AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D8R Custom Parts Manual Track Type Tractor 6YZ00001-UP (MACHINE) HYDRAULIC SYSTEM Caterpillar SIS



TRACK-TYPE TRACTOR D8R II TRACK-TYPE TRACTOR 6YZ
 D8R Custom Parts Manual Track Type Tractor 6YZ00001-UP (MACHINE) SEBC1309 D8R II 6YZ   (2000)

Parts group D8R II:

  For full view, you need register
HYDRAULIC SYSTEM
ACCUMULATOR GP
ACCUMULATOR GP-PILOT OIL
179-9387 ACCUMULATOR GP-PILOT OIL
179-9387 ACCUMULATOR GP-PILOT OIL -UNCHARGED
S/N 6YZ1-UP
FIELD REPLACEMENT FOR @@@@@200-0750@@@@@
ACCUMULATOR GP-PILOT OIL
200-0750 ACCUMULATOR GP-PILOT OIL
200-0750 ACCUMULATOR GP-PILOT OIL -CHARGED
S/N 6YZ1-UP
PART OF 215-4185 LINES GP-PILOT
FIELD REPLACEMENT ORDER @@@@@179-9387@@@@@
AN ATTACHMENT
CONTROL AR-DUAL TILT
143-7741 CONTROL AR-DUAL TILT
143-7741 CONTROL AR-DUAL TILT -BULLDOZER
S/N 6YZ1-UP
AN ATTACHMENT
CYLINDER GP
204-5699 CYLINDER AR-DUAL TILT
204-5699 CYLINDER AR-DUAL TILT -SEMI-UNIVERSAL BULLDOZER
S/N 6YZ1-UP
FOR USE WITH @@@@@ 4Z-0604@@@@@, @@@@@143-7741@@@@@
AN ATTACHMENT
CYLINDER GP-BULLDOZER LIFT
4Z-6241 CYLINDER GP-BULLDOZER LIFT
4Z-6241 CYLINDER GP-BULLDOZER LIFT
S/N 6YZ1-UP
114-MM (5-IN) BORE X 1044-MM (41-IN) STROKE. SCRAP RAKE
AN ATTACHMENT
CYLINDER GP-TILT
6E-1175 CYLINDER GP-TILT
6E-1175 CYLINDER GP-TILT -BULLDOZER
S/N KMB1-UP; CFZ1-UP
184.15MM (7.25 IN) BORE X 195MM (7.7 IN) STROKE
PART OF 216-8304, 4Z-9384 PUSH ARM GP-STABILIZER
AN ATTACHMENT
CYLINDER GP-TILT
162-0662 CYLINDER GP-TILT
162-0662 CYLINDER GP-TILT -RH
S/N 6YZ1-UP
184.15MM (7.25 IN) BORE X 140MM (5.5 IN) STROKE
PART OF 204-5699 CYLINDER AR-DUAL TILT
AN ATTACHMENT
CYLINDER GP-TILT
162-0663 CYLINDER GP-TILT
162-0663 CYLINDER GP-TILT -LH
S/N 6YZ1-UP
184.15MM (7.25 IN) BORE X 140MM (5.5 IN) STROKE
PART OF 204-5699 CYLINDER AR-DUAL TILT
AN ATTACHMENT
HYDRAULIC GP
215-4182 HYDRAULIC AR
215-4182 HYDRAULIC AR -3-VALVE, REAR
S/N 6YZ1-UP
WITH STRIKER BAR BOX
FOR USE WITH @@@@@188-2526@@@@@
CANNOT BE USED WITH @@@@@188-2524@@@@@, 158-6528 WINCH AR, 159-8104 COUNTERWEIGHT GP, 159-8105 DRAWBAR GP, 160-1806 CONTROL AR-HYDRAULIC, 160-5556 CONTROL AR-HYDRAULIC
AN ATTACHMENT
LINES GP-CYLINDER
LINES GP-TILT CYLINDER
4Z-9210 LINES GP-TILT CYLINDER
4Z-9210 LINES GP-TILT CYLINDER
S/N CFZ1-UP
PART OF 4Z-0604 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
119-5125 LINES GP-TILT CYLINDER
119-5125 LINES GP-TILT CYLINDER
S/N 6YZ1-1026
LANDFILL-BULLDOZER WITH HOSE GUARDS
PART OF 143-7722 WASTE HANDLING AR
AN ATTACHMENT
LINES GP-TILT CYLINDER
143-7743 LINES GP-TILT CYLINDER
143-7743 LINES GP-TILT CYLINDER -DUAL
S/N 6YZ1-UP
PART OF 143-7741 CONTROL AR-DUAL TILT
AN ATTACHMENT
LINES GP-TILT CYLINDER
183-5405 LINES GP-TILT CYLINDER
183-5405 LINES GP-TILT CYLINDER -DUAL
S/N 6YZ1-1621
LANDFILL-BULLDOZER WITH HOSE GUARDS
PART OF 143-7741 CONTROL AR-DUAL TILT
AN ATTACHMENT
LINES GP-TILT CYLINDER
183-5405 LINES GP-TILT CYLINDER
183-5405 LINES GP-TILT CYLINDER -DUAL
S/N 6YZ1622-UP
LANDFILL-BULLDOZER WITH HOSE GUARDS
PART OF 143-7741 CONTROL AR-DUAL TILT
AN ATTACHMENT
LINES GP-TILT CYLINDER
204-5149 LINES GP-TILT CYLINDER
204-5149 LINES GP-TILT CYLINDER -DUAL
S/N 6YZ1-1621
PART OF 204-5699 CYLINDER AR-DUAL TILT
AN ATTACHMENT
LINES GP-TILT CYLINDER
204-5149 LINES GP-TILT CYLINDER
204-5149 LINES GP-TILT CYLINDER -DUAL
S/N 6YZ1622-UP
PART OF 204-5699 CYLINDER AR-DUAL TILT
AN ATTACHMENT
LINES GP-TILT CYLINDER
216-8305 LINES GP-TILT CYLINDER
216-8305 LINES GP-TILT CYLINDER
S/N KMB1-UP
PART OF 216-8306 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
224-3899 LINES GP-TILT CYLINDER
224-3899 LINES GP-TILT CYLINDER -LANDFILL-BULLDOZER W/HOSE GUARDS
S/N 6YZ1027-UP
