102-4373 COLD WEATHER AR S/N 6YZ1-UP MINUS 35 DEGREES C (MINUS 95 DEGREES F) CANNOT BE USED WITH NON-SUSPENDED UNDERCARRIAGE AN ATTACHMENT D8R II

MACHINE ARRANGEMENT

MACHINE AR

1. 102-4373 COLD WEATH
2. 143-7740 MODIFICATI
3. 143-7740 MODIFICATI
4. 143-7740 MODIFICATI
5. 143-7740 MODIFICATI
6. 143-7740 MODIFICATI
7. 143-7721 WASTE HAND
8. 143-7722 WASTE HAND
9. 143-7722 WASTE HAND
0. INFORMATION

TRACK-TYPE TRACTOR D8R II TRACK-TYPE TRACTOR 6YZ
D8R Custom Parts Manual Track Type Tractor 6YZ00001-UP (MACHINE) SEBC1309 D8R II 6YZ (2000)

MACHINE ARRANGEMENT

MACHINE AR

102-4373 COLD WEATHER AR

143-7740 MODIFICATION AR-WOODCHIP

#SEBC13090001

102-4373: COLD WEATHER AR

COLD WEATHER AR

102-4373 COLD WEATHER AR
S/N 6YZ1-UP
MINUS 35 DEGREES C (MINUS 95 DEGREES F)
CANNOT BE USED WITH NON-SUSPENDED UNDERCARRIAGE
AN ATTACHMENT

i02618451 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
107-9357 Y	[2]	IDLER GP-TRACK (REAR)
		-OR-
244-0878 Y	[2]	IDLER GP-TRACK (REAR)
107-9358 Y	[2]	IDLER GP-TRACK (FRONT)
		-OR-
244-0879 Y	[2]	IDLER GP-TRACK (FRONT)
197-7637 Y	[8]	ROLLER GP-TRACK-SINGLE FLANGE
		-OR-
278-9539 Y	[8]	ROLLER GP-TRACK-SINGLE FLANGE
278-9539 JY	[2]	ROLLER GP-TRACK-SINGLE FLANGE
197-7638 Y	[8]	ROLLER GP-TRACK-DOUBLE FLANGE
		-OR-
278-9540 Y	[8]	ROLLER GP-TRACK-DOUBLE FLANGE

266-3152	[32]	PIN AS-CARTRIDGE
		(EACH INCLUDES)
6Y-0473	[2]	PLUG-CLEAR
9G-4872	[2]	STOPPER-RUBBER
J		PART OF ATTACHMENT ROLLER AR-CARRIER (GUARD READY) IF MACHINE IS EQUIPPED
Y		SEPARATE ILLUSTRATION

#SEBC13090002

143-7740: MODIFICATION AR-WOODCHIP

MODIFICATION AR-WOODCHIP

143-7740 MODIFICATION AR-WOODCHIP
S/N 6YZ1-773
CANNOT BE USED WITH 158-2960 AIR CONDITIONER AR
AN ATTACHMENT

i01400745 SEBC1309

1437740 MODIFICATION AR-WOODCHIP Parts scheme

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	118-7441 Y	[1]	GUARD AS-RADIATOR
2.	118-7442 Y	[1]	GRILL GP-RADIATOR

	FY	[1]	AIR CONDITIONER AR
	FY	[1]	LIGHTING AR-FLOOD (CAB)
	FY	[1]	PRECLEANER AR (TURBINE)
	202-9780 FY	[1]	ALTERNATOR GP-CHARGING
	163-4061 F	[7]	CORE AS-RADIATOR
	163-4062 F	[2]	CORE AS-RADIATOR
	F	[1]	HOOD AS

			***STANDARD REMOVALS***
	8T-4223 L	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
	8T-9389 L	[8]	BOLT (1/2-13X2.75-IN)
	108-4210 L	[1]	DOOR AS
	108-4211 L	[1]	DOOR AS
	108-4217 L	[1]	GUARD AS
	3B-4629 N	[3]	PIN-COTTER
	3T-2747 N	[12]	RETAINER
	5P-1075 N	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
	6V-8182 N	[12]	NUT (3/4-10-THD)
	7J-0252 N	[3]	PIN
	7X-0582 N	[12]	WASHER-HARD (20X44.5X6-MM THK)
	7X-0594 N	[6]	WASHER-HARD (20X38X3-MM THK)
	8C-8842 N	[2]	BOLT (3/4-10X4-IN)
	8T-8925 N	[10]	BOLT (3/4-10X4.75-IN)
	9B-7237 N	[2]	BOLT (3/8-16X1.25-IN)
	107-6174 N	[1]	COVER AS
	159-3879 N	[1]	GUARD AS
	159-3880 N	[1]	GUARD AS
	159-3881 N	[1]	GUARD AS
	109-3622 P	[7]	CORE AS-RADIATOR (LONG)
	113-9539 P	[2]	CORE AS-RADIATOR (SHORT)
	172-0335 S	[1]	ALTERNATOR GP-CHARGING

