AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2Q-7856 Air Conditioning Kit Custom Product Support Literature for the 950G Series II, the 962G Series II Wheel Loaders and the IT62G Series II Integrated Toolcarrier AXR00001-UP (MACHINE) OPERATOR STATION Caterpillar SIS



WHEEL LOADER 950G II WHEEL LOADER AXR
 2Q-7856 Air Conditioning Kit Custom Product Support Literature for the 950G Series II, the 962G Series II Wheel Loaders and the IT62G Series II Integrated Toolcarrier AXR00001-UP (MACHINE) SEBC1351 950G II AXR   (2002)

Parts group 950G II:

  For full view, you need register
OPERATOR STATION
AIR CONDITIONER GP
AIR CONDITIONER GP
2Q-7856 AIR CONDITIONER GP
2Q-7856 AIR CONDITIONER GP -CUSTOM
KIT-AIR CONDITIONER
COMPRESSOR GP-REFRIGERANT
163-0872 COMPRESSOR GP-REFRIGERANT
163-0872 COMPRESSOR GP-REFRIGERANT
PART OF 2Q-7856 AIR CONDITIONER GP

Information:

(For parts list, see above)

Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Receiver Dryer (Refrigerant) - Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Installation Instructions for an 2Q-7856 Air Conditioner Gp (Kit) for the 950G Series II and the 962G Series II Wheel Loaders{7320}
Installation Instructions for an 2Q-7856 Air Conditioner Gp (Kit) for the 950G Series II and the 962G Series II Wheel Loaders{7320}
Functional Test for the Refrigerant Dryer{7322}
Functional Test for the Refrigerant Dryer{7322}
Assembly Instructions for Installing The Air Mix Door {7304, 7320}
Assembly Instructions for Installing The Air Mix Door {7304, 7320}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HVAC UNIT BLEND DOOR ON CERTAIN MEDIUM WHEEL LOADERS AND FORESTRY MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HVAC UNIT BLEND DOOR ON CERTAIN MEDIUM WHEEL LOADERS AND FORESTRY MACHINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Tightening of the Swivel Nut for the AC Dryer {7322}
Tightening of the Swivel Nut for the AC Dryer {7322}
Specifications
Refrigerant Compressor
Air Conditioning and Heating R134a for All Caterpillar Machines
System Capacities for Refrigerant (Medium Wheel Loaders)
Air Conditioning and Heating R134a for All Caterpillar Machines
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HVAC UNIT BLEND DOOR ON CERTAIN MEDIUM WHEEL LOADERS AND FORESTRY MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HVAC UNIT BLEND DOOR ON CERTAIN MEDIUM WHEEL LOADERS AND FORESTRY MACHINES
Service Letter-Asia
Systems Operation
Refrigerant Compressor
Air Conditioning and Heating R134a for All Caterpillar Machines
Glossary of Terms
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Expansion Valve System
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Orifice Tube System
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Condenser
Air Conditioning and Heating R134a for All Caterpillar Machines
Evaporator Coil
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor Protection System
Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Air Conditioning System
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Expansion Valve
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Accumulator
Air Conditioning and Heating R134a for All Caterpillar Machines
In-line Refrigerant Dryer
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Receiver-Dryer
Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Heating System
Air Conditioning and Heating R134a for All Caterpillar Machines
Temperature Control
Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Refrigerant
Air Conditioning and Heating R134a for All Caterpillar Machines
Service Intervals
Air Conditioning and Heating R134a for All Caterpillar Machines
Condensate Drainage System
Air Conditioning and Heating R134a for All Caterpillar Machines
Cab Pressurization and Filtration System
Air Conditioning and Heating R134a for All Caterpillar Machines
General Information
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Orifice Tube Assembly
Air Conditioning and Heating R134a for All Caterpillar Machines
Systems Operation - Fundamentals
Expansion Valve System (Thermostatic Switch)
950G Series II Wheel Loader Air Conditioning and Heating
Principles of Operation
950G Series II Wheel Loader Air Conditioning and Heating
Machine Air Conditioning Service Procedures
950G Series II Wheel Loader Air Conditioning and Heating
300B Series Excavator Air Conditioning System
950G Series II Wheel Loader Air Conditioning and Heating
Principles of Heat Transfer
950G Series II Wheel Loader Air Conditioning and Heating
Orifice Tube System
950G Series II Wheel Loader Air Conditioning and Heating
Expansion Valve System (Thermostatic)
950G Series II Wheel Loader Air Conditioning and Heating
Expansion Valve System (H Block)
950G Series II Wheel Loader Air Conditioning and Heating
Air Conditioning Materials and Service Tools
950G Series II Wheel Loader Air Conditioning and Heating
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HVAC UNIT BLEND DOOR ON CERTAIN MEDIUM WHEEL LOADERS AND FORESTRY MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HVAC UNIT BLEND DOOR ON CERTAIN MEDIUM WHEEL LOADERS AND FORESTRY MACHINES
Testing and Adjusting
Refrigerant Recovery
Air Conditioning and Heating R134a for All Caterpillar Machines
Manifold Gauge Set (Refrigerant) - Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant System - Charge
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant System - Evacuate
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Leakage - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Manifold Gauge Set (Refrigerant) - Remove
Air Conditioning and Heating R134a for All Caterpillar Machines
Electronic Heat Control - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning Performance - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Oil - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant System - Flush
Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Testing and Adjusting
Air Conditioning and Heating R134a for All Caterpillar Machines
Compressor Protection System - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Heater Performance - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting
Required Tools
Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
General Troubleshooting Information
Air Conditioning and Heating R134a for All Caterpillar Machines
Visual Inspection (Troubleshooting)
Air Conditioning and Heating R134a for All Caterpillar Machines
Heating System Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting Condensate Drainage System
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning System Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting Heating and Air Conditioning Control System
Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control Panel Troubleshooting - 584 and 584HD Forwarders
Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control System (ECM Controlled) Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
General Troubleshooting Information
Air Conditioning and Heating R134a for All Caterpillar Machines
Disassembly and Assembly
Refrigerant Expansion Valve - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Compressor - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Accumulator - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Evaporator Coil and Heater Coil - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Evaporator Coil and Heater Coil - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Refrigerant Compressor - Remove and Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Refrigerant Condenser - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement
Air Conditioner Lines - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Machine Preparation for Disassembly and Assembly
Air Conditioning and Heating R134a for All Caterpillar Machines
In-Line Refrigerant Dryer - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Receiver-Dryer - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
General Information
Air Conditioning and Heating R134a for All Caterpillar Machines
Refrigerant Orifice Tube Assembly - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines
Service Magazine
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2003/05/05
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
Heater and Air Conditioner Kits Are Now Available {7304, 7320}
2004/09/27
Correction to Service Magazine , "Heater and Air Conditioner Kits are Now Available" {7304, 7320}
2004/11/01
The Heater and Air Conditioner Fan Motor has been Enhanced to Improve Motor Life {5927, 7304, 7320}
2006/03/13
An Enhanced Diagnostic Procedure is Now Available for the Air Conditioner Dryer {7322}
2007/06/04
New Cab Temperature Control Potentiometer Is Now Available {5721}
2007/09/17
A New Door for Blending the Air is Available for the AC Unit on Certain Machines {7320}
2008/05/05
A New Drain Tube Assembly for the Air Conditioning Has Been Introduced on Certain Medium Wheel Loader Machines {7320}
2009/10/21
Improved HVAC Blower Motor Assembly Is Now Used For Certain Wheel Loader and Track-Type Tractor {5927, 7304, 7320}
2010/12/06
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/06/06
An Air Conditioner Kit for Use When Servicing the Air Conditioning System Is Now Available {7320, 7320}
2012/08/24
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/08/19
Operation and Maintenance Manual
Rollover Protective Structure (ROPS) - Inspect
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Operator Controls
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Replacing Bonded Windows {7310}
Replacing Bonded Windows {7310}
Improving the Environment of the Operator{7301}
Improving the Environment of the Operator{7301}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Specifications
Cab Mounting
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Disassembly and Assembly
Cab - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Cab - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Service Magazine
Improved Radio Speaker Assembly Is Now Available for Certain Cat Products {7301, 7338}
2012/01/31
A Repair Kit is Now Available for Cabs with Nonmetallic Floors {7301}
2003/06/30
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
2009/11/02
Technical Information Bulletin
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Service Magazine
Four Bearings Are Now Used On the Hydraulic Control Support (Armrest) {5258}
2008/01/21
Special Instruction
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>&reg;</SUP> Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Service Magazine
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>&reg;</SUP> Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Operation and Maintenance Manual
Steering Shaft (Command Control Steering) - Lubricate
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Procedure to Install the Horn Button{7332, 7402}
Procedure to Install the Horn Button{7332, 7402}
Specifications
Steering Control
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System
Steering Wheel
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System
Testing and Adjusting
Steering Time - Check - Command Control Steering
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System
Command Control Steering - Adjust
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System
Disassembly and Assembly
Steering Wheel - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Steering Shaft - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Service Magazine
Modification for the Steering Shaft Assembly {4343}
2005/12/26
Maintenance Instruction Has Been Added for HMU Steering {4310, 4343}
