D10R CUSTOM PARTS MANUAL TRACK-TYPE TRACTOR AKT00001-UP (MACHINE) POWERED BY 3412E Engine FUEL SYSTEM Caterpillar SIS




TRACK-TYPE TRACTOR D10R TRACK-TYPE TRACTOR AKT
 D10R CUSTOM PARTS MANUAL TRACK-TYPE TRACTOR AKT00001-UP (MACHINE) POWERED BY 3412E Engine SEBC1337 D10R AKT   (2001)

Parts group D10R:

  For full view, you need register
FUEL SYSTEM
TANK GP-FUEL
TANK GP-FUEL
135-3199 TANK GP-FUEL
135-3199 TANK GP-FUEL
PART OF 244-8947 HEATER AR-CAB
AN ATTACHMENT
TANK GP-FUEL
247-5459 TANK GP-FUEL
247-5459 TANK GP-FUEL
PART OF 244-8947 HEATER AR-CAB
AN ATTACHMENT
TANK GP-FUEL
254-2131 TANK GP-FUEL
254-2131 TANK GP-FUEL
1110-LITERS (293-US GAL)
AN ATTACHMENT
TANK GP-FUEL
254-2132 TANK GP-FUEL
254-2132 TANK GP-FUEL
1110-LITER (293-US GAL)
PART OF 254-2131 TANK GP-FUEL
AN ATTACHMENT

Information:

(For parts list, see above)

