AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

103-5526 CONTROL GP-MONITOR -DIMMER S/N AXG1-UP PART OF 195-6255 WIRING GP-CAB 980G II WHEEL LOADER


OPERATOR STATION
MONITOR GP
CONTROL GP-STEERING
ELECTRICAL AND STARTING SYSTEM
CONTROL GP-UNPROGRAMMED
SWITCH GP
OPERATOR STATION
DOOR GP

WHEEL LOADER 980G II WHEEL LOADER AXG
 2Q-8478 Steel Mill Arrangement Custom Product Support Literature for the 980G Series II Wheel Loader AXG00001-UP (MACHINE) SEBC1344 980G II AXG   (1999)

OPERATOR STATION

MONITOR GP
192-6189 WIRING GP-CAB
WIRING GP-CAB
195-6255 WIRING GP-CAB
WIRING GP-CAB
195-6255 WIRING GP-CAB
WIRING GP-CAB
195-6255 WIRING GP-CAB
233-7718 CONTROL GP-DISPLAY ELECTRONIC
CONTROL GP-MONITOR
103-5526 CONTROL GP-MONITOR
CONTROL GP-UNPRGMED MONITOR
154-7443 CONTROL GP-UNPRGMED MONITOR
MODULE GP-QUAD GAUGE
166-6928 MODULE GP-QUAD GAUGE
MODULE GP-SPEEDOMETER & TACH
190-3730 MODULE GP-SPEEDOMETER & TACH
 

#SEBC13440220
 

103-5526: CONTROL GP-MONITOR

103-5526 CONTROL GP-MONITOR -DIMMER
S/N AXG1-UP
PART OF 195-6255 WIRING GP-CAB
i00188199 SEBC1344
1035526 CONTROL GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9132 [2] SCREW-HEX FLANGE (6-32X0.187-IN)  
2. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
3. 8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
 

#SEBC13440221
 

171-8885: CONTROL GP-STEERING

171-8885 CONTROL GP-STEERING -COMMAND CONTROL STEERING
S/N AXG1-UP
PART OF 191-8568 CAB AR
i01447624 SEBC1344
1718885 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-2812 [1] WASHER (0.06-MM THK)  
2. 2S-2160 [1] RING-RETAINING  
3. 2V-7859 [1] BEARING  
4. 3S-2093 [1] STRAP-CABLE  
5. 6P-0593 [2] BEARING-ROLLER  
6. 105-3477 M [1] BOLT-SOCKET HEAD (M10X1.5X45-MM)  
7. 112-2014 [1] CLAMP  
8. 112-9716 [1] LEVER  
9. 114-5309 [1] COVER AS (RH)(RH)  
10. 114-5312 [1] COVER AS (LH)(LH)  
11. 115-2014 [1] SHAFT  
12. 117-6056 [1] HOUSING AS  
13. 118-8078 [2] CLIP  
14. 123-6713 [1] WEDGE  
15. 124-0065 [1] BLOCK  
16. 155-6526 [1] SLEEVE  
17. 156-0549 Y [1] STEERING COLUMN GP  
18. 195-5869 Y [1] STEERING WHEEL GP  
19. 1B-8705 [1] KEY-WOODRUFF  
20. 4D-9517 [1] CLIP  
21. 6V-5683 M [4] BOLT (M6X1X16-MM)  
22. 7X-2619 M [3] BOLT (M6X1X10-MM)  
23. 8T-1159 M [4] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
24. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
26. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
27. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
28. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC13440222
 