2007/03/12
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/01/27
Special Instruction
Replacing Bonded Windows {7310}
Replacing Bonded Windows {7310}
Service Magazine
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Operation and Maintenance Manual
Cab Air Filter - Clean/Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Service Magazine
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2003/05/05
Special Instruction
Installation Instructions for the 264-3559 Window Guard Ar (KIT) and the 265-3936 Window Guard Ar (Kit){7165, 7182, 7310}
Installation Instructions for the 264-3559 Window Guard Ar (KIT) and the 265-3936 Window Guard Ar (Kit){7165, 7182, 7310}
Installation Instructions for the Handrail and Step Gp (Kit) (Cab, Front Access) {7254, 7256}
Installation Instructions for the Handrail and Step Gp (Kit) (Cab, Front Access) {7254, 7256}
Custom Service Information
Special Instruction
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>&reg;</SUP> Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Service Magazine
Improved Modular Handle Group Is Now Used {5063, 5705}
2005/07/11
An Improved Handle Control Group is Now Available {5063, 5705}
2006/11/20
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>&reg;</SUP> Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Special Instruction
Assembly Instructions for Installing The Air Mix Door {7304, 7320}
Assembly Instructions for Installing The Air Mix Door {7304, 7320}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HVAC UNIT BLEND DOOR ON CERTAIN MEDIUM WHEEL LOADERS AND FORESTRY MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HVAC UNIT BLEND DOOR ON CERTAIN MEDIUM WHEEL LOADERS AND FORESTRY MACHINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HVAC UNIT BLEND DOOR ON CERTAIN MEDIUM WHEEL LOADERS AND FORESTRY MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HVAC UNIT BLEND DOOR ON CERTAIN MEDIUM WHEEL LOADERS AND FORESTRY MACHINES
Service Letter-Asia
Systems Operation
Glossary of Terms
Air Conditioning and Heating R134a for All Caterpillar Machines
Identifying the Heating System
Air Conditioning and Heating R134a for All Caterpillar Machines
Service Intervals
Air Conditioning and Heating R134a for All Caterpillar Machines
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HVAC UNIT BLEND DOOR ON CERTAIN MEDIUM WHEEL LOADERS AND FORESTRY MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HVAC UNIT BLEND DOOR ON CERTAIN MEDIUM WHEEL LOADERS AND FORESTRY MACHINES
Testing and Adjusting
Electronic Heat Control - Test
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting
Required Tools
Air Conditioning and Heating R134a for All Caterpillar Machines
Heating System Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Troubleshooting Heating and Air Conditioning Control System
Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control Panel Troubleshooting - 584 and 584HD Forwarders
Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control System (ECM Controlled) Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Service Magazine
Heater and Air Conditioner Kits Are Now Available {7304, 7320}
2004/09/27
Correction to Service Magazine , "Heater and Air Conditioner Kits are Now Available" {7304, 7320}
2004/11/01
The Heater and Air Conditioner Fan Motor has been Enhanced to Improve Motor Life {5927, 7304, 7320}
2006/03/13
Improved HVAC Blower Motor Assembly Is Now Used For Certain Wheel Loader and Track-Type Tractor {5927, 7304, 7320}
2010/12/06
New Gauges Available {7450}
2010/07/08
An Improved External Mirror Bracket is Available for Medium Wheel Loaders {7319}
2008/07/21
Operation and Maintenance Manual
Payload Control System (PCS) - If Equipped
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Monitoring System
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Display - Clean
Work Area Vision System
Display Position Adjustment
Work Area Vision System
Display Picture Adjustment - Select Display Settings
Work Area Vision System
Display Description
Work Area Vision System
General Information
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Weighing Material
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Display Description
Medium Wheel Loaders (MWL) Payload Control System (MWL)
System Setup
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Caterpillar Reference Material
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Additional Reference Material
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Warranty Information
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Calibration
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Operating Modes
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Special Instruction
Supplemental Documentation for the Payload Control System{7494}
Supplemental Documentation for the Payload Control System{7494}
Installation Instructions for the 267-6573 Camera Ar (Kit){7347, 7348}
Installation Instructions for the 267-6573 Camera Ar (Kit){7347, 7348}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
WAVS Installation Guide for Generic Applications{7347, 7348}
WAVS Installation Guide for Generic Applications{7347, 7348}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Procedure to Retrofit a Diesel Particulate Filter (DPF) for Emissions on a IT62G Integrated Toolcarrier and a 950G / 962G Series II Wheel Loader{108F, 1091, 7490}
Procedure to Retrofit a Diesel Particulate Filter (DPF) for Emissions on a IT62G Integrated Toolcarrier and a 950G / 962G Series II Wheel Loader{108F, 1091, 7490}
Payload Control System Printer {7494, 749P}
Payload Control System Printer {7494, 749P}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of Cat<SUP>&reg;</SUP> Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of Cat® Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
