2Q-8448 CONVERSION AR-MACHINE S/N BNH1-UP; 2TW1-UP 3.6-M BOOM. CUSTOM CANNOT BE USED WITH 2Q-8388 LIFT AR, 2Q-8389 LIFT AR 988G

Part No	Qty	Parts name
186-4853	[1]	BLOCK AS-STOP
186-4852	[2]	BLOCK
189-7560 Y	[1]	BUMPER GP-REAR
189-7461 Y	[1]	CONTROL AR-BUCKET
189-7571 Y	[1]	COUNTERWEIGHT GP
Y	[1]	GUARD GP-HYDRAULIC TANK
189-7862 Y	[1]	GUARD GP-OIL LEVEL GAUGE (TRANSMISSION)(SIGHT GAUGE)
189-7634 Y	[1]	LINES GP-BRAKE
172-8876 Y	[1]	LINES GP-FRONT
174-4682 Y	[1]	LINES GP-LIFT CYLINDER
Y	[1]	LINES GP-TILT CYLINDER
189-7693	[1]	PLUG AS
186-3736	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8T-8737	[6]	PLUG-SEAL
227-3218	[1]	STOP GP-STEERING
146-6581 M	[2]	BOLT-FLAT HEAD (M12X1.75X72-MM)
154-0351	[1]	PLATE AS
8T-4244 M	[1]	NUT (M12X1.75-THD)
208-0545 Y	[1]	SWITCH GP-ROCKER (TORQUE CONVERTER LOCKUP CLUTCH)
188-0670 Y	[1]	TORQUE CONVERTER & HOUSING GP (FREEWHEEL STATOR, LOCKUP)
187-8133 Y	[1]	TRANSMISSION AR
		S/N CGS557-UP
164-4856 Y	[1]	VALVE & MTG GP-LOCKUP CLUTCH
137-1769 Y	[1]	VALVE & MTG GP-MAIN CONTROL (3-FUNCTION, LOGGING)
173-5898 JY	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
114-5194 Y	[1]	WIRING GP-SENSOR (LIFT, TILT POSITION)

		***STANDARD REMOVAL***
114-5129 L	[1]	BUMPER GP-REAR
114-5196 L	[1]	CONTROL GP-BUCKET
L	[1]	GUARD GP-HYDRAULIC TANK
132-6136 N	[1]	LINES GP-LIFT CYLINDER
156-5519 N	[1]	LINES GP-TILT CYLINDER (CYLINDER MOUNTED)
177-1439 P	[1]	PLUG AS
154-0350 V	[1]	STOP GP-STEERING
192-2914 T	[1]	TRANSMISSION AR
200-0866 S	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
141-8719 U	[1]	WIRING GP-SENSOR (HIGH LIFT MACHINES)

		***ATTACHMENT REMOVAL***
201-1049 W	[1]	ARM & BEARING AS-LIFT (4.25-M)
201-0377 W	[1]	LINES GP-FRONT
145-4225	[1]	TORQUE CONVERTER AR-LOCKUP
201-0218 W	[1]	VALVE & MTG GP-MAIN CONTROL (3-FUNCTION)


		AVAILABLE REPAIR KIT(S):
117-7799 J	[1]	KIT-SEAL (BRAKE VALVE)
J		PART MARKED J INCLUDES KIT MARKED J
L		PART OF STANDARD CHASSIS AR
M		METRIC PART
N		PART OF STANDARD HYDRAULIC AR
P		PART OF STANDARD PANEL GP-INSTRUMENT
R		REMANUFACTURED PART MAY BE AVAILABLE
S		PART OF STANDARD CONTROL GP-BRAKE
T		PART OF STANDARD POWER TRAIN AR
U		PART OF STANDARD ELECTRICAL AR
V		PART OF STANDARD LINES GP-STEERING NEUTRALIZER
W		PART OF ATTACHMENT HYDRAULIC AR-3 VALVE
Y		SEPARATE ILLUSTRATION