Disassembly and Assembly
Decelerator Control - Remove
D10R Track-Type Tractor Engine Supplement
Decelerator Control - Install
D10R Track-Type Tractor Engine Supplement
Decelerator Control - Disassemble
D10R Track-Type Tractor Engine Supplement
Decelerator Control - Assemble
D10R Track-Type Tractor Engine Supplement
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Secondary Filter - Replace
D10R Track-Type Tractor
Fuel System Primary Filter - Clean/Replace
D10R Track-Type Tractor
Fuel System Primary Filter (Water Separator) - Drain
D10R Track-Type Tractor
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Technical Information Bulletin
EARLY HOUR FUEL FILTER PLUGGING ON THE D6R, D7R, D8R, D9R, D10R, AND D11R TRACK TYPE TRACTORS
EARLY HOUR FUEL FILTER PLUGGING ON THE D6R, D7R, D8R, D9R, D10R, AND D11R TRACK TYPE TRACTORS
Specifications
Fuel Filter Base
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Filter Base - Remove and Install
D10R Track-Type Tractor Engine Supplement
Fuel Filter Base - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Fuel Filter Base - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
An Improved Valve in the Bowl of the Fuel/Water Separator is Available {1261, 1263}
2004/12/20
Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
2005/07/11
Improved Seal on Fuel Filter {1261}
2005/09/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14
A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
2009/10/29
Special Instruction
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Technical Information Bulletin
Reman 3400 HEUI Injectors May Be Mislabeled {1290}
Reman 3400 HEUI Injectors May Be Mislabeled {1290}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Magazine
Introduction of New Hydraulic Electronic Unit Injectors for 3408E and 3412E Machine Engines {1251, 1290}
2002/11/25
New Injectors are Being Offered in Place of Remanufactured Injectors {1000, 1251, 1254, 1290, 1713}
2011/08/25
Special Instruction
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Disassembly and Assembly
Fuel Filter Base - Remove and Install
D10R Track-Type Tractor Engine Supplement
Service Magazine
Installation of a Protective Sleeve for the Hose on the Pump of the Hydraulic Electronic Unit Injector (HEUI) Fuel System is Now Used {1307, 1714}
2004/09/27
A Two Piece Clip and Grommet Are Used On the Fuel Lines On Certain Machine Engines {1250, 1250, 7553}
2015/03/11
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
New Design of the Injector Provides Improved Durability {1290, 1714}
2006/03/20
New Injectors are Being Offered in Place of Remanufactured Injectors {1000, 1251, 1254, 1290, 1713}
2011/08/25
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2006/05/29
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
2008/12/01
Cat<SUP>&reg;</SUP> Reman Announces Additions to Several Engine Component Portfolios {108F, 1091, 1251, 1254, 1290, 1713}
2015/07/10
Troubleshooting
Excessive Fuel Consumption
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
Introduction of New Hydraulic Electronic Unit Injectors for 3408E and 3412E Machine Engines {1251, 1290}
2002/11/25
Cat<SUP>&reg;</SUP> Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
2015/06/25
Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Removal And Installation Of The Hydraulic Electronic Unit Injectors{1290}
Removal And Installation Of The Hydraulic Electronic Unit Injectors{1290}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Installation Of The 174-8943 Sleeve Into The 3408E And 3412E Unit Injector Hydraulic Pump{1714}
Installation Of The 174-8943 Sleeve Into The 3408E And 3412E Unit Injector Hydraulic Pump{1714}
Introduction of New 3408E and 3412E Hydraulic Electronic Unit Injectors{1290, 1290, 1902, 7620}
Introduction of New 3408E and 3412E Hydraulic Electronic Unit Injectors{1290, 1290, 1902, 7620}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP GROUP ON CERTAIN 3408E AND 3412E POWERED 836 COMPACTORS; 834B AND 844 WHEEL DOZERS; 988F AND 990 WHEEL LOADERS; 5110B EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; AD40, AE40,
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP GROUP ON CERTAIN 3408E AND 3412E POWERED 836 COMPACTORS; 834B AND 844 WHEEL DOZERS; 988F AND 990 WHEEL LOADERS; 5110B EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; AD40, AE40,
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Excessive Oil Leak from Injectors{1290}
Excessive Oil Leak from Injectors{1290}
Specifications
Injection Actuation Pressure Control Valve
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Wiring
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP GROUP ON CERTAIN 3408E AND 3412E POWERED 836 COMPACTORS; 834B AND 844 WHEEL DOZERS; 988F AND 990 WHEEL LOADERS; 5110B EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; AD40, AE40,
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP GROUP ON CERTAIN 3408E AND 3412E POWERED 836 COMPACTORS; 834B AND 844 WHEEL DOZERS; 988F AND 990 WHEEL LOADERS; 5110B EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; AD40, AE40,
Service Letter-Asia
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP GROUP ON CERTAIN 3408E AND 3412E POWERED 836 COMPACTORS; 834B AND 844 WHEEL DOZERS; 988F AND 990 WHEEL LOADERS; 5110B EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; AD40, AE40,