WAVS Generic Installation Guide for Certain Cat<SUP>&reg;</SUP> Products{7347, 7348}
WAVS Generic Installation Guide for Certain Cat® Products{7347, 7348}
WAVS Light Duty Installation Guide for Certain Cat<SUP>&reg;</SUP> Products{7347, 7348}
WAVS Light Duty Installation Guide for Certain Cat® Products{7347, 7348}
Installation of G610 Hardware for Cat<SUP>&reg;</SUP> Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Systems Operation
Service Meter Mode
Caterpillar Monitoring System
Odometer Mode
Caterpillar Monitoring System
Numeric Readout Mode
Caterpillar Monitoring System
Tattletale Mode
Caterpillar Monitoring System
Units Mode
Caterpillar Monitoring System
Setup Mode
Caterpillar Monitoring System
General Information
Caterpillar Monitoring System
Component Description
Caterpillar Monitoring System
Related Components
Caterpillar Monitoring System
Scrolling Mode
Caterpillar Monitoring System
Display Components
Caterpillar Monitoring System
Speedometer/Tachometer Module
Caterpillar Monitoring System
Warning Operation
Caterpillar Monitoring System
Main Display Module
Caterpillar Monitoring System
Service Mode
Caterpillar Monitoring System
System Setup Procedure
Payload Control System (PCS) 2.X
Normal Mode
Caterpillar Monitoring System
Harness Code Mode
Caterpillar Monitoring System
Alert Indicator Description
Caterpillar Monitoring System
Quad Gauge Module
Caterpillar Monitoring System
Monitoring System (Hydraulic Functions)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Monitoring System (Braking Functions)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System
Monitoring System (Power Train Functions)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Monitoring System (Steering Functions)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System
Tachometer Mode
Caterpillar Monitoring System
Calibration Mode
Caterpillar Monitoring System
Maintenance Mode
Caterpillar Monitoring System
Component Description
Work Area Visual System
Configuration
Work Area Visual System
General Information
Work Area Visual System
Modes of Operation
Work Area Visual System
System Setup
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Additional Key Functions
Payload Control System (PCS) 2.X
Component Description
Payload Control System (PCS) 2.X
Payload Electronic Control Module
Payload Control System (PCS) 2.X
Keypad
Payload Control System (PCS) 2.X
Service Display Mode
Payload Control System (PCS) 2.X
Calibration (Fine Tune)
Payload Control System (PCS) 2.X
Normal Weighing Operation
Payload Control System (PCS) 2.X
General Information
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Modes of Operation
Caterpillar Monitoring System
Sensors
Payload Control System (PCS) 2.X
Calibration
Payload Control System (PCS) 2.X
Payload Control System/PC Off-Board System
Payload Control System (PCS) 2.X
Component Description
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Zero Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Reweigh Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Download Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Weighing Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
General Information
Payload Control System (PCS) 2.X
Custom Service Information
Installation Instructions for the 267-6573 Camera Ar (Kit){7347, 7348}
Installation Instructions for the 267-6573 Camera Ar (Kit){7347, 7348}
Field Installation of the Payload Control System{7494}
Field Installation of the Payload Control System{7494}
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 950F, 950G, 950H, 950K, 960F, 962G, 962H, 962H, 962K, 966E, 966F, 966G, 966H, 966H, 966K, 970F, 972G, 972H, 972K, 980C, 980F, 980G, 980H, AND 980K WHEEL LOADERS, IT62G, AND IT62H�INTEGRATED TOOLCARRIERS
Testing and Adjusting
Glossary of Terms
Caterpillar Monitoring System
System Self Test
Caterpillar Monitoring System
Module - Replace
Caterpillar Monitoring System
Main Display Module Initialization - Adjust
Caterpillar Monitoring System
Wiring Harness (Open Circuit) - Test
Payload Control System (PCS) 2.X
Wiring Harness (Short Circuit) - Test
Payload Control System (PCS) 2.X
Connector Contact Description of Main Display Module
Caterpillar Monitoring System
Main Display Module - Flash Program
Caterpillar Monitoring System
Implement Hydraulic Service Mode
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Electrical Connector - Inspect
Payload Control System (PCS) 2.X
Electronic Control Module (ECM) - Flash Program
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
System Schematic
Work Area Visual System
Troubleshooting
Work Area Visual System
General Information
Work Area Visual System
System Tests
Work Area Visual System
Electronic Control Module (ECM) - Replace
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Payload Electronic Control Module - Replace
Payload Control System (PCS) 2.X
Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X
Battery (Internal Backup) - Replace
Payload Control System (PCS) 2.X
Glossary of Electrical Terms
Payload Control System (PCS) 2.X
System Schematic
Payload Control System (PCS) 2.X
Calibration
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Electronic Control Module (ECM) - Configure
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Troubleshooting
General Information
Payload Control System (PCS) 2.X
MID 030 - CID 0248 - FMI 02
Caterpillar Monitoring System
Diagnostic Code List
Caterpillar Monitoring System
MID 030 - CID 0821 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0821 - FMI 04
Caterpillar Monitoring System
Alert Indicator Is Always Flashing
Caterpillar Monitoring System
Alert Indicator Never Flashes
Caterpillar Monitoring System
Harness Code
Caterpillar Monitoring System
MID 030 - CID 0819 - FMI 02
Caterpillar Monitoring System
