AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D10R CUSTOM PARTS MANUAL TRACK-TYPE TRACTOR AKT00001-UP (MACHINE) POWERED BY 3412E Engine BASIC ENGINE Caterpillar SIS



TRACK-TYPE TRACTOR D10R TRACK-TYPE TRACTOR AKT
 D10R CUSTOM PARTS MANUAL TRACK-TYPE TRACTOR AKT00001-UP (MACHINE) POWERED BY 3412E Engine SEBC1337 D10R AKT   (2001)

Parts group D10R:

  For full view, you need register
BASIC ENGINE
CRANKSHAFT GP
PULLEY GP-CRANKSHAFT
179-1253 PULLEY GP-CRANKSHAFT
179-1253 PULLEY GP-CRANKSHAFT
PART OF 222-8548 FAN AR-REVERSIBLE
AN ATTACHMENT

Information:

(For parts list, see above)

Disassembly and Assembly
Air Compressor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Air Compressor Drive Gear - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Air Compressor Drive Gear - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Specifications
Balancer Group - Rear
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Balancer Group - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Balancer Group - Install
3408E and 3412E Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Air Conditioner Belt - Inspect/Adjust/Replace
D10R Track-Type Tractor
Alternator and Fan Belts - Inspect/Adjust/Replace
D10R Track-Type Tractor
Specifications
Belt Tension Chart
3408E and 3412E Engines for Caterpillar Built Machines
Belt Tension Chart
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Fan Belt Tightener - Remove
D10R Track-Type Tractor Engine Supplement
Fan Belt Tightener - Install
D10R Track-Type Tractor Engine Supplement
Fan Belt Tightener - Disassemble
D10R Track-Type Tractor Engine Supplement
Fan Belt Tightener - Assemble
D10R Track-Type Tractor Engine Supplement
Service Magazine
New Springs for the Tensioner for the Fan Drive Belt are Available {1358}
2004/04/19
Specifications
Camshaft Bearings
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft
3408E and 3412E Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN ANNOUNCES ADDITIONS TO CAMSHAFT PORTFOLIOS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES ADDITIONS TO CAMSHAFT PORTFOLIOS (UPDATED COVERAGE CHART)
Testing and Adjusting
Excessive Bearing Wear - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Cat<SUP>&reg;</SUP> Reman Has Added Valve Actuators, Valve Lifters, Rocker Arms, and Camshafts for Certain Machine Engines {1121, 1130, 1209, 1210}
2014/09/05
Cat<SUP>&reg;</SUP> Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
2015/06/25
An Improved Cooling Fan Clutch Is Now Used For D9R and D10R {1359}
2003/04/07
Specifications
Main Bearing Journal
3408E and 3412E Engines for Caterpillar Built Machines
Connecting Rod and Main Bearing Journals
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft
3408E and 3412E Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Main Bearings - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft - Install
3408E and 3412E Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
D10R Track-Type Tractor Engine Supplement
Crankshaft Front Seal - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
A New Crankshaft Front Seal Is Now In Production {1160}
2001/11/19
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/12
A New Integral Seal Provides Improved Sealing {7555}
2003/10/13
A New Type of Main Bearing is Available {1202, 1203}
2005/03/07
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Use Reuse and Salvage Guidelines for Measurements of Crankshafts {1202}
2006/10/09
Usability of Main Bearings and Connecting Rod Bearings {1202, 1203, 1218, 1219}
2008/11/24
Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Special Instruction
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Technical Information Bulletin
Liner Flange Breakage
Liner Flange Breakage
Specifications
Main Bearing Journal
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Block
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Liner
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Block
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Block
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Liner
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Main Bearings - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Liner - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Liner - Install
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
New 171-4660 Engine Stand Adapter Assembly Is Now Available {0701, 1000}
