AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

Autodig Control Arrangement Custom Product Support Literature for the G Series II Wheel Loaders ANT00001-UP (MACHINE) HYDRAULIC SYSTEM Caterpillar SIS



WHEEL LOADER 966G II WHEEL LOADER ANT
 Autodig Control Arrangement Custom Product Support Literature for the G Series II Wheel Loaders ANT00001-UP (MACHINE) SEBC1343 966G II ANT   (1999)

Parts group 966G II:

  For full view, you need register
HYDRAULIC SYSTEM
ACCUMULATOR GP
ACCUMULATOR GP-RIDE CONTROL
271-6633 ACCUMULATOR GP-RIDE CONTROL
271-6633 ACCUMULATOR GP-RIDE CONTROL -UNCHARGED
S/N ANT1-UP; ANY1-UP
FIELD INSTALLATION

Information:

(For parts list, see above)

Operation and Maintenance Manual
Ride Control Accumulator - Check
966G II and 972G II Wheel Loaders
Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Specifications
Ride Control Accumulator
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Ride Control Accumulator
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Testing and Adjusting
Ride Control Accumulator - Test and Charge
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Ride Control Pressure Equalization Time - Adjust
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Disassembly and Assembly
Ride Control Accumulator - Remove and Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Service Magazine
New Precharge Pressures Improve Operation of Ride Control Accumulators {5077}
2004/12/27
A Modification of Accumulator Improves the Ride Control System {5077}
2005/07/25
Improvements To The Medium Wheel Loader Ride Control Accumulator {5004, 5077}
2008/11/10
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Operation and Maintenance Manual
Ride Control Accumulator - Check
966G II and 972G II Wheel Loaders
Special Instruction
Installation Instructions for the 2Q-8230 Ride Control Kit {5004}
Installation Instructions for the 2Q-8230 Ride Control Kit {5004}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Systems Operation
Ride Control System
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System
Testing and Adjusting
Ride Control Accumulator - Test and Charge
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Ride Control Pressure Equalization Time - Adjust
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Disassembly and Assembly
Diverter Valve (Ride Control) - Remove
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Diverter Valve (Ride Control) - Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Service Magazine
A New Hose Assembly will Improve Service Life {5004, 5057}
2004/05/24
New Precharge Pressures Improve Operation of Ride Control Accumulators {5077}
2004/12/27
Specifications
Oil Filter (Hydraulic)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Check Valve (Hydraulic Oil Cooler Bypass)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Systems Operation
Oil Coolers and Cooling System Operation
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System
Disassembly and Assembly
Hydraulic Oil Cooler - Remove and Install
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Service Magazine
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
New Bracket Now Used for Fan Solenoid Valve {0635}
2004/11/15
An Improved Hydraulic Oil Cooler Is Now Available for Machines that Are Equipped with Axle Oil Coolers {1365, 1374}
2007/07/23
Improved Hydraulic Hose Routing {5057}
2006/04/10
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Operation and Maintenance Manual
Bucket Linkage and Loader Cylinder Bearings - Lubricate
966G II and 972G II Wheel Loaders
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Lift Cylinder
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Tilt Cylinder (Logging Machines)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Tilt Cylinder
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Coupler Cylinder
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Tilt Cylinder - High Lift
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Implement Cycle Time - Check
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Lift and Tilt Cylinder Drift - Check
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Lift Cylinder - Isolation and Drift Check
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Tilt Cylinder - Isolation and Drift Check
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Implement Hydraulic Service Mode
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Lift Cylinder - Remove and Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Tilt Cylinder - Remove and Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Service Magazine
New Guards Prevent Debris from Accumulating Under Lift Cylinders {7164}
2003/02/24
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Debris Baffle for the Lift Cylinders Is Available for 966 and 972 Machines {5102, 7164}
2013/05/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Operation and Maintenance Manual
Oil Filter - Inspect
966G II and 972G II Wheel Loaders
Hydraulic System Oil Filter - Replace
966G II and 972G II Wheel Loaders
Special Instruction
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Specifications
