143-7722 WASTE HANDLING AR S/N 6YZ827-1026 PART OF 143-7721, 183-3870, 199-0818 WASTE HANDLING AR AN ATTACHMENT D8R II

MACHINE ARRANGEMENT

MACHINE AR

0. 143-7722 WASTE HAND
1. 143-7722 WASTE HAND
2. 143-7722 WASTE HAND
3. 143-7722 WASTE HAND
4. 183-3870 WASTE HAND
5. 199-0818 WASTE HAND

BASIC ENGINE

DRIVE GP-FAN

6. 162-7976 DRIVE GP-F

COOLING SYSTEM

COOLING GP

7. 217-0005 COOLING AR
8. 204-7976 COOLING AR
9. 240-0723 COOLING AR
0. INFORMATION

TRACK-TYPE TRACTOR D8R II TRACK-TYPE TRACTOR 6YZ
D8R Custom Parts Manual Track Type Tractor 6YZ00001-UP (MACHINE) SEBC1309 D8R II 6YZ (2000)

MACHINE ARRANGEMENT

MACHINE AR

143-7722 WASTE HANDLING AR

#SEBC13090010

143-7722: WASTE HANDLING AR

WASTE HANDLING AR

143-7722 WASTE HANDLING AR
S/N 6YZ827-1026
PART OF 143-7721, 183-3870, 199-0818 WASTE HANDLING AR
AN ATTACHMENT

i01708584 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-5125 Y	[1]	LINES GP-TILT CYLINDER
3.	8S-2385	[1]	PIPE AS-AIR INLET
6.	9Z-9129	[2]	BAR
7.	202-1364	[2]	FILM-IDENTIFICATION (WASTE HANDLER)
8.	9Z-9128	[2]	BAR
9.	1Z-9278	[2]	BAR
10.	9Z-9127	[2]	BAR
11.	1Z-9277	[2]	BAR
12.	1Q-2983	[1]	BAR
13.	1Q-3000	[1]	BAR
14.	1Q-3685	[2]	PLATE
15.	1Q-2423	[2]	HANDLE AS
16.	8T-4835	[6]	BOLT (1/2-13X2-IN)
17.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
18.	1Q-2130	[1]	HANDLE AS
19.	176-0840	[1]	PLATE AS (RH)
	1F-0750	[8]	NUT-WELD (3/8-16-THD)
20.	176-0841	[1]	PLATE AS (LH)
	1F-0750	[8]	NUT-WELD (3/8-16-THD)
21.		[2]	PLATE
22.	202-1331	[1]	PLATE AS
23.	132-8502 BE		SEAL
24.	9Q-3670	[1]	V-BELT (FAN)
25.	211-5262 CY	[1]	GRILL GP-RADIATOR

	FY	[1]	GUARD GP-BOTTOM
	202-9780 FY	[1]	ALTERNATOR GP-CHARGING
	1Z-0746 FY	[1]	GUARD GP-SEAL

			***STANDARD REMOVAL***
	3W-3896 L	[1]	HANDHOLD (GRAB)
	8T-4223 L	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	8T-8917 L	[2]	BOLT (1/2-13X1.25-IN)
	N	[1]	GUARD GP-BOTTOM
	129-2416 P	[1]	V-BELT SET (INCLUDES 3-BELTS)
	Q	[1]	PLATE AS (RH)
	Q	[1]	PLATE AS (LH)
	3W-3896 S	[2]	HANDHOLD (GRAB)
	5P-2566 S	[4]	BOLT (1/2-13X1.5-IN)
	5P-1076 S	[4]	WASHER-HARD (13.5X30X4-MM THK)
	197-3604 L	[1]	PLATE AS
	172-0335 T	[1]	ALTERNATOR GP-CHARGING
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	L		PART OF STANDARD GUARD GP-RADIATOR
	N		PART OF SARNDARD CHASSIS AR
	P		PART OF STANDARD DRIVE GP-FAN
	Q		PART OF STANDARD HOOD & GUARD GP
	S		PART OF STANDARD FENDER GP
	T		PART OF STANDARD INSTALLATION AR
	Y		SEPARATE ILLUSTRATION

#SEBC13090011

143-7722: WASTE HANDLING AR

WASTE HANDLING AR

143-7722 WASTE HANDLING AR
S/N 6YZ1027-1425
PART OF 143-7721, 183-3870, 199-0818 WASTE HANDLING AR
AN ATTACHMENT

i01902984 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1Q-2130	[1]	HANDLE AS
2.	1Q-2423	[2]	HANDLE AS
3.	1Q-3685	[2]	PLATE
4.	1Z-0746 Y	[1]	GUARD GP-SEAL
6.	8S-2385	[1]	PIPE AS-AIR INLET
7.	9Q-3670	[1]	V-BELT (FAN)
8.	Y	[1]	GUARD GP-BOTTOM
9.	176-0840	[1]	PLATE AS (RH)
10.	176-0841	[1]	PLATE AS (LH)
11.	202-1331	[1]	PLATE AS
12.	202-1364	[2]	FILM-IDENTIFICATION (WASTE HANDLER)
13.	202-9780 Y	[1]	ALTERNATOR GP-CHARGING
14.	211-5262 Y	[1]	GRILL GP-RADIATOR
15.	215-7329	[2]	BAFFLE AS
16.	224-3899 CY	[1]	LINES GP-TILT CYLINDER
18.	1Q-2983	[1]	BAR
19.	1Q-3000	[1]	BAR
20.	1Z-9277	[2]	BAR
21.	1Z-9278	[2]	BAR
22.	5P-1075	[4]	WASHER-HARD (10.2X22.5X3-MM THK)
23.	6V-8801	[4]	NUT (3/8-16-THD)
24.	8T-2502	[4]	BOLT (3/8-16X1.125-IN)
25.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
26.	8T-4226	[4]	WASHER-PLATED (10.5X45X3-MM THK)
27.	8T-4835	[6]	BOLT (1/2-13X2-IN)
28.	9Z-9127	[2]	BAR
29.	9Z-9128	[2]	BAR
30.	9Z-9129	[2]	BAR

			***STANDARD REMOVAL***
	3W-3896 L	[1]	HANDHOLD (GRAB)
	8T-4223 L	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	8T-8917 L	[2]	BOLT (1/2-13X1.25-IN)
	N	[1]	GUARD GP-BOTTOM
	129-2416 P	[1]	V-BELT SET (INCLUDES 3-BELTS)
	T	[1]	PLATE AS (RH)
	T	[1]	PLATE AS (LH)
	3W-3896 S	[2]	HANDHOLD (GRAB)
	5P-2566 S	[4]	BOLT (1/2-13X1.5-IN)
	5P-1076 S	[4]	WASHER-HARD (13.5X30X4-MM THK)
	197-3604 L	[1]	PLATE AS
	C		CHANGE FROM PREVIOUS TYPE
	L		PART OF STANDARD GUARD GP-RADIATOR
	N		PART OF STANDARD CHASSIS AR
	P		PART OF STANDARD DRIVE GP-FAN
	S		PART OF STANDARD FENDER GP
	T		PART OF STANDARD HOOD & GUARD GP
	Y		SEPARATE ILLUSTRATION

#SEBC13090012

143-7722: WASTE HANDLING AR

WASTE HANDLING AR

143-7722 WASTE HANDLING AR
S/N 6YZ1426-2025
PART OF 143-7721, 183-3870, 199-0818 WASTE HANDLING AR
AN ATTACHMENT

i02107425 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1Q-2130	[1]	HANDLE AS
2.	1Q-2423	[2]	HANDLE AS
3.	1Z-0746 Y	[1]	GUARD GP-SEAL
6.	8S-2385	[1]	PIPE AS-AIR INLET
7.	9Q-3670	[1]	V-BELT (FAN)
8.	Y	[1]	GUARD GP-BOTTOM
9.	202-1331	[1]	PLATE AS
10.	202-1364	[2]	FILM-IDENTIFICATION (WASTE HANDLER)
11.	211-5262 Y	[1]	GRILL GP-RADIATOR
12.	224-3899 Y	[1]	LINES GP-TILT CYLINDER
13.	226-6352 CY	[1]	ALTERNATOR GP-CHARGING
14.	235-7068	[2]	PLATE
15.	246-2971 Y	[1]	ENCLOSURE GP-ENGINE (LH)
16.	246-2972 Y	[1]	ENCLOSURE GP-ENGINE (RH)
17.	1Q-2983	[1]	BAR
18.	1Q-3000	[1]	BAR
19.	1Z-9277	[2]	BAR
20.	1Z-9278	[2]	BAR
21.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
22.	8T-4835	[6]	BOLT (1/2-13X2-IN)
23.	9Z-9128	[2]	BAR