2000/04/17
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24
The Cylinder Liners Have a New Appearance {1216}
2005/03/14
Engine News
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Operation and Maintenance Manual
Engine Valve Lash - Check/Adjust
D10R Track-Type Tractor
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Cylinder Head Valves
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Head Valves
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Head
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Head
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Head - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Unit Injector Sleeve - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Sleeve - Install
3408E and 3412E Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
3408E and 3412E Engines for Caterpillar Built Machines
HEUI Fluid Manifold - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Head - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Head - Install
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Use the Correct Remanufactured Cylinder Heads and Valves {1101, 1105}
2006/03/13
Clearly Mark all of the Cracks on the Cylinder Head {1101, 7754}
2006/04/10
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Machine Engines {1100}
2012/05/08
A New Water Seal Assembly Is Now Used on All 3408 and 3412 Engines {1100, 7555}
2013/08/06
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Vibration Damper and Pulley
3408E and 3412E Engines for Caterpillar Built Machines
Vibration Damper
3408E and 3412E Engines for Caterpillar Built Machines
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Testing and Adjusting
Vibration Damper - Check
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
D10R Track-Type Tractor Engine Supplement
Operation and Maintenance Manual
Air Conditioner Belt - Inspect/Adjust/Replace
D10R Track-Type Tractor
Alternator and Fan Belts - Inspect/Adjust/Replace
D10R Track-Type Tractor
Disassembly and Assembly
Accessory Drive - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Alternator and Fan Belts - Inspect/Adjust/Replace
D10R Track-Type Tractor
Special Instruction
Replacement of Direct Drive Fan with Rockford Demand Fan{1356, 1359}
Replacement of Direct Drive Fan with Rockford Demand Fan{1356, 1359}
Specifications
Fan Clutch Oil Lines
D9R and D10R Variable Speed Fan Clutch
General Information
D9R and D10R Variable Speed Fan Clutch
Systems Operation
Lubrication System
D9R and D10R Variable Speed Fan Clutch
Electronic Control System
D9R and D10R Variable Speed Fan Clutch
General Information
D9R and D10R Variable Speed Fan Clutch
Fan Clutch
D9R and D10R Variable Speed Fan Clutch
Lubrication System
D9R and D10R Variable Speed Fan Clutch
Information Release Memo
REMAN FAN CLUTCH FOR THE 3400 ENGINE
REMAN FAN CLUTCH FOR THE 3400 ENGINE
Troubleshooting
CID 0544 FMI 08 Engine Cooling Fan Speed signal abnormal
3408E and 3412E Engines for Caterpillar Built Machines
Variable Pitch Engine Fan Circuit - Test
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Fan Clutch - Remove
D9R and D10R Variable Speed Fan Clutch
Fan Clutch - Install
D9R and D10R Variable Speed Fan Clutch
Fan Drive - Remove and Install
D10R Track-Type Tractor Engine Supplement
Fan Clutch - Disassemble
D9R and D10R Variable Speed Fan Clutch
Fan Clutch - Assemble
D9R and D10R Variable Speed Fan Clutch
Service Magazine
An Improved Cooling Fan Clutch Is Now Used For D9R and D10R {1359}
2003/04/07
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel
3408E and 3412E Engines for Caterpillar Built Machines
Flywheel Housing
3408E and 3412E Engines for Caterpillar Built Machines
Flywheel
3408E and 3412E Engines for Caterpillar Built Machines
Flywheel
3408E and 3412E Engines for Caterpillar Built Machines
Flywheel Housing
3408E and 3412E Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Flywheel - Install
3408E and 3412E Engines for Caterpillar Built Machines
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Gear Group (Front)
3408E and 3412E Engines for Caterpillar Built Machines
Gear Group (Rear)
3408E and 3412E Engines for Caterpillar Built Machines
Gear Group (Front)
3408E and 3412E Engines for Caterpillar Built Machines
Gear Group (Rear)
3408E and 3412E Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
3408E and 3412E Engines for Caterpillar Built Machines