PART OF 143-7722 WASTE HANDLING AR
AN ATTACHMENT
LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
215-4184 LINES GP-HYDRAULIC
215-4184 LINES GP-HYDRAULIC
S/N 6YZ1-UP
PART OF 215-4182 HYDRAULIC AR
AN ATTACHMENT
LINES GP-PILOT
LINES GP-PILOT
215-4185 LINES GP-PILOT
215-4185 LINES GP-PILOT
S/N 6YZ1-UP
BULLDOZER, REAR HYDRAULICS
PART OF 215-4182 HYDRAULIC AR
AN ATTACHMENT
MANIFOLD GP
MANIFOLD GP-VALVE
163-0829 MANIFOLD GP-VALVE
163-0829 MANIFOLD GP-VALVE
S/N 6YZ1-UP
PART OF 160-5951 VALVE GP-BANK 4
AN ATTACHMENT
MOUNTING GP
MOUNTING GP-CONTROL VALVE
163-3436 MOUNTING GP-CONTROL VALVE
163-3436 MOUNTING GP-CONTROL VALVE
S/N 6YZ1-UP
PART OF 215-4182 HYDRAULIC AR
AN ATTACHMENT
VALVE GP-BANK
VALVE GP-BANK 4
160-5951 VALVE GP-BANK 4
160-5951 VALVE GP-BANK 4 -BULLDOZER, RIPPER
S/N 6YZ1-UP
PART OF 215-4182 HYDRAULIC AR
AN ATTACHMENT
VALVE GP-CHECK
VALVE GP-CHECK
4T-5896 VALVE GP-CHECK
4T-5896 VALVE GP-CHECK -MANIFOLD INLET
S/N 6YZ1-UP
PART OF 163-0829 MANIFOLD GP-VALVE
AN ATTACHMENT
VALVE GP-CHECK
158-9956 VALVE GP-CHECK
158-9956 VALVE GP-CHECK -PILOT OIL
S/N 6YZ1-UP
PART OF 162-0162 VALVE GP-MANIFOLD & REDUCING
AN ATTACHMENT
VALVE GP-CONTROL
MOUNTING GP-CONTROL VALVE
163-3436 MOUNTING GP-CONTROL VALVE
163-3436 MOUNTING GP-CONTROL VALVE
S/N 6YZ1-UP
PART OF 215-4182 HYDRAULIC AR
AN ATTACHMENT
VALVE GP-BANK 4
160-5951 VALVE GP-BANK 4
160-5951 VALVE GP-BANK 4 -BULLDOZER, RIPPER
S/N 6YZ1-UP
PART OF 215-4182 HYDRAULIC AR
AN ATTACHMENT
VALVE GP-CONTROL
160-5953 VALVE GP-CONTROL
160-5953 VALVE GP-CONTROL -BULLDOZER LIFT
S/N 6YZ1-UP
PART OF 160-5951 VALVE GP-BANK 4
AN ATTACHMENT
VALVE GP-CONTROL
160-5954 VALVE GP-CONTROL
160-5954 VALVE GP-CONTROL -BULLDOZER TILT
S/N 6YZ1-UP
PART OF 160-5951 VALVE GP-BANK 4
AN ATTACHMENT
VALVE GP-CONTROL
169-3323 VALVE GP-CONTROL
169-3323 VALVE GP-CONTROL -RIPPER LIFT, TILT
S/N 6YZ1-UP
PART OF 160-5951 VALVE GP-BANK 4
AN ATTACHMENT
VALVE GP-TILT CONTROL
106-9648 VALVE GP-TILT CONTROL
106-9648 VALVE GP-TILT CONTROL -DUAL
S/N 6YZ1-2031
PART OF 143-7741 CONTROL AR-DUAL TILT
AN ATTACHMENT
VALVE GP-TILT CONTROL
225-2321 VALVE GP-TILT CONTROL
225-2321 VALVE GP-TILT CONTROL -DUAL
S/N 6YZ1-UP
PART OF 143-7741 CONTROL AR-DUAL TILT
AN ATTACHMENT
VALVE GP-DIVERTER
VALVE GP-DIVERTER
180-8569 VALVE GP-DIVERTER
180-8569 VALVE GP-DIVERTER -IMPLEMENT PILOT OIL
S/N 6YZ1-UP
PART OF 215-4184 LINES GP-HYDRAULIC
AN ATTACHMENT
VALVE GP-MANIFOLD & REDUCING
VALVE GP-MANIFOLD & REDUCING
162-0162 VALVE GP-MANIFOLD & REDUCING
162-0162 VALVE GP-MANIFOLD & REDUCING -IMPLEMENT PILOT LINES
S/N 6YZ1-UP
PART OF 215-4185 LINES GP-PILOT
Type 1
AN ATTACHMENT
VALVE GP-MANIFOLD & REDUCING
162-0162 VALVE GP-MANIFOLD & REDUCING
162-0162 VALVE GP-MANIFOLD & REDUCING -IMPLEMENT PILOT LINES
S/N 6YZ1-UP
PART OF 215-4185 LINES GP-PILOT
Type 2
AN ATTACHMENT
VALVE GP-PILOT
VALVE GP-PILOT
199-4275 VALVE GP-PILOT
199-4275 VALVE GP-PILOT -IMPLEMENT, REAR
S/N 6YZ1-UP
PART OF 215-4182 HYDRAULIC AR
AN ATTACHMENT
VALVE GP-PILOT
200-0188 VALVE GP-PILOT
200-0188 VALVE GP-PILOT -BULLDOZER, DUAL TILT
S/N 6YZ1-UP
PART OF 143-7741 CONTROL AR-DUAL TILT
AN ATTACHMENT
VALVE GP-PILOT
200-0189 VALVE GP-PILOT
200-0189 VALVE GP-PILOT -BULLDOZER CONTROL
S/N 6YZ1-UP
PART OF 215-4182 HYDRAULIC AR
AN ATTACHMENT
VALVE GP-PILOT CARTRIDGE
194-5032 VALVE GP-PILOT CARTRIDGE
194-5032 VALVE GP-PILOT CARTRIDGE -BULLDOZER LIFT, LOWER
S/N 6YZ1-UP
PART OF 200-0188, 200-0189 VALVE GP-PILOT
AN ATTACHMENT
VALVE GP-PILOT CARTRIDGE
194-5033 VALVE GP-PILOT CARTRIDGE
194-5033 VALVE GP-PILOT CARTRIDGE -IMPLEMENT
S/N 6YZ1-UP
PART OF 199-4275, 200-0188, 200-0189 VALVE GP-PILOT
AN ATTACHMENT
VALVE GP-PRESSURE REDUCING
VALVE GP-PRESSURE REDUCING