			***ATTACHMENT REMOVALS***
	Q	[1]	HOOD AS

	F		NOT SHOWN
	L		PART OF STANDARD GUARD GP-RADIATOR
	N		PART OF STANDARD GUARD GP-BOTTOM
	P		PART OF STANDARD RADIATOR GP
	Q		PART OF ATTACHMENT ENCLOSURE GP-ENGINE
	S		PART OF STANDARD INSTALLATION AR
	Y		SEPARATE ILLUSTRATION

#SEBC13090003

143-7740: MODIFICATION AR-WOODCHIP

MODIFICATION AR-WOODCHIP

143-7740 MODIFICATION AR-WOODCHIP
S/N 6YZ774-826
CANNOT BE USED WITH 158-2960 AIR CONDITIONER AR
AN ATTACHMENT

i02377939 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	118-7441 Y	[1]	GUARD AS-RADIATOR
2.	118-7442 Y	[1]	GRILL GP-RADIATOR

	FY	[1]	AIR CONDITIONER AR
	210-4566 CFY	[1]	LIGHTING AR-FLOOD (CAB)
	FY	[1]	PRECLEANER AR (TURBINE)
	202-9780 FY	[1]	ALTERNATOR GP-CHARGING
	163-4061 F	[7]	CORE AS-RADIATOR
	163-4062 F	[2]	CORE AS-RADIATOR
	F	[1]	HOOD AS

			***STANDARD REMOVALS***
	8T-4223 L	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
	8T-9389 L	[8]	BOLT (1/2-13X2.75-IN)
	108-4210 L	[1]	DOOR AS
	108-4211 L	[1]	DOOR AS
	108-4217 L	[1]	GUARD AS
	3B-4629 N	[3]	PIN-COTTER
	3T-2747 N	[12]	RETAINER
	5P-1075 N	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
	6V-8182 N	[12]	NUT (3/4-10-THD)
	7J-0252 N	[3]	PIN
	7X-0582 N	[12]	WASHER-HARD (20X44.5X6-MM THK)
	7X-0594 N	[6]	WASHER-HARD (20X38X3-MM THK)
	8C-8842 N	[2]	BOLT (3/4-10X4-IN)
	8T-8925 N	[10]	BOLT (3/4-10X4.75-IN)
	9B-7237 N	[2]	BOLT (3/8-16X1.25-IN)
	107-6174 N	[1]	COVER AS
	159-3879 N	[1]	GUARD AS
	159-3880 N	[1]	GUARD AS
	159-3881 N	[1]	GUARD AS
	109-3622 P	[7]	CORE AS-RADIATOR (LONG)
	113-9539 P	[2]	CORE AS-RADIATOR (SHORT)
	172-0335 S	[1]	ALTERNATOR GP-CHARGING

			***ATTACHMENT REMOVALS***
	Q	[1]	HOOD AS

	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	L		PART OF STANDARD GUARD GP-RADIATOR
	N		PART OF STANDARD GUARD GP-BOTTOM
	P		PART OF STANDARD RADIATOR GP
	Q		PART OF ATTACHMENT ENCLOSURE GP-ENGINE
	S		PART OF STANDARD INSTALLATION AR
	Y		SEPARATE ILLUSTRATION

#SEBC13090004

143-7740: MODIFICATION AR-WOODCHIP

MODIFICATION AR-WOODCHIP

143-7740 MODIFICATION AR-WOODCHIP
S/N 6YZ827-1471
CANNOT BE USED WITH 158-2960 AIR CONDITIONER AR
AN ATTACHMENT

i02377959 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.		[1]	HOOD AS
2.	132-8502 E		SEAL (45-CM EACH)
3.	211-5262 CY	[1]	GRILL GP-RADIATOR

	FY	[1]	AIR CONDITIONER AR
	210-4566 FY	[1]	LIGHTING AR-FLOOD (CAB)
	FY	[1]	PRECLEANER AR (TURBINE)
	202-9780 FY	[1]	ALTERNATOR GP-CHARGING
	163-4061 F	[7]	CORE AS-RADIATOR
	163-4062 F	[2]	CORE AS-RADIATOR