Gear Group - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Gear Group (Front) - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Gear Group (Front) - Install
3408E and 3412E Engines for Caterpillar Built Machines
Gear Group (Rear) - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Gear Group (Rear) - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Specifications
Flywheel Housing
3408E and 3412E Engines for Caterpillar Built Machines
Flywheel Housing
3408E and 3412E Engines for Caterpillar Built Machines
Testing and Adjusting
Flywheel Housing - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
A New Integral Seal Provides Improved Sealing {7555}
2003/10/13
An Improved Gasket Is Now Used on the Electric Starting Motor of Certain Track Type Tractors {1157, 1453, 7555}
2012/07/23
Specifications
Housing (Front)
3408E and 3412E Engines for Caterpillar Built Machines
Housing (Front)
3408E and 3412E Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Housing (Front) - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Housing (Front) - Install
3408E and 3412E Engines for Caterpillar Built Machines
Troubleshooting
Engine Will Not Crank
3408E and 3412E Engines for Caterpillar Built Machines
Coolant in Engine Oil
3408E and 3412E Engines for Caterpillar Built Machines
Coolant Temperature Is Too High
3408E and 3412E Engines for Caterpillar Built Machines
Engine Cranks but Will Not Start
3408E and 3412E Engines for Caterpillar Built Machines
Engine Has Early Wear
3408E and 3412E Engines for Caterpillar Built Machines
Engine Oil in Cooling System
3408E and 3412E Engines for Caterpillar Built Machines
Fuel in Cooling System
3408E and 3412E Engines for Caterpillar Built Machines
Low Engine Oil Pressure
3408E and 3412E Engines for Caterpillar Built Machines
Exhaust Temperature Is Too High
3408E and 3412E Engines for Caterpillar Built Machines
Engine Stalls at Low RPM
3408E and 3412E Engines for Caterpillar Built Machines
Noise Coming from Cylinder
3408E and 3412E Engines for Caterpillar Built Machines
Excessive White Smoke
3408E and 3412E Engines for Caterpillar Built Machines
Excessive Black Smoke
3408E and 3412E Engines for Caterpillar Built Machines
Low Power/Poor or No Response to Throttle
3408E and 3412E Engines for Caterpillar Built Machines
Engine Misfires, Runs Rough or Is Unstable
3408E and 3412E Engines for Caterpillar Built Machines
Intermittent Low Power or Power Cutout
3408E and 3412E Engines for Caterpillar Built Machines
Valve Rotator or Spring Lock Is Free
3408E and 3412E Engines for Caterpillar Built Machines
Excessive Valve Lash
3408E and 3412E Engines for Caterpillar Built Machines
Can Not Reach Top Engine RPM
3408E and 3412E Engines for Caterpillar Built Machines
Engine Vibration
3408E and 3412E Engines for Caterpillar Built Machines
Excessive Fuel Consumption
3408E and 3412E Engines for Caterpillar Built Machines
Excessive Engine Oil Consumption
3408E and 3412E Engines for Caterpillar Built Machines
Mechanical Noise (Knock) in Engine
3408E and 3412E Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Mounts and Equalizer Bar - Inspect
D10R Track-Type Tractor
Specifications
Engine Support (Front)
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Engine Support (Front) - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Engine Trunnion - Remove and Install
D10R Track-Type Tractor Engine Supplement
Engine Support (Rear) - Disassemble
D10R Track-Type Tractor Engine Supplement
Engine Support (Rear) - Assemble
D10R Track-Type Tractor Engine Supplement
Engine Trunnion - Disassemble
D10R Track-Type Tractor Engine Supplement
Engine Trunnion - Assemble
D10R Track-Type Tractor Engine Supplement
Operation and Maintenance Manual
Engine Oil Level - Check
D10R Track-Type Tractor
Specifications
Engine Oil Pan
3408E and 3412E Engines for Caterpillar Built Machines
Engine Oil Pan
3408E and 3412E Engines for Caterpillar Built Machines
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Oil Pan - Remove
D10R Track-Type Tractor Engine Supplement
Oil Pan - Install
D10R Track-Type Tractor Engine Supplement
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod
3408E and 3412E Engines for Caterpillar Built Machines
Piston and Rings
3408E and 3412E Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
3408E and 3412E Engines for Caterpillar Built Machines
Piston and Rings