General Information
Caterpillar Monitoring System
MID 082 - CID 0562 - FMI 12
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 081 - CID 0041 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0041 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 082 - CID 0562 - FMI 09
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Diagnostic Capabilities
Caterpillar Monitoring System
MID 081 - CID 0562 - FMI 09
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Using Caterpillar Monitoring System to Determine Diagnostic Codes
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Using Caterpillar Monitoring System to Determine Diagnostic Codes
Caterpillar Monitoring System
General Information
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Using Messenger to Determine Diagnostic Codes
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0591 - FMI 12
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Error and Warning Messages
Payload Control System (PCS) 2.X
Payload Control System Troubleshooting without Diagnostic Codes
Payload Control System (PCS) 2.X
Using Service Display Mode to Determine Diagnostic Codes
Payload Control System (PCS) 2.X
Diagnostic Code List
Payload Control System (PCS) 2.X
MID 074 - CID 0254 - FMI 12
Payload Control System (PCS) 2.X
MID 074 - CID 0254 - FMI 13
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0817 - FMI 04
Payload Control System (PCS) 2.X
MID 074 - CID 0817 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0817 - FMI 12
Payload Control System (PCS) 2.X
MID 074 - CID 0820 - FMI 02
Payload Control System (PCS) 2.X
MID 030 - CID 0819 - FMI 15
Caterpillar Monitoring System
MID 030 - CID 0819 - FMI 31
Caterpillar Monitoring System
Disassembly and Assembly
Instrument Panel (Upper) - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Instrument Panel (Upper) - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Instrument Panel (Lower) - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Instrument Panel (Lower) - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Service Magazine
New Printer Is Used for Caterpillar Payload Control System (PCS) {749P}
2003/06/02
Special Instruction, REHS1640, &quot;Additional Documentation for the Payload Control System&quot; Is Available {0374, 7494}
2003/04/14
Latest Version of Payload Control System (PCS) Software Is Now Available {7620}
2003/05/05
Latest Version of Payload Control System (PCS) Software Is Now Available {7620}
2003/11/10
New Software Available for Payload Control System (PCS) {7494, 7620}
2006/08/14
New Gauges Available {7450}
2010/07/08
Improved VisionLink<SUP>TM</SUP> Software Is Now Available for Certain Caterpillar Machines {7601}
2012/06/07
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
New Software for Standalone Payload Control System (PCS) Is Now Available for Certain G Series II and Series H Medium Wheel Loaders {7494, 7620}
2014/12/05
New Phone Number for VIMS Support Is Now Available for All Cat<SUP>&reg;</SUP> Products Equipped with VIMS {7601}
2015/03/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
New Payload Control System Software Is Now Used on Certain Wheel Loaders {7494, 7620}
2015/08/04
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Payload Control System (PCS) - If Equipped
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Fuses - Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Operator Controls
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Monitoring System
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Autoshift Control
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
General Information
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Weighing Material
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Display Description
Medium Wheel Loaders (MWL) Payload Control System (MWL)
System Setup
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Caterpillar Reference Material
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Additional Reference Material
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Warranty Information
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Calibration
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Operating Modes
Medium Wheel Loaders (MWL) Payload Control System (MWL)
Special Instruction
Payload Control System Printer {7494, 749P}
Payload Control System Printer {7494, 749P}
Specifications
Relay (Secondary Steering Intermediate)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System
Systems Operation
Action Lamp
Caterpillar Monitoring System
Action Alarm
Caterpillar Monitoring System
Display Components
Caterpillar Monitoring System
Speedometer/Tachometer Module
Caterpillar Monitoring System
System Setup Procedure
Payload Control System (PCS) 2.X
Quad Gauge Module
Caterpillar Monitoring System
Monitoring System (Hydraulic Functions)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Rocker Switch (Transmission Neutralizer Override Control)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System
Monitoring System (Braking Functions)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System
Monitoring System (Power Train Functions)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train
Monitoring System (Steering Functions)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Steering System
System Setup
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Additional Key Functions
Payload Control System (PCS) 2.X
Component Description
Payload Control System (PCS) 2.X
Payload Electronic Control Module
Payload Control System (PCS) 2.X
Keypad
Payload Control System (PCS) 2.X
Service Display Mode
Payload Control System (PCS) 2.X
Calibration (Fine Tune)
Payload Control System (PCS) 2.X
Normal Weighing Operation
Payload Control System (PCS) 2.X
General Information