Oil Filter (Hydraulic)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
New Advanced Efficiency Filters Are Now Available for the Transmission Assembly and the Torque Converter Assembly Used on Certain Wheel Loaders {1408, 1435, 3004, 3006, 3067, 5068}
2011/07/07
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Special Instruction
An Improved Harness Assembly for the Tilt Positioner Is Now Available{5736}
An Improved Harness Assembly for the Tilt Positioner Is Now Available{5736}
Troubleshooting
MID 074 - CID 0350 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0350 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0350 - FMI 13
Payload Control System (PCS) 2.X
Disassembly and Assembly
Lift Kickout Control - Remove and Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Work Tool Positioner Control - Remove and Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Service Magazine
An Improved Tilt Sensor Linkage and Guard Is Available for Medium Wheel Loaders {5736}
2009/08/17
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Special Instruction
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Special Instruction
Procedure to install <NOBR>315-6321</NOBR>, <NOBR>315-6323</NOBR> Coupler Lines Group on Certain Wheel Loaders {5057, 6129}
Procedure to install 315-6321, 315-6323 Coupler Lines Group on Certain Wheel Loaders {5057, 6129}
Installation of the 333-7768 Coupler Lines Gp (Standard Lift){0679, 1408, 5057, 6129}
Installation of the 333-7768 Coupler Lines Gp (Standard Lift){0679, 1408, 5057, 6129}
Specifications
Diverter Valve (Quick Coupler)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Operation and Maintenance Manual
Hydraulic Tank Breaker Relief Valve - Clean
966G II and 972G II Wheel Loaders
Case Drain Screen (Strainer) (Steering Pump, Hydraulic Fan Pump, Motor) - Clean
966G II and 972G II Wheel Loaders
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Check Valve (Hydraulic Oil Cooler Bypass)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Solenoid Valve (Demand Fan)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Breaker Relief Valve
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
A New Breaker Relief Valve is Used {5118}
2002/12/16
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
New Bracket Now Used for Fan Solenoid Valve {0635}
2004/11/15
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Improved Hydraulic Hose Routing {5057}
2006/04/10
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Operation and Maintenance Manual
Ride Control Accumulator - Check
966G II and 972G II Wheel Loaders
Specifications
Check Valve (Ride Control)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Ride Control Accumulator
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Ride Control Accumulator
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Testing and Adjusting
Ride Control Accumulator - Test and Charge
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Disassembly and Assembly
Ride Control Accumulator - Remove and Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Service Magazine
A New Hose Assembly will Improve Service Life {5004, 5057}
2004/05/24
New Precharge Pressures Improve Operation of Ride Control Accumulators {5077}
2004/12/27
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications
Piston Motor (Hydraulic Fan)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Hydraulic Fan System
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System
Piston Motor (Hydraulic Fan)
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Hydraulic Fan Speed - Test and Adjust
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Piston Motor (Hydraulic Fan) - Disassemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Piston Motor (Hydraulic Fan) - Assemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Service Magazine
Correction to Testing and Adjusting , "Hydraulic Fan Speed - Test and Adjust" {1386, 1387}
2006/06/05
Operation and Maintenance Manual
Case Drain Screen (Strainer) (Steering Pump, Hydraulic Fan Pump, Motor) - Clean
966G II and 972G II Wheel Loaders
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Flushing Contaminated Wheel Loader Hydraulic Systems{5050, 5055, 5084}
Flushing Contaminated Wheel Loader Hydraulic Systems{5050, 5055, 5084}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE HYDRAULIC FAN PUMP GROUP ON CERTAIN 966G II AND 972G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE HYDRAULIC FAN PUMP GROUP ON CERTAIN 966G II AND 972G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE HYDRAULIC FAN PUMP GROUP ON CERTAIN 966G II AND 972G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEAL ON THE HYDRAULIC FAN PUMP GROUP ON CERTAIN 966G II AND 972G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
Technical Information Bulletin
IMPLEMENT GEAR PUMPS NOISE LEVEL
IMPLEMENT GEAR PUMPS NOISE LEVEL
PROCEDURE TO DETERMINE WHICH SEAL IS LEAKING ON STEERING PUMPS ON 950/962 Series G/G II &amp; 980 Series G/G II/H WHEEL LOADERS
PROCEDURE TO DETERMINE WHICH SEAL IS LEAKING ON STEERING PUMPS ON 950/962 Series G/G II & 980 Series G/G II/H WHEEL LOADERS
Specifications
