AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

Custom Product Support Literature for the 574 Forwarder MTS Clambunk 1FM00001-UP (MACHINE) HYDRAULIC SYSTEM Caterpillar SIS



FORWARDER 574 FORWARDER 1FM
 Custom Product Support Literature for the 574 Forwarder MTS Clambunk 1FM00001-UP (MACHINE) SEBC1315 574 1FM   (1999)

Parts group 574:

  For full view, you need register
HYDRAULIC SYSTEM
CYLINDER GP
CYLINDER GP-BELT TENSIONER
188-1581 CYLINDER GP-BELT TENSIONER
188-1581 CYLINDER GP-BELT TENSIONER -CUSTOM
PART OF 188-1458, 188-1489 BOGIE GP-MAJOR
LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
192-3055 LINES GP-HYDRAULIC
192-3055 LINES GP-HYDRAULIC -CUSTOM
PART OF 192-3047 CLAMBUNK AR

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Testing and Adjusting
Pilot Oil Accumulator (Dead Engine Lower) - Test and Charge
554 Forwarder and 574
Forwarder Hydraulic System
Disassembly and Assembly
Accumulator (Brake) - Remove and Install
554 Forwarder and 574 Forwarder Power Train
Service Magazine
Piston And Bladder Type Accumulators: Service Interval And Service Replacements {5077}
1999/09/27
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Disassembly and Assembly
Brake - Disassemble
554 Forwarder and 574 Forwarder Power Train
Brake - Assemble
554 Forwarder and 574 Forwarder Power Train
Brake Cylinder - Remove
554 Forwarder and 574 Forwarder Power Train
Brake Cylinder - Install
554 Forwarder and 574 Forwarder Power Train
Brake Control Valve (Front) - Remove and Install
554 Forwarder and 574 Forwarder Power Train
Brake Control Valve (Rear) - Remove and Install
554 Forwarder and 574 Forwarder Power Train
Accumulator (Brake) - Remove and Install
554 Forwarder and 574 Forwarder Power Train
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Special Instruction
Modification Procedure for the Hydraulic Cooler Core{1374}
Modification Procedure for the Hydraulic Cooler Core{1374}
Specifications
Coolant Temperature Switch
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Service Magazine
A New Hydraulic Cooler Core Assembly is Available for Service Replacement {1374}
2000/08/14
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Piston And Bladder Type Accumulators: Service Interval And Service Replacements {5077}
1999/09/27
Specifications
Pump Drive Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Service Magazine
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Operation and Maintenance Manual
Bogie Cylinder - Lubricate - If Equipped
554 Forwarder and 574 Forwarder
Log Loader Cylinder and Link Pins - Inspect
554 Forwarder and 574 Forwarder
Tilt Cylinder - Lubricate - If Equipped
554 Forwarder and 574 Forwarder
Oscillation Lock Cylinder - Lubricate
554 Forwarder and 574 Forwarder
Steering Cylinder Bearings - Lubricate
554 Forwarder and 574 Forwarder
Gate Cylinders - Lubricate
554 Forwarder and 574 Forwarder
Steering Cylinder Mounting Bolts - Tighten
554 Forwarder and 574 Forwarder
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
Product Support Program For Installing A Ladder Orifice On Certain 554 And 574 Forwarders
Product Support Program For Installing A Ladder Orifice On Certain 554 And 574 Forwarders
PRODUCT SUPPORT PROGRAM FOR ADDING A LINE RELIEF VALVE TO THE GATE CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
PRODUCT SUPPORT PROGRAM FOR ADDING A LINE RELIEF VALVE TO THE GATE CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Product Support Program For Installing A Ladder Orifice On Certain 554 And 574 Forwarders
Product Support Program For Installing A Ladder Orifice On Certain 554 And 574 Forwarders
PRODUCT SUPPORT PROGRAM FOR ADDING A LINE RELIEF VALVE TO THE GATE CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
PRODUCT SUPPORT PROGRAM FOR ADDING A LINE RELIEF VALVE TO THE GATE CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-Americas
Product Support Program For Installing A Ladder Orifice On Certain 554 And 574 Forwarders
Product Support Program For Installing A Ladder Orifice On Certain 554 And 574 Forwarders
PRODUCT SUPPORT PROGRAM FOR ADDING A LINE RELIEF VALVE TO THE GATE CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
PRODUCT SUPPORT PROGRAM FOR ADDING A LINE RELIEF VALVE TO THE GATE CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Hydraulic Cylinder (Bogie Lift and Steering)
554 Forwarder and 574 Forwarder Hydraulic System
Boom Tilt Cylinder
554 Forwarder and 574 Forwarder Hydraulic System
Boom Cylinder
554 Forwarder and 574 Forwarder Hydraulic System
Stick Cylinder