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Sensors
Payload Control System (PCS) 2.X
Calibration
Payload Control System (PCS) 2.X
Payload Control System/PC Off-Board System
Payload Control System (PCS) 2.X
Component Description
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Zero Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Reweigh Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Download Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Weighing Operation
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
General Information
Payload Control System (PCS) 2.X
Custom Service Information
Field Installation of the Payload Control System{7494}
Field Installation of the Payload Control System{7494}
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
Testing and Adjusting
Wiring Harness (Open Circuit) - Test
Payload Control System (PCS) 2.X
Wiring Harness (Short Circuit) - Test
Payload Control System (PCS) 2.X
Implement Hydraulic Service Mode
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Electrical Connector - Inspect
Payload Control System (PCS) 2.X
Electronic Control Module (ECM) - Flash Program
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Electronic Control Module (ECM) - Replace
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Payload Electronic Control Module - Replace
Payload Control System (PCS) 2.X
Position Sensor (Lift Linkage) - Adjust
Payload Control System (PCS) 2.X
Battery (Internal Backup) - Replace
Payload Control System (PCS) 2.X
Glossary of Electrical Terms
Payload Control System (PCS) 2.X
System Schematic
Payload Control System (PCS) 2.X
Calibration
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Electronic Control Module (ECM) - Configure
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Troubleshooting
General Information
Payload Control System (PCS) 2.X
MID 082 - CID 0562 - FMI 12
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 081 - CID 0041 - FMI 04
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0041 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0795 - FMI 07
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 082 - CID 0562 - FMI 09
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 081 - CID 0795 - FMI 03
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0795 - FMI 05
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
MID 081 - CID 0795 - FMI 06
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
Using Caterpillar Monitoring System to Determine Diagnostic Codes
950G Series II Wheel Loader, 962G Series II
Wheel Loader and
IT62G Series II Integrated Toolcarrier Power Train
General Information
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Using Messenger to Determine Diagnostic Codes
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
MID 074 - CID 0591 - FMI 12
Medium Wheel Loaders (MWL) Payload Control System (PCS) 3.0
Error and Warning Messages
Payload Control System (PCS) 2.X
Payload Control System Troubleshooting without Diagnostic Codes
Payload Control System (PCS) 2.X
Using Service Display Mode to Determine Diagnostic Codes
Payload Control System (PCS) 2.X
Diagnostic Code List
Payload Control System (PCS) 2.X
MID 074 - CID 0254 - FMI 12
Payload Control System (PCS) 2.X
MID 074 - CID 0254 - FMI 13
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0364 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 01
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 02
Payload Control System (PCS) 2.X
MID 074 - CID 0769 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0817 - FMI 04
Payload Control System (PCS) 2.X
MID 074 - CID 0817 - FMI 08
Payload Control System (PCS) 2.X
MID 074 - CID 0817 - FMI 12
Payload Control System (PCS) 2.X
MID 074 - CID 0820 - FMI 02
Payload Control System (PCS) 2.X
Disassembly and Assembly
Instrument Panel (Upper) - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Instrument Panel (Upper) - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Instrument Panel (Lower) - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Instrument Panel (Lower) - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Service Magazine
Correction to Operation and Maintenance Manual , "Air Inlet Heater Starting Aid - If Equipped" {1090}
2003/02/03
New Printer Is Used for Caterpillar Payload Control System (PCS) {749P}
2003/06/02
Latest Version of Payload Control System (PCS) Software Is Now Available {7620}
2003/11/10
Improvements to the Bezel of the Dashboard {7451}
2008/08/11
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
New Payload Control System Software Is Now Used on Certain Wheel Loaders {7494, 7620}
2015/08/04
Specifications
Governor Pedal
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Position Sensor (Throttle)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Service Magazine
Accelerator Hinge Pin Instructions Are Now Included with Parts Kit {1276}
2004/04/26
Special Instruction
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Technical Information Bulletin
Product Link Registration Problems{733T, 7606}
Product Link Registration Problems{733T, 7606}
Tool Operating Manual
317-7492 Wireless Radio{7338}
317-7492 Wireless Radio{7338}
Service Magazine
Improved Radio Speaker Assembly Is Now Available for Certain Cat Products {7301, 7338}
2012/01/31
Improved Speakers Now Used {7338}
2003/08/11
New Processes Improve Registration of Product Link {7338, 7606}
2008/04/14
A New Antenna For The Product Link Is Available {7010, 733T}
2008/06/09
Special Instruction
Inspection, Maintenance, and Repair of Operator Protective Structures (OPS) and Attachment Installation Guidelines for All Earthmoving Machinery, If Equipped {7323, 7325}
Inspection, Maintenance, and Repair of Operator Protective Structures (OPS) and Attachment Installation Guidelines for All Earthmoving Machinery, If Equipped {7323, 7325}