Piston Pump (Hydraulic Fan)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Vane Pump (Implement)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Solenoid Valve (Demand Fan)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Gear Pump (Implement)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Vane Pump (Pilot, Brake)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
Systems Operation
Vane Pump
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System
Hydraulic Fan System
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System
Piston Pump (Hydraulic Fan)
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System
Gear Pump
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED MAIN STEERING PUMP ON 545, 545C WHEEL SKIDDERS, 950G II, 966G, 966G II, 972G, 972G II WHEEL LOADERS, 120G, 140G, 140H, 143H, 163H, 12G, 12H, 24H MOTOR GRADERS, 793, 793B, AND 793C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 950G, 950GII 962G, 962GII, 966G, 966GII, 972G, 972GII WHEEL LOADERS AND IT62G AND IT62GII INTEGRATED TOOL CARRIERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
PRODUCT SUPPORT PROGRAM THE REPLACING FAILED IMPLEMENT PUMPS ON CERTAIN 966G, 966GII, 972G AND 972GII WHEEL LOADERS
Testing and Adjusting
Hydraulic Fan Speed - Test and Adjust
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Torque Converter Stall and Implement Pump Double Stall - Test
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Pump Performance (Implement) - Test
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Disassembly and Assembly
Vane Pump (Pilot and Braking) - Disassemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Vane Pump (Pilot and Braking) - Assemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Vane Pump (Implement) - Remove
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Vane Pump (Implement) - Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Vane Pump (Implement) - Disassemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Vane Pump (Implement) - Assemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Piston Pump (Hydraulic Fan) - Disassemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Piston Pump (Hydraulic Fan) - Assemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Vane Pump (Pilot and Braking) - Remove
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Vane Pump (Pilot and Braking) - Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Piston Pump (Hydraulic Fan) - Remove
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Piston Pump (Hydraulic Fan) - Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Install
966G Series II and 972G Series II Wheel Loaders Engine Supplement
Service Magazine
Correction to Specifications , "Piston Pump (Hydraulic Fan)" {1387, 5070}
2003/03/17
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Correction to Testing and Adjusting , "Hydraulic Fan Speed - Test and Adjust" {1386, 1387}
2006/06/05
Wear that is Acceptable in Specific Gear Pumps {4007, 5073, 5073, 7516}
2008/05/12
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/08/19
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Operation and Maintenance Manual
Hydraulic System Oil Level - Check
966G II and 972G II Wheel Loaders
Hydraulic System Oil Filter - Replace
966G II and 972G II Wheel Loaders
Hydraulic System Oil - Change
966G II and 972G II Wheel Loaders
Hydraulic System Oil Sample - Obtain
966G II and 972G II Wheel Loaders
Case Drain Screen (Strainer) (Steering Pump, Hydraulic Fan Pump, Motor) - Clean
966G II and 972G II Wheel Loaders
Special Instruction
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Hydraulic System Cleanup Recommendations Following Catastrophic Component Failures on Wheel Loader Hydraulic Systems {0645, 0680, 0738, 0768, 5050, 5056, 5095}
Hydraulic System Cleanup Recommendations Following Catastrophic Component Failures on Wheel Loader Hydraulic Systems {0645, 0680, 0738, 0768, 5050, 5056, 5095}
Specifications
Hydraulic Tank
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Breaker Relief Valve
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Disassembly and Assembly
Hydraulic Tank - Disassemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Hydraulic Tank - Assemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Hydraulic Tank - Remove
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Hydraulic Tank - Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Service Magazine
A New Breaker Relief Valve is Used {5118}
2002/12/16
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Hydraulic System Cleanup Recommendations Following Catastrophic Component Failures on Wheel Loader Hydraulic Systems {0645, 0680, 0738, 0768, 5050, 5056, 5095}
Hydraulic System Cleanup Recommendations Following Catastrophic Component Failures on Wheel Loader Hydraulic Systems {0645, 0680, 0738, 0768, 5050, 5056, 5095}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Service Magazine
New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Operation and Maintenance Manual
Hydraulic Tank Breaker Relief Valve - Clean
966G II and 972G II Wheel Loaders
Specifications
Breaker Relief Valve
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Service Magazine
A New Breaker Relief Valve is Used {5118}
2002/12/16