554 Forwarder and 574 Forwarder Hydraulic System
Extendable Stick Cylinder
554 Forwarder and 574 Forwarder Hydraulic System
Grapple Cylinder
554 Forwarder and 574 Forwarder Hydraulic System
Log Loader Pillar Base
554 Forwarder and 574 Forwarder Hydraulic System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR ADDING A LINE RELIEF VALVE TO THE GATE CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
PRODUCT SUPPORT PROGRAM FOR ADDING A LINE RELIEF VALVE TO THE GATE CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR ADDING A LINE RELIEF VALVE TO THE GATE CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
PRODUCT SUPPORT PROGRAM FOR ADDING A LINE RELIEF VALVE TO THE GATE CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
Testing and Adjusting
Steering Cylinder Pressure - Test and Adjust
554 Forwarder and 574
Forwarder Hydraulic System
Boom Tilt Cylinder and Gate Cylinder (Horizontal) Pressure - Test and Adjust
554 Forwarder and 574
Forwarder Hydraulic System
Grapple Cylinder Pressure - Test and Adjust
554 Forwarder and 574
Forwarder Hydraulic System
Extendable Stick Cylinder Pressure - Test and Adjust
554 Forwarder and 574
Forwarder Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Grapple Cylinder - Remove
554 Forwarder and 574 Forwarder Machine Systems
Grapple Cylinder - Install
554 Forwarder and 574 Forwarder Machine Systems
Steering Cylinder - Remove
554 Forwarder and 574 Forwarder Machine Systems
Steering Cylinder - Install
554 Forwarder and 574 Forwarder Machine Systems
Ladder Cylinder - Remove
554 Forwarder and 574 Forwarder Machine Systems
Ladder Cylinder - Install
554 Forwarder and 574 Forwarder Machine Systems
Oscillation Lock Cylinder - Remove
554 Forwarder and 574 Forwarder Machine Systems
Oscillation Lock Cylinder - Install
554 Forwarder and 574 Forwarder Machine Systems
Gate Cylinder (Vertical) - Remove
554 Forwarder and 574 Forwarder Machine Systems
Gate Cylinder (Vertical) - Install
554 Forwarder and 574 Forwarder Machine Systems
Gate Cylinder (Horizontal) - Remove
554 Forwarder and 574 Forwarder Machine Systems
Gate Cylinder (Horizontal) - Install
554 Forwarder and 574 Forwarder Machine Systems
Bogie Cylinder - Remove
554 Forwarder and 574 Forwarder Machine Systems
Bogie Cylinder - Install
554 Forwarder and 574 Forwarder Machine Systems
Boom Tilt Cylinder - Remove
554 Forwarder and 574 Forwarder Machine Systems
Boom Tilt Cylinder - Install
554 Forwarder and 574 Forwarder Machine Systems
Boom Cylinder - Remove
554 Forwarder and 574 Forwarder Machine Systems
Boom Cylinder - Install
554 Forwarder and 574 Forwarder Machine Systems
Stick Cylinder - Remove
554 Forwarder and 574 Forwarder Machine Systems
Stick Cylinder - Install
554 Forwarder and 574 Forwarder Machine Systems
Extendable Stick Cylinder - Remove
554 Forwarder and 574 Forwarder Machine Systems
Extendable Stick Cylinder - Install
554 Forwarder and 574 Forwarder Machine Systems
Service Magazine
Cylinder Groups Now Have Serviceable Parts {4303, 5486, 5576, 7254, 7562}
2000/04/17
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/07/30
A Guard is Available for the Oscillation Lock Cylinder on 574 Forwarders {7080, 7150}
2003/02/10
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Bushings for the Grapple and the Grapple Cylinder are Now Available {5555}
2002/04/22
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Specifications
Pump Drive Group
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR
Disassembly and Assembly
Pump Drive - Remove and Install
554 Forwarder and 574 Forwarder Machine Systems
Operation and Maintenance Manual
Oil Filter - Inspect
554 Forwarder and 574 Forwarder
Oil Filter (Implement Return) - Replace
554 Forwarder and 574 Forwarder
Oil Filter (Implement Case Drain) - Replace
554 Forwarder and 574 Forwarder
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Specifications
Oil Filter (Implement Case Drain)
554 Forwarder and 574 Forwarder Hydraulic System
Oil Filter (Power Train Charging System)
554 and 574 Forwarders Power Train
Oil Filter (Transmission Gearbox)
554 and 574 Forwarders Power Train
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Special Instruction
New Routing of Hoses for Tilt Log Loaders{5057}
New Routing of Hoses for Tilt Log Loaders{5057}
New Routing of Hoses for Fixed Log Loaders{5057}
New Routing of Hoses for Fixed Log Loaders{5057}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Letter-NACD
Product Support Program For Adding A Lock Plate To Prevent Loader Hose Clamp Bolts From Loosening On Certain 554 And 574 Forwarders
Product Support Program For Adding A Lock Plate To Prevent Loader Hose Clamp Bolts From Loosening On Certain 554 And 574 Forwarders
Product Support Program For Rerouting The Grapple Hoses That Rub And Wear On Each Other On Certain 554 And 574 Harvesters
Product Support Program For Rerouting The Grapple Hoses That Rub And Wear On Each Other On Certain 554 And 574 Harvesters
The Loader Hoses Need To Be Protected And Rerouted To Improve Service Life On Certain 554 And 574 Forwarders
The Loader Hoses Need To Be Protected And Rerouted To Improve Service Life On Certain 554 And 574 Forwarders
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HOSES FROM STICK TO ROTATORS ON CERTAIN 554 AND 574 FORWARDERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HOSES FROM STICK TO ROTATORS ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HOSES FROM STICK TO ROTATORS ON CERTAIN 554 AND 574 FORWARDERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HOSES FROM STICK TO ROTATORS ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HOSES FROM STICK TO ROTATORS ON CERTAIN 554 AND 574 FORWARDERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HOSES FROM STICK TO ROTATORS ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-CSARL
Product Support Program For Adding A Lock Plate To Prevent Loader Hose Clamp Bolts From Loosening On Certain 554 And 574 Forwarders
Product Support Program For Adding A Lock Plate To Prevent Loader Hose Clamp Bolts From Loosening On Certain 554 And 574 Forwarders
Product Support Program For Rerouting The Grapple Hoses That Rub And Wear On Each Other On Certain 554 And 574 Harvesters
Product Support Program For Rerouting The Grapple Hoses That Rub And Wear On Each Other On Certain 554 And 574 Harvesters
The Loader Hoses Need To Be Protected And Rerouted To Improve Service Life On Certain 554 And 574 Forwarders
The Loader Hoses Need To Be Protected And Rerouted To Improve Service Life On Certain 554 And 574 Forwarders
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HOSES FROM STICK TO ROTATORS ON CERTAIN 554 AND 574 FORWARDERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HOSES FROM STICK TO ROTATORS ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-Americas
Product Support Program For Adding A Lock Plate To Prevent Loader Hose Clamp Bolts From Loosening On Certain 554 And 574 Forwarders
Product Support Program For Adding A Lock Plate To Prevent Loader Hose Clamp Bolts From Loosening On Certain 554 And 574 Forwarders
Product Support Program For Rerouting The Grapple Hoses That Rub And Wear On Each Other On Certain 554 And 574 Harvesters
Product Support Program For Rerouting The Grapple Hoses That Rub And Wear On Each Other On Certain 554 And 574 Harvesters
The Loader Hoses Need To Be Protected And Rerouted To Improve Service Life On Certain 554 And 574 Forwarders
The Loader Hoses Need To Be Protected And Rerouted To Improve Service Life On Certain 554 And 574 Forwarders
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HOSES FROM STICK TO ROTATORS ON CERTAIN 554 AND 574 FORWARDERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HOSES FROM STICK TO ROTATORS ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HOSES FROM STICK TO ROTATORS ON CERTAIN 554 AND 574 FORWARDERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HOSES FROM STICK TO ROTATORS ON CERTAIN 554 AND 574 FORWARDERS
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE LOADER HOSES ON CERTAIN 574 FORWARDERS WITH TILTABLE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HOSES FROM STICK TO ROTATORS ON CERTAIN 554 AND 574 FORWARDERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HOSES FROM STICK TO ROTATORS ON CERTAIN 554 AND 574 FORWARDERS
Disassembly and Assembly
Relief Valve (Swing Crossover) - Remove
554 Forwarder and 574 Forwarder Machine Systems
Relief Valve (Swing Crossover) - Install
554 Forwarder and 574 Forwarder Machine Systems
Relief Valve (Swing Crossover) - Disassemble
554 Forwarder and 574 Forwarder Machine Systems
Relief Valve (Swing Crossover) - Assemble
554 Forwarder and 574 Forwarder Machine Systems
Service Magazine
New Lock Plates are Added to the Clamp Bolts on Forwarders {5057}
2000/02/28
New Hoses for the Rotator are Available for Forwarders {5057}
2001/10/08
New Protective Caps For Hose Clamps Are Now Available {5057}
2001/11/19
A Special Instruction is Available for A New Routing of Hoses for Tilt Log Loaders {5057}
2002/01/14
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Service Letter-NACD
Product Support Program For Adding A New Valve To Aid In The Starting Of 554 And 574 Forwarders
Product Support Program For Adding A New Valve To Aid In The Starting Of 554 And 574 Forwarders
A Shuttle Valve Needs To Be Added To The Load Sensing System On Certain 574 Forwarders
A Shuttle Valve Needs To Be Added To The Load Sensing System On Certain 574 Forwarders
Service Letter-CSARL
Product Support Program For Adding A New Valve To Aid In The Starting Of 554 And 574 Forwarders
Product Support Program For Adding A New Valve To Aid In The Starting Of 554 And 574 Forwarders
A Shuttle Valve Needs To Be Added To The Load Sensing System On Certain 574 Forwarders
A Shuttle Valve Needs To Be Added To The Load Sensing System On Certain 574 Forwarders
Service Letter-Americas
Product Support Program For Adding A New Valve To Aid In The Starting Of 554 And 574 Forwarders
Product Support Program For Adding A New Valve To Aid In The Starting Of 554 And 574 Forwarders
A Shuttle Valve Needs To Be Added To The Load Sensing System On Certain 574 Forwarders
A Shuttle Valve Needs To Be Added To The Load Sensing System On Certain 574 Forwarders
Specifications
Accumulator Charging Valve (Brake)
554 and 574 Forwarders Power Train
Pressure Switch (Parking Brake Oil)
554 and 574 Forwarders Power Train
Pressure Switch (Service Brake Oil)
554 and 574 Forwarders Power Train
Testing and Adjusting
Combination Valve (Ladder and Gate) - Test and Adjust
554 Forwarder and 574
Forwarder Hydraulic System
Combination Valve (Differential Lock and Parking Brake) - Test and Adjust
554 and 574 Forwarders Power Train
Disassembly and Assembly
Pressure Reducing Valve (Maximum Signal) - Remove
554 Forwarder and 574 Forwarder Machine Systems
Pressure Reducing Valve (Maximum Signal) - Install
554 Forwarder and 574 Forwarder Machine Systems
Pressure Reducing Valve (Maximum Signal) - Disassemble
554 Forwarder and 574 Forwarder Machine Systems
Pressure Reducing Valve (Maximum Signal) - Assemble
554 Forwarder and 574 Forwarder Machine Systems
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Letter-NACD
Product Support Program For Adding A Lock Plate To Prevent Loader Hose Clamp Bolts From Loosening On Certain 554 And 574 Forwarders
Product Support Program For Adding A Lock Plate To Prevent Loader Hose Clamp Bolts From Loosening On Certain 554 And 574 Forwarders
A Shuttle Valve Needs To Be Added To The Load Sensing System On Certain 574 Forwarders
A Shuttle Valve Needs To Be Added To The Load Sensing System On Certain 574 Forwarders
The Loader Hoses Need To Be Protected And Rerouted To Improve Service Life On Certain 554 And 574 Forwarders
The Loader Hoses Need To Be Protected And Rerouted To Improve Service Life On Certain 554 And 574 Forwarders
AN OIL ACCUMULATOR NEEDS TO BE ADDED IN THE PILOT OIL CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
AN OIL ACCUMULATOR NEEDS TO BE ADDED IN THE PILOT OIL CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Product Support Program For Adding A Lock Plate To Prevent Loader Hose Clamp Bolts From Loosening On Certain 554 And 574 Forwarders
Product Support Program For Adding A Lock Plate To Prevent Loader Hose Clamp Bolts From Loosening On Certain 554 And 574 Forwarders
A Shuttle Valve Needs To Be Added To The Load Sensing System On Certain 574 Forwarders
A Shuttle Valve Needs To Be Added To The Load Sensing System On Certain 574 Forwarders
The Loader Hoses Need To Be Protected And Rerouted To Improve Service Life On Certain 554 And 574 Forwarders
The Loader Hoses Need To Be Protected And Rerouted To Improve Service Life On Certain 554 And 574 Forwarders
AN OIL ACCUMULATOR NEEDS TO BE ADDED IN THE PILOT OIL CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
AN OIL ACCUMULATOR NEEDS TO BE ADDED IN THE PILOT OIL CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-Americas
Product Support Program For Adding A Lock Plate To Prevent Loader Hose Clamp Bolts From Loosening On Certain 554 And 574 Forwarders
Product Support Program For Adding A Lock Plate To Prevent Loader Hose Clamp Bolts From Loosening On Certain 554 And 574 Forwarders
A Shuttle Valve Needs To Be Added To The Load Sensing System On Certain 574 Forwarders
A Shuttle Valve Needs To Be Added To The Load Sensing System On Certain 574 Forwarders
The Loader Hoses Need To Be Protected And Rerouted To Improve Service Life On Certain 554 And 574 Forwarders
The Loader Hoses Need To Be Protected And Rerouted To Improve Service Life On Certain 554 And 574 Forwarders
AN OIL ACCUMULATOR NEEDS TO BE ADDED IN THE PILOT OIL CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
AN OIL ACCUMULATOR NEEDS TO BE ADDED IN THE PILOT OIL CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Solenoid Valve (Oscillation Lock)
554 Forwarder and 574 Forwarder Hydraulic System
Pilot Oil Accumulator (Dead Engine Lower)
554 Forwarder and 574 Forwarder Hydraulic System
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Service Letter-China
AN OIL ACCUMULATOR NEEDS TO BE ADDED IN THE PILOT OIL CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
AN OIL ACCUMULATOR NEEDS TO BE ADDED IN THE PILOT OIL CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-Asia
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Letter-APD
AN OIL ACCUMULATOR NEEDS TO BE ADDED IN THE PILOT OIL CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
AN OIL ACCUMULATOR NEEDS TO BE ADDED IN THE PILOT OIL CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
Testing and Adjusting
Pilot Oil Accumulator (Dead Engine Lower) - Test and Charge
554 Forwarder and 574
Forwarder Hydraulic System
Service Magazine
New Hose Routing Used For Grapple {5057}
1999/11/29
An Updated Load Sensing System is Available for Certain 574 Forwarders {5070}
2000/02/28
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Service Letter-NACD
The Pressure Sensors Fail Prematurely Due To Vibration And Moisture On Certain 554 And 574 Forwarders
The Pressure Sensors Fail Prematurely Due To Vibration And Moisture On Certain 554 And 574 Forwarders
Service Letter-CSARL
Service Letter-Americas
Specifications
Pressure Sensor (Gearshift)
554 and 574 Forwarders Power Train
Pressure Sensor (Power Train Charging System)
554 and 574 Forwarders Power Train
Pressure Sensor (Drive Loop)
554 and 574 Forwarders Power Train
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Service Magazine
New Solenoid Valve (Cold Start) Used {5050,5479}
1999/11/08
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Hydraulic Tank Fill Pump and Motor
554 Forwarder and 574 Forwarder Hydraulic System
Vacuum Pump and Motor
554 Forwarder and 574 Forwarder Hydraulic System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Hydraulic Tank Fill Pump and Motor - Remove and Install
554 Forwarder and 574 Forwarder Power Train
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
Product Support Program For Adding A New Bleed Off Orifice On Certain 574 Forwarders
Product Support Program For Adding A New Bleed Off Orifice On Certain 574 Forwarders
Service Letter-CSARL
Specifications
Steering Metering Pump
554 Forwarder and 574 Forwarder Hydraulic System
Toggle Switch (Tank Fill and Vacuum)
554 Forwarder and 574 Forwarder Hydraulic System
Hydraulic Tank Fill Pump and Motor
554 Forwarder and 574 Forwarder Hydraulic System
Vacuum Pump and Motor
554 Forwarder and 574 Forwarder Hydraulic System
Piston Pump (Implement) - 574 Forwarder
554 Forwarder and 574 Forwarder Hydraulic System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Implement Pump
554 Forwarder and 574 Forwarder Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Implement Pump Standby Pressure - Test and Adjust
554 Forwarder and 574
Forwarder Hydraulic System
Implement Pump High Pressure Cutoff - Test and Adjust
554 Forwarder and 574
Forwarder Hydraulic System
Implement Pump Margin Pressure - Test and Adjust
554 Forwarder and 574
Forwarder Hydraulic System
Bench Test Procedures
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Disassembly and Assembly
Engine and Pumps - Remove
574 Forwarder Engine Supplement
Engine and Pumps - Install
574 Forwarder Engine Supplement
Steering Metering Pump - Remove
554 Forwarder and 574 Forwarder Machine Systems
Steering Metering Pump - Install
554 Forwarder and 574 Forwarder Machine Systems
Steering Metering Pump - Disassemble
554 Forwarder and 574 Forwarder Machine Systems
Piston Pump (Implement) - Remove
554 Forwarder and 574 Forwarder Machine Systems
Piston Pump (Implement) - Install
554 Forwarder and 574 Forwarder Machine Systems
Piston Pump (Implement) - Disassemble
554 Forwarder and 574 Forwarder Machine Systems
Piston Pump (Implement) - Assemble
554 Forwarder and 574 Forwarder Machine Systems
Pump Drive - Remove and Install
554 Forwarder and 574 Forwarder Machine Systems
Vacuum Pump - Remove and Install
554 Forwarder and 574 Forwarder Power Train
Hydraulic Tank Fill Pump and Motor - Remove and Install
554 Forwarder and 574 Forwarder Power Train
Steering Metering Pump - Assemble
554 Forwarder and 574 Forwarder Machine Systems
Service Magazine
An Updated Load Sensing System is Available for Certain 574 Forwarders {5070}
2000/02/28
Modifications to the Implement Pump Are Used on Forwarders {5070, 5084}
2001/05/14
Correction to Disassembly and Assembly , "Steering Metering Pump - Disassemble" {4312}
2003/03/17
Correction to Disassembly and Assembly , "Steering Metering Pump - Assemble" {4312}
2003/03/17
Correction to Testing and Adjusting , "Implement Pump Standby Pressure - Test and Adjust" {5070, 5084}
2003/03/17
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
The Serviceability of Metering Pumps Has Been Limited {4312}
2006/05/15
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/01/27
Operation and Maintenance Manual
Oil Filter - Inspect
554 Forwarder and 574 Forwarder
Oil Filter (Implement Return) - Replace
554 Forwarder and 574 Forwarder
Oil Filter (Power Train Tank Fill) - Replace
554 Forwarder and 574 Forwarder
Hydraulic System Oil - Change
554 Forwarder and 574 Forwarder
Hydraulic System Oil Level - Check
554 Forwarder and 574 Forwarder
Power Train Oil - Change
554 Forwarder and 574 Forwarder
Power Train Oil Level - Check
554 Forwarder and 574 Forwarder
Service Letter-NACD
THE BREATHERS FOR THE HYDRAULIC OIL TANK MAY LEAK AND NEED TO BE REPLACED ON CERTAIN 554 AND 574 FORWARDERS
THE BREATHERS FOR THE HYDRAULIC OIL TANK MAY LEAK AND NEED TO BE REPLACED ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Toggle Switch (Tank Fill and Vacuum)
554 Forwarder and 574 Forwarder Hydraulic System
Pressure Sensor (Filter Return)
554 Forwarder and 574 Forwarder Hydraulic System
Hydraulic Tank Fill Pump and Motor
554 Forwarder and 574 Forwarder Hydraulic System
Oil Level Sensor (Power Train Oil Tank)
554 and 574 Forwarders Power Train
Oil Level Sensor (Hydraulic Tank)
554 Forwarder and 574 Forwarder Hydraulic System
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Service Letter-China
THE BREATHERS FOR THE HYDRAULIC OIL TANK MAY LEAK AND NEED TO BE REPLACED ON CERTAIN 554 AND 574 FORWARDERS
THE BREATHERS FOR THE HYDRAULIC OIL TANK MAY LEAK AND NEED TO BE REPLACED ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-Asia
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Kidney Looping Forwarder Power Train and Hydraulic Oil{0680, 0768, 3016, 5056}
Procedure for Kidney Looping Forwarder Power Train and Hydraulic Oil{0680, 0768, 3016, 5056}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Service Letter-APD
THE BREATHERS FOR THE HYDRAULIC OIL TANK MAY LEAK AND NEED TO BE REPLACED ON CERTAIN 554 AND 574 FORWARDERS
THE BREATHERS FOR THE HYDRAULIC OIL TANK MAY LEAK AND NEED TO BE REPLACED ON CERTAIN 554 AND 574 FORWARDERS
Disassembly and Assembly
Hydraulic Tank - Remove
554 Forwarder and 574 Forwarder Power Train
Hydraulic Tank - Install
554 Forwarder and 574 Forwarder Power Train
Hydraulic Tank - Install
554 Forwarder and 574 Forwarder Machine Systems
Hydraulic Tank Fill Pump and Motor - Remove and Install
554 Forwarder and 574 Forwarder Power Train
Hydraulic Tank - Remove
554 Forwarder and 574 Forwarder Machine Systems
Service Magazine
An Improved Breather Is Used on the Hydraulic Oil Tank of Forwarders {5056}
2001/04/02
New Adapter Assemblies Connect the Suction Adapters to the Hydraulic Tank for System Filtering {0738}
2004/03/29
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Kidney Looping Forwarder Power Train and Hydraulic Oil{0680, 0768, 3016, 5056}
Procedure for Kidney Looping Forwarder Power Train and Hydraulic Oil{0680, 0768, 3016, 5056}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
New Adapter Assemblies Connect the Suction Adapters to the Hydraulic Tank for System Filtering {0738}
2004/03/29
New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Specifications
Bogie Float Valve
554 Forwarder and 574 Forwarder Hydraulic System
Disassembly and Assembly
Bogie Float Valve - Remove
554 Forwarder and 574 Forwarder Machine Systems
Bogie Float Valve - Install
554 Forwarder and 574 Forwarder Machine Systems
Bogie Float Valve - Disassemble
554 Forwarder and 574 Forwarder Machine Systems
Bogie Float Valve - Assemble
554 Forwarder and 574 Forwarder Machine Systems
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Disassembly and Assembly
Brake Charging Valve - Remove and Install
554 Forwarder and 574 Forwarder Power Train
Specifications
Bypass Valve (Hydraulic Oil Cooler)
554 Forwarder and 574 Forwarder Hydraulic System
Disassembly and Assembly
Bogie Float Valve - Remove
554 Forwarder and 574 Forwarder Machine Systems
Bogie Float Valve - Install
554 Forwarder and 574 Forwarder Machine Systems
Bogie Float Valve - Disassemble
554 Forwarder and 574 Forwarder Machine Systems
Bogie Float Valve - Assemble
554 Forwarder and 574 Forwarder Machine Systems
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR ADDING A LINE RELIEF VALVE TO THE GATE CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
PRODUCT SUPPORT PROGRAM FOR ADDING A LINE RELIEF VALVE TO THE GATE CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Combination Valve (Ladder and Gate)
554 Forwarder and 574 Forwarder Hydraulic System
Combination Valve (Differential Lock and Parking Brake)
554 and 574 Forwarders Power Train
Combination Valve (Ladder and Gate)
554 Forwarder and 574 Forwarder Hydraulic System
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR ADDING A LINE RELIEF VALVE TO THE GATE CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
PRODUCT SUPPORT PROGRAM FOR ADDING A LINE RELIEF VALVE TO THE GATE CIRCUIT ON CERTAIN 554 AND 574 FORWARDERS
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Combination Valve (Ladder and Gate) - Test and Adjust
554 Forwarder and 574
Forwarder Hydraulic System
Combination Valve (Differential Lock and Parking Brake) - Test and Adjust
554 and 574 Forwarders Power Train
Relief Valve (Gate Cylinder) - Test and Adjust - Vertical
554 Forwarder and 574
Forwarder Hydraulic System
Disassembly and Assembly
Combination Valve (Four Function) - Remove
554 Forwarder and 574 Forwarder Machine Systems
Combination Valve (Four Function) - Install
554 Forwarder and 574 Forwarder Machine Systems
Combination Valve (Four Function) - Disassemble
554 Forwarder and 574 Forwarder Machine Systems
Combination Valve (Four Function) - Assemble
554 Forwarder and 574 Forwarder Machine Systems
Service Magazine
A New Bypass Valve Is Used on the Gate Cylinder of Forwarders {5064, 5117}
2002/01/28
Service Letter-NACD
Product Support Program For Replacing The Failed Solenoids For The Implement Control Valve On Certain 554 And 574 Forwarders And 550, 570 And 580 Harvesters
Product Support Program For Replacing The Failed Solenoids For The Implement Control Valve On Certain 554 And 574 Forwarders And 550, 570 And 580 Harvesters
Service Letter-CSARL
Service Letter-Americas
Specifications
Bank Valve (Two) (Bogie Lift)
554 Forwarder and 574 Forwarder Hydraulic System
Bank Valve (Eight) (Implement)
554 Forwarder and 574 Forwarder Hydraulic System
Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Bank Valve (Eight) (Implement)
554 Forwarder and 574 Forwarder Hydraulic System
Disassembly and Assembly
Bank Valve (Eight) (Implement) - Remove
554 Forwarder and 574 Forwarder Machine Systems
Bank Valve (Eight) (Implement) - Install
554 Forwarder and 574 Forwarder Machine Systems
Bank Valve (Two) (Bogie Lift) - Remove
554 Forwarder and 574 Forwarder Machine Systems
Bank Valve (Two) (Bogie Lift) - Install
554 Forwarder and 574 Forwarder Machine Systems
Bank Valve (Two) (Bogie Lift) - Disassemble
554 Forwarder and 574 Forwarder Machine Systems
Bank Valve (Two) (Bogie Lift) - Assemble
554 Forwarder and 574 Forwarder Machine Systems
Bank Valve (Eight) (Implement) - Assemble
554 Forwarder and 574 Forwarder Machine Systems
Bank Valve (Eight) (Implement) - Disassemble
554 Forwarder and 574 Forwarder Machine Systems
Service Magazine
Correction to a Part Number in the Specifications Manual of Forwarders {5051}
2000/09/04
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Specifications
Diverter Valve (Boom Tilt Cylinder and Gate Cylinder)
554 Forwarder and 574 Forwarder Hydraulic System
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Piston And Bladder Type Accumulators: Service Interval And Service Replacements {5077}
1999/09/27
Specifications
Pressure Reducing Valve (Steering Signal)
554 Forwarder and 574 Forwarder Hydraulic System
Pressure Reducing Valve (Maximum Signal)
554 Forwarder and 574 Forwarder Hydraulic System
Testing and Adjusting
Pressure Reducing Valve (Steering Signal) - Test and Adjust
554 Forwarder and 574
Forwarder Hydraulic System
Disassembly and Assembly
Pressure Reducing Valve (Steering Signal) - Remove
554 Forwarder and 574 Forwarder Machine Systems
Pressure Reducing Valve (Steering Signal) - Install
554 Forwarder and 574 Forwarder Machine Systems
Pressure Reducing Valve (Maximum Signal) - Remove
554 Forwarder and 574 Forwarder Machine Systems
Pressure Reducing Valve (Maximum Signal) - Install
554 Forwarder and 574 Forwarder Machine Systems
Pressure Reducing Valve (Steering Signal) - Disassemble
554 Forwarder and 574 Forwarder Machine Systems
Pressure Reducing Valve (Steering Signal) - Assemble
554 Forwarder and 574 Forwarder Machine Systems
Pressure Reducing Valve (Maximum Signal) - Disassemble
554 Forwarder and 574 Forwarder Machine Systems
Pressure Reducing Valve (Maximum Signal) - Assemble
554 Forwarder and 574 Forwarder Machine Systems
Specifications
Priority Valve (Steering)
554 Forwarder and 574 Forwarder Hydraulic System
Disassembly and Assembly
Priority Valve (Steering) - Remove
554 Forwarder and 574 Forwarder Machine Systems
Priority Valve (Steering) - Install
554 Forwarder and 574 Forwarder Machine Systems
Priority Valve (Steering) - Disassemble
554 Forwarder and 574 Forwarder Machine Systems
Priority Valve (Steering) - Assemble
554 Forwarder and 574 Forwarder Machine Systems
Specifications
Relief Valve (Swing Crossover)
554 Forwarder and 574 Forwarder Hydraulic System
Tool Operating Manual
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Testing and Adjusting
Relief Valve (Gate Cylinder) - Test and Adjust - Vertical
554 Forwarder and 574
Forwarder Hydraulic System
Disassembly and Assembly
Relief Valve (Swing Crossover) - Remove
554 Forwarder and 574 Forwarder Machine Systems
Relief Valve (Swing Crossover) - Install
554 Forwarder and 574 Forwarder Machine Systems
Relief Valve (Swing Crossover) - Disassemble
554 Forwarder and 574 Forwarder Machine Systems
Relief Valve (Swing Crossover) - Assemble
554 Forwarder and 574 Forwarder Machine Systems
Service Magazine
A New Bypass Valve Is Used on the Gate Cylinder of Forwarders {5064, 5117}
2002/01/28
Service Letter-NACD
A Shuttle Valve Needs To Be Added To The Load Sensing System On Certain 574 Forwarders
A Shuttle Valve Needs To Be Added To The Load Sensing System On Certain 574 Forwarders
Service Letter-CSARL
Service Letter-Americas
Service Letter-NACD
Product Support Program For Replacing The Failed Solenoids For The Implement Control Valve On Certain 554 And 574 Forwarders And 550, 570 And 580 Harvesters
Product Support Program For Replacing The Failed Solenoids For The Implement Control Valve On Certain 554 And 574 Forwarders And 550, 570 And 580 Harvesters
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Pressure Washing May Cause Solenoid Failure
Pressure Washing May Cause Solenoid Failure
Specifications
Solenoid Valve (Oscillation Lock)
554 Forwarder and 574 Forwarder Hydraulic System
Solenoid Valve (Cold Start)
554 and 574 Forwarders Power Train
Service Magazine
New Solenoid Valve (Cold Start) Used {5050,5479}
1999/11/08
A Guard is Now Used to Prevent Damage to the Oscillation Lock Valve {5057, 5479}
2003/04/14
A New Coil Assembly is Now Used {5479}
2009/02/09
Disassembly and Assembly
Priority Valve (Steering) - Remove
554 Forwarder and 574 Forwarder Machine Systems
Priority Valve (Steering) - Install
554 Forwarder and 574 Forwarder Machine Systems
Priority Valve (Steering) - Disassemble
554 Forwarder and 574 Forwarder Machine Systems
Priority Valve (Steering) - Assemble
554 Forwarder and 574 Forwarder Machine Systems
Service Magazine
Piston And Bladder Type Accumulators: Service Interval And Service Replacements {5077}
1999/09/27
Specifications
Bogie Float Valve
554 Forwarder and 574 Forwarder Hydraulic System
Special Instruction
Installation Procedure for New 190-3692 Pressure Sensor {1408, 3016}
Installation Procedure for New 190-3692 Pressure Sensor {1408, 3016}
Service Letter-NACD
The Pressure Sensors Fail Prematurely Due To Vibration And Moisture On Certain 554 And 574 Forwarders
The Pressure Sensors Fail Prematurely Due To Vibration And Moisture On Certain 554 And 574 Forwarders
Service Letter-CSARL
Service Letter-Americas
Specifications
Pressure Sensor (Gearshift)
554 and 574 Forwarders Power Train
Pressure Sensor (Power Train Charging System)
554 and 574 Forwarders Power Train
Pressure Sensor (Drive Loop)
554 and 574 Forwarders Power Train
Service Magazine
A Guard is Now Used to Prevent Damage to the Oscillation Lock Valve {5057, 5479}
2003/04/14

Truck sale:

Caterpillar 574, Forestry Equipment
159,500 
Caterpillar 574, Forestry Equipment
- forwarder
MICHIGAN CAT
CATERPILLAR 574 2013
 
CATERPILLAR 574 2013
- FORESTRY - FORWARDER
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR 574 2014
 
CATERPILLAR 574 2014
- FORESTRY - FORWARDER
HEWITT EQUIPMENT
CATERPILLAR 574 2016
$321,752 USD 
CATERPILLAR 574 2016
- FORESTRY - FORWARDER
ZEPPELIN POWER SYSTEMS
>
2000 CAT 574
USD $56,283 
2000 CAT 574

chr47
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.