			***STANDARD REMOVALS***
	3B-4629 N	[3]	PIN-COTTER
	3T-2747 N	[12]	RETAINER
	5P-1075 N	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
	6V-8182 N	[12]	NUT (3/4-10-THD)
	7J-0252 N	[3]	PIN
	7X-0582 N	[12]	WASHER-HARD (20X44.5X6-MM THK)
	7X-0594 N	[6]	WASHER-HARD (20X38X3-MM THK)
	8C-8842 N	[2]	BOLT (3/4-10X4-IN)
	8T-8925 N	[10]	BOLT (3/4-10X4.75-IN)
	9B-7237 N	[2]	BOLT (3/8-16X1.25-IN)
	107-6174 N	[1]	COVER AS
	159-3879 N	[1]	GUARD AS
	159-3880 N	[1]	GUARD AS
	159-3881 N	[1]	GUARD AS
	109-3622 P	[7]	CORE AS-RADIATOR (LONG)
	113-9539 P	[2]	CORE AS-RADIATOR (SHORT)
	172-0335 S	[1]	ALTERNATOR GP-CHARGING

			***ATTACHMENT REMOVALS***
	Q	[1]	HOOD AS

	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	N		PART OF STANDARD GUARD GP-BOTTOM
	P		PART OF STANDARD RADIATOR GP
	Q		PART OF ATTACHMENT ENCLOSURE GP-ENGINE
	S		PART OF STANDARD INSTALLATION AR
	Y		SEPARATE ILLUSTRATION

#SEBC13090005

143-7740: MODIFICATION AR-WOODCHIP

MODIFICATION AR-WOODCHIP

143-7740 MODIFICATION AR-WOODCHIP
S/N 6YZ1472-2025
CANNOT BE USED WITH 158-2960 AIR CONDITIONER AR
AN ATTACHMENT

i02378001 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1S-4589 C	[1]	ROD
2.	4N-8218 C	[1]	V-BELT (ALTERNATOR)
3.	7K-1181 C	[1]	STRAP-CABLE
4.	8Q-1963	[1]	PULLEY-ALTERNATOR
5.	9S-3784 C	[1]	BLOCK
6.	178-1781 C	[1]	CLIP
7.	184-5498	[1]	BRACKET AS
	1F-0750	[2]	NUT-WELD (3/8-16-THD)
8.	197-8820 Y	[1]	ALTERNATOR GP-CHARGING (24-VOLT, 95-AMPERE)
10.	203-0463 C	[1]	STRAP AS
11.	211-5262 Y	[1]	GRILL GP-RADIATOR
12.	226-6353 CY	[1]	LINES GP-ALTERNATOR AIR
13.	232-1318	[1]	COVER AS
14.	238-4500 C	[1]	HOOD AS
15.	247-2836 Y	[1]	PRECLEANER AR (TURBINE)
16.	0S-1618	[1]	BOLT (5/16-18X1-IN)
17.	4L-6459 C	[1]	BOLT (3/8-16X2.5-IN)
18.	5M-3062	[1]	BOLT (3/8-16X0.75-IN)
19.	5P-2566 C	[1]	BOLT (1/2-13X1.5-IN)
20.	6V-8801 C	[1]	NUT (3/8-16-THD)
21.	7X-0345 C	[1]	BOLT (5/8-11X1.75-IN)
22.	7X-0448 C	[2]	NUT (5/8-11-THD)
23.	8T-4122 C	[1]	WASHER-HARD (17X32X3.5-MM THK)
24.	8T-4223 C	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
25.	8T-4896 C	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
26.	8T-8919 C	[1]	BOLT (1/2-13X1.75-IN)
27.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
28.	8T-6936 D		SEAL (0.6-M)

	217-0004 FY	[1]	RADIATOR AR
	FY	[1]	AIR CONDITIONER AR
	210-4566 FY	[1]	LIGHTING AR-FLOOD (CAB)
	231-1462 CFY	[1]	SEAL GP-WASTE HANDLING