#SEBC13180002

2Q-8449: CONVERSION AR-MACHINE

CONVERSION AR-MACHINE

2Q-8449 CONVERSION AR-MACHINE
S/N BNH1-UP; 2TW1-UP
3.6-M BOOM. CUSTOM
CANNOT BE USED WITH 2Q-8388 LIFT AR, 2Q-8389 LIFT AR

i01529047 SEBC1318

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
189-7461 Y	[1]	CONTROL AR-BUCKET
189-7560 Y	[1]	BUMPER GP-REAR
189-7520 Y	[1]	COUNTERWEIGHT GP
Y	[1]	GUARD GP-HYDRAULIC TANK
189-7862 Y	[1]	GUARD GP-OIL LEVEL GAUGE (TRANSMISSION)
172-8876 Y	[1]	LINES GP-FRONT
174-4682 Y	[1]	LINES GP-LIFT CYLINDER
189-7634 Y	[1]	LINES GP-BRAKE
Y	[1]	LINES GP-TILT CYLINDER
137-1769 Y	[1]	VALVE & MTG GP-MAIN CONTROL (3-FUNCTION, LOGGING)
173-5898 JY	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
114-5194 Y	[1]	WIRING GP-SENSOR (LIFT, TILT POSITION)
189-7694	[1]	PLUG AS
186-3736	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8T-8737	[6]	PLUG-SEAL
227-3218	[1]	STOP GP-STEERING
146-6581 M	[2]	BOLT-FLAT HEAD (M12X1.75X72-MM)
154-0351	[1]	PLATE AS
8T-4244 M	[2]	NUT (M12X1.75-THD)

		***STANDARD REMOVAL***
114-5129 L	[1]	BUMPER GP-REAR
114-5196 L	[1]	CONTROL GP-BUCKET
L	[1]	GUARD GP-HYDRAULIC TANK
132-6136 N	[1]	LINES GP-LIFT CYLINDER
156-5519 N	[1]	LINES GP-TILT CYLINDER (CYLINDER MOUNTED)
177-1439 P	[1]	PLUG AS
154-0350 U	[1]	STOP GP-STEERING
200-0866 S	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
141-8719 T	[1]	WIRING GP-SENSOR (HIGH LIFT MACHINES)

		***ATTACHMENT REMOVAL***
201-1049 V	[1]	ARM & BEARING AS-LIFT (4.25-M)
201-0377 V	[1]	LINES GP-FRONT


		AVAILABLE REPAIR KIT(S):
117-7799 J	[1]	KIT-SEAL (BRAKE VALVE)
J		PART MARKED J INCLUDES KIT MARKED J
L		PART OF STANDARD CHASSIS AR
M		METRIC PART
N		PART OF STANDARD HYDRAULIC AR
P		PART OF STANDARD PANEL GP-INSTRUMENT
S		PART OF STANDARD CONTROL GP-BRAKE
T		PART OF STANDARD ELECTRICAL AR
U		PART OF STANDARD LINES GP-STEERING NEUTRALIZER
V		PART OF ATTACHMENT HYDRAULIC AR-3 VALVE
Y		SEPARATE ILLUSTRATION