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3408E and 3412E Engines for Caterpillar Built Machines
Compression - Test
3408E and 3412E Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
3408E and 3412E Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
3408E and 3412E Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble - One-Piece Piston
3408E and 3412E Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble - One-Piece Piston
3408E and 3412E Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
New Guidelines for Inspecting Pistons {1214}
2006/01/02
New Piston Pin Is Now Available in 3400 Cylinder Packs {1225, 1239}
New Piston Pin Is Now Available in 3400 Cylinder Packs {1225, 1239}
Usability of Main Bearings and Connecting Rod Bearings {1202, 1203, 1218, 1219}
2008/11/24
An Improved Top Piston Ring Is Now Used with the Aluminum Pistons in the 3406, 3408, and 3412 Engines of Certain Machines {1215}
2012/04/30
Operation and Maintenance Manual
Alternator and Fan Belts - Inspect/Adjust/Replace
D10R Track-Type Tractor
Specifications
Vibration Damper and Pulley
3408E and 3412E Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
D10R Track-Type Tractor Engine Supplement
Service Magazine
A New Demand Fan Drive System is Now Used {1359}
2004/02/02
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
New 171-4660 Engine Stand Adapter Assembly Is Now Available {0701, 1000}
2000/04/17
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
Belt Tension Chart
3408E and 3412E Engines for Caterpillar Built Machines
Belt Tension Chart
3408E and 3412E Engines for Caterpillar Built Machines
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
D10R Track-Type Tractor
Engine Valve Lash - Check/Adjust
D10R Track-Type Tractor
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 6N6872 LIFTER GUIDE SRINGS FROM DEALER PARTS STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 6N6872 LIFTER GUIDE SRINGS FROM DEALER PARTS STOCK.
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
Specifications
Valve Rocker Arms, Lifters, and Bridges
3408E and 3412E Engines for Caterpillar Built Machines
Valve Rocker Arms and Lifters
3408E and 3412E Engines for Caterpillar Built Machines
Valve Mechanism Cover
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 6N6872 LIFTER GUIDE SRINGS FROM DEALER PARTS STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 6N6872 LIFTER GUIDE SRINGS FROM DEALER PARTS STOCK.
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 6N6872 LIFTER GUIDE SRINGS FROM DEALER PARTS STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 6N6872 LIFTER GUIDE SRINGS FROM DEALER PARTS STOCK.
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
3408E and 3412E Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Valve Mechanism Cover Base - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Rocker Arm - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Rocker Arm - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
3408E and 3412E Engines for Caterpillar Built Machines
Lifter Group - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Valve Cover - Remove and Install
D10R Track-Type Tractor Engine Supplement
Service Magazine
Use the Correct Remanufactured Cylinder Heads and Valves {1101, 1105}
2006/03/13
A New Guide Spring for the Camshaft Lifter is Now Used {1102, 1121, 1123}
2015/02/12
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
A New Tool Is Used to Insert the Valve Lifter Guide Spring into Certain Machine Engines {0703, 1102}
2012/12/03
Cat<SUP>&reg;</SUP> Reman Has Added Valve Actuators, Valve Lifters, Rocker Arms, and Camshafts for Certain Machine Engines {1121, 1130, 1209, 1210}
2014/09/05
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Service Magazine
A New Improved Seal Is Now Used in the Reman Water Pumps in the Engines of Certain Machines {1000, 1361, 7555}
2012/05/10

Truck sale:

 
150,000 USD 
Caterpillar D10R, Construction
- Dozers
PETERSON TRACTOR CO
Caterpillar D10R, Construction
 
Caterpillar D10R, Construction
- Dozers
GREGORY POOLE EQUIPMENT CO.
Caterpillar D10R, Construction
160,000 
Caterpillar D10R, Construction
- Dozers
QUINN COMPANY
Caterpillar D10R, Construction
155,000 
Caterpillar D10R, Construction
- Dozers
CASHMAN EQUIPMENT CO.
CATERPILLAR D10R 1997
 
CATERPILLAR D10R 1997
- TRACK TYPE TRACTORS
QUINN COMPANY
California United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.