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP GROUP ON CERTAIN 3408E AND 3412E POWERED 836 COMPACTORS; 834B AND 844 WHEEL DOZERS; 988F AND 990 WHEEL LOADERS; 5110B EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; AD40, AE40,
Testing and Adjusting
Fuel Injector Oil Leakage - Check
3408E and 3412E Engines for Caterpillar Built Machines
Troubleshooting
CID 0001 FMI 05 Cylinder #1 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines
CID 0001 FMI 06 Cylinder #1 Injector short
3408E and 3412E Engines for Caterpillar Built Machines
CID 0002 FMI 05 Cylinder #2 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines
CID 0003 FMI 05 Cylinder #3 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines
CID 0004 FMI 05 Cylinder #4 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines
CID 0005 FMI 05 Cylinder #5 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines
CID 0006 FMI 05 Cylinder #6 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines
CID 0009 FMI 05 Cylinder #9 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines
CID 0010 FMI 05 Cylinder #10 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines
CID 0011 FMI 05 Cylinder #11 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines
CID 0012 FMI 05 Cylinder #12 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines
CID 0007 FMI 05 Cylinder #7 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines
CID 0008 FMI 05 Cylinder #8 Injector open circuit
3408E and 3412E Engines for Caterpillar Built Machines
CID 0002 FMI 06 Cylinder #2 Injector short
3408E and 3412E Engines for Caterpillar Built Machines
CID 0003 FMI 06 Cylinder #3 Injector short
3408E and 3412E Engines for Caterpillar Built Machines
CID 0004 FMI 06 Cylinder #4 Injector short
3408E and 3412E Engines for Caterpillar Built Machines
CID 0005 FMI 06 Cylinder #5 Injector short
3408E and 3412E Engines for Caterpillar Built Machines
CID 0006 FMI 06 Cylinder #6 Injector short
3408E and 3412E Engines for Caterpillar Built Machines
CID 0007 FMI 06 Cylinder #7 Injector short
3408E and 3412E Engines for Caterpillar Built Machines
CID 0008 FMI 06 Cylinder #8 Injector short
3408E and 3412E Engines for Caterpillar Built Machines
CID 0009 FMI 06 Cylinder #9 Injector short
3408E and 3412E Engines for Caterpillar Built Machines
CID 0010 FMI 06 Cylinder #10 Injector short
3408E and 3412E Engines for Caterpillar Built Machines
CID 0011 FMI 06 Cylinder #11 Injector short
3408E and 3412E Engines for Caterpillar Built Machines
CID 0012 FMI 06 Cylinder #12 Injector short
3408E and 3412E Engines for Caterpillar Built Machines
Injector Solenoid Circuit - Test
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Injection Actuation Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector - Install
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Sensor - Remove and Install
D10R Track-Type Tractor Engine Supplement
Service Magazine
Introduction of New 3408E and 3412E Hydraulic Electronic Unit Injectors {1290}
2002/08/26
Introduction of New Hydraulic Electronic Unit Injectors for 3408E and 3412E Machine Engines {1251, 1290}
2002/11/25
The Special Instruction, REHS1385 , "Introduction of New 3408E and 3412E Hydraulic Electronic Unit Injectors" Has Been Updated in Order to Address Lockup of the ECM {1290}
2003/10/06
New Design of the Injector Provides Improved Durability {1290, 1714}
2006/03/20
New Injectors are Being Offered in Place of Remanufactured Injectors {1000, 1251, 1254, 1290, 1713}
2011/08/25
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2006/05/29
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Improved Remanufactured Injectors Are Now Used on Some 3408E and 3412E Machine Engines {1251, 1254, 1290, 1713}
2010/05/06
Cat<SUP>&reg;</SUP> Reman Announces Additions to Several Engine Component Portfolios {108F, 1091, 1251, 1254, 1290, 1713}
2015/07/10
Truck Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Operation and Maintenance Manual
Fuel System - Prime
D10R Track-Type Tractor
Fuel System Primary Filter - Clean/Replace
D10R Track-Type Tractor
Fuel System Primary Filter (Water Separator) - Drain
D10R Track-Type Tractor
Special Instruction
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Fuel System - Prime
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
An Improved Fuel Priming Pump Gasket Is Now Used on Certain Machine Engines {1258, 7555}
2011/09/15
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/04
Special Instruction
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Specifications
Fuel Transfer Pump
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Testing and Adjusting
Fuel System Pressure - Test
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Transfer Pump - Install
3408E and 3412E Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove and Install
D10R Track-Type Tractor Engine Supplement
Special Instruction
Removal And Installation Of The Hydraulic Electronic Unit Injectors{1290}
Removal And Installation Of The Hydraulic Electronic Unit Injectors{1290}
Installation Of The 174-8943 Sleeve Into The 3408E And 3412E Unit Injector Hydraulic Pump{1714}
Installation Of The 174-8943 Sleeve Into The 3408E And 3412E Unit Injector Hydraulic Pump{1714}
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP GROUP ON CERTAIN 3408E AND 3412E POWERED 836 COMPACTORS; 834B AND 844 WHEEL DOZERS; 988F AND 990 WHEEL LOADERS; 5110B EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; AD40, AE40,