#SEBC13180003

2Q-8450: CONVERSION AR-MACHINE

CONVERSION AR-MACHINE

2Q-8450 CONVERSION AR-MACHINE -3-VALVE
S/N BNH1-UP; 2TW1-UP
3.6-M BOOM. CUSTOM

i01529726 SEBC1318

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
186-4852	[1]	BLOCK
189-7560 Y	[1]	BUMPER GP-REAR
189-7461 Y	[1]	CONTROL AR-BUCKET
189-7520 Y	[1]	COUNTERWEIGHT GP
201-5550	[1]	FILM (988G BLOCK HANDLER,LH)
201-7805	[1]	FILM (988G BLOCK HANDLER,RH)
189-7634 Y	[1]	LINES GP-BRAKE
172-8876 Y	[1]	LINES GP-FRONT
174-4682 Y	[1]	LINES GP-LIFT CYLINDER
Y	[1]	LINES GP-TILT CYLINDER
189-7695	[1]	PLUG AS
186-3736	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8T-8737	[6]	PLUG-SEAL
208-0545 Y	[1]	SWITCH GP-ROCKER (TORQUE CONVERTER LOCKUP CLUTCH)
188-0670 Y	[1]	TORQUE CONVERTER & HOUSING GP (FREEWHEEL STATOR, LOCKUP)
227-3218	[1]	STOP GP-STEERING
146-6581 M	[2]	BOLT-FLAT HEAD (M12X1.75X72-MM)
154-0351	[1]	PLATE AS
8T-4244 M	[2]	NUT (M12X1.75-THD)
187-8133 Y	[1]	TRANSMISSION AR
		S/N CGS557-UP
164-4856 Y	[1]	VALVE & MTG GP-LOCKUP CLUTCH
173-5898 JY	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
114-5194 Y	[1]	WIRING GP-SENSOR (LIFT, TILT POSITION)

		***STANDARD REMOVAL***
114-5129 L	[1]	BUMPER GP-REAR
114-5196 L	[1]	CONTROL GP-BUCKET
171-6692 U	[1]	FILM-STRIPE (988G, LH)
171-6693 U	[1]	FILM-STRIPE (988G, RH)
132-6136 N	[1]	LINES GP-LIFT CYLINDER
156-5519 N	[1]	LINES GP-TILT CYLINDER (CYLINDER MOUNTED)
177-1439 P	[1]	PLUG AS
154-0350 W	[1]	STOP GP-STEERING
192-2914 S	[1]	TRANSMISSION AR
200-0866 T	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
141-8719 V	[1]	WIRING GP-SENSOR (HIGH LIFT MACHINES)

		***ATTACHMENT REMOVAL***
201-1049 X	[1]	ARM & BEARING AS-LIFT (4.25-M)
201-0377 X	[1]	LINES GP-FRONT
145-4225	[1]	TORQUE CONVERTER AR-LOCKUP


		AVAILABLE REPAIR KIT(S):
117-7799 J	[1]	KIT-SEAL (BRAKE VALVE)
J		PART MARKED J INCLUDES KIT MARKED J
L		PART OF STANDARD CHASSIS AR
M		METRIC PART
N		PART OF STANDARD HYDRAULIC AR
P		PART OF STANDARD PANEL GP-INSTRUMENT
R		REMANUFACTURED PART MAY BE AVAILABLE
S		PART OF STANDARD POWER TRAIN AR
T		PART OF STANDARD CONTROL GP-BRAKE
U		PART OF STANDARD FILM GP
V		PART OF STANDARD ELECTRICAL AR
W		PART OF STANDARD LINES GP-STEERING NEUTRALIZER
X		PART OF ATTACHMENT HYDRAULIC AR-3 VALVE
Y		SEPARATE ILLUSTRATION

#SEBC13180004

2Q-8451: CONVERSION AR-MACHINE

CONVERSION AR-MACHINE

2Q-8451 CONVERSION AR-MACHINE -2-VALVE
S/N BNH1-UP; 2TW1-UP
3.6-M BOOM. CUSTOM
FOR USE WITH 145-4225 TORQUE CONVERTER AR-LOCKUP, 183-3850 ENGINE AR, 201-0837 HYDRAULIC AR-2 VALVE
CANNOT BE USED WITH 2Q-8448 CONVERSION AR-LOGGING, 2Q-8449 CONVERSION AR-LOGGING, 2Q-8450 CONVERSION AR-BLOCK HANDLING, 201-0808 HYDRAULIC AR-3 VALVE