170-3357 VALVE GP-PRESSURE REDUCING
170-3357 VALVE GP-PRESSURE REDUCING -PILOT OIL
S/N 6YZ1-UP
PART OF 162-0162 VALVE GP-MANIFOLD & REDUCING
AN ATTACHMENT
VALVE GP-RELIEF
VALVE GP-RELIEF
4T-4935 VALVE GP-RELIEF
4T-4935 VALVE GP-RELIEF -MAIN
S/N 6YZ1-UP
PART OF 163-0829 MANIFOLD GP-VALVE
AN ATTACHMENT
VALVE GP-RELIEF
104-7574 VALVE GP-RELIEF
104-7574 VALVE GP-RELIEF -CHARGE
S/N 6YZ1-UP
PART OF 163-0829 MANIFOLD GP-VALVE
AN ATTACHMENT
VALVE GP-RELIEF
170-3360 VALVE GP-RELIEF
170-3360 VALVE GP-RELIEF -PILOT OIL
S/N 6YZ1-UP
PART OF 162-0162 VALVE GP-MANIFOLD & REDUCING
AN ATTACHMENT
VALVE GP-RELIEF
225-8026 VALVE GP-RELIEF
225-8026 VALVE GP-RELIEF -PILOT OIL
S/N 6YZ1-UP
DIRECT OPERATED
PART OF 162-0162 VALVE GP-MANIFOLD & REDUCING
AN ATTACHMENT
VALVE GP-RELIEF
346-3797 VALVE GP-RELIEF
346-3797 VALVE GP-RELIEF
S/N 6YZ1-UP
PART OF 4T-4935 VALVE GP-RELIEF
AN ATTACHMENT
VALVE GP-SHUTTLE
VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE
S/N 6YZ1-UP
PART OF 160-5953, 160-5954, 169-3323 VALVE GP-CONTROL
AN ATTACHMENT
VALVE GP-SOLENOID
VALVE GP-SOLENOID
3E-9205 VALVE GP-SOLENOID
3E-9205 VALVE GP-SOLENOID
S/N 6YZ1-UP
24-VOLT
PART OF 143-7770, 215-7624, 216-9990, 216-9995, 231-3291 FAN AR-VARIABLE, 106-9648, 225-2321 VALVE GP-TILT CONTROL
AN ATTACHMENT
VALVE GP-SOLENOID
152-8345 VALVE GP-SOLENOID
152-8345 VALVE GP-SOLENOID
S/N 6YZ1-UP
24-VOLT
PART OF 180-8569 VALVE GP-DIVERTER
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Specifications
Accumulator
D8R Series II Track-Type Tractor Hydraulic System
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Systems Operation
Accumulator
D8R Series II Track-Type Tractor Hydraulic System
Testing and Adjusting
Accumulator (Pilot) - Test and Charge
D8R Series II Track-Type Tractor Hydraulic System
Disassembly and Assembly
Accumulator (Implement) - Remove and Install
D8R Series II Track-Type Tractor Machine Systems
Service Magazine
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Systems Operation
Hydraulic Oil Cooler
D8R Series II Track-Type Tractor Hydraulic System
Disassembly and Assembly
Hydraulic Oil Cooler - Remove and Install
D8R Series II Track-Type Tractor Engine Supplement
Hydraulic Oil Cooler Bypass Valve - Remove and Install
D8R Series II Track-Type Tractor Engine Supplement
Service Magazine
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Operation and Maintenance Manual
Lift Cylinder Yoke Bearings - Lubricate
D8R Series II Track-Type Tractor
Special Instruction
Installation of Modified 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders on D8R LGP Tractors{6053, 6078}
Installation of Modified 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders on D8R LGP Tractors{6053, 6078}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Rework of the Stabilizer Link and Tilt Cylinder Lines{5057, 5104}
Rework of the Stabilizer Link and Tilt Cylinder Lines{5057, 5104}
Repair Procedure for the Bracket for the Blade Tilt Cylinder.{5104, 6060, 6078}
Repair Procedure for the Bracket for the Blade Tilt Cylinder.{5104, 6060, 6078}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE BYPASS VALVE IN THE PISTON ASSEMBLY ON CERTAIN D6R, D7R, D8R AND D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE BYPASS VALVE IN THE PISTON ASSEMBLY ON CERTAIN D6R, D7R, D8R AND D9R TRACK TYPE TRACTORS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
Service Letter-CFEL
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE BYPASS VALVE IN THE PISTON ASSEMBLY ON CERTAIN D6R, D7R, D8R AND D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE BYPASS VALVE IN THE PISTON ASSEMBLY ON CERTAIN D6R, D7R, D8R AND D9R TRACK TYPE TRACTORS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE BYPASS VALVE IN THE PISTON ASSEMBLY ON CERTAIN D6R, D7R, D8R AND D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE BYPASS VALVE IN THE PISTON ASSEMBLY ON CERTAIN D6R, D7R, D8R AND D9R TRACK TYPE TRACTORS