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP GROUP ON CERTAIN 3408E AND 3412E POWERED 836 COMPACTORS; 834B AND 844 WHEEL DOZERS; 988F AND 990 WHEEL LOADERS; 5110B EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; AD40, AE40,
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Injection Actuation Pressure Control Valve
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Sensor
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
3408E and 3412E Engines for Caterpillar Built Machines
Hydraulic Pump Drive
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Sensor
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP GROUP ON CERTAIN 3408E AND 3412E POWERED 836 COMPACTORS; 834B AND 844 WHEEL DOZERS; 988F AND 990 WHEEL LOADERS; 5110B EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; AD40, AE40,
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP GROUP ON CERTAIN 3408E AND 3412E POWERED 836 COMPACTORS; 834B AND 844 WHEEL DOZERS; 988F AND 990 WHEEL LOADERS; 5110B EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; AD40, AE40,
Service Letter-Asia
Service Letter-APD
Troubleshooting
CID 0042 FMI 05 Injector Actuation Valve open circuit
3408E and 3412E Engines for Caterpillar Built Machines
CID 0042 FMI 06 Injector Actuation Valve short to ground
3408E and 3412E Engines for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3408E and 3412E Engines for Caterpillar Built Machines
E164 High Injector Actuation Pressure
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Injection Actuation Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump Drive - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump Drive - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Control Valve - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Control Valve - Install
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Control Valve - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Injection Actuation Pressure Control Valve - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Install
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump Drive - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump Drive - Install
3408E and 3412E Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove and Install
D10R Track-Type Tractor Engine Supplement
Unit Injector Hydraulic Pump - Remove
D10R Track-Type Tractor Engine Supplement
Unit Injector Hydraulic Pump - Install
D10R Track-Type Tractor Engine Supplement
Injection Actuation Pressure Sensor - Remove and Install
D10R Track-Type Tractor Engine Supplement
Service Magazine
Installation of a Protective Sleeve for the Hose on the Pump of the Hydraulic Electronic Unit Injector (HEUI) Fuel System is Now Used {1307, 1714}
2004/09/27
Troubleshooting the Injection Actuation Pressure on Unit Injector Hydraulic Pumps {1714}
2006/11/13
Operation and Maintenance Manual
Fuel System Primary Filter (Water Separator) - Drain
D10R Track-Type Tractor
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Service Magazine
An Improved Valve in the Bowl of the Fuel/Water Separator is Available {1261, 1263}
2004/12/20
Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
2005/07/11
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21
A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
2009/10/29
Operation and Maintenance Manual
Fuel Tank Cap Filter and Strainer - Replace/Clean
D10R Track-Type Tractor
Fuel Tank Water and Sediment - Drain
D10R Track-Type Tractor
Special Instruction
Reinforcing the Mounts and the Relief Area on the Fuel Tank {1273}
Reinforcing the Mounts and the Relief Area on the Fuel Tank {1273}
Installation Of An Improved Air Vent For The Fast Fill Fuel System{1273, 1710}
Installation Of An Improved Air Vent For The Fast Fill Fuel System{1273, 1710}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Troubleshooting
MID 051 - CID 0096 - FMI 03
D10R and D11R Track-Type Tractors Vital Information Display System (VIDS)
MID 051 - CID 0096 - FMI 04
D10R and D11R Track-Type Tractors Vital Information Display System (VIDS)
MID 051 - CID 0096 - FMI 08
D10R and D11R Track-Type Tractors Vital Information Display System (VIDS)
Service Magazine
Special Instruction, REHS1730 , "Reinforcing the Mounts on the Fuel Tank" is Available {1273}
2003/12/22
Updated Fuel Tank Caps Are Now Available {1273}
2004/03/15
Updated Fuel Tank Caps are Now Available {1273}
2013/03/22
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Improvements Have Been Made to the Fuel Level Sensor Group {1273, 7481}
2008/08/25
The Fast Fill Fuel Adapter and the Receiver Assembly has been Updated on Certain Pipelayers, and Track-Type Tractors {1273, 1710}
2012/02/21
An Improved Dust Cap Within the Fast Fill Fuel Adapter Group is Now Used on Certain D9, D10 and D11 Track-Type Tractors {1273, 1710}
2013/04/03
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Magazine
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/12/04
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Truck sale:

 
150,000 USD 
Caterpillar D10R, Construction
- Dozers
PETERSON TRACTOR CO
Caterpillar D10R, Construction
 
Caterpillar D10R, Construction
- Dozers
GREGORY POOLE EQUIPMENT CO.
Caterpillar D10R, Construction
160,000 
Caterpillar D10R, Construction
- Dozers
QUINN COMPANY
Caterpillar D10R, Construction
155,000 
Caterpillar D10R, Construction
- Dozers
CASHMAN EQUIPMENT CO.
CATERPILLAR D10R 1997
 
CATERPILLAR D10R 1997
- TRACK TYPE TRACTORS
QUINN COMPANY
California United States