i01529876 SEBC1318

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
186-4852	[1]	BLOCK
189-7560 Y	[1]	BUMPER GP-REAR
189-7461 Y	[1]	CONTROL AR-BUCKET
189-7520 Y	[1]	COUNTERWEIGHT GP
201-5550	[1]	FILM (988G BLOCK HANDLER,LH)
201-7805	[1]	FILM (988G BLOCK HANDLER,RH)
189-7634 Y	[1]	LINES GP-BRAKE
174-4682 Y	[1]	LINES GP-LIFT CYLINDER
Y	[1]	LINES GP-TILT CYLINDER
189-7695	[1]	PLUG AS
186-3736	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8T-8737	[6]	PLUG-SEAL
227-3218	[1]	STOP GP-STEERING
146-6581 M	[2]	BOLT-FLAT HEAD (M12X1.75X72-MM)
154-0351	[1]	PLATE AS
8T-4244 M	[2]	NUT (M12X1.75-THD)
208-0545 Y	[1]	SWITCH GP-ROCKER (TORQUE CONVERTER LOCKUP CLUTCH)
188-0670 Y	[1]	TORQUE CONVERTER & HOUSING GP (FREEWHEEL STATOR, LOCKUP)
187-8133 Y	[1]	TRANSMISSION AR
		S/N CGS557-UP
164-4856 Y	[1]	VALVE & MTG GP-LOCKUP CLUTCH
173-5898 JY	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
114-5194 Y	[1]	WIRING GP-SENSOR (LIFT, TILT POSITION)

		***STANDARD REMOVAL***
114-5129 L	[1]	BUMPER GP-REAR
114-5196 L	[1]	CONTROL GP-BUCKET
171-6692 S	[1]	FILM-STRIPE (988G, LH)
171-6693 S	[1]	FILM-STRIPE (988G, RH)
132-6136 N	[1]	LINES GP-LIFT CYLINDER
156-5519 N	[1]	LINES GP-TILT CYLINDER (CYLINDER MOUNTED)
177-1439 P	[1]	PLUG AS
154-0350 V	[1]	STOP GP-STEERING
192-2914 T	[1]	TRANSMISSION AR
200-0866 N	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
141-8719 U	[1]	WIRING GP-SENSOR (HIGH LIFT MACHINES)

		***ATTACHMENT REMOVAL***
231-8177 W	[1]	ARM & BEARING AS-LIFT
145-4225	[1]	TORQUE CONVERTER AR-LOCKUP


		AVAILABLE REPAIR KIT(S):
J		KIT-SEAL (BRAKE VALVE)
J		PART MARKED J INCLUDES KIT MARKED J
L		PART OF STANDARD CHASSIS AR
M		METRIC PART
N		PART OF STANDARD HYDRAULIC AR
P		PART OF STANDARD PANEL GP-INSTRUMENT
R		REMANUFACTURED PART MAY BE AVAILABLE
S		PART OF STANDARD FILM GP
T		PART OF STANDARD POWER TRAIN AR
U		PART OF STANDARD ELECTRICAL AR
V		PART OF STANDARD LINES GP-STEERING NEUTRALIZER
W		PART OF ATTACHMENT HYDRAULIC AR-2 VALVE
Y		SEPARATE ILLUSTRATION