Technical Information Bulletin
D6R-D9R Lift Cylinder Pistons May Have Defective Bypass Valves
D6R-D9R Lift Cylinder Pistons May Have Defective Bypass Valves
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Weld Flash on Ripper Tilt Cylinders Is Acceptable{5356, 6310, 7562}
Weld Flash on Ripper Tilt Cylinders Is Acceptable{5356, 6310, 7562}
Buffer Seal Assembly in the Tilt Cylinder Group Is Installed Backward on Certain Track-Type Tractors{5104}
Buffer Seal Assembly in the Tilt Cylinder Group Is Installed Backward on Certain Track-Type Tractors{5104}
Specifications
Bulldozer Lift Cylinder
D8R Series II Track-Type Tractor Hydraulic System
Bulldozer Tilt Cylinder
D8R Series II Track-Type Tractor Hydraulic System
Bulldozer Dual Tilt Cylinder
D8R Series II Track-Type Tractor Hydraulic System
Ripper Lift Cylinder
D8R Series II Track-Type Tractor Hydraulic System
Ripper Tip Cylinder
D8R Series II Track-Type Tractor Hydraulic System
Pin Puller Cylinder
D8R Series II Track-Type Tractor Hydraulic System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}
Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC CYLINDER WIPER SEALS ON CERTAIN 938G, 950G, 962G, 966G, 972G, 980G WHEEL LOADERS AND D6R, D7R AND D8R TRACK TYPE TRACTORS
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Ripper Tilt Cylinder - Remove and Install
D8R Series II Track-Type Tractor Machine Systems
Ripper Lift Cylinder - Remove and Install
D8R Series II Track-Type Tractor Machine Systems
Ripper Pin Puller Cylinder - Remove and Install
D8R Series II Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder - Assemble
D8R Series II Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder - Disassemble
D8R Series II Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder - Install
D8R Series II Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder - Remove
D8R Series II Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder Mounts - Remove and Install
D8R Series II Track-Type Tractor Machine Systems
Bulldozer Tilt Cylinder - Install
D8R Series II Track-Type Tractor Machine Systems
Bulldozer Tilt Cylinder - Remove
D8R Series II Track-Type Tractor Machine Systems
Service Magazine
New Hoses For The Pin Puller Cylinder Are Now Used {5354}
2001/11/05
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
A Special Instruction, REHS1713, "Rework of the Stabilizer Link and Tilt Cylinder Lines" Is Available {5057, 5104}
2004/02/16
Improved Rod Seals for the Lift Cylinder Are Now Available {5102}
2008/12/15
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Lift Cylinders with Improved Piston Bolt Retention are Now Used on Certain D8T/R and D9T/R Track-Type Tractors {5102, 5102}
Lift Cylinders with Improved Piston Bolt Retention are Now Used on Certain D8T/R and D9T/R Track-Type Tractors {5102, 5102}
An Improved O-Ring Seal Is Now Used On Certain D8 Track-Type Tractor Angle Blade Tilt Cylinders {5104}
An Improved O-Ring Seal Is Now Used On Certain D8 Track-Type Tractor Angle Blade Tilt Cylinders {5104}
New Blade Single Tilt Cylinder Group Is Now Used on Certain Track-Type Tractors {5104}
New Blade Single Tilt Cylinder Group Is Now Used on Certain Track-Type Tractors {5104}
Operation and Maintenance Manual
Hydraulic System Oil Filters - Replace
D8R Series II Track-Type Tractor
Oil Filter - Inspect
D8R Series II Track-Type Tractor
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Specifications