219-7619: CONTROL GP-STEERING

219-7619 CONTROL GP-STEERING -COMMAND CONTROL STEERING
S/N AXG1-UP
PART OF 191-8568 CAB AR
Type 1
i01913902 SEBC1344
2197619 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-2812 [1] WASHER (0.06-MM THK)  
2. 2S-2160 [1] RING-RETAINING  
3. 2V-7859 [1] BEARING  
4. 3S-2093 [1] STRAP-CABLE  
5. 6P-0593 [2] BEARING-ROLLER  
6. 105-3477 M [1] BOLT-SOCKET HEAD (M10X1.5X45-MM)  
7. 112-2014 [1] CLAMP  
8. 112-9716 [1] LEVER  
9. 114-5309 [1] COVER AS (RH)  
10. 114-5312 [1] COVER AS (LH)  
11. 115-2014 [1] SHAFT  
12. 117-6056 [1] HOUSING AS  
13. 118-8078 [2] CLIP  
14. 123-6713 [1] WEDGE  
15. 124-0065 [1] BLOCK  
16. 155-6526 [1] SLEEVE  
17. 156-0549 Y [1] STEERING COLUMN GP  
18. 1B-8705 [1] KEY-WOODRUFF  
19. 218-0654 Y [1] STEERING WHEEL GP  
20. 4D-9517 [1] CLIP  
21. 6V-5683 M [4] BOLT (M6X1X16-MM)  
22. 7X-2619 M [3] BOLT (M6X1X10-MM)  
23. 8T-1159 M [4] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
24. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
26. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
27. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
28. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC13440223
 

219-7619: CONTROL GP-STEERING

219-7619 CONTROL GP-STEERING -COMMAND CONTROL STEERING
S/N AXG1-UP
PART OF 191-8568 CAB AR
Type 2
i02567099 SEBC1344
2197619 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 105-3477 M [1] BOLT-SOCKET HEAD (M10X1.5X45-MM)  
3. 112-2014 [1] CLAMP  
4. 112-9716 [1] LEVER  
5. 114-5309 [1] COVER AS (RH)  
6. 114-5312 [1] COVER AS (LH)  
7. 118-8078 [2] CLIP  
8. 123-6713 [1] WEDGE  
9. 124-0065 [1] BLOCK  
10. 155-6526 [1] SLEEVE  
11. 297-4928 CY [1] STEERING COLUMN GP  
12. 1B-8705 [1] KEY-WOODRUFF  
13. 218-0654 Y [1] STEERING WHEEL GP  
14. 4D-9517 [1] CLIP  
15. 6V-5683 M [4] BOLT (M6X1X16-MM)  
16. 7X-2619 M [3] BOLT (M6X1X10-MM)  
17. 8T-1159 M [4] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
18. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
20. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
21. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
22. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
23. 6V-5219 M [1] BOLT (M8X1.25X40-MM)  
24. 8T-7963 M [1] LOCKNUT (M8X1.25-THD)  
25. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
26. 255-8545 [2] WASHER-RUBBER (21.5X55X2-MM THK)  
27. 297-4929 [1] ADAPTER AS  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC13440224
 

154-7443: CONTROL GP-UNPRGMED MONITOR

154-7443 CONTROL GP-UNPRGMED MONITOR -CATERPILLAR MONITORING SYSTEM
S/N AXG1-UP
PART OF 195-6255 WIRING GP-CAB
i02234769 SEBC1344
1547443 CONTROL GP-UNPRGMED MONITOR Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 252-4501 [1] CONTROL GP-UNPRGMED MONITOR (CATERPILLAR MONITORING SYSTEM)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBC13440225
 

