AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

Custom Product Support Literature for the 990 Series II Wheel Loader 4FR00001-UP (MACHINE) WORK TOOLS Caterpillar SIS



WHEEL LOADER 990 II WHEEL LOADER 4FR
 Custom Product Support Literature for the 990 Series II Wheel Loader 4FR00001-UP (MACHINE) SEBC1310 990 II 4FR   (1995)

Parts group 990 II:

  For full view, you need register
WORK TOOLS
BUCKET GP
PIN GP-SLAG BUCKET
2Z-9451 PIN GP-SLAG BUCKET
2Z-9451 PIN GP-SLAG BUCKET
CUSTOM
GROUND ENGAGING TOOLS (G.E.T.)
PIN GP-SLAG BUCKET
2Z-9451 PIN GP-SLAG BUCKET
2Z-9451 PIN GP-SLAG BUCKET
CUSTOM
PIN GP
PIN GP-SLAG BUCKET
2Z-9451 PIN GP-SLAG BUCKET
2Z-9451 PIN GP-SLAG BUCKET
CUSTOM

Information:

(For parts list, see above)

Special Instruction
Conversion Requirements for Buckets and Bucket Pins{6001, 6108, 6118, 6119}
Conversion Requirements for Buckets and Bucket Pins{6001, 6108, 6118, 6119}
Inspection of Slag Buckets{6110}
Inspection of Slag Buckets{6110}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Bucket Stops Provide Additional Protection For Tilt Cylinder {5104, 6001, 6107, 6118, 6119, 7069}
Bucket Stops Provide Additional Protection For Tilt Cylinder {5104, 6001, 6107, 6118, 6119, 7069}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Specifications
Bucket Control Mounting Group
990 WHEEL LOADER HYDRAULIC SYSTEM
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Bucket
990 WHEEL LOADER MACHINE SYSTEMS
Bucket Link
990 WHEEL LOADER MACHINE SYSTEMS
Service Magazine
Revised Special Instruction, SEHS8433-04, &quot;Repair Of Wheel And Track Loader Lift Arms And Levers&quot; Available {0374,6107,6116,6119}
1998/12/07
Special Instructions, REHS1466, "Conversion Requirements for 990 and 990 Series II Buckets and Bucket Pin" {6001, 6108}
2002/12/23
Bucket Stops Provide Additional Protection For Tilt Cylinder {6001, 6119}
Bucket Stops Provide Additional Protection For Tilt Cylinder {6001, 6119}
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
Procedures are Available for Replacing Base Edge Assemblies, Repairing Adapter Weld, and Edge Assembly Cracks on Large Wheel Loader Buckets {6101, 6102, 6131, 6132, 6801, 6818}
2010/09/13
Wheel Loader Bucket Lifting Point Color Change {6001, 6101, 6102, 6104, 6110, 6131, 6132, 6529, 6531, 6704}
2011/02/24
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
Technical Information Bulletin
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Special Instruction
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the &quot;K Series&quot; Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
Filter Retainer Pilot Diameter Changed To Better Fit End Caps Of Hydraulic Filters {5068}
1996/10/14
Mechanically Attached Wear Plate System Is Available {6820}
1998/08/10
The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23
New Wear Plates are Available {6820}
2002/03/18
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Welding Recommendations for the Large Bucket Ground Engaging Tools {0751}
2003/12/15
Correction to Operation and Maintenance Manual , "Bucket Tips - Inspect/Replace" {6805}
2004/04/19
Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2006/02/06
Replace Bucket Pins and Pin Retainers More Frequently in Limestone Applications {0751}
2006/07/31
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
Bevel of 25 &deg; for the Base Edge With the Replacement of Abrasion Adapters {6803}
2010/01/08
Procedures are Available for Replacing Base Edge Assemblies, Repairing Adapter Weld, and Edge Assembly Cracks on Large Wheel Loader Buckets {6101, 6102, 6131, 6132, 6801, 6818}
2010/09/13
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Service Magazine
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Special Instruction
Conversion Requirements for Buckets and Bucket Pins{6001, 6108, 6118, 6119}
Conversion Requirements for Buckets and Bucket Pins{6001, 6108, 6118, 6119}
Bucket Stops Provide Additional Protection For Tilt Cylinder {5104, 6001, 6107, 6118, 6119, 7069}
Bucket Stops Provide Additional Protection For Tilt Cylinder {5104, 6001, 6107, 6118, 6119, 7069}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}

Truck sale:

2005 CAT 990 II
USD $249,500 
2005 CAT 990 II

Kiewit Equipment
Portsmouth, Virginia
2000 CAT 990 II
Call 
2000 CAT 990 II

Chepstow Plant International LTD
Caldicot, England, United Kingdom
 
 
CAT 990 II

H & R Construction Parts & Equipment
Buffalo, New York
1999 CAT 990 II
Call 
1999 CAT 990 II

AS Roger Jensen Trading Co.Ltd.
 
 
CAT 990 II

TAC Parts (Formerly Parts & Equipment)
Uhrichsville, Ohio
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.