			***STANDARD REMOVALS***
	3B-4629 N	[3]	PIN-COTTER
	3T-2747 N	[12]	RETAINER
	5P-1075 N	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
	6V-8182 N	[12]	NUT (3/4-10-THD)
	7J-0252 N	[3]	PIN
	7X-0582 N	[12]	WASHER-HARD (20X44.5X6-MM THK)
	7X-0594 N	[6]	WASHER-HARD (20X38X3-MM THK)
	8C-8842 N	[2]	BOLT (3/4-10X4-IN)
	8T-8925 N	[10]	BOLT (3/4-10X4.75-IN)
	9B-7237 N	[2]	BOLT (3/8-16X1.25-IN)
	107-6174 N	[1]	COVER AS
	159-3879 N	[1]	GUARD AS
	159-3880 N	[1]	GUARD AS
	159-3881 N	[1]	GUARD AS
	172-0335 S	[1]	ALTERNATOR GP-CHARGING
	132-5535 C	[1]	BRACKET AS
	235-8239 C	[1]	HOOD AS

	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	F		NOT SHOWN
	N		PART OF STANDARD GUARD GP-BOTTOM
	R		REMFG PART MAY BE AVAILABLE
	S		PART OF STANDARD INSTALLATION AR
	Y		SEPARATE ILLUSTRATION

#SEBC13090006

143-7740: MODIFICATION AR-WOODCHIP

MODIFICATION AR-WOODCHIP

143-7740 MODIFICATION AR-WOODCHIP
S/N 6YZ2026-UP
CANNOT BE USED WITH 158-2960 AIR CONDITIONER AR
AN ATTACHMENT

i02327347 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1S-4589	[1]	ROD
2.	4N-8218	[1]	V-BELT (ALTERNATOR)
3.	7K-1181	[1]	STRAP-CABLE
4.	8Q-1963	[1]	PULLEY-ALTERNATOR
5.	9S-3784	[1]	BLOCK
6.	178-1781	[1]	CLIP
7.	184-5498	[1]	BRACKET AS
	1F-0750	[2]	NUT-WELD (3/8-16-THD)
8.	197-8820 Y	[1]	ALTERNATOR GP-CHARGING (24-VOLT, 95-AMPERE)
10.	203-0463	[1]	STRAP AS
11.	228-0383 CY	[1]	GRILL GP-RADIATOR
12.	226-6353 Y	[1]	LINES GP-ALTERNATOR AIR
13.	258-5035	[1]	COVER AS-ALTERNATOR
	232-1318	[1]	COVER AS
	8T-6936 D		SEAL (0.6-M)
14.	238-4500	[1]	HOOD AS
15.	247-2836 Y	[1]	PRECLEANER AR (TURBINE)
16.	0S-1618	[1]	BOLT (5/16-18X1-IN)
17.	4L-6459	[1]	BOLT (3/8-16X2.5-IN)
18.	5M-3062	[1]	BOLT (3/8-16X0.75-IN)
19.	5P-2566	[1]	BOLT (1/2-13X1.5-IN)
20.	6V-8801	[1]	NUT (3/8-16-THD)
21.	7X-0345	[1]	BOLT (5/8-11X1.75-IN)
22.	7X-0448	[2]	NUT (5/8-11-THD)
23.	8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
24.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
25.	8T-4896	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
26.	8T-8919	[1]	BOLT (1/2-13X1.75-IN)
27.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)

	217-0004 FY	[1]	RADIATOR AR
	FY	[1]	AIR CONDITIONER AR
	210-4566 FY	[1]	LIGHTING AR-FLOOD (CAB)
	231-1462 FY	[1]	SEAL GP-WASTE HANDLING

			***STANDARD REMOVALS***
	3T-2747 N	[12]	RETAINER
	6V-8182 N	[12]	NUT (3/4-10-THD)
	7X-0582 N	[12]	WASHER-HARD (20X44.5X6-MM THK)
	8C-8842 N	[2]	BOLT (3/4-10X4-IN)
	159-3880 N	[1]	GUARD AS
	159-3881 N	[1]	GUARD AS
	3B-4640 N	[3]	PIN-COTTER
	7X-0375 N	[10]	BOLT (3/4-10X5-IN)
	8C-6913 N	[6]	WASHER-HARD (24X41.5X4-MM THK)
	8T-4136 NM	[2]	BOLT (M10X1.5X25-MM)
	8T-4222 N	[2]	WASHER-PLATED (11X32X2.5-MM THK)
	191-8283 N	[3]	PIN
	318-0640 N	[1]	COVER AS
	322-4988 N	[1]	GUARD AS
	172-0335 S	[1]	ALTERNATOR GP-CHARGING
	132-5535	[1]	BRACKET AS
	235-8239	[1]	HOOD AS
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	F		NOT SHOWN
	M		METRIC PART
	N		PART OF STANDARD GUARD GP-BOTTOM
	R		REMFG PART MAY BE AVAILABLE
	S		PART OF STANDARD INSTALLATION AR
	Y		SEPARATE ILLUSTRATION