			***STANDARD REMOVAL***
	3W-3896 L	[1]	HANDHOLD (GRAB)
	8T-4223 L	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	8T-8917 L	[2]	BOLT (1/2-13X1.25-IN)
	N	[1]	GUARD GP-BOTTOM
	129-2416 P	[1]	V-BELT SET (INCLUDES 3-BELTS)
	246-2924 T	[1]	ENCLOSURE GP-ENGINE (RH)
	246-2923 T	[1]	ENCLOSURE GP-ENGINE (LH)
	3W-3896 S	[2]	HANDHOLD (GRAB)
	5P-2566 S	[4]	BOLT (1/2-13X1.5-IN)
	5P-1076 S	[4]	WASHER-HARD (13.5X30X4-MM THK)
	197-3604 L	[1]	PLATE AS
	C		CHANGE FROM PREVIOUS TYPE
	L		PART OF STANDARD GUARD GP-RADIATOR
	N		PART OF STANDARD CHASSIS AR
	P		PART OF STANDARD DRIVE GP-FAN
	S		PART OF STANDARD FENDER GP
	T		PART OF STANDARD ENCLOSURE GP
	Y		SEPARATE ILLUSTRATION

#SEBC13090013

143-7722: WASTE HANDLING AR

WASTE HANDLING AR

143-7722 WASTE HANDLING AR
S/N 6YZ2026-UP
PART OF 143-7721, 183-3870, 199-0818 WASTE HANDLING AR
AN ATTACHMENT

i02312810 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1Q-2130	[1]	HANDLE AS
2.	1Q-2423	[2]	HANDLE AS
3.	1Z-0746 Y	[1]	GUARD GP-SEAL
6.	8S-2385	[1]	PIPE AS-AIR INLET
7.	9Q-3670	[1]	V-BELT (FAN)
8.	Y	[1]	GUARD GP-BOTTOM
9.	202-1364	[2]	FILM-IDENTIFICATION (WASTE HANDLER)
10.	224-3899 Y	[1]	LINES GP-TILT CYLINDER
11.	226-6352 Y	[1]	ALTERNATOR GP-CHARGING
12.	228-0383 CY	[1]	GRILL GP-RADIATOR
13.	235-7068	[2]	PLATE
14.	237-5301 C	[1]	PLATE AS
15.	246-2971 Y	[1]	ENCLOSURE GP-ENGINE (LH)
16.	246-2972 Y	[1]	ENCLOSURE GP-ENGINE (RH)
17.	1Q-2983	[1]	BAR
18.	1Q-3000	[1]	BAR
19.	1Z-9277	[2]	BAR
20.	1Z-9278	[2]	BAR
21.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
22.	8T-4835	[6]	BOLT (1/2-13X2-IN)
23.	9Z-9128	[2]	BAR
24.	9Z-9129	[2]	BAR

			***STANDARD REMOVAL***
	3W-3896 L	[1]	HANDHOLD (GRAB)
	8T-4223 L	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	8T-8917 L	[2]	BOLT (1/2-13X1.25-IN)
	N	[1]	GUARD GP-BOTTOM
	129-2416 P	[1]	V-BELT SET (INCLUDES 3-BELTS)
	246-2924 Q	[1]	ENCLOSURE GP-ENGINE (RH)
	246-2923 Q	[1]	ENCLOSURE GP-ENGINE (LH)
	3W-3896 S	[2]	HANDHOLD (GRAB)
	5P-2566 S	[4]	BOLT (1/2-13X1.5-IN)
	5P-1076 S	[4]	WASHER-HARD (13.5X30X4-MM THK)
	197-3604 L	[1]	PLATE AS
	C		CHANGE FROM PREVIOUS TYPE
	L		PART OF STANDARD GUARD GP-RADIATOR
	N		PART OF STANDARD CHASSIS AR
	P		PART OF STANDARD DRIVE GP-FAN
	Q		PART OF STANDARD ENCLOSURE GP-ENGINE
	S		PART OF STANDARD FENDER GP
	Y		SEPARATE ILLUSTRATION

#SEBC13090014

183-3870: WASTE HANDLING AR

WASTE HANDLING AR

183-3870 WASTE HANDLING AR
S/N 6YZ1-UP
CANNOT BE USED WITH 150-2960 PLATE
AN ATTACHMENT

i02051000 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
159-8838 Y	[1]	GUARD AR-FINAL DRIVE
166-4427 Y	[1]	GUARD AR-IDLER
Y	[1]	LIGHTING AR-FLOOD (6-LAMP, CAB)
		S/N 6YZ1-773
210-4566 Y	[1]	LIGHTING AR-FLOOD (6-LAMP, CAB)
		S/N 6YZ774-Up
231-1462 Y	[1]	SEAL GP-WASTE HANDLING
		S/N 6YZ774-Up
143-7722 Y	[1]	WASTE HANDLING AR
Y		SEPARATE ILLUSTRATION