Hydraulic System Oil Filter
D8R Series II Track-Type Tractor Hydraulic System
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Special Instruction
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
New Protective Caps For Hose Clamps Are Now Available {5057}
2001/11/19
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Rework of the Stabilizer Link and Tilt Cylinder Lines{5057, 5104}
Rework of the Stabilizer Link and Tilt Cylinder Lines{5057, 5104}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR MODIFYING THE TILT CYLINDER LINES AND ADJUSTING THE ALIGNMENT OF THE STABILIZER LINK ON CERTAIN D8R TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR MODIFYING THE TILT CYLINDER LINES AND ADJUSTING THE ALIGNMENT OF THE STABILIZER LINK ON CERTAIN D8R TRACK-TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
A Special Instruction, REHS1713, "Rework of the Stabilizer Link and Tilt Cylinder Lines" Is Available {5057, 5104}
2004/02/16
A Improved Manifold for the Tilt Lines is Available {5057, 5104}
2004/05/24
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Accumulator
D8R Series II Track-Type Tractor Hydraulic System
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Testing and Adjusting
Accumulator (Pilot) - Test and Charge
D8R Series II Track-Type Tractor Hydraulic System
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications
Steering Motor
D8R Series II Track-Type Tractor Hydraulic System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Hydraulic Piston Motors{5058}
Hydraulic Piston Motors{5058}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Steering Motor - Adjust
D8R Series II Track-Type Tractor Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}
Thermal Spray Procedures for TTT Dozer Yokes {0599, 0679, 7562}
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED IMPLEMENT PUMP ON CERTAIN D5H, D6H, D6M, D9R, D8N, D8R TRACK-TYPE TRACTORS, 24H MOTOR GRADERS, 5130B MINING EXCAVATORS, 854G WHEEL DOZERS, AND 992G WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED IMPLEMENT PUMP ON CERTAIN D5H, D6H, D6M, D9R, D8N, D8R TRACK-TYPE TRACTORS, 24H MOTOR GRADERS, 5130B MINING EXCAVATORS, 854G WHEEL DOZERS, AND 992G WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Hydraulic Piston Pump Failures May Occur on Certain Motor Graders, Off-Highway Trucks, Track-Type Skidders, Track-Type Tractors, and Wheel Skidders{4306, 5070}
Hydraulic Piston Pump Failures May Occur on Certain Motor Graders, Off-Highway Trucks, Track-Type Skidders, Track-Type Tractors, and Wheel Skidders{4306, 5070}
Specifications
Implement Hydraulic Pump
D8R Series II Track-Type Tractor Hydraulic System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED IMPLEMENT PUMP ON CERTAIN D5H, D6H, D6M, D9R, D8N, D8R TRACK-TYPE TRACTORS, 24H MOTOR GRADERS, 5130B MINING EXCAVATORS, 854G WHEEL DOZERS, AND 992G WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED IMPLEMENT PUMP ON CERTAIN D5H, D6H, D6M, D9R, D8N, D8R TRACK-TYPE TRACTORS, 24H MOTOR GRADERS, 5130B MINING EXCAVATORS, 854G WHEEL DOZERS, AND 992G WHEEL LOADERS
Service Letter-Asia
Systems Operation
Hydraulic Pump - Piston
D8R Series II Track-Type Tractor Hydraulic System
Signal Resolver Network
D8R Series II Track-Type Tractor Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED IMPLEMENT PUMP ON CERTAIN D5H, D6H, D6M, D9R, D8N, D8R TRACK-TYPE TRACTORS, 24H MOTOR GRADERS, 5130B MINING EXCAVATORS, 854G WHEEL DOZERS, AND 992G WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED IMPLEMENT PUMP ON CERTAIN D5H, D6H, D6M, D9R, D8N, D8R TRACK-TYPE TRACTORS, 24H MOTOR GRADERS, 5130B MINING EXCAVATORS, 854G WHEEL DOZERS, AND 992G WHEEL LOADERS