#SEBC13180005

2Q-7750: STEEL MILL AR

STEEL MILL AR

2Q-7750 STEEL MILL AR -3-VALVE
S/N BNH1-UP
3.6-M BOOM. CUSTOM

i01928342 SEBC1318

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
175-2852 Y	[1]	AIR CLEANER GP
189-7461 Y	[1]	CONTROL AR-BUCKET
189-7560 Y	[1]	BUMPER GP-REAR
189-7817 Y	[1]	CAB AR (STEEL MILL MACHINE)
189-7465 Y	[1]	CONTROL GP-PARKING BRAKE (AUXILIARY RELEASE OVERRIDE)
189-7520 Y	[1]	COUNTERWEIGHT GP
221-7967 Y	[1]	FRAME AS-LOADER
189-7590 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (TRANSMISSION)
168-6464 Y	[1]	GUARD AR-STEERING CYLINDER
219-5031 Y	[1]	GUARD GP-BOTTOM
189-7360 Y	[1]	GUARD GP-CAB
189-7471 Y	[1]	GUARD GP-FUEL & HYDRAULIC TANK
222-3757 Y	[1]	CONVERSION GP-HYDRAULIC LINES
189-7336 Y	[1]	SENSOR & MTG GP-TILT POSITION (WITH GUARDS)
189-7673 Y	[1]	HARDWARE GP-CHASSIS
219-5029 Y	[1]	HARDWARE GP-LOADER FRAME
189-7849 Y	[1]	HARDWARE GP-LOADER FRAME (MAIN CONTROL VALVE)
189-7359 Y	[1]	HARDWARE GP-REAR FRAME
172-8876 Y	[1]	LINES GP-FRONT
174-4682 Y	[1]	LINES GP-LIFT CYLINDER
189-7634 Y	[1]	LINES GP-BRAKE
Y	[1]	LINES GP-TILT CYLINDER
189-7312 Y	[1]	STEP GP
208-0545 Y	[1]	SWITCH GP-ROCKER (TORQUE CONVERTER LOCKUP CLUTCH)
188-0670 Y	[1]	TORQUE CONVERTER & HOUSING GP (FREEWHEEL STATOR, LOCKUP)
187-8133 Y	[1]	TRANSMISSION AR
164-4856 Y	[1]	VALVE & MTG GP-LOCKUP CLUTCH
173-5898 Y	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
186-4852	[2]	BLOCK
202-1425	[1]	FILM (988G, STEEL MILL, LH)
202-1426	[1]	FILM (988G, STEEL MILL, RH)
189-7695	[1]	PLUG AS

		***STANDARD REMOVAL***
132-6248 J	[1]	AIR CLEANER GP
171-6692 N	[1]	FILM-STRIPE (988G, LH)
171-6693 N	[1]	FILM-STRIPE (988G, RH)
114-5129 L	[1]	BUMPER GP-REAR
114-5196 L	[1]	CONTROL GP-BUCKET
132-6136 O	[1]	LINES GP-LIFT CYLINDER
156-5519 O	[1]	LINES GP-TILT CYLINDER (CYLINDER MOUNTED)
177-1439 P	[1]	PLUG AS
192-2914 S	[1]	TRANSMISSION AR
200-0866 T	[1]	VALVE GP-BRAKE CONTROL (SERVICE)
169-3302 Q	[1]	SENSOR & MTG GP-TILT POSITION

		***ATTACHMENT REMOVAL***
145-4225	[1]	TORQUE CONVERTER AR-LOCKUP
171-6024 V	[1]	FLAP
201-0377 U	[1]	LINES GP-FRONT
201-1049 U	[1]	ARM & BEARING AS-LIFT (4.25-M)
J		PART OF STANDARD INSTALLATION AR-ENGINE
L		PART OF STANDARD CHASSIS AR
N		PART OF STANDARD FILM GP
O		PART OF STANDARD HYDRAULIC AR
P		PART OF STANDARD PANEL GP-INSTRUMENT
Q		PART OF STANDARD CONTROL GP-LIFT & TILT POS
R		REMANUFACTURED PART MAY BE AVAILABLE
S		PART OF STANDARD POWER TRAIN AR
T		PART OF STANDARD CONTROL GP-SERVICE BRAKE
U		PART OF ATTACHMENT HYDRAULIC AR-3 VALVE
V		PART OF ATTACHMENT GUARD GP-REAR
Y		SEPARATE ILLUSTRATION