2Q-8531: CONTROL GP-XMSN OVERRIDE

2Q-8531 CONTROL GP-XMSN OVERRIDE -CUSTOM
S/N AXG1-UP
PART OF 2Q-8478 STEEL MILL AR
i01759616 SEBC1344
2Q8531 CONTROL GP-XMSN OVERRIDE Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-4698 [1] RESISTOR  
2. 2N-4699 [2] WASHER  
3. 2N-4700 [1] BRACKET-RESISTOR  
4. 2N-4721 [2] WASHER  
5. 2N-4722 [1] BOLT  
6. 2Q-8228 [1] HARNESS AS-TRANSMISSION  
  8C-6313 [2] PLUG AS-CONNECTOR (5-PIN)  
7. 2S-3440 [2] CLAMP-HOSE  
8. 3E-5239 [3] RELAY AS (24-VOLT)  
9. 6V-9497 [4] WASHER-HARD (3.2X6X0.5-MM THK)  
10. 8F-1434 [1] LOCKWASHER  
11. 070-0587 [1] COVER AS  
12. 115-8109 [2] SPLICE-WIRE  
13. 132-8485 [1] NUT-RING  
14. 134-9565 [1] SWITCH AS-TOGGLE (4-POLE)(TRANSMISSION CONTROL OVERRIDE)  
  3L-8187 [12] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [12] SCREW-MACHINE (6-32X0.25-IN)  
15. 189-3158 [1] SUPPRESSOR-ARC  
16. 189-8044 [1] PLATE  
17. 189-8045 [1] COVER  
18. 189-8047 [1] PLATE AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
19. 189-8058 [1] HARNESS AS-TRANSMISSION (OVERRIDE CONTROL)  
  3E-5136 [1] RECEPTACLE AS-CONNECTOR (5-PIN)  
  3E-5519 [3] PLUG AS-CONNECTOR (5-PIN)  
  7G-7918 [2] PLUG-SEAL  
20. 189-8154 [1] GUARD-SWITCH  
21. 211-8755 [1] FILM (TRANSMISSION CONTROL)  
22. 221-5403 [1] FILM-PANEL  
23. 130-5300 [1] CLIP  
24. 151-4917 [2] SCREW (8-32X0.63-IN)  
25. 4B-2043 [4] NUT (8-32-THD)  
26. 4P-4251 [1] GASKET  
27. 5C-9553 M [3] BOLT (M6X1X16-MM)  
28. 5P-8395 [4] SCREW-MACHINE  
29. 6D-3479 [1] CLIP  
30. 7S-1197 [2] SCREW-MACHINE (8-32X0.5-IN)  
31. 8L-5832 [1] NUT-HEX (10-32-THD)  
32. 8M-2773 [2] CLIP (LOOP)  
33. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
34. 8T-4133 M [1] NUT (M10X1.5-THD)  
35. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
36. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
37. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
38. 9B-7233 [4] LOCKWASHER  
39. 9X-2026 [3] WASHER (6.5X17X1-MM THK)  
40. 2Q-0604 E [1] INSULATION (91CM)  
    *****STANDARD REMOVAL*****
  177-3187 J [1] PLATE  
  197-2072 L [1] COVER  
  206-5040 N [1] FILM-PANEL (LH)  
  E   ORDER BY THE CENTIMETER
  J   PART OF STANDARD WIRING GP-CAB
  L   PART OF STANDARD LINER GP-CAB
  M   METRIC PART
  N   PART OF STANDARD PANEL GP-INSTRUMENT
 

#SEBC13440226
 

179-8267: DOOR GP-CAB

179-8267 DOOR GP-CAB -LH
S/N AXG1-UP
PART OF 203-2507 DOOR GP-CAB
i01448147 SEBC1344
1798267 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-7803 [2] PLUG-BUTTON  
2. 6V-7636 [2] PIN AS-SPRING  
3. 225-3755 [1] GASKET  
4. 108-5471 [1] CLEVIS  
5. 109-5008 [1] BUMPER-CONICAL  
6. 170-7709 [1] HANDLE AS-DOOR  
7. 185-7523 Y [1] WINDOW GP-CAB (SLIDING WINDOW, LH DOOR)  
8. 204-7366 [1] BRACKET AS  
9. 187-1461 [1] DOOR AS (LH)  
10. 187-1466 [1] ROD  
11. 187-1469 [1] GLASS (CAB DOOR, LH)  
12. 187-1474 [1] BRACKET  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
13. 252-5019 [1] LATCH AS  
14. 5C-7261 M [1] NUT (M8X1.25-THD)  
15. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
16. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
17. 3E-4316 M [1] SCREW-MACHINE (M6X1X45-MM)  
18. 9X-6155 M [3] BOLT-SOCKET HEAD (M6X1X16.7-MM)  
19. 3E-3805 E SEAL (470-CM)  
20. 6V-8185 [1] NUT (1/4-20-THD)  
21. 214-9456 [1] PLATE  
22. 4E-2853 B [4] WASHER (6.4X12.5X0.8-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBC13440227
 