Technical Information Bulletin
Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS) {7323, 7325, 7715}
Maintaining the Protective Structure (ROPS/FOPS) Certification when Making Modifications To (ROPS/FOPS) {7323, 7325, 7715}
Service Magazine
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27
Operation and Maintenance Manual
Seat
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Seat Belt - Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Seat Belt - Inspect
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Seat Belt
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Installation Instruction for 212-7779 Shock Absorber Kit , 192-7848 Shock Absorber Kit , and 213-5170 Indicator Kit on Toggle Link Vertical (TLV) Seat Suspensions {7324}
Installation Instruction for 212-7779 Shock Absorber Kit , 192-7848 Shock Absorber Kit , and 213-5170 Indicator Kit on Toggle Link Vertical (TLV) Seat Suspensions {7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Technical Information Bulletin
Operator Seat Belt Not Retracting {7327}
Operator Seat Belt Not Retracting {7327}
Systems Operation
Mechanical Suspension
Contour Series Seat
Comfort Seat Air Suspension with Air Compressor
Comfort Series Seat For Caterpillar Machines
Comfort Seat with Lumbar, Side Controls, and Slide Swivel
Comfort Series Seat For Caterpillar Machines
Serial Number Effectivity
Comfort Series Seat For Caterpillar Machines
Comfort Seat Air Suspension with System Air
Comfort Series Seat For Caterpillar Machines
Comfort Seat Controls
Comfort Series Seat For Caterpillar Machines
Optimized Seat Air Suspension with Air Compressor
Comfort Series Seat For Caterpillar Machines
Optimized Seat Controls
Comfort Series Seat For Caterpillar Machines
Optimized Seat with Lumbar, Side Controls, and Slide Swivel
Comfort Series Seat For Caterpillar Machines
Seat Maintenance Interval Schedule
Comfort Series Seat For Caterpillar Machines
General Information
Comfort Series Seat For Caterpillar Machines
Component Descriptions
Comfort Series Seat For Caterpillar Machines
Troubleshooting
Comfort Series Seat For Caterpillar Machines
General Information
Caterpillar Advanced Ride Management (CARM) Seat Suspension System
Component Descriptions
Caterpillar Advanced Ride Management (CARM) Seat Suspension System
Testing and Adjusting
Troubleshooting Chart
Comfort Series Seat For Caterpillar Machines
Troubleshooting
Troubleshooting
Caterpillar Advanced Ride Management (CARM) Seat Suspension System
Disassembly and Assembly
Swivel Seat - Disassemble
Comfort Series Seat For Caterpillar Machines
Swivel Seat - Assemble
Comfort Series Seat For Caterpillar Machines
Air Suspension With Toggle Switch Height Adjustment - Disassemble
Contour Series Seat
Air Suspension With Toggle Switch Height Adjustment - Assemble
Comfort Series Seat For Caterpillar Machines
Air Suspension With System Air - Disassemble
Comfort Series Seat For Caterpillar Machines
Air Suspension With System Air - Assemble
Comfort Series Seat For Caterpillar Machines
Mechanical Suspension With Fixed Damper - Disassemble
Comfort Series Seat For Caterpillar Machines
Mechanical Suspension With Fixed Damper - Assemble
Contour Series Seat
Mechanical Suspension With Variable Damper - Disassemble
Comfort Series Seat For Caterpillar Machines
Mechanical Suspension With Variable Damper - Assemble
Contour Series Seat
Comfort Seat with Lumbar Option and Side Controls - Disassemble
Comfort Series Seat For Caterpillar Machines
Comfort Seat with Lumbar Option and Side Controls - Assemble
Comfort Series Seat For Caterpillar Machines
Seat - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Seat - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Air Suspension with Air Valve Knob Height Adjustment - Disassemble
Contour Series Seat
Air Suspension With Air Valve Knob Height Adjustment - Assemble
Comfort Series Seat For Caterpillar Machines
Comfort Seat Air Suspension with Air Compressor - Assemble
Comfort Series Seat For Caterpillar Machines
Comfort Seat Air Suspension with Air Compressor - Disassemble
Comfort Series Seat For Caterpillar Machines
Comfort Seat with Front Controls - Disassemble
Comfort Series Seat For Caterpillar Machines
Comfort Seat with Front Controls - Assemble
Comfort Series Seat For Caterpillar Machines
Optimized Seat with Front Controls - Disassemble and Assemble
Comfort Series Seat For Caterpillar Machines
Service Magazine
An Improved Seat Suspension System is Now Available {7324}
2007/07/30
An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/12/09
A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324}
A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324}
An Increased Capacity Shock is Now Available for Cat Comfort Seats That Are Equipped With Toggle Link Vertical Suspensions {7324}
2009/09/21
Special Instruction
Procedure for Changing a Hydraulic Control Support That Has Three Bearings to a Hydraulic Control Support That Has Four Bearings{5258}
Procedure for Changing a Hydraulic Control Support That Has Three Bearings to a Hydraulic Control Support That Has Four Bearings{5258}
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Troubleshooting
Service Tools
Payload Control System (PCS) 2.X
Operation and Maintenance Manual
Window Washer Reservoir - Fill
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Installation Instructions for the 264-3559 Window Guard Ar (KIT) and the 265-3936 Window Guard Ar (Kit){7165, 7182, 7310}
Installation Instructions for the 264-3559 Window Guard Ar (KIT) and the 265-3936 Window Guard Ar (Kit){7165, 7182, 7310}
Service Magazine
Washer Pump Assemblies Must Be Primed Properly {7306}
2002/12/23
Operation and Maintenance Manual
Windows - Clean
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Alternate Exit