#SEBC13180006

2Q-8533: STEEL MILL AR

STEEL MILL AR

2Q-8533 STEEL MILL AR
S/N BNH1-UP
CUSTOM
CANNOT BE USED WITH 2Q-8483 CAB AR, 2Q-8486 GUARD GP-LOADER FRAME

i01899265 SEBC1318

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
175-2852 Y	[1]	AIR CLEANER GP
227-3217 Y	[1]	CAB AR (STEEL MILL MACHINE)
189-7465 Y	[1]	CONTROL GP-PARKING BRAKE (AUXILIARY RELEASE OVERRIDE)
189-7828 Y	[1]	CONTROL GP-XMSN OVERRIDE
228-7908 Y	[1]	CYLINDER GP-LIFT & TILT (POSITION SENSOR)
243-5935 Y	[1]	ELECTRONICS GP-IMPLEMENT
189-7779 Y	[1]	ELECTRONICS GP-POWER TRAIN
189-7590 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (TRANSMISSION)
168-6464 Y	[1]	GUARD AR-STEERING CYLINDER
219-5031 Y	[1]	GUARD GP-BOTTOM
189-7360 Y	[1]	GUARD GP-CAB
189-7471 Y	[1]	GUARD GP-FUEL & HYDRAULIC TANK
227-3317 Y	[1]	CONVERSION GP-HYDRAULIC LINES
189-7673 Y	[1]	HARDWARE GP-CHASSIS
219-5029 Y	[1]	HARDWARE GP-LOADER FRAME
189-7359 Y	[1]	HARDWARE GP-REAR FRAME
189-7312 Y	[1]	STEP GP
Y	[1]	TRANSMISSION AR
202-1425	[1]	FILM (988G, STEEL MILL, LH)
202-1426	[1]	FILM (988G, STEEL MILL, RH)
143-9772	[1]	PLUG AS

		***STANDARD REMOVAL***
132-6248 J	[1]	AIR CLEANER GP
114-5192 L	[1]	CONTROL GP-LIFT & TILT POS
243-4105 L	[1]	ELECTRONICS GP-IMPLEMENT
171-6692 N	[1]	FILM-STRIPE (988G, LH)
171-6693 N	[1]	FILM-STRIPE (988G, RH)
177-1439 T	[1]	PLUG AS
192-2914 P	[1]	TRANSMISSION AR
141-8719 L	[1]	WIRING GP-SENSOR (HIGH LIFT MACHINES)

		***ATTACHMENT REMOVAL***
171-6024 S	[1]	FLAP
J		PART OF STANDARD INSTALLATION AR-ENGINE
L		PART OF STANDARD ELECTRICAL AR
N		PART OF STANDARD FILM GP
P		PART OF STANDARD POWER TRAIN AR
R		REMANUFACTURED PART MAY BE AVAILABLE
S		PART OF ATTACHMENT GUARD GP-REAR
T		PART OF STANDARD PANEL GP-INSTRUMENT
Y		SEPARATE ILLUSTRATION

#SEBC13180007

2Q-8555: WASTE HANDLING AR

WASTE HANDLING AR

2Q-8555 WASTE HANDLING AR
S/N BNH1-UP
CUSTOM
CANNOT BE USED WITH 194-3715 ROOF GP-CAB, 164-4871 SUPPRESSION AR-SOUND

i01982736 SEBC1318

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
189-7817 Y	[1]	CAB AR (STEEL MILL MACHINE)
198-8528	[2]	FILM-STRIPE (WASTE HANDLER)
168-6464 Y	[1]	GUARD AR-STEERING CYLINDER
189-7852	[1]	GUARD AS-POWER TRAIN (POWER TRAIN)
189-7862 Y	[1]	GUARD GP-OIL LEVEL GAUGE (TRANSMISSION)
219-5031 Y	[1]	GUARD GP-BOTTOM
189-7360 Y	[1]	GUARD GP-CAB
150-1541 Y	[1]	GUARD GP-CRANKCASE
189-7471 Y	[1]	GUARD GP-FUEL & HYDRAULIC TANK
2Q-8552 Y	[1]	GUARD GP-CONTROL VALVE
189-7673 Y	[1]	HARDWARE GP-CHASSIS
219-5029 Y	[1]	HARDWARE GP-LOADER FRAME
189-7359 Y	[1]	HARDWARE GP-REAR FRAME
189-7722	[1]	PLATE
		(USE WITH ATTACHMENT LADDER)

		***STANDARD REMOVAL***
171-6024 J	[1]	FLAP
132-7488 L	[1]	GUARD AS
J		PART OF STANDARD GUARD GP-REAR
L		PART OF STANDARD GUARD GP-POWER TRAIN
Y		SEPARATE ILLUSTRATION

