AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

Waste Handler Custom Product Support Literature for the 950G Series II Wheel Loader and the 962G Series II Wheel Loader AYB00001-UP (MACHINE) FUEL SYSTEM Caterpillar SIS



WHEEL LOADER 950G II WHEEL LOADER AYB
 Waste Handler Custom Product Support Literature for the 950G Series II Wheel Loader and the 962G Series II Wheel Loader AYB00001-UP (MACHINE) SEBC1342 950G II AYB   (1999)

Parts group 950G II:

  For full view, you need register
FUEL SYSTEM
TANK GP-FUEL
TANK GP-FUEL
2Q-8209 TANK GP-FUEL
2Q-8209 TANK GP-FUEL
PART OF 2Q-8234 GUARD GP-FUEL & HYDRAULIC TANK
173-7647 GUARD GP-FUEL & HYDRAULIC TANK
173-7647 GUARD GP-FUEL & HYDRAULIC TANK -CUSTOM
GUARD GP-FUEL & HYDRAULIC TANK
2Q-8234 GUARD GP-FUEL & HYDRAULIC TANK
2Q-8234 GUARD GP-FUEL & HYDRAULIC TANK -CUSTOM
PART OF 173-7647 GUARD GP-FUEL & HYDRAULIC TANK

Information:

(For parts list, see above)

Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System - Prime
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Fuel System Primary Filter (Water Separator) - Drain
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Fuel System Primary Filter (Water Separator) Element - Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Fuel System Secondary Filter - Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Specifications
Fuel Filter Base
3126B Engine for Caterpillar Built Machines
Fuel Filter and Water Separator
3126B Engine for Caterpillar Built Machines
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Information Release Memo
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
Disassembly and Assembly
Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Service Magazine
An Improved Valve in the Bowl of the Fuel/Water Separator is Available {1261, 1263}
2004/12/20
Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
2005/07/11
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14
A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
2009/10/29
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Special Instruction
Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857}
Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857}
Service Magazine
Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2009/07/27
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Information Release Memo
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
Disassembly and Assembly
Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Service Magazine
New Fuel Pressure Regulators Are Used on Certain Machines Equipped with C7 and C9 Engines {1715}
2013/02/25
A Two Piece Clip and Grommet Are Used On the Fuel Lines On Certain Machine Engines {1250, 1250, 7553}
2013/09/02
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Information Release Memo
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
2008/12/01
Tool Operating Manual
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Service Magazine
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07
New Fuel Priming Instructions are Available for Certain 3126B Engines {1250, 1258, 1290}
New Fuel Priming Instructions are Available for Certain 3126B Engines {1250, 1258, 1290}
Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Operation and Maintenance Manual
Fuel Injection Timing - Check
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
New Fuel Priming Instructions are Available for Certain 3126B Engines {1258, 1290}
New Fuel Priming Instructions are Available for Certain 3126B Engines {1258, 1290}
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW WIRE ASSEMBLY IN THE INJECTION ACTUATION PRESSURE CONTROL ON CERTAIN 325C AND 325C L EXCAVATORS AND 950G II AND 962G II WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW WIRE ASSEMBLY IN THE INJECTION ACTUATION PRESSURE CONTROL ON CERTAIN 325C AND 325C L EXCAVATORS AND 950G II AND 962G II WHEEL LOADERS
Technical Information Bulletin
A NEW INJECTION ACTUATION PRESSURE CONTROL VALVE CONNECTOR INCREASES ENGINE OPERATION
A NEW INJECTION ACTUATION PRESSURE CONTROL VALVE CONNECTOR INCREASES ENGINE OPERATION
Specifications
Injection Actuation Pressure Control Valve
3126B Engine for Caterpillar Built Machines
Unit Injector
3126B Engine for Caterpillar Built Machines
Unit Injector Hydraulic Pump
3126B Engine for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
REMANUFACTURED FUEL INJECTORS FOR VARIOUS 3126B AND 3126E ENGINE APPLICATIONS
REMANUFACTURED FUEL INJECTORS FOR VARIOUS 3126B AND 3126E ENGINE APPLICATIONS
REMANUFACTURED FUEL INJECTOR FOR VARIOUS 3126B & 3126E INDUSTRIAL, MACHINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED FUEL INJECTOR FOR VARIOUS 3126B & 3126E INDUSTRIAL, MACHINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED FUEL INJECTORS FOR VARIOUS 3126B AND 3126E ENGINE APPLICATIONS
REMANUFACTURED FUEL INJECTORS FOR VARIOUS 3126B AND 3126E ENGINE APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL Long Block/Short Block Options for 3126B and C7 Engines
CAT REMAN ANNOUNCES ADDITIONAL Long Block/Short Block Options for 3126B and C7 Engines
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
CATERPILLAR REMAN ANNOUNCES THE INTRODUCTION OF REMANUFACTURED INJECTOR KITS FOR CERTAIN 3126B, C-12, and C15 ACERT ENGINES
Testing and Adjusting
Unit Injector - Test
3126B Engines
Troubleshooting
Injector Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0001 FMI 11 Cylinder #1 Injector fault
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0002 FMI 11 Cylinder #2 Injector fault
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0003 FMI 11 Cylinder #3 Injector fault
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0004 FMI 11 Cylinder #4 Injector fault
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0005 FMI 11 Cylinder #5 Injector fault
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0006 FMI 11 Cylinder #6 Injector fault
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Disassembly and Assembly
Unit Injector - Remove
3126B Engines for Caterpillar Built Machines
Unit Injector - Install
3126B Engines for Caterpillar Built Machines
Unit Injector - Remove - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Unit Injector - Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Service Magazine
Improved O-Ring Seals for Fuel Injectors for Longer Seal Life {1254}
2003/10/20
Replacement of the Injection Actuation Pressure Control Valve {5051}
2004/03/22
Service Tips for the Hydraulic Electronic Unit Injector HEUI Pump {1714}
2006/03/13
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Service Tips for the Hydraulic Electronic Unit Injector HEUI Pump {1714}
2010/08/26
Truck Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/11/26
Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Operation and Maintenance Manual
Fuel System - Prime
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Fuel System Primary Filter (Water Separator) - Drain
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Fuel System Primary Filter (Water Separator) Element - Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
New Fuel Priming Instructions are Available for Certain 3126B Engines {1258, 1290}
New Fuel Priming Instructions are Available for Certain 3126B Engines {1258, 1290}
Technical Information Bulletin
Faulty Fuel Priming Pumps on Various Engines
Faulty Fuel Priming Pumps on Various Engines
The Electronic Priming Pump for Machine Engines will not Prime{1258, 1263}
The Electronic Priming Pump for Machine Engines will not Prime{1258, 1263}
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting
Fuel System - Prime
3126B Engines
Disassembly and Assembly
Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Service Magazine
Improved Mounting Bracket Is Now Being Used for the Fuel Priming Pump Switch {1258, 7332}
2005/02/14
Replacement of the Priming Pump {1258, 1263}
2007/11/05
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/04
New Fuel Priming Instructions are Available for Certain 3126B Engines {1250, 1258, 1290}
New Fuel Priming Instructions are Available for Certain 3126B Engines {1250, 1258, 1290}
Special Instruction
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Specifications
Fuel Transfer Pump
3126B Engine for Caterpillar Built Machines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Testing and Adjusting
Fuel System Pressure - Test
3126B Engines
Disassembly and Assembly
Fuel Transfer Pump - Remove - If Equipped
3126B Engines for Caterpillar Built Machines
Fuel Transfer Pump - Install - If Equipped
3126B Engines for Caterpillar Built Machines
Special Instruction
Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW WIRE ASSEMBLY IN THE INJECTION ACTUATION PRESSURE CONTROL ON CERTAIN 325C AND 325C L EXCAVATORS AND 950G II AND 962G II WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW WIRE ASSEMBLY IN THE INJECTION ACTUATION PRESSURE CONTROL ON CERTAIN 325C AND 325C L EXCAVATORS AND 950G II AND 962G II WHEEL LOADERS
Technical Information Bulletin
A NEW INJECTION ACTUATION PRESSURE CONTROL VALVE CONNECTOR INCREASES ENGINE OPERATION
A NEW INJECTION ACTUATION PRESSURE CONTROL VALVE CONNECTOR INCREASES ENGINE OPERATION
Specifications
Injection Actuation Pressure Control Valve
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Sensor
3126B Engine for Caterpillar Built Machines
Unit Injector Hydraulic Pump
3126B Engine for Caterpillar Built Machines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Information Release Memo
REMANUFACTURED FUEL INJECTOR FOR VARIOUS 3126B & 3126E INDUSTRIAL, MACHINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED FUEL INJECTOR FOR VARIOUS 3126B & 3126E INDUSTRIAL, MACHINE AND ON-HIGHWAY TRUCK APPLICATIONS
Troubleshooting
CID 0042 FMI 11 Inject Actuation Control Valve open/short
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Injection Actuation Pressure Control Valve Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Injection Actuation Pressure - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Disassembly and Assembly
Injection Actuation Pressure Control Valve - Remove and Install
3126B Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Remove
3126B Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Install
3126B Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump - Remove - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Unit Injector Hydraulic Pump - Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Service Magazine
Replacement of the Injection Actuation Pressure Control Valve {5051}
2004/03/22
New Fuel Priming Instructions are Available for Certain 3126B Engines {1250, 1258, 1290}
New Fuel Priming Instructions are Available for Certain 3126B Engines {1250, 1258, 1290}
Disassembly and Assembly
Fuel Pressure Regulator - Remove and Install
3126B Engines for Caterpillar Built Machines
Service Magazine
New Fuel Pressure Regulators are Now Available {1715}
2013/02/27
New Fuel Pressure Regulators Are Used on Certain Machines Equipped with C7 and C9 Engines {1715}
2013/02/25
Operation and Maintenance Manual
Fuel System Primary Filter (Water Separator) - Drain
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Fuel System Primary Filter (Water Separator) Element - Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Technical Information Bulletin
The Electronic Priming Pump for Machine Engines will not Prime{1258, 1263}
The Electronic Priming Pump for Machine Engines will not Prime{1258, 1263}
Specifications
Fuel Filter and Water Separator
3126B Engine for Caterpillar Built Machines
Disassembly and Assembly
Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Service Magazine
An Improved Valve in the Bowl of the Fuel/Water Separator is Available {1261, 1263}
2004/12/20
Improved Fuel/Water Separators are now Used {1260, 1261, 1263}
2005/07/11
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21
Replacement of the Priming Pump {1258, 1263}
2007/12/24
A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
2009/10/29
Operation and Maintenance Manual
Fuel Tank Cap and Strainer - Clean
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Fuel Tank Water and Sediment - Drain
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857}
Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857}
Specifications
Fuel Level Sender
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Troubleshooting
MID 030 - CID 0096 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 08
Caterpillar Monitoring System
Fuel Level Sender
Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 04
Caterpillar Monitoring System
Disassembly and Assembly
Fuel Tank - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Fuel Tank - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Service Magazine
Updated Fuel Tank Caps Are Now Available {1273}
2004/03/15
Updated Fuel Tank Caps are Now Available {1273}
2014/01/24
Troubleshooting Column-Type Fuel Level Senders {5574, 7481}
2005/08/22
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2009/07/27
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Magazine
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/12/01
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.