUP  
8. 7W-3983 [1] RING-RETAINER  
9. 9Y-1582 [1] BUTTON-ARM  
10. 6I-0924 [2] ROCKER ARM AS  
11. 9Y-4973 [1] SCREW-INJECTION ADJUSTMENT  
12. 7W-4117 M [1] NUT  
13. 105-1776 [1] ARM AS-UNIT INJECTOR  
14. Z [1] BEARING-SLEEVE  
15. Z [1] SOCKET-ARM  
16. 9Y-8534 [1] SUPPORT-SHAFT  
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#SEBC13030035
 

115-4210: SEAL GP-CRANKSHAFT

115-4210 SEAL GP-CRANKSHAFT
S/N 6JK4931-UP
PART OF 153-7319 ENGINE AR-CORE
i00188452 SEBC1303
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-4120 [1] SEAL GP-CRANKSHAFT  
2. 119-2921 [1] SEAL GP-CRANKSHAFT  
3. 4R-9999 [1] EXCLUDER-CRANKSHAFT SEAL  
 

#SEBC13030036
 

7C-1770: SEAL GP-FLYWHEEL HOUSING

7C-1770 SEAL GP-FLYWHEEL HOUSING
S/N 6JK4931-UP
PART OF 153-7318 ENGINE AR
i00187675 SEBC1303
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-8846 B SEALANT  
2. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
3. 3D-2824 B [1] SEAL-O-RING (23.47MM ID)  
  B   USE AS REQUIRED
 

#SEBC13030037
 

139-3527: BREATHER GP

139-3527 BREATHER GP
S/N 6JK4931-UP
PART OF 153-7319 ENGINE AR-CORE
i00190052 SEBC1303
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-9162 [1] BREATHER AS-CRANKCASE  
2. 4L-9564 [1] SEAL-O-RING (81.92MM ID)  
3. 6V-3821 M [1] BOLT (M8X1.25X110MM)  
4. 9N-0869 [1] WASHER (2MM THK)  
5. 6V-5218 M [2] BOLT (M8X1.25X35MM)  
6. 9M-1974 [2] WASHER-HARD (2MM THK)  
7. 4P-9936 [1] BASE  
8. 7C-1159 [1] GASKET  
  M   METRIC PART
 

#SEBC13030038
 

130-7193: FILLER GP-ENGINE OIL

130-7193 FILLER GP-ENGINE OIL
S/N 6JK4931-UP
PART OF 153-7318 ENGINE AR
i00698939 SEBC1303
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5L-2952 [1] CAP AS-OIL FILLER  
  6L-2609 [1] SEAL-RUBBER  
2. 168-7038 [1] TUBE AS  
3. 8T-4908 M [2] BOLT (M8X1.25X25MM)  
4. 8T-4224 [2] WASHER-HARD (2MM THK)  
5. 7C-0358 [1] GASKET  
6. 3E-4352 [1] WASHER-HARD (2.5MM THK)  
7. 6V-2317 M [1] BOLT (M8X1.25X30MM)  
  M   METRIC PART
 

#SEBC13030039
 

1W-8845: FILTER AS-ENGINE OIL

1W-8845 FILTER AS-ENGINE OIL
S/N 6JK4931-UP
PART OF 164-5809 FILTER GP-ENGINE OIL
i00666321 SEBC1303
  For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

Information:

Special Instruction
Installation Instructions for Piston Packs{1225, 1239}
Installation Instructions for Piston Packs{1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Top Piston Ring Changed On Gosselies Built Vehicle Applicaiton Engines
Top Piston Ring Changed On Gosselies Built Vehicle Applicaiton Engines
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3114, 3116, and 3126 Engines
Compression - Test
3114, 3116, and 3126 Engines
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Connecting Rod Bearings - Inspect
3114, 3116, and 3126 Engines
Piston Ring Groove - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine

Caterpillar Parts SIS Catalog 962G :

Truck sale:

 
Caterpillar 962G
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
 
Caterpillar 962G2, Wheel Loaders, Construction

CGT - COMPAGNIA GENERALE TRATTORI
 
Caterpillar 962G2, Wheel Loaders, Construction
- Wheel loaders
CGT - COMPAGNIA GENERALE TRATTORI
96.768 
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.