199-0519: DOOR GP-CAB

199-0519 DOOR GP-CAB -CUSTOM
S/N AXG1-UP
LEFT HAND
PART OF 207-5946 DOOR GP-CAB
i01762711 SEBC1344
1990519 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-7803 B [2] PLUG-BUTTON  
2. 6V-7636 [2] PIN AS-SPRING  
3. 8Y-6378 [1] SEAL-HANDLE  
4. 108-5471 [1] CLEVIS  
5. 109-5008 [1] BUMPER-CONICAL  
6. 170-7709 [1] HANDLE AS-DOOR  
  8Y-4501 [1] SPRING-HANDLE  
  8Y-6338 [2] BRACKET-MOUNTING  
7. 187-1461 [1] DOOR AS (LH)  
  205-0926 [2] HINGE  
8. 187-1466 [1] ROD  
9. 187-1474 [1] BRACKET  
10. 189-5110 [1] LATCH AS  
11. 199-0521 [1] GLASS  
12. [1] PLATE  
13. 204-7366 [1] BRACKET AS  
14. 214-9456 [1] PLATE  
15. 3E-4316 M [1] SCREW-MACHINE (M6X1X45-MM)  
16. 5C-7261 M [1] NUT (M8X1.25-THD)  
17. 6V-8185 [1] NUT (1/4-20-THD)  
18. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
19. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
20. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
21. 9X-6155 M [3] BOLT-SOCKET HEAD (M6X1X16.7-MM)  
22. 5P-5768 D SEAL (3-M)  
23. 3E-3805 E SEAL (470-CM)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBC13440228
 

199-0520: DOOR GP-CAB

199-0520 DOOR GP-CAB -CUSTOM
S/N AXG1-UP
RIGHT HAND
PART OF 207-5946 DOOR GP-CAB
i01762895 SEBC1344
1990520 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-7803 [2] PLUG-BUTTON  
2. 103-1122 [1] MOUNT-LATCH  
3. 185-7538 [1] DOOR AS (RH)  
  205-0926 [2] HINGE  
4. 199-0521 [1] GLASS  
5. [1] PLATE  
6. 119-9653 [1] WASHER-NYLON (13X35X3.2-MM THK)  
7. 9X-2041 M [1] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
8. 5P-5768 D SEAL (3-M)  
9. 3E-3805 E SEAL (470-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBC13440229
 

203-2507: DOOR GP-CAB

203-2507 DOOR GP-CAB
S/N AXG1-UP
PART OF 190-5152 ROPS GP-ENCLOSED
i01483243 SEBC1344
  For full view, you need register

Parts for your 980G II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  179-8267 Y [1] DOOR GP-CAB (LH)  
  213-7109 Y [1] DOOR GP-CAB (RH)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 980G II :

CONTROL GP-ELECTROHYDRAULIC
208-3915 CONTROL GP-ELECTROHYDRAULIC
CONTROL GP-ELECTROHYDRAULIC
208-3915 CONTROL GP-ELECTROHYDRAULIC
233-7718 CONTROL GP-DISPLAY ELECTRONIC
CAB AS
199-3080 CAB AS
207-0582 CAB AR
191-8568 CAB AR
ARMREST GP
188-9820 ARMREST GP
ARM GP-WINDOW WIPER
214-7635 ARM GP-WINDOW WIPER
CONTROL GP-STEERING
171-8885 CONTROL GP-STEERING
CONTROL GP-STEERING
219-7619 CONTROL GP-STEERING
CONTROL GP-STEERING
219-7619 CONTROL GP-STEERING
CONTROL GP-UNPRGMED MONITOR
154-7443 CONTROL GP-UNPRGMED MONITOR
CONTROL GP-XMSN OVERRIDE
2Q-8531 CONTROL GP-XMSN OVERRIDE
DOOR GP-CAB
179-8267 DOOR GP-CAB
DOOR GP-CAB
199-0519 DOOR GP-CAB
DOOR GP-CAB
199-0520 DOOR GP-CAB

Truck sale:

Caterpillar 980G II
 
Caterpillar 980G II
- Wheel Loaders
FINNING CANADA
Caterpillar 980GII, Wheel Loaders, Construction
57,675 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 980G II, Wheel Loaders, Construction
53,500 
Caterpillar 980G II, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 980GII, Wheel Loaders, Construction
54,500 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Caterpillar 980GII, Wheel Loaders, Construction
49,500 
Caterpillar 980GII, Wheel Loaders, Construction
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.