Specifications
Check Valve (Hydraulic Oil Cooler Bypass)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Check Valve (Ride Control)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Special Instruction
Installation of the 2Q-8597 Control Valve Gp (Kit-3rd Valve) and the 2Q-8598 Control Valve Gp (Kit-3rd Valve){5051}
Installation of the 2Q-8597 Control Valve Gp (Kit-3rd Valve) and the 2Q-8598 Control Valve Gp (Kit-3rd Valve){5051}
Specifications
Main Control Valve
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Main Control Valve
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System
Testing and Adjusting
Main Control Valve (Electronic Technician) - Calibrate
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Main Control Valve (Caterpillar Monitoring System) - Calibrate
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Pilot Pressure to the Main Control Valve - Check
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Diverter Valve (Ride Control) - Isolation and Drift Check
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Disassembly and Assembly
Main Control Valve - Disassemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Main Control Valve - Assemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Main Control Valve and Mounting Plate - Remove
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Main Control Valve and Mounting Plate - Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Correction to Specifications , "Main Control Valve" {5051}
2006/03/27
Correction to Specifications , "Main Control Valve" {5051}
2006/09/11
New Material Is Now Used for the Main Control Valve {5051}
2007/04/02
Specifications
Relief Valve (Ride Control)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Diverter Valve (Quick Coupler)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Solenoid Valve (Quick Coupler)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Solenoid Valve (Ride Control)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Diverter Valve (Ride Control)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Diverter Valve (Ride Control)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Testing and Adjusting
Diverter Valve (Ride Control) - Isolation and Drift Check
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Disassembly and Assembly
Diverter Valve (Ride Control) - Remove
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Diverter Valve (Ride Control) - Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Diverter Valve (Ride Control) - Disassemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Diverter Valve (Ride Control) - Assemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Operation and Maintenance Manual
Hydraulic System Oil Sample - Obtain
966G II and 972G II Wheel Loaders
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Specifications
Pilot Valve (Oil Manifold) - Electrohydraulic System with an Auxiliary Function
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Pilot Valve (Oil Manifold) - Electrohydraulic System without an Auxiliary Function
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Systems Operation
Pilot Valve (Oil Manifold) - Electrohydraulic Machines
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System
Testing and Adjusting
Pilot System Pressure - Test
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Pilot Pressure to the Main Control Valve - Check
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Disassembly and Assembly
Pilot Operated Hydraulic Control (Joystick) - Disassemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Assemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Remove
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Pilot Valve (Oil Manifold) - Disassemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Pilot Valve (Oil Manifold) - Assemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Pilot Operated Hydraulic Control - Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Pilot Operated Hydraulic Control - Disassemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Pilot Operated Hydraulic Control - Assemble
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Pilot Valve (Oil Manifold) - Remove
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Pilot Valve (Oil Manifold) - Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Specifications
Pressure Reducing Valve - Electrohydraulic System
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Pressure Reducing Valve - Electrohydraulic System
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Service Magazine
A New Pressure Reducing Valve Is Now Available {5467}
2004/11/29
Specifications
Relief Valve (Ride Control)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Relief Valve (Main)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Relief Valve (Line)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Tool Operating Manual
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Systems Operation
Relief Valve
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System
Testing and Adjusting
Relief Valve (Main) - Test and Adjust
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Implement Hydraulic Service Mode