Bench Test Procedures
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Disassembly and Assembly
Implement Pump - Remove
D8R Series II Track-Type Tractor Machine Systems
Implement Pump - Install
D8R Series II Track-Type Tractor Machine Systems
Implement Pump - Disassemble
D8R Series II Track-Type Tractor Machine Systems
Implement Pump - Assemble
D8R Series II Track-Type Tractor Machine Systems
Service Magazine
The Swashplate Stop for the Piston Pump is now Retained with a Dowel Pin {5070}
2000/08/14
Special Instruction, REHS1515 , "Bench Test Procedure for Bosch Rexroth A4VG HD1 and HDD1 Pumps" is Available {5070}
2003/06/16
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
A New Service Tool for Installing the Service Sleeve Bearings in Hydraulic Gear Pumps Is Now Available for Certain CAT Machines {0738, 5073, 5073, 7551}
2013/10/31
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/01/27
Systems Operation
Signal Resolver Network
D8R Series II Track-Type Tractor Hydraulic System
Reuse And Salvage Guidelines
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Operation and Maintenance Manual
Hydraulic System Oil Level - Check
D8R Series II Track-Type Tractor
Hydraulic System Oil Sample - Obtain
D8R Series II Track-Type Tractor
Specifications
Hydraulic Tank and Filter
D8R Series II Track-Type Tractor Hydraulic System
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Systems Operation
Hydraulic Tank and Filter
D8R Series II Track-Type Tractor Hydraulic System
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for (D7- D11) Track-Type Tractor Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for (D7- D11) Track-Type Tractor Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Disassembly and Assembly
Hydraulic Tank - Remove
D8R Series II Track-Type Tractor Machine Systems
Hydraulic Tank - Install
D8R Series II Track-Type Tractor Machine Systems
Hydraulic Tank - Disassemble
D8R Series II Track-Type Tractor Machine Systems
Hydraulic Tank - Assemble
D8R Series II Track-Type Tractor Machine Systems
Service Magazine
A New Sight Gauge With International Symbols Is Now Used on Hydraulic Tanks {5056, 7450}
2002/02/11
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
A Hydraulic Tank with Improved Mounting Brackets is now Used {5056}
2007/07/16
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for (D7- D11) Track-Type Tractor Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for (D7- D11) Track-Type Tractor Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Service Magazine
New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
A New Service Tool for Installing the Service Sleeve Bearings in Hydraulic Gear Pumps Is Now Available for Certain CAT Machines {0738, 5073, 5073, 7551}
2013/10/31
Systems Operation
Charging Valve
D8R Series II Track-Type Tractor Hydraulic System
Hydraulic Tank and Filter
D8R Series II Track-Type Tractor Hydraulic System
Testing and Adjusting
Pressure Reducing Valve - Test and Adjust
D8R Series II Track-Type Tractor Hydraulic System
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Systems Operation
Bypass Valve
D8R Series II Track-Type Tractor Hydraulic System
Specifications
Check Valve
D8R Series II Track-Type Tractor Hydraulic System
Technical Information Bulletin
New Torque Specification for the Orifice Plug in the Implement Control Valve{5051}
New Torque Specification for the Orifice Plug in the Implement Control Valve{5051}
Specifications
Charging Valve
D8R Series II Track-Type Tractor Hydraulic System