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Special Instruction
Replacing Bonded Windows {7310}
Replacing Bonded Windows {7310}
Service Magazine
Washer Pump Assemblies Must Be Primed Properly {7306}
2002/12/23
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
2009/11/02
Operation and Maintenance Manual
Window Wiper - Inspect/Replace
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Specifications
Window Wiper and Wiper Motor
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Disassembly and Assembly
Window Wiper and Wiper Motor (Rear) - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Window Wiper and Wiper Motor (Rear) - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Window Wiper and Wiper Motor (Front) - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Window Wiper and Wiper Motor (Front) - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Service Magazine
Washer Pump Assemblies Must Be Primed Properly {7306}
2002/12/23
The Length of the Wires Leading to the Wiper Motor Have Been Lengthened to Improve Reliability {5927, 7305}
2005/12/19
Improved Window Wiper Motors Now Used {7305}
2008/11/10
Special Instruction
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>&reg;</SUP> Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Service Magazine
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>&reg;</SUP> Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Special Instruction
Instructions for Field Conversion to a Electrohydraulic Joystick {5702, 5705}
Instructions for Field Conversion to a Electrohydraulic Joystick {5702, 5705}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>&reg;</SUP> Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Electrohydraulic Control (Joystick)
950G Series II Wheel Loader, 962G Series II
Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Electrohydraulic Control
950G Series II Wheel Loader, 962G Series II
Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Service Letter-Asia
Systems Operation
Sensors
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Switches
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Electrohydraulic Control
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE THIRD LEVER IMPLEMENT CONTROL ON CERTAIN 950G II, 962GII, 966G II, 972G II, AND 980G II WHEEL LOADERS
Testing and Adjusting
Position Sensor for the Control Lever (Electronic Technician) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Control Lever (Caterpillar Monitoring System) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Joystick Control (Caterpillar Monitoring System) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Joystick Control (Electronic Technician) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Troubleshooting
MID 082 - CID 0361 - FMI 05
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0361 - FMI 06
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0360 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0360 - FMI 05
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0360 - FMI 06
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0359 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0359 - FMI 05
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0359 - FMI 06
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 1713 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 1713 - FMI 05
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 1713 - FMI 06
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
MID 082 - CID 0361 - FMI 03
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Disassembly and Assembly
Electrohydraulic Control - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Electrohydraulic Control - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Service Magazine
Improved Procedure for Adjusting The Bracket Assembly In The Control Group On Certain Wheel Loaders {5702}
2010/10/01
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>&reg;</SUP> Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Special Instruction
Instructions for Field Conversion to a Electrohydraulic Joystick {5702, 5705}
Instructions for Field Conversion to a Electrohydraulic Joystick {5702, 5705}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>&reg;</SUP> Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Testing and Adjusting
Position Sensor for the Joystick Control (Caterpillar Monitoring System) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Position Sensor for the Joystick Control (Electronic Technician) - Calibrate
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System
Service Magazine
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>&reg;</SUP> Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Disassembly and Assembly
Pilot Operated Hydraulic Control (Joystick) - Disassemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Assemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control - Disassemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control - Assemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Machine Systems
Technical Information Bulletin
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
Operation and Maintenance Manual
Autoshift Control
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders
Technical Information Bulletin
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27

Truck sale:

Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
FINANZAUTO S.A.
Caterpillar 950G II, Wheel Loaders, Construction
79,420 
Caterpillar 950G II, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
 
Caterpillar 950GII
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950G II
 
Caterpillar 950G II
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Caterpillar 950GII
 
Caterpillar 950GII
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.