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Relief Valve (Line) - Test and Adjust
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Service Magazine
The Reliability of the Shuttle Valve Has Been Improved {4289, 5079}
2005/06/13
Technical Information Bulletin
Some Solenoid Valve Gp -Demand Fan may have failed on GII Series MWL.
Some Solenoid Valve Gp -Demand Fan may have failed on GII Series MWL.
Specifications
Solenoid Valve (Hydraulic Lockout)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Solenoid Valve (Pilot Proportioning)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Solenoid Valve (Quick Coupler)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Solenoid Valve (Ride Control)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Solenoid Valve (Demand Fan)
966G Series II Wheel Loader and 972G Series II
Wheel Loader Hydraulic System
Systems Operation
Solenoid Valves (Implement)
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System
Testing and Adjusting
Calibration
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Main Control Valve (Electronic Technician) - Calibrate
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Main Control Valve (Caterpillar Monitoring System) - Calibrate
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Maximum Current for Solenoid Valve (Tilt Back and Dump) (Caterpillar Monitoring System) - Calibrate
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Solenoid Valve (Tilt Back with Aggregate Autodig) (Caterpillar Monitoring System) - Calibrate
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
Troubleshooting
MID 082 - CID 0491 - FMI 03
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0491 - FMI 05
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0491 - FMI 06
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0492 - FMI 06
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0492 - FMI 03
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0492 - FMI 05
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0354 - FMI 05
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0354 - FMI 06
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0354 - FMI 03
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0354 - FMI 13
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0355 - FMI 03
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0355 - FMI 05
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0355 - FMI 06
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0355 - FMI 13
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0356 - FMI 03
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0356 - FMI 05
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0356 - FMI 06
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0356 - FMI 13
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0357 - FMI 03
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0357 - FMI 05
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0357 - FMI 06
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0357 - FMI 13
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0358 - FMI 03
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0358 - FMI 05
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0358 - FMI 06
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0491 - FMI 13
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0492 - FMI 13
966G Series II Wheel Loader and 972G Series II Wheel Loader Electrohydraulic System
MID 081 - CID 0149 - FMI 03
966G Series II Wheel Loader and 972G Series II
Wheel Loader Power Train
MID 081 - CID 0149 - FMI 05
966G Series II Wheel Loader and 972G Series II
Wheel Loader Power Train
MID 081 - CID 0149 - FMI 06
966G Series II Wheel Loader and 972G Series II
Wheel Loader Power Train
MID 081 - CID 0363 - FMI 03
966G Series II Wheel Loader and 972G Series II
Wheel Loader Power Train
MID 081 - CID 0363 - FMI 05
966G Series II Wheel Loader and 972G Series II
Wheel Loader Power Train
MID 081 - CID 0363 - FMI 06
966G Series II Wheel Loader and 972G Series II
Wheel Loader Power Train
Service Magazine
Improved Coil Now Available {1554, 3139, 5479}
2005/11/07
A New Coil Assembly is Now Used {5479}
2011/05/04
Technical Information Bulletin
Some Solenoid Valve Gp -Demand Fan may have failed on GII Series MWL.
Some Solenoid Valve Gp -Demand Fan may have failed on GII Series MWL.
Special Instruction
Installation Instructions for the 2Q-8246 Fan Control Ar (Reversing Fan Kit) and the 2Q-8247 Fan Control Ar (Reversing Fan Kit) {1386, 138R}
Installation Instructions for the 2Q-8246 Fan Control Ar (Reversing Fan Kit) and the 2Q-8247 Fan Control Ar (Reversing Fan Kit) {1386, 138R}

Truck sale:

Caterpillar 966GII, Construction
64,000 USD 
Caterpillar 966GII, Construction
- Wheel Loaders
H.O. PENN MACHINERY CO., INC.
Caterpillar 966GII, Construction
 
Caterpillar 966GII, Construction
- Wheel Loaders
NMC
Caterpillar 966GII, Construction
55,000 
Caterpillar 966GII, Construction
- Wheel Loaders
NMC
Caterpillar 966GII, Construction
75,800 
Caterpillar 966GII, Construction
- Wheel Loaders
EMPIRE MACHINERY
Caterpillar 966GII, Construction
73,750 
Caterpillar 966GII, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.