Bulldozer Tilt Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Bulldozer Lift Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Pilot Control Valve - Bulldozer Lift and Tilt
D8R Series II Track-Type Tractor Hydraulic System
Pilot Control Valve - Ripper Lift and Tip
D8R Series II Track-Type Tractor Hydraulic System
Implement Control Valve - Machines With a Ripper
D8R Series II Track-Type Tractor Hydraulic System
Implement Control Valve - Machines With a Winch
D8R Series II Track-Type Tractor Hydraulic System
Winch Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Ripper Lift Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Ripper Tip Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Steering Pilot Valve
D8R Series II Track-Type Tractor Hydraulic System
Pilot Control Valve - Winch
D8R Series II Track-Type Tractor Hydraulic System
Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Bulldozer Lift Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Bulldozer Tilt Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Dual Tilt Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Implement Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Ripper Lift Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Ripper Tip Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Winch Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Signal Resolver Network
D8R Series II Track-Type Tractor Hydraulic System
Testing and Adjusting
Accumulator (Pilot) - Test and Charge
D8R Series II Track-Type Tractor Hydraulic System
Disassembly and Assembly
Hydraulic Control Valve - Install
D8R Series II Track-Type Tractor Machine Systems
Hydraulic Control Valve - Remove
D8R Series II Track-Type Tractor Machine Systems
Hydraulic Control Valve - Disassemble
D8R Series II Track-Type Tractor Machine Systems
Hydraulic Control Valve - Assemble
D8R Series II Track-Type Tractor Machine Systems
Service Magazine
A New Pin Puller Control Valve Is Available {5051}
2001/05/28
An Improved Accumulator Spring Assembly is Now Used in the Valves for the Electronic Brake (EB) and the Electronic Clutch/Brake (ECB) {5051}
2001/10/08
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Disassembly and Assembly
Hydraulic Oil Cooler Bypass Valve - Remove and Install
D8R Series II Track-Type Tractor Engine Supplement
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Specifications
Implement Control Valve - Machines With a Ripper
D8R Series II Track-Type Tractor Hydraulic System
Implement Control Valve - Machines With a Winch
D8R Series II Track-Type Tractor Hydraulic System
Ripper Lift Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Service Magazine
New Torque Specifications for the Orifice Plug in the Implement Control Valve {5051}
2007/05/14
Systems Operation
Ripper Lift Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Service Magazine
An Improved Plug is Now Used in the Manifold for the Pressure Reducing Valve {3206, 5117}
2004/05/24
Technical Information Bulletin
REWORK ON THE DETENT PLATE AND THE DETENT ASSEMBLY
REWORK ON THE DETENT PLATE AND THE DETENT ASSEMBLY
Specifications
Pilot Control Valve - Bulldozer Lift and Tilt
D8R Series II Track-Type Tractor Hydraulic System
Pilot Control Valve - Ripper Lift and Tip
D8R Series II Track-Type Tractor Hydraulic System
Steering Pilot Valve
D8R Series II Track-Type Tractor Hydraulic System
Pilot Control Valve - Winch
D8R Series II Track-Type Tractor Hydraulic System
Systems Operation
Pressure Reducing Valve
D8R Series II Track-Type Tractor Hydraulic System
Testing and Adjusting
Pilot Control Valve - Test and Adjust
D8R Series II Track-Type Tractor Hydraulic System
Disassembly and Assembly
Pilot Valve (Steering) - Disassemble