#SEBC13180008

185-1933: PANEL GP-SOUND SUPPRESSION

PANEL GP-SOUND SUPPRESSION

185-1933 PANEL GP-SOUND SUPPRESSION
S/N BNH1-UP
ENGINE OIL PAN
PART OF 2Q-8412, 2Q-8561 SUPPRESSION AR-SOUND

i01277498 SEBC1318

1851933 PANEL GP-SOUND SUPPRESSION Parts scheme

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	162-8617	[1]	PANEL AS
2.	162-8619	[1]	PANEL AS
			(EACH PANEL AS INCLUDES)
	9N-6108	[2]	SPRING
3.	185-2192	[1]	PANEL AS
	9N-6108	[6]	SPRING
4.	0S-1619	[10]	BOLT (3/8-16X3-IN)
5.	5M-2894	[10]	WASHER-HARD (10.2X18.5X2.5-MM THK)

#SEBC13180009

189-7590: GAUGE GP-OIL LEVEL (DIPSTICK)

GAUGE GP-OIL LEVEL (DIPSTICK)

189-7590 GAUGE GP-OIL LEVEL (DIPSTICK) -TRANSMISSION
S/N BNH1-UP
PART OF 2Q-7750, 2Q-8533 STEEL MILL AR
Type 1

i01911959 SEBC1318

1897590 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme

For full view, you need register

Parts for your 988G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8R-5144	[1]	WASHER (12X30X9-MM THK)
2.	189-7157	[1]	HOSE AS
3.	189-7592	[1]	GAUGE AS
4.	189-7593	[1]	TUBE AS
5.	189-7594	[1]	PLATE
6.	189-7595	[1]	BRACKET
7.	162-3052	[1]	ELBOW AS
	6V-8397	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
	8T-0130	[1]	ELBOW
8.	4B-0418	[2]	CLIP
9.	5M-6213	[1]	PLUG-PIPE
10.	6V-9168	[1]	NUT (11/16-16-THD)
11.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4133 M	[2]	NUT (M10X1.5-THD)
13.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
14.	8T-4183 M	[1]	BOLT (M12X1.75X40-MM)
15.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
16.	6V-1889	[1]	CLIP (LOOP)
17.	148-8371	[1]	ELBOW AS
	6V-8397	[1]	SEAL-O-RING
	8C-8988	[1]	ELBOW
	M		METRIC PART

Information:

MACHINE ARRANGEMENT

MACHINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Special Instruction

General Welding Procedures {0679, 7000}
General Welding Procedures {0679, 7000}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of G610 Hardware for Cat^® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}

Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat^® and Non-Cat Equipment {4203, 7490}

Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat^® and Non-Cat Equipment {7606}

Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat^® and Non-Cat Products {7600, 7610, 7620}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

988G/H Uncommanded Implement Lift at Start-Up in Cold Ambient Conditions 10° C (50° F) or Below{5000, 6000, 7000}
988G/H Uncommanded Implement Lift at Start-Up in Cold Ambient Conditions 10° C (50° F) or Below{5000, 6000, 7000}

Tool Operating Manual

439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

Service Intervals
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Service Letter-APD

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565}

Service Magazine

New Flywheel Housing Gasket For 3406 Machine Engines{1157}
1999/03/01

Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2011/03/22

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

A New Retrofit Cab is Now Available for 988G Wheel Loaders {7000, 7301}
2012/01/20

An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 988G :

2Q-8449 CONVERSION AR-MACHINE

2Q-8450 CONVERSION AR-MACHINE

2Q-8451 CONVERSION AR-MACHINE

2Q-7750 STEEL MILL AR

2Q-8533 STEEL MILL AR

2Q-8555 WASTE HANDLING AR

185-1933 PANEL GP-SOUND SUPPRESSION

189-7590 GAUGE GP-OIL LEVEL (DIPSTICK)

Truck sale:

Caterpillar 988G
- Wheel Loaders
FINANZAUTO S.A.

69,000

Caterpillar 988G, Wheel Loaders, Construction
- Wheel Loaders
FABICK CAT

Caterpillar 988G/H HIGH LIFT CYLINDER AND BUCKET, bucket, Construction
- bucket
WILLIAM ADAMS PTY. LTD.

Caterpillar 988G/H, bucket, Construction
- bucket
WILLIAM ADAMS PTY. LTD.

72,000

Caterpillar 988G, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC