AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

Custom Product Support Literature for the 988G Wheel Loader 2TW00001-UP (MACHINE) WORK TOOLS Caterpillar SIS



WHEEL LOADER 988G WHEEL LOADER 2TW
 Custom Product Support Literature for the 988G Wheel Loader 2TW00001-UP (MACHINE) SEBC1318 988G 2TW   (1999)

Parts group 988G:

  For full view, you need register
WORK TOOLS
HANDLER GP-BLOCK
2Q-8461 HANDLER AR-BLOCK
2Q-8461 HANDLER AR-BLOCK -HIGH ROTATION LINKAGE
S/N BNH1-UP
CUSTOM

Information:

(For parts list, see above)

Operation and Maintenance Manual
Bucket Stops - Inspect/Replace
988G Wheel Loader
Bucket Rated Load
988G Wheel Loader
Special Instruction
Rework Procedure for Dump Stops{6001}
Rework Procedure for Dump Stops{6001}
Inspection of Slag Buckets{6110}
Inspection of Slag Buckets{6110}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
Repair Procedure for Cracks on the Paddle Plate of the Rock Bucket on 988G and 988H Wheel Loaders{6102}
Repair Procedure for Cracks on the Paddle Plate of the Rock Bucket on 988G and 988H Wheel Loaders{6102}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Installing CapSure Bucket Sidebar Protectors {6102, 6817}
Installing CapSure Bucket Sidebar Protectors {6102, 6817}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure to Install Mechanically Attached Sidebar Protectors on Loader Bucket with Straight Sidebars for Certain (972 - 994) Wheel Loaders {6001, 6101, 6102, 6104, 6817}
Procedure to Install Mechanically Attached Sidebar Protectors on Loader Bucket with Straight Sidebars for Certain (972 - 994) Wheel Loaders {6001, 6101, 6102, 6104, 6817}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Technical Information Bulletin
DAMAGED OR LOST 184-9866 BUCKET DUMP STOP ASSEMBLIES REQUIRE REPLACEMENT AND RECALIBRATION OF THE TILT LINKAGE POSITION SENSOR.
DAMAGED OR LOST 184-9866 BUCKET DUMP STOP ASSEMBLIES REQUIRE REPLACEMENT AND RECALIBRATION OF THE TILT LINKAGE POSITION SENSOR.
The Pins for the Sidebar Bend or Break
The Pins for the Sidebar Bend or Break
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Maintenance Free Linkage Seals - Install
988G Wheel Loader Machine Systems
Bucket - Remove
988G Wheel Loader Machine Systems
Bucket - Install
988G Wheel Loader Machine Systems
Service Magazine
Correction to Disassembly and Assembly , "Bucket-Install" {0645, 6101, 6102}
2001/10/29
New Triten Bucket Wear Plates Are Available {6120}
2005/01/10
Hardened Inserts Are Now Available for the Bucket Pin Bores {6107, 6109}
2005/01/31
Repair Procedure for Damaged Spillguards on Wheel Loader Buckets {6101, 6102, 7000}
2007/04/23
Improved K110 Adapters are now available for Wheel Loaders and Excavators {6800}
2008/08/25
Improved Lower Pin Joint for Bucket {6107, 6108, 6109, 6118}
2008/08/25
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
Procedures are Available for Replacing Base Edge Assemblies, Repairing Adapter Weld, and Edge Assembly Cracks on Large Wheel Loader Buckets {6101, 6102, 6131, 6132, 6801, 6818}
2010/08/02
Rock Buckets are Improved for Certain 988G and 988H Wheel Loaders {6102}
2010/11/11
Wheel Loader Bucket Lifting Point Color Change {6001, 6101, 6102, 6104, 6110, 6131, 6132, 6529, 6531, 6704}
2011/02/24
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
Special Instruction
Installation Procedure of the 210-1704 Front Lines Gp {5051, 5057, 6129}
Installation Procedure of the 210-1704 Front Lines Gp {5051, 5057, 6129}
Technical Information Bulletin
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Technical Information Bulletin
Repair Procedure for Frame Gussets On 988G Log and Lumber Forks{6114, 7000}
Repair Procedure for Frame Gussets On 988G Log and Lumber Forks{6114, 7000}
Operation and Maintenance Manual
Bucket Cutting Edges - Inspect/Replace
988G Wheel Loader
Bucket Wear Plates - Inspect/Replace
988G Wheel Loader
Bucket Tips - Inspect/Replace
988G Wheel Loader
Special Instruction
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the &quot;K Series&quot; Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Technical Information Bulletin
The Pins for the Sidebar Bend or Break
The Pins for the Sidebar Bend or Break
Specifications
Ground Engaging Tool Torques
988G Wheel Loader Electrohydraulic System
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23
New Wear Plates are Available {6820}
2002/03/18
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Welding Recommendations for the Large Bucket Ground Engaging Tools {0751}
2003/12/15
Correction to Operation and Maintenance Manual , "Bucket Tips - Inspect/Replace" {6805}
2004/04/19
New Triten Bucket Wear Plates Are Available {6120}
2005/01/10
Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2005/08/01
Replace Bucket Pins and Pin Retainers More Frequently in Limestone Applications {0751}
2006/07/31
K110 Tip and Retention Improvement {6803, 6805}
2008/05/26
Improved K110 Adapters are now available for Wheel Loaders and Excavators {6800}
2008/08/25
K Series Bucket Tip Slag Retainers For High Temperature Applications are Available {6805}
2009/01/26
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
Bevel of 25 &deg; for the Base Edge With the Replacement of Abrasion Adapters {6803}
2010/01/08
A Slag Retainer is available for K170 Bucket Tip Retention Systems {6110, 6803, 6805}
2010/07/14
Procedures are Available for Replacing Base Edge Assemblies, Repairing Adapter Weld, and Edge Assembly Cracks on Large Wheel Loader Buckets {6101, 6102, 6131, 6132, 6801, 6818}
2010/08/02
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
Special Instruction
Procedure to Install Mechanically Attached Sidebar Protectors on Loader Bucket with Straight Sidebars for Certain (972 - 994) Wheel Loaders {6001, 6101, 6102, 6104, 6817}
Procedure to Install Mechanically Attached Sidebar Protectors on Loader Bucket with Straight Sidebars for Certain (972 - 994) Wheel Loaders {6001, 6101, 6102, 6104, 6817}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Service Magazine
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}

Truck sale:

Caterpillar 988G
 
Caterpillar 988G
- Wheel Loaders
FINANZAUTO S.A.
 
69,000 
Caterpillar 988G, Wheel Loaders, Construction
- Wheel Loaders
FABICK CAT
Caterpillar 988G/H HIGH LIFT CYLINDER AND BUCKET, bucket, Construction
 
Caterpillar 988G/H HIGH LIFT CYLINDER AND BUCKET, bucket, Construction
- bucket
WILLIAM ADAMS PTY. LTD.
Caterpillar 988G/H, bucket, Construction
 
Caterpillar 988G/H, bucket, Construction
- bucket
WILLIAM ADAMS PTY. LTD.
Caterpillar 988G, Wheel Loaders, Construction
72,000 
Caterpillar 988G, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.