#SEBC13090015

199-0818: WASTE HANDLING AR

WASTE HANDLING AR

199-0818 WASTE HANDLING AR
S/N 6YZ1-UP
FOR USE WITH NON-SUSPENDED UNDERCARRIAGE
CANNOT BE USED WITH @@@@@199-0817@@@@@
AN ATTACHMENT

i02381123 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
198-9754 Y	[1]	CASE & FRAME GP
128-0302 Y	[2]	FINAL DRIVE GP
129-1330 Y	[1]	GAUGE AR-UNDERCARRIAGE
166-4427 Y	[1]	GUARD AR-IDLER
Y	[1]	LIGHTING AR-FLOOD (6-LAMP, CAB)
		S/N 6YZ1-773
210-4566 Y	[1]	LIGHTING AR-FLOOD (6-LAMP, CAB)
		S/N 6YZ774-Up
231-1462 Y	[1]	SEAL GP-WASTE HANDLING
143-7722 Y	[1]	WASTE HANDLING AR

		***STANDARD REMOVALS***
147-1160 L	[1]	CASE & FRAME GP
157-5072 J	[2]	FINAL DRIVE GP

		***ATTACHMENT REMOVALS***
187-0428 N	[1]	CASE & FRAME GP
J		PART OF STANDARD POWERTRAIN AR
L		PART OF STANDARD CHASSIS AR
N		PART OF ATTACHMENT GUARD AR-BOTTOM
R		REMFG PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBC13090016

162-7976: DRIVE GP-FAN

DRIVE GP-FAN

162-7976 DRIVE GP-FAN -BELT
S/N 6YZ1-UP
PART OF 217-0005 COOLING AR, 183-5439 FAN AR-EJECTOR, 143-7774, 187-2088, 189-0969 RADIATOR AR
AN ATTACHMENT

i01268882 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4W-8595	[1]	PULLEY-CRANKSHAFT
2.	4P-3877	[1]	BRACKET AS-FAN
	4P-3875	[1]	SHAFT-FAN
3.	7E-3641	[1]	PULLEY-FAN DRIVE
4.	0S-1566	[4]	BOLT (5/8-11X1.5-IN)
5.	216-4326	[1]	V-BELT (BANDED)(FAN DRIVE)
6.	1D-4602	[1]	BOLT (5/8-11X9.5-IN)
7.	5F-0149	[1]	SEAL-O-RING
8.	4P-3878	[1]	HUB-FAN PULLEY
9.	1W-4564	[1]	WASHER-RETAINING (17X54X25-MM THK)
10.	3B-1915	[6]	BOLT (3/8-16X1.375-IN)
11.	9W-3620	[2]	CONE-BEARING
12.	4P-3874	[1]	SPACER
13.	159-9376	[1]	PLATE
14.	9W-3621	[2]	CUP-BEARING
15.	8T-4835	[4]	BOLT (1/2-13X2-IN)
16.	8B-8255	[1]	SEAL-LIP TYPE
17.	0S-1588	[6]	BOLT (3/8-16X1.25-IN)
18.	5M-8009	[1]	PIN-SPRING
19.	9Y-7889	[1]	SPACER
20.	8S-2387	[1]	HOSE AS-FLEXIBLE
21.	119-4763	[1]	ADAPTER
22.	3B-8489	[1]	FITTING-GREASE
23.	8L-6557	[1]	CONNECTOR

#SEBC13090017

217-0005: COOLING AR

COOLING AR

217-0005 COOLING AR
S/N 6YZ1-UP
6-ROW CU-NI TUBES, 6-FINS PER INCH. TRASH RESISTANT AMOCS, FAN SPEED INCREASE
FOR USE WITH @@@@@217-0004@@@@@, @@@@@217-0007@@@@@
CANNOT BE USED WITH DESERT AR, SOUND SUPPRESSION
AN ATTACHMENT

i02378081 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
162-7976 Y	[1]	DRIVE GP-FAN

		***STANDARD REMOVALS***
L	[1]	DRIVE GP-FAN
L		PART OF STANDARD INSTALLATION AR
Y		SEPARATE ILLUSTRATION

#SEBC13090018

204-7976: COOLING AR-HIGH AMBIENT TEMP

COOLING AR-HIGH AMBIENT TEMP

204-7976 COOLING AR-HIGH AMBIENT TEMP
S/N 6YZ1-UP
REPLACED BY @@@@@240-0723@@@@@
FOR USE WITH @@@@@160-7441@@@@@
CANNOT BE USED WITH @@@@@160-7442@@@@@, 215-5593 HOOD & GUARD GP, SOUND SUPPRESSION, FAN AR, RADIATOR AR, SANDBLAST GRIDS
AN ATTACHMENT

i01558294 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
204-7981 Y	[1]	ENCLOSURE GP-ENGINE
204-7977 Y	[1]	FAN & GRID AR
Y	[1]	GUARD GP-BOTTOM

163-4063	[7]	CORE AS-RADIATOR
163-4064	[2]	CORE AS-RADIATOR

		***STANDARD REMOVAL***
109-3622 L	[7]	CORE AS-RADIATOR (LONG)
113-9539 L	[2]	CORE AS-RADIATOR (SHORT)
N	[1]	GUARD GP-BOTTOM
L		PART OF STANDARD RADIATOR GROUP
N		PART OF STANDARD CHASSIS AR
Y		SEPARATE ILLUSTRATION

#SEBC13090019

240-0723: COOLING AR-HIGH AMBIENT TEMP

COOLING AR-HIGH AMBIENT TEMP

240-0723 COOLING AR-HIGH AMBIENT TEMP
S/N 6YZ1-UP
FOR USE WITH @@@@@160-7441@@@@@
CANNOT BE USED WITH @@@@@160-7442@@@@@, 215-5593 HOOD & GUARD GP, SOUND SUPPRESSION, FAN AR, RADIATOR AR, SANDBLAST GRIDS
AN ATTACHMENT

i02377849 SEBC1309

For full view, you need register

Parts for your D8R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
Y	[1]	GUARD GP-BOTTOM
204-7977 Y	[1]	FAN & GRID AR
204-7981 Y	[1]	ENCLOSURE GP-ENGINE
217-0007 Y	[1]	RADIATOR AR
231-1462 Y	[1]	SEAL GP-WASTE HANDLING

4N-4534	[1]	PULLEY-CRANKSHAFT
7E-3641	[1]	PULLEY-FAN DRIVE
118-2018	[1]	V-BELT SET (INCLUDES 3-BELTS)
195-8711	[1]	PLUG AS-CODE (MONITOR)
		(ON DASH HARNESS)
8T-8737	[5]	PLUG-SEAL
9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
		(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)

		***STANDARD REMOVAL***
L	[1]	GUARD GP-BOTTOM
184-8026 L	[1]	PLUG AS-CODE (MONITOR)
4N-8596 T	[1]	PULLEY-FAN DRIVE
4W-8595 T	[1]	PULLEY-CRANKSHAFT
129-2416 T	[1]	V-BELT SET (INCLUDES 3-BELTS)
L		PART OF STANDARD CHASSIS AR
T		PART OF STANDARD DRIVE GP - FAN
Y		SEPARATE ILLUSTRATION

Information:

MACHINE ARRANGEMENT

MACHINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Special Instruction

General Welding Procedures {0679, 7000}
General Welding Procedures {0679, 7000}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Installation of G610 Hardware for Cat® Terrain for Track-Type Tractors {7605}
Installation of G610 Hardware for Cat^® Terrain for Track-Type Tractors {7605}

Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat^® and Non-Cat Equipment {4203, 7490}

Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat^® and Non-Cat Equipment {7606}

Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat^® and Non-Cat Products {7600, 7610, 7620}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SYSTEMS ON CERTAIN TRACK-TYPE TRACTORS AND TRACK-TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SYSTEMS ON CERTAIN TRACK-TYPE TRACTORS AND TRACK-TYPE LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

Tool Operating Manual

439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

Service Intervals
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Service Letter-APD

Technical Analysis

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}

Service Magazine

Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog D8R II :

143-7722 WASTE HANDLING AR

143-7721 WASTE HANDLING AR

143-7740 MODIFICATION AR-WOODCHIP

143-7722 WASTE HANDLING AR

183-3870 WASTE HANDLING AR

199-0818 WASTE HANDLING AR

162-7976 DRIVE GP-FAN

217-0005 COOLING AR

204-7976 COOLING AR-HIGH AMBIENT TEMP

Truck sale:

Caterpillar D8R II
- Crawler dozers
FINNING CANADA

510.000

Caterpillar D8R II, Bulldozer, Bau-Und Bergbauausrüstung

165.000

Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung

125.000

Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung

165.000

Caterpillar D8RII, Bulldozer, Bau-Und Bergbauausrüstung