D8R Series II Track-Type Tractor Machine Systems
Pilot Valve (Steering) - Assemble
D8R Series II Track-Type Tractor Machine Systems
Service Magazine
A New Boot Eliminates Sticking of the Pilot Valve {5059}
2003/05/05
An Improved Pilot Cartridge Valve Is Available for the Implement Pilot Valves {5059}
2005/11/28
Specifications
Pressure Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Systems Operation
Pressure Control Valve
D8R Series II Track-Type Tractor Hydraulic System
Disassembly and Assembly
Pressure Control Valve (Steering) - Remove
D8R Series II Track-Type Tractor Machine Systems
Pressure Control Valve (Steering) - Disassemble
D8R Series II Track-Type Tractor Machine Systems
Pressure Control Valve (Steering) - Assemble
D8R Series II Track-Type Tractor Machine Systems
Pressure Control Valve (Steering) - Install
D8R Series II Track-Type Tractor Machine Systems
Service Magazine
Correction to Systems Operation , "Pressure Control Valve" {3073, 3074}
2003/07/28
Specifications
Pressure Reducing Valve (Pilot)
D8R Series II Track-Type Tractor Hydraulic System
Systems Operation
Pressure Reducing Valve
D8R Series II Track-Type Tractor Hydraulic System
Testing and Adjusting
Pressure Reducing Valve - Test and Adjust
D8R Series II Track-Type Tractor Hydraulic System
Service Magazine
Seals in the Pressure Reducing Valve Have Been Improved {5117}
2002/08/19
An Improved Plug is Now Used in the Manifold for the Pressure Reducing Valve {3206, 5117}
2004/05/24
Specifications
Quick-Drop Valve
D8R Series II Track-Type Tractor Hydraulic System
Systems Operation
Quick-Drop Valve
D8R Series II Track-Type Tractor Hydraulic System
Disassembly and Assembly
Quick-Drop Valve - Remove
D8R Series II Track-Type Tractor Machine Systems
Quick-Drop Valve - Disassemble
D8R Series II Track-Type Tractor Machine Systems
Quick-Drop Valve - Install
D8R Series II Track-Type Tractor Machine Systems
Quick-Drop Valve - Assemble
D8R Series II Track-Type Tractor Machine Systems
Service Magazine
A New Orifice Sleeve In the Quick-Drop Valve Provides Better Control of the Blade Lower Operation {5110}
2004/05/17
Specifications
Main Relief Valve
D8R Series II Track-Type Tractor Hydraulic System
Tool Operating Manual
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Systems Operation
Main Relief Valve
D8R Series II Track-Type Tractor Hydraulic System
Operation and Maintenance Manual
Implement Shutoff Control
D8R Series II Track-Type Tractor
Service Magazine
The Reliability of the Shuttle Valve Has Been Improved {4289, 5079}
2005/06/13
Troubleshooting
MID 113 - CID 1933 - FMI 03
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System
MID 113 - CID 1933 - FMI 05
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System
MID 113 - CID 1933 - FMI 06
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System
MID 113 - CID 1934 - FMI 03
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System
MID 113 - CID 1934 - FMI 05
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System
MID 113 - CID 1934 - FMI 06
561N, 572R Series II and 572R Pipelayers and D10R, D11R, D5M, D5N, D6M, D6N, D6R, D6R Series II, D7R, D7R Series II and D8R Series II Track-Type Tractors Power Train Electronic Control System
Service Magazine
A New Coil Assembly is Now Used {5479}
2009/02/09

Truck sale:

Caterpillar D8R II
 
Caterpillar D8R II
- Crawler dozers
FINNING CANADA
 
510.000 
Caterpillar D8R II, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung
165.000 
Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung
125.000 
Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung
165.000 
Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.