#SEBC13090007

143-7721: WASTE HANDLING AR

WASTE HANDLING AR

143-7721 WASTE HANDLING AR
S/N 6YZ1-UP
CANNOT BE USED WITH AIR CONDITIONER
AN ATTACHMENT

i02386547 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
170-5758 Y	[2]	FRAME AS-TRACK ROLLER (FRONT)
159-8838 Y	[1]	GUARD AR-FINAL DRIVE
166-4428 Y	[1]	GUARD AR-IDLER
Y	[1]	LIGHTING AR-FLOOD (CAB)
		S/N 6YZ1-773
210-4566 Y	[1]	LIGHTING AR-FLOOD (CAB)
		S/N 6YZ774-Up
231-1462 Y	[1]	SEAL GP-WASTE HANDLING
143-7722 Y	[1]	WASTE HANDLING AR

		***STANDARD REMOVALS***
171-8714 L	[2]	FRAME AS-FRONT
L		PART OF STANDARD FRAME GP-TELESCOPING RECOIL
Y		SEPARATE ILLUSTRATION

#SEBC13090008

143-7722: WASTE HANDLING AR

WASTE HANDLING AR

143-7722 WASTE HANDLING AR
S/N 6YZ1-419
PART OF 143-7721, 183-3870, 199-0818 WASTE HANDLING AR
AN ATTACHMENT

i01400671 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-5125 Y	[1]	LINES GP-TILT CYLINDER
2.	176-0841	[1]	PLATE AS (LH)
	1F-0750	[8]	NUT-WELD (3/8-16-THD)
3.	118-7442 Y	[1]	GRILL GP-RADIATOR
4.	Y	[1]	GUARD GP-BOTTOM
5.	118-7441 Y	[1]	GUARD AS-RADIATOR
6.	5P-7211 BD		SEAL
7.	Z	[2]	PLATE
8.	9Z-9129	[2]	BAR
9.	109-5196	[2]	FILM-WASTE HANDLER
10.	9Z-9128	[2]	BAR
11.	1Z-9278	[2]	BAR
12.	9Z-9127	[2]	BAR
13.	1Z-9277	[2]	BAR
14.	1Q-2983	[1]	BAR
15.	1Q-3000	[1]	BAR
16.	1Q-3685	[2]	PLATE
17.	1Q-2423	[2]	HANDLE AS
18.	8T-4835	[6]	BOLT (1/2-13X2-IN)
19.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
20.	1Q-2130	[1]	HANDLE AS
21.	176-0840	[1]	PLATE AS (RH)
	1F-0750	[8]	NUT-WELD (3/8-16-THD)

	8S-2385 F	[1]	PIPE AS-AIR INLET
	202-9780 FY	[1]	ALTERNATOR GP-CHARGING
	1Z-0746 FY	[1]	GUARD GP-SEAL

			***STANDARD REMOVALS***
	108-4217 L	[1]	GUARD AS
	108-4211 L	[1]	DOOR AS
	108-4210 L	[1]	DOOR AS
	3W-3896 L	[1]	HANDHOLD
	8T-4223 L	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	8T-8917 L	[2]	BOLT (1/2-13X1.25-IN)
	N	[1]	GUARD GP-BOTTOM
	8T-4223 P	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
	5P-2424 P	[16]	BOLT (1/2-13X2.25-IN)
	Q	[1]	PLATE AS (RH)
	Q	[1]	PLATE AS (LH)
	3W-3896 S	[2]	HANDHOLD
	5P-2566 S	[4]	BOLT (1/2-13X1.5-IN)
	5P-1076 S	[4]	WASHER-HARD (13.5X30X4-MM THK)
	197-3604 L	[1]	PLATE AS
	172-0335 T	[1]	ALTERNATOR GP-CHARGING
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	F		NOT SHOWN
	L		PART OF STANDARD GUARD GP-RADIATOR
	N		PART OF STANDARD CHASSIS AR
	P		PART OF STANDARD FRAME GP-TELESCOPING RECOIL
	Q		PART OF STANDARD HOOD & GUARD GP
	S		PART OF STANDARD FENDER GP
	T		PART OF STANDARD INSTALLATION AR
	Y		SEPARATE ILLUSTRATION
	Z		NOT SERVICED SEPARATELY

#SEBC13090009

143-7722: WASTE HANDLING AR

WASTE HANDLING AR

143-7722 WASTE HANDLING AR
S/N 6YZ420-826
PART OF 143-7721, 183-3870, 199-0818 WASTE HANDLING AR
AN ATTACHMENT

i01557176 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-5125 Y	[1]	LINES GP-TILT CYLINDER
2.	176-0841	[1]	PLATE AS (LH)
	1F-0750	[8]	NUT-WELD (3/8-16-THD)
3.	118-7442 Y	[1]	GRILL GP-RADIATOR
4.	Y	[1]	GUARD GP-BOTTOM
5.	118-7441 Y	[1]	GUARD AS-RADIATOR
6.	132-8502		SEAL (152CM)
7.		[2]	PLATE
8.	9Z-9129	[2]	BAR
9.	202-1364	[2]	FILM-IDENTIFICATION (WASTE HANDLER)
10.	9Z-9128	[2]	BAR
11.	1Z-9278	[2]	BAR
12.	9Z-9127	[2]	BAR
13.	1Z-9277	[2]	BAR
14.	1Q-2983	[1]	BAR
15.	1Q-3000	[1]	BAR
16.	1Q-3685	[2]	PLATE
17.	1Q-2423	[2]	HANDLE AS
18.	8T-4835	[6]	BOLT (1/2-13X2-IN)
19.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
20.	1Q-2130	[1]	HANDLE AS
21.	176-0840	[1]	PLATE AS (RH)
	1F-0750	[8]	NUT-WELD (3/8-16-THD)
22.	202-1331	[1]	PLATE AS
23.	9Q-3670	[1]	V-BELT (FAN)

	8S-2385 F	[1]	PIPE AS-AIR INLET
	202-9780 FY	[1]	ALTERNATOR GP-CHARGING
	1Z-0746 FY	[1]	GUARD GP-SEAL

			***STANDARD REMOVALS***
	108-4217 L	[1]	GUARD AS
	108-4211 L	[1]	DOOR AS
	108-4210 L	[1]	DOOR AS
	3W-3896 L	[1]	HANDHOLD (GRAB)
	8T-4223 L	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	8T-8917 L	[2]	BOLT (1/2-13X1.25-IN)
	N	[1]	GUARD GP-BOTTOM
	129-2416 P	[1]	V-BELT SET (INCLUDES 3-BELTS)
	Q	[1]	PLATE AS (RH)
	Q	[1]	PLATE AS (LH)
	3W-3896 S	[2]	HANDHOLD (GRAB)
	5P-2566 S	[4]	BOLT (1/2-13X1.5-IN)
	5P-1076 S	[4]	WASHER-HARD (13.5X30X4-MM THK)
	197-3604 L	[1]	PLATE AS
	172-0335 T	[1]	ALTERNATOR GP-CHARGING
	F		NOT SHOWN
	L		PART OF STANDARD GUARD GP-RADIATOR
	N		PART OF STANDARD CHASSIS AR
	P		PART OF STANDARD DRIVE GROUP - FAN
	Q		PART OF STANDARD HOOD & GUARD GP
	S		PART OF STANDARD FENDER GP
	T		PART OF STANDARD INSTALLATION AR
	Y		SEPARATE ILLUSTRATION

Information:

MACHINE ARRANGEMENT

MACHINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Special Instruction

General Welding Procedures {0679, 7000}
General Welding Procedures {0679, 7000}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Installation of G610 Hardware for Cat® Terrain for Track-Type Tractors {7605}
Installation of G610 Hardware for Cat^® Terrain for Track-Type Tractors {7605}

Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat^® and Non-Cat Equipment {4203, 7490}

Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat^® and Non-Cat Equipment {7606}

Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat^® and Non-Cat Products {7600, 7610, 7620}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SYSTEMS ON CERTAIN TRACK-TYPE TRACTORS AND TRACK-TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SYSTEMS ON CERTAIN TRACK-TYPE TRACTORS AND TRACK-TYPE LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

Tool Operating Manual

439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

Service Intervals
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Service Letter-APD

Technical Analysis

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}

Service Magazine

Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog D8R II :

143-7740 MODIFICATION AR-WOODCHIP

143-7721 WASTE HANDLING AR

143-7722 WASTE HANDLING AR

Truck sale:

Caterpillar D8R II
- Crawler dozers
FINNING CANADA

510.000

Caterpillar D8R II, Bulldozer, Bau-Und Bergbauausrüstung

165.000

Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung

125.000

Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung

165.000

Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung