AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D8R Custom Parts Manual Track Type Tractor 6YZ00001-UP (MACHINE) BASIC ENGINE Caterpillar SIS



TRACK-TYPE TRACTOR D8R II TRACK-TYPE TRACTOR 6YZ
 D8R Custom Parts Manual Track Type Tractor 6YZ00001-UP (MACHINE) SEBC1309 D8R II 6YZ   (2000)

Parts group D8R II:

  For full view, you need register
BASIC ENGINE
DRIVE GP-FAN
DRIVE GP-FAN
162-7976 DRIVE GP-FAN
162-7976 DRIVE GP-FAN -BELT
S/N 6YZ1-UP
PART OF 217-0005 COOLING AR, 183-5439 FAN AR-EJECTOR, 143-7774, 187-2088, 189-0969 RADIATOR AR
AN ATTACHMENT

Information:

(For parts list, see above)

Service Magazine
Repair Guidelines for Air Compressors {1803}
2003/08/25
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Operation and Maintenance Manual
Air Conditioner Belt - Inspect/Adjust/Replace - If Equipped
D8R Series II Track-Type Tractor
Alternator and Fan Belts - Inspect/Adjust/Replace
D8R Series II Track-Type Tractor
Specifications
Belt Tension Chart
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Fan Belt Tightener - Remove
D8R Series II Track-Type Tractor Engine Supplement
Fan Belt Tightener - Install
D8R Series II Track-Type Tractor Engine Supplement
Fan Belt Tightener - Disassemble
D8R Series II Track-Type Tractor Engine Supplement
Fan Belt Tightener - Assemble
D8R Series II Track-Type Tractor Engine Supplement
Specifications
Compression Brake - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Systems Operation
Compression Brake
3406E and 3456 Engines for Caterpillar Built Machines
Testing and Adjusting
Control Valve (Compression Brake) - Test
3406E and 3456 Engines for Caterpillar Built Machines
Solenoid Valve (Compression Brake) - Test
3406E and 3456 Engines for Caterpillar Built Machines
Slave Piston Lash - Adjust
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Compression Brake - Remove - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Install - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Disassemble - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Assemble - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Special Instruction
Procedure to Torque the Camshaft Gear{1210, 1212}
Procedure to Torque the Camshaft Gear{1210, 1212}
Specifications
Camshaft
3406E and 3456 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft - Install
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
New Camshaft Drive Gear Assemblies are Now Available {1212}
2002/06/03
Procedure to Torque the Camshaft Gear {1206, 1210}
2007/02/05
Special Instruction
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Specifications
Connecting Rod Bearing Journal
3406E and 3456 Engines for Caterpillar Built Machines
Main Bearing Journal
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft
3406E and 3456 Engines for Caterpillar Built Machines
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Main Bearings - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
D8R Series II Track-Type Tractor Engine Supplement
Crankshaft Front Seal - Remove and Install
D8R Series II Track-Type Tractor Engine Supplement
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
A New Crankshaft Front Seal Is Now In Production {1160}
2001/11/19
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/12
A New Type of Main Bearing is Available {1202, 1203}
2008/09/29
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Inspection and/or Repair Procedure to Replace Crankshafts on Machine Engines {1202}
2009/10/29
Use Reuse and Salvage Guidelines for Measurements of Crankshafts {1202}
2006/10/09
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1000, 1202}
2008/09/08
Usability of Main Bearings and Connecting Rod Bearings {1202, 1203, 1218, 1219}
2008/12/29
Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Special Instruction
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Technical Information Bulletin
Liner Flange Breakage
Liner Flange Breakage
Specifications
Cylinder Block
3406E and 3456 Engines for Caterpillar Built Machines
Main Bearing Journal
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Liner
3406E and 3456 Engines for Caterpillar Built Machines
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Main Bearings - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Liner - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24
The Cylinder Liners Have a New Appearance {1216}
2005/03/14
Cylinder Head And Spacer Plate Gasket Failures On Certain Machine Engines {1100, 1201}
2015/05/15
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Specifications
Cylinder Head
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Head Valves
3406E and 3456 Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
3406E and 3456 Engines for Caterpillar Built Machines
Troubleshooting
Valve Rotator or Spring Lock Is Free
3176C and 3406E Engines for D7R Series II and D8R Series II Track-Type Tractors
Disassembly and Assembly
Electronic Unit Injector Sleeve - Install
3406E and 3456 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Head - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Head - Install
3406E and 3456 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
3406E and 3456 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Head - Remove - Engine In Chassis
D8R Series II Track-Type Tractor Engine Supplement
Cylinder Head - Install - Engine In Chassis
D8R Series II Track-Type Tractor Engine Supplement
Service Magazine
New Inlet Valve for Cylinder Head Groups in Machine Engines {1105}
2001/08/06
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New Valve Bridge May Need to Be Installed on Certain Engines {1100}
2006/03/20
A New Outer Valve Spring Is Now Used {1100, 1108}
2008/12/01
Cylinder Head And Spacer Plate Gasket Failures On Certain Machine Engines {1100, 1201}
2015/05/15
Specifications
Vibration Damper
3406E and 3456 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
D8R Series II Track-Type Tractor Engine Supplement
Operation and Maintenance Manual
Air Conditioner Belt - Inspect/Adjust/Replace - If Equipped
D8R Series II Track-Type Tractor
Alternator and Fan Belts - Inspect/Adjust/Replace
D8R Series II Track-Type Tractor
Specifications
Mounting Gp-Fan Drive
3406E and 3456 Engines for Caterpillar Built Machines
Troubleshooting
Variable Pitch Engine Fan Circuit - Test
3176C and 3406E Engines for D7R Series II and D8R Series II Track-Type Tractors
Disassembly and Assembly
Fan Drive - Disassemble
3406E and 3456 Engines for Caterpillar Built Machines
Fan Drive - Assemble
3406E and 3456 Engines for Caterpillar Built Machines
Fan Drive - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Fan Drive - Install
3406E and 3456 Engines for Caterpillar Built Machines
Drive Belt - Remove and Install
D8R Series II Track-Type Tractor Engine Supplement
Fan Drive - Assemble
D8R Series II Track-Type Tractor Engine Supplement
Fan Drive - Disassemble
D8R Series II Track-Type Tractor Engine Supplement
Fan Drive - Remove
D8R Series II Track-Type Tractor Engine Supplement
Fan Drive - Install
D8R Series II Track-Type Tractor Engine Supplement
Service Magazine
New Lubricant for the Fan Drive {0645, 1359}
2005/03/21
New Alternator Belts and Pulleys are Now Available for D8R and D8RSeries II {1357, 1359}
2009/09/21
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel
3406E and 3456 Engines for Caterpillar Built Machines
Flywheel Housing
3406E and 3456 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Flywheel - Install
3406E and 3456 Engines for Caterpillar Built Machines
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Special Instruction
Procedure to Torque the Camshaft Gear{1210, 1212}
Procedure to Torque the Camshaft Gear{1210, 1212}
Specifications
Gear Group (Front)
3406E and 3456 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Gear Group (Front) - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Gear Group (Front) - Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
Procedure to Torque the Camshaft Gear {1206, 1210}
2007/02/05
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Specifications
Flywheel Housing
3406E and 3456 Engines for Caterpillar Built Machines
Testing and Adjusting
Flywheel Housing - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
A New Flywheel Housing Assembly Is Used on Certain Machine Engines {1157}
2012/05/18
An Improved Gasket Is Now Used on the Electric Starting Motor of Certain Track Type Tractors {1157, 1453, 7555}
2012/07/23
Specifications
Housing (Front)
3406E and 3456 Engines for Caterpillar Built Machines
Front Housing and Covers
3406E and 3456 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Housing (Front) - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Housing (Front) - Install
3406E and 3456 Engines for Caterpillar Built Machines
Front Cover - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Front Cover - Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
Replacing Lifters for the Unit Injectors {1209, 1290}
2006/06/12
Specifications
Engine Support (Front)
3406E and 3456 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Oil Level - Check
D8R Series II Track-Type Tractor
Engine Oil Sample - Obtain
D8R Series II Track-Type Tractor
Specifications
Engine Oil Pan
3406E and 3456 Engines for Caterpillar Built Machines
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Oil Pan - Remove - Engine In Chassis
D8R Series II Track-Type Tractor Engine Supplement
Oil Pan - Install - Engine In Chassis
D8R Series II Track-Type Tractor Engine Supplement
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
An Improved Three-Piece Oil Pan Gasket is Now Used {1302, 7555}
2007/12/31
3406, 3406C, and 3406E Engine Rebuild Kits for Machines Are Now Available {1000}
2012/06/08
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER PACKS AND PISTON CROWNS ON CERTAIN 3406E POWERED D8R TRACK TYPE TRACTORS, AND D350E II AND D400E II ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER PACKS AND PISTON CROWNS ON CERTAIN 3406E POWERED D8R TRACK TYPE TRACTORS, AND D350E II AND D400E II ARTICULATED TRUCKS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod
3406E and 3456 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
3406E and 3456 Engines for Caterpillar Built Machines
Piston and Rings
3406E and 3456 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER PACKS AND PISTON CROWNS ON CERTAIN 3406E POWERED D8R TRACK TYPE TRACTORS, AND D350E II AND D400E II ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER PACKS AND PISTON CROWNS ON CERTAIN 3406E POWERED D8R TRACK TYPE TRACTORS, AND D350E II AND D400E II ARTICULATED TRUCKS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDER PACKS FOR CERTAIN 3400, 3500, C-15, AND C18 ENGINE APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDER PACKS FOR CERTAIN 3400, 3500, C-15, AND C18 ENGINE APPLICATIONS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER PACKS AND PISTON CROWNS ON CERTAIN 3406E POWERED D8R TRACK TYPE TRACTORS, AND D350E II AND D400E II ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER PACKS AND PISTON CROWNS ON CERTAIN 3406E POWERED D8R TRACK TYPE TRACTORS, AND D350E II AND D400E II ARTICULATED TRUCKS
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3406E and 3456 Engines for Caterpillar Built Machines
Compression - Test
3406E and 3456 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
3406E and 3456 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
3406E and 3456 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
3406E and 3456 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
3406E and 3456 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
A New Piston and Piston Rings Are Now Available {1214, 1215}
2001/08/06
New Piston and Rod Group that Improves Cold Weather Operation {1225}
2003/03/24
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Usability of Main Bearings and Connecting Rod Bearings {1202, 1203, 1218, 1219}
2008/12/29
Operation and Maintenance Manual
Alternator and Fan Belts - Inspect/Adjust/Replace
D8R Series II Track-Type Tractor
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
D8R Series II Track-Type Tractor Engine Supplement
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
Belt Tension Chart
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
Banded V-Belts Are Now Available {1357}
2002/03/04
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Operation and Maintenance Manual
Engine Valve Lash - Check/Adjust
D8R Series II Track-Type Tractor
Engine Valve Rotators - Inspect
D8R Series II Track-Type Tractor
Special Instruction
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Service Letter-NACD
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Electronic Unit Injector Rocker Arm
3406E and 3456 Engines for Caterpillar Built Machines
Valve Mechanism Cover
3406E and 3456 Engines for Caterpillar Built Machines
Valve Mechanism
3406E and 3456 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Service Letter-China
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-APD
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
3406E and 3456 Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
3406E and 3456 Engines for Caterpillar Built Machines
Troubleshooting
Excessive Valve Lash
3176C and 3406E Engines for D7R Series II and D8R Series II Track-Type Tractors
Disassembly and Assembly
Valve Mechanism Cover - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Remove - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Install - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Disassemble - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Assemble - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Rocker Arm - Disassemble
3406E and 3456 Engines for Caterpillar Built Machines
Rocker Arm - Assemble
3406E and 3456 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
3406E and 3456 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Valve Cover - Remove - In-Chassis
D8R Series II Track-Type Tractor Engine Supplement
Valve Cover - Install - In-Chassis
D8R Series II Track-Type Tractor Engine Supplement
Service Magazine
A New Configuration of Valve Springs Is Now In Production {1108}
2001/02/05
New Tools Are Available To Help Find The Top Center Position For No. 1 Piston {1105}
2001/11/19
A New Valve Cover Seal and New Valve Cover Fasteners are Now Available {1107}
2004/04/19
Replacing Lifters for the Unit Injectors {1209, 1290}
2006/06/12
Valve Bridges are Included with Cylinder Heads {1102, 1123}
2010/05/17
A New Guide Spring for the Camshaft Lifter is Now Used {1102, 1121, 1123}
2015/02/12
A New Rocker Arm Assembly is Available {1123}
2008/08/25
A New Rocker Arm Assembly is Available {1123}
2009/02/02
A New Screw Is Available for the Rocker Arm Assemblies of Some Machine Engines {1123}
2011/02/11
Valve Cover Isolation Seals Are Now Used on Certain Machines {1107, 7555}
2012/01/09
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
An Improved Valve Cover Seal Is Used on Certain Machine Engines {1107, 7553, 7555}
2014/07/22
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Special Instruction
Bronze 380-0469 Engine Overhaul Kit for 3406 Machine Engines{1000}
Bronze 380-0469 Engine Overhaul Kit for 3406 Machine Engines{1000}
Silver 380-1594 Engine Overhaul Kits for 3406 Machine Engines{1000}
Silver 380-1594 Engine Overhaul Kits for 3406 Machine Engines{1000}
Information Release Memo
Engine Overhaul Kits for 3406, 3406C and 3406E Machine Engines
Engine Overhaul Kits for 3406, 3406C and 3406E Machine Engines
Service Magazine
3406, 3406C, and 3406E Engine Rebuild Kits for Machines Are Now Available {1000}
2012/06/08

Truck sale:

Caterpillar D8R II
 
Caterpillar D8R II
- Crawler dozers
FINNING CANADA
 
510.000 
Caterpillar D8R II, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung
165.000 
Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung
125.000 
Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung
165.000 
Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.